AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4N-2117 HOUSING GP-FUEL PUMP PART OF 4W-6073 PUMP GP-FUEL INJECTION AN ATTACHMENT 3412 MARINE ENGINE


FUEL SYSTEM
PUMP GP-FUEL INJECTION
LINES GP-FUEL INJECTION
LINES GP-FUEL
FUEL SYSTEM GP
LINES GP-FUEL
FILTER GP-FUEL

MARINE ENGINE 3412 MARINE ENGINE 60M
 3412C Marine Engine 60M05161-UP SEBP3179 3412 60M   (1976)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
DRIVE GP-GOVERNOR & FUEL PUMP
9Y-5457 DRIVE GP-GOVERNOR & FUEL PUMP
FASTENER GP-FUEL INJ PUMP
9Y-3336 FASTENER GP-FUEL INJ PUMP
HOUSING GP-FUEL PUMP
4N-2117 HOUSING GP-FUEL PUMP
HOUSING GP-FUEL PUMP
7N-6124 HOUSING GP-FUEL PUMP
INJECTOR GP-FUEL
4W-7018 INJECTOR GP-FUEL
INJECTOR GP-FUEL
4W-7019 INJECTOR GP-FUEL
 

#SEBP31790320
 

4N-2117: HOUSING GP-FUEL PUMP

4N-2117 HOUSING GP-FUEL PUMP
PART OF 4W-6073 PUMP GP-FUEL INJECTION
AN ATTACHMENT
i00370045 SEBP3179
4N2117 HOUSING GP-FUEL PUMP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-7266 [1] SHAFT-PUMP IDLER  
2. 7N-0242 C [2] BUSHING  
3. 5B-9318 [1] BALL  
4. 1S-7984 [2] BUSHING  
5. 2M-2489 [2] SEAL-LIP TYPE  
6. 4M-1474 [6] PIN-LIFTER GUIDE  
7. 9L-9766 [2] PIN-PLUNGER LIFT  
8. 1P-0232 [12] BALL  
  1P-0234 [12] DOWEL  
9. 1S-2199 [1] DOWEL  
10. 9S-4160 [2] BUSHING  
11. 6N-8442 [1] BUSHING  
12. 7M-5839 [1] PLUG-CUP  
13. 6N-8441 [2] BUSHING  
14. 4N-0775 [2] DOWEL-HOLLOW  
15. 8L-6565 [1] PIN-SPRING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP31790321
 

7N-6124: HOUSING GP-FUEL PUMP

7N-6124 HOUSING GP-FUEL PUMP
PART OF 108-3696, 4W-6068, 4W-8680 PUMP GP-FUEL INJECTION
i00108854 SEBP3179
7N6124 HOUSING GP-FUEL PUMP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-7266 [1] SHAFT-PUMP IDLER  
2. 7N-0242 C [2] BUSHING  
3. 8L-6565 [1] PIN-SPRING  
4. 4N-0952 C [1] PLUG-CUP  
5. 5B-9318 C [1] BALL  
6. 4M-1474 [1] PIN-LIFTER GUIDE  
7. 9L-9766 [2] PIN-PLUNGER LIFT  
8. 1P-0232 [12] BALL  
  1P-0234 [12] DOWEL  
9. 1S-2199 [1] DOWEL  
10. 9S-4160 [2] BUSHING  
11. 6N-8442 [1] BUSHING  
12. 7M-5839 [1] PLUG-CUP  
13. 6N-8441 [2] BUSHING  
14. 4N-0775 [2] DOWEL-HOLLOW  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP31790322
 

4W-7018: INJECTOR GP-FUEL

4W-7018 INJECTOR GP-FUEL
PART OF 4P-9354, 4P-9355, 5N-9004, 5N-9578, 7C-3431 KIT-ENGINE PARTS, 2W-8065 LINES GP-FUEL INJECTION
ALSO AN ATTACHMENT
i00107977 SEBP3179
4W7018 INJECTOR GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-9098 [1] SEAL-CARBON STOP  
2. 7W-4482 [1] WASHER (17.14X9.76X3.18-MM THK)  
3. 271-2489 [1] SEAL-WASHER  
4. 9X-2836 [1] SCREW-BUTTON HEAD  
5. 114-3362 [1] SEAL-O-RING  
6. 1W-8791 [1] TIP AS-FUEL INJECTOR  
 

#SEBP31790323
 

4W-7019: INJECTOR GP-FUEL

4W-7019 INJECTOR GP-FUEL
PART OF 131-5517, 131-5518, 4P-9353, 4P-9356, 5N-1715, 5N-8530 KIT-ENGINE PARTS, 4W-9008 LINES GP-FUEL INJECTION
ALSO AN ATTACHMENT
i03601661 SEBP3179
4W7019 INJECTOR GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-9098 [1] SEAL-CARBON STOP  
2. 7W-4482 [1] WASHER (17.14X9.76X3.18-MM THK)  
3. 271-2489 [1] SEAL-WASHER  
4. 9X-2836 [1] SCREW-BUTTON HEAD  
5. 1W-3994 [1] CHECK-INJECTION VALVE  
6. 4W-8094 [1] TIP AS-FUEL INJECTOR  
7. 114-3362 [1] SEAL-O-RING  
 

#SEBP31790324
 

6I-4813: KIT-FUEL INJECTION LINES CLAMP

6I-4813 KIT-FUEL INJECTION LINES CLAMP
FIELD INSTALLATION
i00650850 SEBP3179
6I4813 KIT-FUEL INJECTION LINES CLAMP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-2731 [1] PLATE AS  
2. 6I-4811 [2] DAMPER-INJECTION LINE  
3. 6I-4812 [1] CLAMP-INJECTION LINE  
4. 7M-9831 [1] SCREW-MACHINE (10-24X0.88-IN)  
5. 6D-3848 [1] WASHER (5.16X18.64X1.91-MM THK)  
 

#SEBP31790325
 

436-8387: KIT-FUEL SYSTEM GASKET

436-8387 KIT-FUEL SYSTEM GASKET
247.7 X 298.5 X 38.1 MM. CLASSIC PART
FIELD INSTALLATION
i07310690 SEBP3179
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP31790326
 

3N-6668: LINES GP-FLEXIBLE FUEL

3N-6668 LINES GP-FLEXIBLE FUEL
AN ATTACHMENT
i00366588 SEBP3179
3N6668 LINES GP-FLEXIBLE FUEL Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2L-3331 C [2] CONNECTOR-PIPE  
2. 3N-6667 I [2] HOSE AS  
3. 003-2143 C [1] ELBOW  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP31790327
 

6N-4609: LINES GP-FUEL FILTER

6N-4609 LINES GP-FUEL FILTER
LH MOUNTING
FOR USE WITH WATERCOOLED EXHAUST MANIFOLD
AN ATTACHMENT
i00387087 SEBP3179
6N4609 LINES GP-FUEL FILTER Parts scheme 6N4609 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-3971 C [1] BRACKET AS-FUEL FILTER  
2. 4B-4043 [4] BOLT (5/8-11X1.375-IN)  
3. 4D-3704 [4] WASHER-HARD (17X30X5-MM THK)  
5. 5M-2894 BC [18] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 6N-3879 I [1] HOSE AS  
7. 6N-4377 I [2] HOSE AS  
8. 2P-7214 [2] ADAPTER-ELBOW  
9. 3J-1907 [8] SEAL-O-RING  
10. 7J-4026 [1] ELBOW  
11. 030-7947 C [3] ADAPTER-ELBOW  
12. 6N-4378 I [1] HOSE AS  
13. 9S-4182 [1] PLUG (7/16-20-THD)  
14. 3J-7354 [1] SEAL-O-RING  
15. 9S-4191 [1] PLUG (9/16-18-THD)  
16. 0T-0102 B [2] BOLT (3/8-16X0.625-IN)  
17. 7D-7233 [3] CLIP (LOOP)  
18. 6N-3797 [1] JUNCTION BLOCK  
19. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
20. 0T-0065 C [1] BOLT (3/8-16X3.5-IN)  
21. 3B-1915 C [4] BOLT (3/8-16X1.375-IN)  
22. 9S-8752 [4] NUT-FULL (3/8-16-THD)  
23. 4D-7733 [1] CLIP (LOOP)  
24. 6K-0806 [4] STRAP-CABLE  
26. 9X-7378 C [2] SEAL-O-RING  
27. 4W-1968 [1] DAMPER-SURGE  
28. 6V-8349 C [1] TEE-O-RING PORT  
29. 9F-2247 [1] PLUG-PIPE (1/8-27-THD)  
30. 6K-9194 [1] ELBOW  
31. 030-7942 [1] ELBOW  
32. 0S-1619 [1] BOLT (3/8-16X3-IN)  
33. 0S-1608 [1] BOLT (3/8-16X3.75-IN)  
34. 6H-7127 [1] SPACER (13/32X5/8X9/16-IN THK)  
36. 0S-1594 [3] BOLT (3/8-16X1-IN)  
37. 0T-0573 [1] BOLT (3/8-16X2.75-IN)  
38. 6K-7808 J [1] BAR  
39. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
40. 2F-4967 C [2] SPACER (10.5X19X5.512-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   USE WITH LH MOUNTED
 

#SEBP31790328
 

6N-9316: LINES GP-FUEL FILTER

6N-9316 LINES GP-FUEL FILTER
i00554937 SEBP3179
6N9316 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1351 [8] BOLT (3/8-16X0.875-IN)  
2. 5M-2894 [13] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 2P-7214 [2] ADAPTER-ELBOW  
4. 3J-1907 [8] SEAL-O-RING  
5. 7J-4026 [1] ELBOW  
6. 6N-4379 I [1] HOSE AS  
7. 6N-4376 I [1] HOSE AS  
8. 9S-4182 [1] PLUG (7/16-20-THD)  
9. 9S-4191 [1] PLUG (9/16-18-THD)  
10. 030-7947 [1] ADAPTER-ELBOW  
11. 6N-4377 I [1] HOSE AS  
12. 0S-1588 [3] BOLT (3/8-16X1.25-IN)  
13. 2R-6806 [1] CONNECTOR  
14. 0S-1591 C [1] BOLT (3/8-16X1.5-IN)  
15. 3J-7354 C [3] SEAL-O-RING  
16. 7D-7233 [3] CLIP (LOOP)  
17. 6V-8349 C [1] TEE-O-RING PORT  
18. 4W-1968 C [1] DAMPER-SURGE  
19. 3B-1915 [1] BOLT (3/8-16X1.375-IN)  
20. 0S-1619 [1] BOLT (3/8-16X3-IN)  
    (USE WITH AFTERCOOLER)
  1A-2029 [1] BOLT (3/8-16X1.125-IN)  
    (USE WITHOUT AFTERCOOLER)
21. 103-7481 I [1] HOSE AS  
22. 6K-0806 [6] STRAP-CABLE  
23. 4D-7733 [1] CLIP (LOOP)  
24. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
25. 3B-1915 [1] BOLT (3/8-16X1.375-IN)  
  0T-0065 [1] BOLT (3/8-16X3.5-IN)  
26. 8N-3962 [1] BRACKET AS-FUEL FILTER  
27. 4B-4043 [4] BOLT (5/8-11X1.375-IN)  
  4D-3704 [4] WASHER-HARD (17X30X5-MM THK)  
28. 6N-3797 [1] JUNCTION BLOCK  
29. 8M-2773 [1] CLIP (LOOP)  
30. 030-7942 [1] ELBOW  
31. 2F-4967 [2] SPACER (10.5X19X5.512-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP31790329
 

7N-2637: LINES GP-FUEL FILTER

7N-2637 LINES GP-FUEL FILTER -RH
DUPLEX
AN ATTACHMENT
i00408695 SEBP3179
7N2637 LINES GP-FUEL FILTER Parts scheme 7N2637 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-6492 [1] DAMPER-SURGE  
2. 030-9208 [1] TEE  
3. 3J-1907 [3] SEAL-O-RING  
4. 8L-6557 [1] CONNECTOR  
5. 5P-4837 [1] ADAPTER  
6. 8M-2773 [1] CLIP (LOOP)  
  0L-1351 [1] BOLT (3/8-16X0.875-IN)  
7. 7D-7233 [3] CLIP (LOOP)  
8. 3B-1915 B [1] BOLT (3/8-16X1.375-IN)  
9. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
10. 0S-1619 B [1] BOLT (3/8-16X3-IN)  
  1A-2029 [1] BOLT (3/8-16X1.125-IN)  
11. 2P-7214 [1] ADAPTER-ELBOW  
12. 6K-0806 [7] STRAP-CABLE  
13. 6K-9194 [1] ELBOW  
14. 030-7947 [2] ADAPTER-ELBOW  
15. 0S-1590 [1] BOLT (3/8-16X2-IN)  
  1B-4971 [1] SPACER (0.406X1X1-IN THK)  
  5M-2894 B [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 0S-1588 [1] BOLT (3/8-16X1.25-IN)  
  5M-2894 B [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
17. 6N-8968 I [1] HOSE AS  
18. 7N-2638 I [1] HOSE AS  
19. 6N-4377 I [1] HOSE AS  
20. 3B-1915 [3] BOLT (3/8-16X1.375-IN)  
  1D-4717 [3] NUT (3/8-16-THD)  
21. 5M-2894 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
22. 6K-9194 [1] ELBOW  
23. 030-7947 [2] ADAPTER-ELBOW  
24. 3J-1907 [3] SEAL-O-RING  
25. 6N-9626 I [1] HOSE AS  
26. 7J-4026 [1] ELBOW  
27. 0S-1619 [1] BOLT (3/8-16X3-IN)  
28. 0S-1608 [1] BOLT (3/8-16X3.75-IN)  
  6H-7127 B [1] SPACER (13/32X5/8X9/16-IN THK)  
29. 1A-2029 B [1] BOLT (3/8-16X1.125-IN)  
30. 3B-1915 C [1] BOLT (3/8-16X1.375-IN)  
  0T-0065 C [1] BOLT (3/8-16X3.5-IN)  
31. 8N-3962 C [1] BRACKET AS-FUEL FILTER  
32. 4B-4043 [4] BOLT (5/8-11X1.375-IN)  
  4D-3704 [4] WASHER-HARD (17X30X5-MM THK)  
33. 6K-0806 [1] STRAP-CABLE  
34. 2F-4967 C [2] SPACER (10.5X19X5.512-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

Information:

Engine News
New Fuel Injection Lines Groups Use A Different Fuel Injection Nozzle Assembly
1979/03/07
Conversion Group Available To Install Woodward Governor On Engines Equipped With Mechanical Governor
1979/04/25
Use New Adapter To Make Tests Of 9L6884 Nozzles
1979/05/09
To Prevent A Possible Change In The Fuel Rack Setting, A Specific Assembly Procedure Must Be Used To Tighten The Bolt On The Governor Stop Collar
1979/08/08
Identification Of Fuel Injection Lines And Nozzle Bodies For Different Combustion Systems
1980/02/27
Improvements To Optional Modification Of 5P4150 Nozzle Tester
1981/08/26
Explanation Of Differences In Timing Advance Information
1981/08/26
Part Number For Fuel Injection Pump Group In New Location
1981/11/25
New Fuel Nozzle Adapter Assembly Used
1982/02/24
New Idler Shaft Used In Fuel Transfer Pumps
1982/02/24
Fuel Rack Slots Have Improved Wear Resistance
1982/05/12
Changes In Engine RPM; Governor Does Not Operate Correctly
1982/10/20
New Fuel Nozzle Test Sheet Available
1982/10/20
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
Changes In Engine RPM; Governor Does Not Operate Correctly
1983/01/19
Change 6V3060 EGR Testers To LES Testers
1983/04/27
New Fuel Nozzle Adapters Used
1983/05/25
New Specification For Clearance Between Fuel Rack Slot And Cross Link
1983/05/25
Improved Governor Control Shaft And Seal Will Help Prevent Oil Leakage
1983/07/06
Service Information For Woodward Governors
1983/10/26
New Valve Lifter Assemblies Used In Valve Mechanism Groups
1983/11/30
Procedure To Remove Sharp Edges From Fuel Racks
1984/02/22
New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position
1984/03/07
New Seal For Fuel Injection Pump Housing Is More Resistant To Heat Damage
1984/05/16
Fill Oil Sump Before Installing Woodward Governor
1985/01/16
Cross Link Between Fuel Racks Has Smoother Surface
1985/03/01
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01
New Cylinder Heads And Fuel Nozzle Adapters Used
1985/07/01
Changes To Fuel Systems
1985/09/01
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed
1986/10/01
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters
1987/10/01
Improved Valve Mechanism Cover Groups
1988/01/01
New Fuel Shutoff Solenoid Assembly Used
1988/11/01
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles
1989/03/01
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque
1989/09/01
New Throttle Shaft Bearing Sleeves Used In Governor Housing Assembly
1990/08/01
Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups
1991/05/01
Corrections For Systems Operation, Troubleshooting, And Specifications For 2301 Electric Governors For Generator Set And Industrial Engines, SENR2928-01
1991/05/01
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN)
1992/04/01
New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups
1993/05/01
New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups
1993/12/01
New Diaphragm Used In Governor Air Actuator Group Improves Service Life{1265}
1994/01/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/01
Additional Clamp Used In Fuel Injections Lines Groups{1252}
1994/08/01
Procedure To Increase Fuel Transfer Pump Pressure {1256}
1995/04/01
Pressure Compensated Simple Governor (PSG Governor) Changes From Aluminum To Cast Iron Housing {1264}
1995/04/01
New Brackets Help Prevent Damage To Engine Fuel Injection Lines Groups{1252}
1996/02/16
Fuel Injection Pump Barrel Sealing Face Reconditioning{1251}
1996/03/19
New 5P4185 Fuel Pump Timing Pin To Be Used Only On 3408 And 3412 Engines
1977/05/13
Improvements To Fuel Injection Pump And Governor
1977/06/08
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Fuel Transfer Pump Shaft With Chromium Plate
1977/10/12
Change In Design Of Engine Governor, Fuel Injection And Transfer Pump Groups, And Fuel Ratio Control Groups
1978/02/08
O-Ring Seals Of A Different Material Are Now Used On The Outside Diameter Of The Servo Cylinder In Governors
1978/05/03
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned
1978/08/16
Different O-Ring Seals Now Used In Fuel Injection Pump Group
1978/08/30
The Edge Filter Is Now Removed from Fuel Nozzles {1254, 1290}
2007/08/20
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Improved Manufacturing Processes Are Used for Remanufactured Fuel Injector Nozzles That Are Used in Certain Commercial Engines {1251, 1290}
2012/07/06
Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain Commercial Engines {1250, 1251, 1290, 1713}
2013/10/17
Special Instruction
Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}
Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Use Of 6V-4180 Timing Fixture Group To Check Off-Engine Timing Dimension Setting{1251, 0653}
Use Of 6V-4180 Timing Fixture Group To Check Off-Engine Timing Dimension Setting{1251, 0653}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Installation Of 6N6193 Governor Adapter Plate Service Group{1264}
Installation Of 6N6193 Governor Adapter Plate Service Group{1264}
Installation Of 4N779 And 7N6124 Fuel Injection Pump Housing Assemblies Or Fuel Injection Pump Groups{1251, 1253}
Installation Of 4N779 And 7N6124 Fuel Injection Pump Housing Assemblies Or Fuel Injection Pump Groups{1251, 1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N3104 Governor Conversion Group (Woodward PSG){1250}
Installation Of 8N3104 Governor Conversion Group (Woodward PSG){1250}
Installation Of 8N618, 8N619, 8N620 And 8N621 Ether Starting Aid Groups{1456}
Installation Of 8N618, 8N619, 8N620 And 8N621 Ether Starting Aid Groups{1456}
Installation Of 7N7783 Sleeve And 8N6579 Spring Or 8N7526 Governor Group{1264}
Installation Of 7N7783 Sleeve And 8N6579 Spring Or 8N7526 Governor Group{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Installation Of 5N5340, 2W3536 And 2W3537 Fuel Injection Lines Groups And 2W5100 Fuel Lines Drain Group{1250, 1252}
Installation Of 5N5340, 2W3536 And 2W3537 Fuel Injection Lines Groups And 2W5100 Fuel Lines Drain Group{1250, 1252}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles{1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Fuel System Identification
3412 INDUSTRIAL AND MARINE ENGINES
Fuel Injection
3412 INDUSTRIAL AND MARINE ENGINES
Engines With Capsule - Type Nozzles
3412 INDUSTRIAL AND MARINE ENGINES
Fuel Injection Nozzle And Adapter (Earlier 7000 Series Nozzle Assembly)
3412 INDUSTRIAL AND MARINE ENGINES
Fuel Injection Nozzle And Adapter (Later 7000 Series Nozzle Assembly)
3412 INDUSTRIAL AND MARINE ENGINES
Governor
3412 INDUSTRIAL AND MARINE ENGINES
Fuel Injection Pump Housing (Earlier)
3412 INDUSTRIAL AND MARINE ENGINES
Fuel Injection Pump Housing (Later)
3412 INDUSTRIAL AND MARINE ENGINES
Governor Drive And Oil Pump
3412 INDUSTRIAL AND MARINE ENGINES
Governor And Fuel Pump Drive (Automatic Timing Advance Unit) (Standard Engine)
3412 INDUSTRIAL AND MARINE ENGINES
Governor And Fuel Pump Drive (Automatic Timing Advance Unit) (Low Speed Engine)
3412 INDUSTRIAL AND MARINE ENGINES
Fuel Ratio Control
3412 INDUSTRIAL AND MARINE ENGINES
Fuel Transfer Pump
3412 INDUSTRIAL AND MARINE ENGINES
Fuel Transfer Pump Drive
3412 INDUSTRIAL AND MARINE ENGINES
Woodward PSG Governor
3412 INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Governor Linkage
3412 INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Governor Controls
3412 INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Governor Air Actuator
3412 INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Fuel Injection Nozzles and Adapters
3408C and 3412C Marine Engines
Fuel Injection Pump
3408C and 3412C Marine Engines
Fuel Injection Pump Housing
3408C and 3412C Marine Engines
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Fuel Transfer Pump
3408C & 3412C MARINE ENGINES
Fuel Injection Pumps
3408C & 3412C MARINE ENGINES
Governor & Fuel Pump Drive
3408C & 3412C MARINE ENGINES
Fuel Injection Pump Housing & Governor
3408C & 3412C MARINE ENGINES
Governor
3408C & 3412C MARINE ENGINES
Fuel Injection Valves (Precombustion Chamber)
3408C & 3412C MARINE ENGINES
Fuel Injection Valves (Direct Injection)
3408C & 3412C MARINE ENGINES
Fuel Injection Nozzles & Adapters
3408C & 3412C MARINE ENGINES
Direct Injection Adapters
3408C & 3412C MARINE ENGINES
Fuel Injection Lines
3412 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3412 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3412 INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance
3412 INDUSTRIAL & MARINE ENGINES
Governor (Low Speed Engine)
3412 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing & Governor
3412 INDUSTRIAL & MARINE ENGINES
Fuel Injection Valves (Precombustion Chamber)
3412 INDUSTRIAL & MARINE ENGINES
Fuel Injection Valves (Direct Injection)
3412 INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzles
3412 INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzles & Adapters (Later 7000 Series)
3412 INDUSTRIAL & MARINE ENGINES
Direct Injection Adapters
3412 INDUSTRIAL & MARINE ENGINES
Rocker Shaft Assembly
3412 INDUSTRIAL & MARINE ENGINES
Service Magazine
Identification Of Fuel Injection Lines And Nozzle Bodies For Different Combustion Systems{1252,1254}
1980/02/25
Modification Of 5P1768 Pointer Assembly Necessary For Use On Some Fuel Injection Pump Housings{1253,0653}
1980/03/31
Special Cup Plugs For Use In Oversize (Larger Than Standard Size) Bores In Valve Rocker Arm Shafts{1102}
1980/09/15
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Part Number For Fuel Injection Pump Group In New Location{1253,1286}
1981/11/09
New Fuel Nozzle Adapter Assembly Used{1106}
1982/02/15
New Idler Shaft Used In Fuel Transfer Pumps{1256}
1982/02/22
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Changes In Engine RPM; Governor Does Not Operate Correctly{1264}
1982/10/18
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter{1106}
1982/10/18
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Changes In Engine RPM; Governor Does Not Operate Correctly{1264}
1983/01/10
New Fuel Nozzle Adapters Used{1106}
1983/05/09
New Double-Wall Fuel Injection Lines Group And Fuel Drain Group Available As Attachments For Protection Against Fuel Leakage{1252,1254,7400}
1983/06/20
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Procedure To Remove Sharp Edges From Fuel Racks {1257,1253}
1984/02/06
New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position{1106,1252}
1984/02/27
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage{1264}
1984/05/14
New Seal For Fuel Injection Pump Housing Is More Resistant To Heat Damage{1253}
1984/05/14
Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
New Cylinder Heads And Fuel Nozzle Adapters Used{1101,1106}
1985/07/01
Extra Injection Nozzle Clamp Helps Prevent Injection Nozzle Damage{1252}
1985/07/15
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Steel Fuel Pump Lifter Used{1250,1251}
1985/09/02
Changes To Fuel Systems {1250,1251,1252,1253,1254,1100}
1985/09/16
Cylinder Head And Valve Rocker Arm Brackets Have Oil Supply Passages In A Different Location To Prevent Possible Oil Leakage Into Cooling System {1100,1102,1350}
1985/10/21
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
Use Insert To Repair Bearing Seat In Water Pump Housing{1361}
1977/03/07
New Retainer And Improved Housing Keep Water Pump Bearing Tight; Repair For Loosened Bearing{1361}
1977/04/11
New 5P4185 Fuel Pump Timing Pin To Be Used Only On 3408 And 3412 Engines{0650,1257}
1977/05/16
Improvements To Fuel Injection Pump And Governor{1286}
1977/06/06
Fuel Transfer Pump Shaft With Chromium Plate{1256}
1977/10/10
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters {1281,1250}
1987/09/28
Change In Design Of Engine Governor, Fuel Injection And Transfer Pump Groups, And Fuel Ratio Control Groups{1264,1278,1286}
1978/01/23
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
New Tachometer Drive Adapter Assembly Prevents Failure Of The Seals For the Tachometer Drive Group And Transfer Pump{7462,1256}
1978/02/27
Soft Washers And Lockwashers Are Now Used With The Mounting Bolts For Air-Fuel Ratio Control{1278,1264}
1978/03/13
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
O-Ring Seals Of A Different Material Are Now Used On The Outside Diameter Of The Servo Cylinder In Governors{1264}
1978/05/01
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned{1254,1101}
1978/08/07
Different O-Ring Seals Now Used In Fuel Injection Pump Group{1251}
1978/08/28
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Ether Starting Aid Groups Are Now Available{1456}
1979/01/22
New Fuel Injection Lines Groups Use A Different Fuel Injection Nozzle Assembly{1254}
1979/03/12
Conversion Group Available To Install Woodward Governor On Engines Equipped With Mechanical Governor{1264}
1979/04/09
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
To Prevent A Possible Change In The Fuel Rack Setting, A Specific Assembly Procedure Must Be Used To Tighten The Bolt On The Governor Stop Collar{1259,1257,1250}
1979/07/02
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups{1251,1253}
1991/05/20
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups {1252}
1993/05/17
New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups {1252}
1993/11/15
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Improved Governor Servo Components Available For Use With Energize To Run Solenoids; Energize To Run Solenoid Stop Bolt Adjustment Procedure{1264,1259}
1996/06/03
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14

Caterpillar Parts SIS Catalog 3412 :

HOUSING AS-GOVERNOR DRIVE
2W-4533 HOUSING AS-GOVERNOR DRIVE
GOVERNOR GP
8N-6951 GOVERNOR GP
GOVERNOR GP
6I-1098 GOVERNOR GP
GOVERNOR GP
4W-8678 GOVERNOR GP
GOVERNOR GP
4W-3502 GOVERNOR GP
FILTER GP-FUEL
8H-7204 FILTER GP-FUEL
FILTER GP-FUEL
6N-6289 FILTER GP-FUEL
FILTER GP-FUEL
6N-6258 FILTER GP-FUEL
HOUSING GP-FUEL PUMP
7N-6124 HOUSING GP-FUEL PUMP
INJECTOR GP-FUEL
4W-7018 INJECTOR GP-FUEL
INJECTOR GP-FUEL
4W-7019 INJECTOR GP-FUEL
KIT-FUEL INJECTION LINES CLAMP
6I-4813 KIT-FUEL INJECTION LINES CLAMP
436-8387 KIT-FUEL SYSTEM GASKET
LINES GP-FLEXIBLE FUEL
3N-6668 LINES GP-FLEXIBLE FUEL
LINES GP-FUEL FILTER
6N-4609 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
6N-9316 LINES GP-FUEL FILTER

Truck sale:

Caterpillar 3412, mobile generator sets, Construction
95,720 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, mobile generator sets, Construction
96,795 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, mobile generator sets, Construction
93,569 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, Stationary Generator Sets, Construction
60,000 
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3412, Stationary Generator Sets, Construction
159,600 
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.