BASIC ENGINE
PARTS GP-MISCELLANEOUSBASIC ENGINE
PARTS GP-MISCELLANEOUS#SEBP31790590
4P-9351: KIT-ENGINE PARTS
4P-9351 KIT-ENGINE PARTS -MARINE CLASSIFICATION SOCIETY
FOR USE WITH ENGINES EQUIPPED WITH DOUBLE WALL FUEL LINES
AN ATTACHMENT
FOR USE WITH ENGINES EQUIPPED WITH DOUBLE WALL FUEL LINES
AN ATTACHMENT
For full view, you need register
Parts for your 3412 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 7W-2225 Y | [1] | CYLINDER HEAD AS | ||
| 7W-0561 Y | [1] | PUMP GP-FUEL INJECTION | ||
| 4W-7637 Y | [1] | TURBOCHARGER GP | ||
| 9L-5854 | [1] | BAND-FILLER (130.2-MM ID) | ||
| 328-5574 | [2] | BEARING-CONNECTING ROD (STANDARD) | ||
| 4W-5702 AB | BEARING-CONNECTING ROD (0.635-MM US) | |||
| 4W-5703 AB | BEARING-CONNECTING ROD (1.27-MM US) | |||
| 211-0592 | [1] | BEARING-MAIN (STANDARD) | ||
| 9Y-7212 | [1] | BODY AS-PISTON | ||
| 3P-1323 | [2] | BOLT-BEARING CAP (7/8-14X7.75-IN) | ||
| 4N-6658 | [1] | BUSHING (1.3-IN WIDE) | ||
| 7W-8301 | [3] | FASTENER GP-CYLINDER HEAD | ||
| (EACH INCLUDES) | ||||
| 5H-1504 | WASHER-HARD (20X33.5X5-MM THK) | |||
| 124-1855 | BOLT-12 POINT HEAD (3/4-16X7.638-IN) | |||
| 9L-6924 | [1] | GASKET | ||
| 9F-7450 | [1] | GASKET | ||
| 7C-0307 | [7] | GASKET | ||
| 4H-9541 | [1] | GASKET | ||
| 283-5666 | [1] | GASKET-CYLINDER HEAD | ||
| 129-9452 | [4] | GASKET-EXHAUST MANIFOLD | ||
| 1S-4810 | [1] | GASKET-OIL DRAIN | ||
| 4N-6340 | [1] | GASKET-OIL PAN | ||
| 1S-6595 | [1] | GASKET-OIL SUPPLY | ||
| 6N-9133 | [1] | GASKET-PLATE | ||
| 4N-1156 | [2] | GASKET-REGULATOR COVER | ||
| 4N-1918 | [1] | GASKET-WOUND | ||
| 101-3374 | [1] | GEAR (86-TEETH) | ||
| 271-5661 | [1] | GEAR AS-IDLER | ||
| 7N-7591 | [1] | GEAR-CRANKSHAFT (80-TEETH) | ||
| 173-7188 | [6] | GUIDE-VALVE | ||
| 4W-7019 | [9] | INJECTOR GP-FUEL | ||
| (EACH INCLUDES) | ||||
| 9L-9098 | [1] | SEAL-CARBON STOP | ||
| 7W-4482 | [1] | WASHER (17.14X9.76X3.18-MM THK) | ||
| 9X-2836 | [1] | SCREW-BUTTON HEAD | ||
| 114-3362 | [1] | SEAL-O-RING | ||
| 1W-5283 | [4] | INSERT-VALVE SEAT (EXHAUST)(STANDARD) | ||
| 7C-5353 AB | INSERT-VALVE SEAT (0.51-MM OS, EXHAUST) | |||
| 7C-5354 AB | INSERT-VALVE SEAT (0.76-MM OS, EXHAUST) | |||
| 4N-5893 | [2] | INSERT-VALVE SEAT (INLET)(STANDARD) | ||
| 7C-7602 AB | INSERT-VALVE SEAT (0.13-MM OS, INLET) | |||
| 7C-7603 AB | INSERT-VALVE SEAT (0.25-MM OS, INLET) | |||
| 7C-7604 AB | INSERT-VALVE SEAT (0.51-MM OS, INLET) | |||
| 7C-7605 AB | INSERT-VALVE SEAT (0.76-MM OS, INLET) | |||
| 1B-8705 | [1] | KEY-WOODRUFF | ||
| 140-7682 | [1] | KIT-GASKET (TURBOCHARGER MOUNTING) | ||
| 1W-6314 | [1] | LINE AS-FUEL (CYL NO. 4) | ||
| 1W-6315 | [1] | LINE AS-FUEL (CYL NO. 5) | ||
| 1W-6311 | [1] | LINE AS-FUEL INJECTION (CYL NO. 1) | ||
| 1W-6312 | [1] | LINE AS-FUEL INJECTION (CYL NO. 2) | ||
| 1W-6313 | [1] | LINE AS-FUEL INJECTION (CYL NO. 3) | ||
| 1W-6316 | [1] | LINE AS-FUEL INJECTION (CYL NO. 6) | ||
| 1W-6317 | [1] | LINE AS-FUEL INJECTION (CYL NO. 7) | ||
| 1W-6318 | [1] | LINE AS-FUEL INJECTION (CYL NO. 8) | ||
| 7C-5398 | [1] | LINE AS-FUEL INJECTION | ||
| 197-9322 | [1] | LINER-CYLINDER BLOCK | ||
| 2A-4429 | [12] | LOCK-RETAINER | ||
| 2N-2766 | [4] | LOCKNUT (3/8-16-THD) | ||
| 8N-1608 | [1] | PIN-PISTON | ||
| 253-1752 | [2] | PLATE-THRUST | ||
| 7W-2315 | [9] | RETAINER | ||
| 7E-5665 | [2] | RETAINER-PIN | ||
| 134-3761 | [2] | RING-PISTON (TOP) | ||
| 2P-2817 | [2] | RING-PISTON (INTERMEDIATE) | ||
| 7N-7078 | [2] | RING-PISTON (OIL CONTROL) | ||
| 160-8178 | [1] | ROD AS-CONNECTING | ||
| 6N-7175 | [6] | ROTOCOIL AS | ||
| (EACH INCLUDES) | ||||
| 6N-7174 | [1] | SHIELD-OIL | ||
| 5P-5678 D | SEAL (4-M) | |||
| 3E-6772 | [16] | SEAL (WATER) | ||
| 9L-9098 | [4] | SEAL-CARBON STOP | ||
| 110-2220 | [1] | SEAL-LINER | ||
| 142-7072 | [1] | SEAL-LINER | ||
| 3S-9643 | [1] | SEAL-LIP TYPE (WATER TEMPERATURE REGULATOR) | ||
| 142-6217 | [1] | SEAL-O-RING | ||
| 5P-8119 | [9] | SEAL-O-RING | ||
| (FUEL SYSTEM PARTS) | ||||
| 114-2687 | [2] | SEAL-O-RING | ||
| 109-0076 | [4] | SEAL-O-RING | ||
| 109-0073 | [1] | SEAL-O-RING | ||
| 109-0072 | [5] | SEAL-O-RING | ||
| 8M-8283 | [1] | SEAL-O-RING | ||
| 8C-5196 | [2] | SEAL-O-RING | ||
| 5P-8119 | [4] | SEAL-O-RING | ||
| (CYLINDER HEAD PARTS) | ||||
| 4F-7390 | [1] | SEAL-O-RING | ||
| 1H-1023 | [4] | SEAL-O-RING | ||
| 117-9712 | [1] | SHAFT-DRIVE IDLER | ||
| 4N-5906 | [6] | SPRING-VALVE | ||
| 6L-8562 | [4] | STUD-TAPERLOCK (3/8-16X1.77-IN) | ||
| 122-0321 | [4] | VALVE-EXHAUST | ||
| 122-0322 | [2] | VALVE-INLET | ||
| 9H-1031 | [2] | WASHER-HARD (24X41.5X6-MM THK) | ||
| 114-3364 | [4] | WASHER-SPECIAL (SEALING) | ||
| 7N-2443 | [1] | WASHER-THRUST (2.508X3.5X0.188-IN THK) | ||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31790591
4P-9353: KIT-ENGINE PARTS
4P-9353 KIT-ENGINE PARTS -MARINE CLASSIFICATION SOCIETY
FOR USE WITH ENGINES EQUIPPED WITH DOUBLE WALL FUEL LINES
AN ATTACHMENT
FOR USE WITH ENGINES EQUIPPED WITH DOUBLE WALL FUEL LINES
AN ATTACHMENT
For full view, you need register
Parts for your 3412 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 7W-2243 Y | [1] | CYLINDER HEAD AS | ||
| 4W-7019 Y | [13] | INJECTOR GP-FUEL | ||
| 7W-0561 Y | [1] | PUMP GP-FUEL INJECTION | ||
| 6N-2020 Y | [1] | TURBOCHARGER GP | ||
| 9L-5854 | [1] | BAND-FILLER (130.2-MM ID) | ||
| 4W-5702 AB | BEARING-CONNECTING ROD (0.635-MM US) | |||
| 4W-5703 AB | BEARING-CONNECTING ROD (1.27-MM US) | |||
| 217-0586 AB | BEARING-CONNECTING ROD (STANDARD) | |||
| 328-5574 | [2] | BEARING-CONNECTING ROD (STANDARD) | ||
| 211-0592 | [1] | BEARING-MAIN (STANDARD) | ||
| 4W-5698 AB | BEARING-MAIN (0.63-MM US) | |||
| 4W-5699 AB | BEARING-MAIN (1.27-MM US) | |||
| 4W-5700 AB | BEARING-MAIN (0.63-MM OS) | |||
| 4W-5701 AB | BEARING-MAIN (0.63-MM OS, 0.63-MM US) | |||
| 9Y-7212 | [1] | BODY AS-PISTON | ||
| 3P-1323 | [2] | BOLT-BEARING CAP (7/8-14X7.75-IN) | ||
| 4N-6658 | [1] | BUSHING (1.3-IN WIDE) | ||
| 7W-8301 | [3] | FASTENER GP-CYLINDER HEAD | ||
| (EACH INCLUDES) | ||||
| 5H-1504 | [1] | WASHER-HARD (20X33.5X5-MM THK) | ||
| 124-1855 | [1] | BOLT-12 POINT HEAD (3/4-16X7.638-IN) | ||
| 101-3374 | [1] | GEAR (86-TEETH) | ||
| 271-5656 | [1] | GEAR AS-IDLER (99/43-TEETH) | ||
| 151-2940 | [1] | GEAR-CRANKSHAFT (99-TEETH) | ||
| 173-7188 | [6] | GUIDE-VALVE | ||
| 1W-5283 | [4] | INSERT-VALVE SEAT (EXHAUST)(STANDARD) | ||
| 7C-5353 AB | INSERT-VALVE SEAT (0.51-MM OS, EXHAUST) | |||
| 7C-5354 AB | INSERT-VALVE SEAT (0.76-MM OS, EXHAUST) | |||
| 4N-5893 | [2] | INSERT-VALVE SEAT (INLET)(STANDARD) | ||
| 7C-7602 AB | INSERT-VALVE SEAT (0.13-MM OS, INLET) | |||
| 7C-7603 AB | INSERT-VALVE SEAT (0.25-MM OS, INLET) | |||
| 7C-7604 AB | INSERT-VALVE SEAT (0.51-MM OS, INLET) | |||
| 7C-7605 AB | INSERT-VALVE SEAT (0.76-MM OS, INLET) | |||
| 1B-8705 | [1] | KEY-WOODRUFF | ||
| 292-2960 | [1] | KIT-GASKET (SINGLE CYLINDER HEAD) | ||
| 6V-0233 | [1] | KIT-GASKET (TURBOCHARGER MOUNTING) | ||
| 9Y-6188 AB | KIT-ROD BEARING (STANDARD) | |||
| 9Y-6189 AB | KIT-ROD BEARING (0.635-MM US) | |||
| 9Y-6190 AB | KIT-ROD BEARING (1.27-MM US) | |||
| 1W-6451 | [1] | LINE AS-FUEL INJECTION (CYL NO. 1)(NO.1) | ||
| 1W-6452 | [1] | LINE AS-FUEL INJECTION (CYL NO. 2)(NO.2) | ||
| 1W-6453 | [1] | LINE AS-FUEL INJECTION (CYL NO. 3)(NO.3) | ||
| 1W-6454 | [1] | LINE AS-FUEL INJECTION (CYL NO. 4)(NO.4) | ||
| 1W-6455 | [1] | LINE AS-FUEL INJECTION (CYL NO. 5)(NO.5) | ||
| 1W-6456 | [1] | LINE AS-FUEL INJECTION (CYL NO. 6) | ||
| 1W-6457 | [1] | LINE AS-FUEL INJECTION (CYL NO. 7)(NO.7) | ||
| 1W-6458 | [1] | LINE AS-FUEL INJECTION (CYL NO. 8)(NO.8) | ||
| 1W-6459 | [1] | LINE AS-FUEL INJECTION (CYL NO. 9)(NO.9) | ||
| 1W-6460 | [1] | LINE AS-FUEL INJECTION (CYL NO. 10)(NO.10) | ||
| 1W-6461 | [1] | LINE AS-FUEL INJECTION (CYL NO. 11)(NO. 11) | ||
| 1W-6462 | [1] | LINE AS-FUEL INJECTION (CYL NO. 12)(NO. 12) | ||
| 4P-7812 | [1] | LINE AS-FUEL INJECTION (NO. 12) | ||
| 9Y-3969 | [1] | LINE AS-FUEL INJECTION | ||
| 197-9322 | [1] | LINER-CYLINDER BLOCK | ||
| 2A-4429 | [12] | LOCK-RETAINER | ||
| 2N-2766 | [4] | LOCKNUT (3/8-16-THD) | ||
| 8N-1608 | [1] | PIN-PISTON | ||
| 253-1752 | [2] | PLATE-THRUST | ||
| 7W-2315 | [13] | RETAINER | ||
| 7E-5665 | [2] | RETAINER-PIN | ||
| 134-3761 | [2] | RING-PISTON (TOP) | ||
| 2P-2817 | [2] | RING-PISTON (INTERMEDIATE) | ||
| 7N-7078 | [2] | RING-PISTON (OIL CONTROL) | ||
| 160-8178 | [1] | ROD AS-CONNECTING | ||
| 6N-7175 | [6] | ROTOCOIL AS | ||
| (EACH INCLUDES) | ||||
| 6N-7154 | [1] | ROTOCOIL AS | ||
| 6N-7174 | [1] | SHIELD-OIL | ||
| 110-2220 | [1] | SEAL-LINER | ||
| 142-7072 | [1] | SEAL-LINER | ||
| 142-6217 | [1] | SEAL-O-RING | ||
| 5P-8119 | [13] | SEAL-O-RING | ||
| 117-9712 | [1] | SHAFT-DRIVE IDLER | ||
| 4N-5906 | [6] | SPRING-VALVE | ||
| 6L-8562 | [4] | STUD-TAPERLOCK (3/8-16X1.77-IN) | ||
| 115-2367 | [4] | VALVE-EXHAUST | ||
| 115-2368 | [2] | VALVE-INLET | ||
| 9H-1031 | [2] | WASHER-HARD (24X41.5X6-MM THK) | ||
| 7N-2443 | [1] | WASHER-THRUST (2.508X3.5X0.188-IN THK) | ||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31790592
4P-9354: KIT-ENGINE PARTS
4P-9354 KIT-ENGINE PARTS
MARINE SOCIETY
FOR USE WITH ENGINES EQUIPPED WITH DOUBLE WALL FUEL LINES
AN ATTACHMENT
MARINE SOCIETY
FOR USE WITH ENGINES EQUIPPED WITH DOUBLE WALL FUEL LINES
AN ATTACHMENT
For full view, you need register
Parts for your 3412 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 7W-2243 Y | [1] | CYLINDER HEAD AS | ||
| 4W-7018 Y | [13] | INJECTOR GP-FUEL | ||
| 7W-0561 Y | [1] | PUMP GP-FUEL INJECTION | ||
| 4W-1232 Y | [1] | TURBOCHARGER GP | ||
| 9L-5854 | [1] | BAND-FILLER (130.2-MM ID) | ||
| 328-5574 | [2] | BEARING-CONNECTING ROD (STANDARD) | ||
| 211-0592 | [1] | BEARING-MAIN (STANDARD) | ||
| 4W-5698 AB | BEARING-MAIN (0.63-MM US) | |||
| 4W-5699 AB | BEARING-MAIN (1.27-MM US) | |||
| 4W-5700 AB | BEARING-MAIN (0.63-MM OS) | |||
| 4W-5701 AB | BEARING-MAIN (0.63-MM OS, 0.63-MM US) | |||
| 9Y-7212 | [1] | BODY AS-PISTON | ||
| 3P-1323 | [2] | BOLT-BEARING CAP (7/8-14X7.75-IN) | ||
| 4N-6658 | [1] | BUSHING (1.3-IN WIDE) | ||
| 7W-8301 | [3] | FASTENER GP-CYLINDER HEAD | ||
| (EACH INCLUDES) | ||||
| 5H-1504 | [1] | WASHER-HARD (20X33.5X5-MM THK) | ||
| 124-1855 | [1] | BOLT-12 POINT HEAD (3/4-16X7.638-IN) | ||
| 101-3374 | [1] | GEAR (86-TEETH) | ||
| 271-5656 | [1] | GEAR AS-IDLER (99/43-TEETH) | ||
| 151-2940 | [1] | GEAR-CRANKSHAFT (99-TEETH) | ||
| 173-7188 | [6] | GUIDE-VALVE | ||
| 1W-5283 | [4] | INSERT-VALVE SEAT (EXHAUST)(STANDARD) | ||
| 7C-5353 AB | INSERT-VALVE SEAT (0.51-MM OS, EXHAUST) | |||
| 7C-5354 AB | INSERT-VALVE SEAT (0.76-MM OS, EXHAUST) | |||
| 4N-5893 | [2] | INSERT-VALVE SEAT (INLET)(STANDARD) | ||
| 7C-7602 AB | INSERT-VALVE SEAT (0.13-MM OS, INLET) | |||
| 7C-7603 AB | INSERT-VALVE SEAT (0.25-MM OS, INLET) | |||
| 7C-7604 AB | INSERT-VALVE SEAT (0.51-MM OS, INLET) | |||
| 7C-7605 AB | INSERT-VALVE SEAT (0.76-MM OS, INLET) | |||
| 1B-8705 | [1] | KEY-WOODRUFF | ||
| 292-2960 | [1] | KIT-GASKET (SINGLE CYLINDER HEAD) | ||
| 6V-0233 | [1] | KIT-GASKET (TURBOCHARGER MOUNTING) | ||
| 9Y-6188 AB | KIT-ROD BEARING (STANDARD) | |||
| 9Y-6189 AB | KIT-ROD BEARING (0.635-MM US) | |||
| 9Y-6190 AB | KIT-ROD BEARING (1.27-MM US) | |||
| 1W-6451 | [1] | LINE AS-FUEL INJECTION (CYL NO. 1)(NO. 1) | ||
| 1W-6452 | [1] | LINE AS-FUEL INJECTION (CYL NO. 2)(NO. 2) | ||
| 1W-6453 | [1] | LINE AS-FUEL INJECTION (CYL NO. 3)(NO. 3) | ||
| 1W-6454 | [1] | LINE AS-FUEL INJECTION (CYL NO. 4)(NO. 4) | ||
| 1W-6455 | [1] | LINE AS-FUEL INJECTION (CYL NO. 5)(NO. 5) | ||
| 1W-6456 | [1] | LINE AS-FUEL INJECTION (CYL NO. 6) | ||
| 1W-6457 | [1] | LINE AS-FUEL INJECTION (CYL NO. 7)(NO. 7) | ||
| 1W-6458 | [1] | LINE AS-FUEL INJECTION (CYL NO. 8)(NO. 8) | ||
| 1W-6459 | [1] | LINE AS-FUEL INJECTION (CYL NO. 9)(NO.9) | ||
| 1W-6460 | [1] | LINE AS-FUEL INJECTION (CYL NO. 10)(NO.10) | ||
| 1W-6461 | [1] | LINE AS-FUEL INJECTION (CYL NO. 11)(NO. 11) | ||
| 1W-6462 | [1] | LINE AS-FUEL INJECTION (CYL NO. 12)(NO. 12) | ||
| 9Y-3969 | [1] | LINE AS-FUEL INJECTION | ||
| 197-9322 | [1] | LINER-CYLINDER BLOCK | ||
| 2A-4429 | [12] | LOCK-RETAINER | ||
| 2N-2766 | [4] | LOCKNUT (3/8-16-THD) | ||
| 8N-1608 | [1] | PIN-PISTON | ||
| 253-1752 | [2] | PLATE-THRUST | ||
| 7W-2315 | [13] | RETAINER | ||
| 7E-5665 | [2] | RETAINER-PIN | ||
| 134-3761 | [2] | RING-PISTON (TOP) | ||
| 2P-2817 | [2] | RING-PISTON (INTERMEDIATE) | ||
| 7N-7078 | [2] | RING-PISTON (OIL CONTROL) | ||
| 160-8178 | [1] | ROD AS-CONNECTING | ||
| 6N-7175 | [6] | ROTOCOIL AS | ||
| (EACH INCLUDES) | ||||
| 6N-7154 | [1] | ROTOCOIL AS | ||
| 6N-7174 | [1] | SHIELD-OIL | ||
| 110-2220 | [1] | SEAL-LINER | ||
| 142-7072 | [1] | SEAL-LINER | ||
| 142-6217 | [1] | SEAL-O-RING | ||
| 5P-8119 | [13] | SEAL-O-RING | ||
| 117-9712 | [1] | SHAFT-DRIVE IDLER | ||
| 4N-5906 | [6] | SPRING-VALVE | ||
| 6L-8562 | [4] | STUD-TAPERLOCK (3/8-16X1.77-IN) | ||
| 115-2367 | [4] | VALVE-EXHAUST | ||
| 115-2368 | [2] | VALVE-INLET | ||
| 9H-1031 | [2] | WASHER-HARD (24X41.5X6-MM THK) | ||
| 7N-2443 | [1] | WASHER-THRUST (2.508X3.5X0.188-IN THK) | ||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31790593
4P-9355: KIT-ENGINE PARTS
4P-9355 KIT-ENGINE PARTS
MARINE SOCIETY
FOR USE WITH ENGINES EQUIPPED WITH DOUBLE WALL FUEL LINES
AN ATTACHMENT
MARINE SOCIETY
FOR USE WITH ENGINES EQUIPPED WITH DOUBLE WALL FUEL LINES
AN ATTACHMENT
For full view, you need register
Parts for your 3412 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 7W-2243 Y | [1] | CYLINDER HEAD AS | ||
| 4W-7018 Y | [13] | INJECTOR GP-FUEL | ||
| 7W-0561 Y | [1] | PUMP GP-FUEL INJECTION | ||
| 4W-1148 Y | [1] | TURBOCHARGER GP | ||
| 9L-5854 | [1] | BAND-FILLER (130.2-MM ID) | ||
| 328-5574 | [2] | BEARING-CONNECTING ROD (STANDARD) | ||
| 211-0592 | [1] | BEARING-MAIN (STANDARD) | ||
| 4W-5698 AB | BEARING-MAIN (0.63-MM US) | |||
| 4W-5699 AB | BEARING-MAIN (1.27-MM US) | |||
| 4W-5700 AB | BEARING-MAIN (0.63-MM OS) | |||
| 4W-5701 AB | BEARING-MAIN (0.63-MM OS, 0.63-MM US) | |||
| 9Y-7212 | [1] | BODY AS-PISTON | ||
| 3P-1323 | [2] | BOLT-BEARING CAP (7/8-14X7.75-IN) | ||
| 4N-6658 | [1] | BUSHING (1.3-IN WIDE) | ||
| 7W-8301 | [3] | FASTENER GP-CYLINDER HEAD | ||
| (EACH INCLUDES) | ||||
| 5H-1504 | [1] | WASHER-HARD (20X33.5X5-MM THK) | ||
| 124-1855 | [1] | BOLT-12 POINT HEAD (3/4-16X7.638-IN) | ||
| 101-3374 | [1] | GEAR (86-TEETH) | ||
| 271-5656 | [1] | GEAR AS-IDLER (99/43-TEETH) | ||
| 151-2940 | [1] | GEAR-CRANKSHAFT (99-TEETH) | ||
| 173-7188 | [6] | GUIDE-VALVE | ||
| 1W-5283 | [4] | INSERT-VALVE SEAT (EXHAUST)(STANDARD) | ||
| 7C-5353 AB | INSERT-VALVE SEAT (0.51-MM OS, EXHAUST) | |||
| 7C-5354 AB | INSERT-VALVE SEAT (0.76-MM OS, EXHAUST) | |||
| 4N-5893 | [2] | INSERT-VALVE SEAT (INLET)(STANDARD) | ||
| 7C-7602 | INSERT-VALVE SEAT (0.13-MM OS, INLET) | |||
| 7C-7603 | INSERT-VALVE SEAT (0.25-MM OS, INLET) | |||
| 7C-7604 | INSERT-VALVE SEAT (0.51-MM OS, INLET) | |||
| 7C-7605 | INSERT-VALVE SEAT (0.76-MM OS, INLET) | |||
| 1B-8705 | [1] | KEY-WOODRUFF | ||
| 292-2960 | [1] | KIT-GASKET (SINGLE CYLINDER HEAD) | ||
| 6V-0233 | [1] | KIT-GASKET (TURBOCHARGER MOUNTING) | ||
| 1W-6451 | [1] | LINE AS-FUEL INJECTION (CYL NO. 1)(NO. 1) | ||
| 1W-6452 | [1] | LINE AS-FUEL INJECTION (CYL NO. 2)(NO. 2) | ||
| 1W-6453 | [1] | LINE AS-FUEL INJECTION (CYL NO. 3)(NO. 3) | ||
| 1W-6454 | [1] | LINE AS-FUEL INJECTION (CYL NO. 4)(NO. 4) | ||
| 1W-6455 | [1] | LINE AS-FUEL INJECTION (CYL NO. 5)(NO. 5) | ||
| 1W-6456 | [1] | LINE AS-FUEL INJECTION (CYL NO. 6) | ||
| 1W-6457 | [1] | LINE AS-FUEL INJECTION (CYL NO. 7)(NO. 7) | ||
| 1W-6458 | [1] | LINE AS-FUEL INJECTION (CYL NO. 8)(NO. 8) | ||
| 1W-6459 | [1] | LINE AS-FUEL INJECTION (CYL NO. 9)(NO. 9) | ||
| 1W-6460 | [1] | LINE AS-FUEL INJECTION (CYL NO. 10)(NO. 10) | ||
| 1W-6461 | [1] | LINE AS-FUEL INJECTION (CYL NO. 11)(NO. 11) | ||
| 1W-6462 | [1] | LINE AS-FUEL INJECTION (CYL NO. 12)(NO. 12) | ||
| 9Y-3969 | [1] | LINE AS-FUEL INJECTION | ||
| 197-9322 | [1] | LINER-CYLINDER BLOCK | ||
| 2A-4429 | [12] | LOCK-RETAINER | ||
| 8M-2296 | [4] | NUT-FULL (3/8-16-THD) | ||
| 8N-1608 | [1] | PIN-PISTON | ||
| 253-1752 | [2] | PLATE-THRUST | ||
| 7W-2315 | [13] | RETAINER | ||
| 7E-5665 | [2] | RETAINER-PIN | ||
| 134-3761 | [2] | RING-PISTON (TOP) | ||
| 2P-2817 | [2] | RING-PISTON (INTERMEDIATE) | ||
| 7N-7078 | [2] | RING-PISTON (OIL CONTROL) | ||
| 160-8178 | [1] | ROD AS-CONNECTING | ||
| 6N-7175 | [6] | ROTOCOIL AS | ||
| (EACH INCLUDES) | ||||
| 6N-7154 | [1] | ROTOCOIL AS | ||
| 6N-7174 | [1] | SHIELD-OIL | ||
| 110-2220 | [1] | SEAL-LINER | ||
| 142-7072 | [1] | SEAL-LINER | ||
| 142-6217 | [1] | SEAL-O-RING | ||
| 5P-8119 | [13] | SEAL-O-RING | ||
| 117-9712 | [1] | SHAFT-DRIVE IDLER | ||
| 4N-5906 | [6] | SPRING-VALVE | ||
| 6L-8562 | [4] | STUD-TAPERLOCK (3/8-16X1.77-IN) | ||
| 115-2367 | [4] | VALVE-EXHAUST | ||
| 115-2368 | [2] | VALVE-INLET | ||
| 9H-1031 | [2] | WASHER-HARD (24X41.5X6-MM THK) | ||
| 7N-2443 | [1] | WASHER-THRUST (2.508X3.5X0.188-IN THK) | ||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31790594
4P-9356: KIT-ENGINE PARTS
4P-9356 KIT-ENGINE PARTS
MARINE SOCIETY
FOR USE WITH ENGINES EQUIPPED WITH DOUBLE WALL FUEL LINES
AN ATTACHMENT
MARINE SOCIETY
FOR USE WITH ENGINES EQUIPPED WITH DOUBLE WALL FUEL LINES
AN ATTACHMENT
For full view, you need register
Parts for your 3412 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 7W-2243 Y | [1] | CYLINDER HEAD AS | ||
| 4W-7019 Y | [13] | INJECTOR GP-FUEL | ||
| 7W-0561 Y | [1] | PUMP GP-FUEL INJECTION | ||
| 7C-6703 Y | [1] | TURBOCHARGER GP | ||
| 9L-5854 | [1] | BAND-FILLER (130.2-MM ID) | ||
| 328-5574 | [2] | BEARING-CONNECTING ROD (STANDARD) | ||
| 211-0592 | [1] | BEARING-MAIN (STANDARD) | ||
| 4W-5698 AB | BEARING-MAIN (0.63-MM US) | |||
| 4W-5699 AB | BEARING-MAIN (1.27-MM US) | |||
| 4W-5700 AB | BEARING-MAIN (0.63-MM OS) | |||
| 4W-5701 AB | BEARING-MAIN (0.63-MM OS, 0.63-MM US) | |||
| 9Y-7212 | [1] | BODY AS-PISTON | ||
| 3P-1323 | [2] | BOLT-BEARING CAP (7/8-14X7.75-IN) | ||
| 4N-6658 | [1] | BUSHING (1.3-IN WIDE) | ||
| 7W-8301 | [3] | FASTENER GP-CYLINDER HEAD | ||
| (EACH INCLUDES) | ||||
| 5H-1504 | [1] | WASHER-HARD (20X33.5X5-MM THK) | ||
| 124-1855 | [1] | BOLT-12 POINT HEAD (3/4-16X7.638-IN) | ||
| 101-3374 | [1] | GEAR (86-TEETH) | ||
| 271-5656 | [1] | GEAR AS-IDLER (99/43-TEETH) | ||
| 151-2940 | [1] | GEAR-CRANKSHAFT (99-TEETH) | ||
| 173-7188 | [6] | GUIDE-VALVE | ||
| 1W-5283 | [4] | INSERT-VALVE SEAT (EXHAUST)(STANDARD) | ||
| 7C-5353 AB | INSERT-VALVE SEAT (0.51-MM OS, EXHAUST) | |||
| 7C-5354 AB | INSERT-VALVE SEAT (0.76-MM OS, EXHAUST) | |||
| 4N-5893 | [2] | INSERT-VALVE SEAT (INLET)(STANDARD) | ||
| 7C-7602 AB | INSERT-VALVE SEAT (0.13-MM OS, INLET) | |||
| 7C-7603 AB | INSERT-VALVE SEAT (0.25-MM OS, INLET) | |||
| 7C-7604 AB | INSERT-VALVE SEAT (0.51-MM OS, INLET) | |||
| 7C-7605 AB | INSERT-VALVE SEAT (0.76-MM OS, INLET) | |||
| 1B-8705 | [1] | KEY-WOODRUFF | ||
| 292-2960 | [1] | KIT-GASKET (SINGLE CYLINDER HEAD) | ||
| 6V-0233 | [1] | KIT-GASKET (TURBOCHARGER MOUNTING) | ||
| 9Y-6188 AB | KIT-ROD BEARING (STANDARD) | |||
| 9Y-6189 AB | KIT-ROD BEARING (0.635-MM US) | |||
| 9Y-6190 AB | KIT-ROD BEARING (1.27-MM US) | |||
| 1W-6451 | [1] | LINE AS-FUEL INJECTION (CYL NO. 1)(NO. 1) | ||
| 1W-6452 | [1] | LINE AS-FUEL INJECTION (CYL NO. 2)(NO. 2) | ||
| 1W-6453 | [1] | LINE AS-FUEL INJECTION (CYL NO. 3)(NO. 3) | ||
| 1W-6454 | [1] | LINE AS-FUEL INJECTION (CYL NO. 4)(NO. 4) | ||
| 1W-6455 | [1] | LINE AS-FUEL INJECTION (CYL NO. 5)(NO. 5) | ||
| 1W-6456 | [1] | LINE AS-FUEL INJECTION (CYL NO. 6) | ||
| 1W-6457 | [1] | LINE AS-FUEL INJECTION (CYL NO. 7)(NO. 7) | ||
| 1W-6458 | [1] | LINE AS-FUEL INJECTION (CYL NO. 8)(NO. 8) | ||
| 1W-6459 | [1] | LINE AS-FUEL INJECTION (CYL NO. 9)(NO. 9) | ||
| 1W-6460 | [1] | LINE AS-FUEL INJECTION (CYL NO. 10)(NO. 10) | ||
| 1W-6461 | [1] | LINE AS-FUEL INJECTION (CYL NO. 11)(NO. 11) | ||
| 1W-6462 | [1] | LINE AS-FUEL INJECTION (CYL NO. 12)(NO. 12) | ||
| 7C-6304 AB | LINE AS-FUEL INJECTION | |||
| 7C-6305 AB | LINE AS-FUEL INJECTION | |||
| 9Y-3969 | [1] | LINE AS-FUEL INJECTION | ||
| 197-9322 | [1] | LINER-CYLINDER BLOCK | ||
| 2A-4429 | [12] | LOCK-RETAINER | ||
| 8M-2296 | [4] | NUT-FULL (3/8-16-THD) | ||
| 8N-1608 | [1] | PIN-PISTON | ||
| 253-1752 | [2] | PLATE-THRUST | ||
| 7W-2315 | [13] | RETAINER | ||
| 7E-5665 | [2] | RETAINER-PIN | ||
| 134-3761 | [2] | RING-PISTON (TOP) | ||
| 2P-2817 | [2] | RING-PISTON (INTERMEDIATE) | ||
| 7N-7078 | [2] | RING-PISTON (OIL CONTROL) | ||
| 160-8178 | [1] | ROD AS-CONNECTING | ||
| 6N-7175 | [6] | ROTOCOIL AS | ||
| (EACH INCLUDES) | ||||
| 6N-7154 | [1] | ROTOCOIL AS | ||
| 6N-7174 | [1] | SHIELD-OIL | ||
| 110-2220 | [1] | SEAL-LINER | ||
| 142-7072 | [1] | SEAL-LINER | ||
| 142-6217 | [1] | SEAL-O-RING | ||
| 5P-8119 | [13] | SEAL-O-RING | ||
| 117-9712 | [1] | SHAFT-DRIVE IDLER | ||
| 4N-5906 | [6] | SPRING-VALVE | ||
| 6L-8562 | [4] | STUD-TAPERLOCK (3/8-16X1.77-IN) | ||
| 115-2367 | [4] | VALVE-EXHAUST | ||
| 115-2368 | [2] | VALVE-INLET | ||
| 9H-1031 | [2] | WASHER-HARD (24X41.5X6-MM THK) | ||
| 7N-2443 | [1] | WASHER-THRUST (2.508X3.5X0.188-IN THK) | ||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31790595
5N-1715: KIT-ENGINE PARTS
For full view, you need register
Parts for your 3412 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 7W-2243 Y | [1] | CYLINDER HEAD AS | ||
| 4W-7019 Y | [13] | INJECTOR GP-FUEL | ||
| 7W-0561 Y | [1] | PUMP GP-FUEL INJECTION | ||
| 6N-2020 Y | [1] | TURBOCHARGER GP | ||
| 9L-5854 | [1] | BAND-FILLER (130.2-MM ID) | ||
| 328-5574 | [2] | BEARING-CONNECTING ROD (STANDARD) | ||
| 4W-5702 AB | BEARING-CONNECTING ROD (0.635-MM US) | |||
| 4W-5703 AB | BEARING-CONNECTING ROD (1.27-MM US) | |||
| 211-0592 | [1] | BEARING-MAIN (STANDARD) | ||
| 4W-5698 AB | BEARING-MAIN (0.63-MM US) | |||
| 4W-5699 AB | BEARING-MAIN (1.27-MM US) | |||
| 4W-5700 AB | BEARING-MAIN (0.63-MM OS) | |||
| 4W-5701 AB | BEARING-MAIN (0.63-MM OS, 0.63-MM US) | |||
| 9Y-7212 | [1] | BODY AS-PISTON | ||
| 3P-1323 | [2] | BOLT-BEARING CAP (7/8-14X7.75-IN) | ||
| 4N-6658 | [1] | BUSHING (1.3-IN WIDE) | ||
| 7W-8301 | [3] | FASTENER GP-CYLINDER HEAD | ||
| (EACH INCLUDES) | ||||
| 5H-1504 | WASHER-HARD (20X33.5X5-MM THK) | |||
| 124-1855 | BOLT-12 POINT HEAD (3/4-16X7.638-IN) | |||
| 101-3374 | [1] | GEAR (86-TEETH) | ||
| 271-5656 | [1] | GEAR AS-IDLER (99/43-TEETH) | ||
| 151-2940 | [1] | GEAR-CRANKSHAFT (99-TEETH) | ||
| 173-7188 | [6] | GUIDE-VALVE | ||
| 1W-5283 | [4] | INSERT-VALVE SEAT (EXHAUST)(STANDARD) | ||
| 7C-5353 AB | INSERT-VALVE SEAT (0.51-MM OS, EXHAUST) | |||
| 7C-5354 AB | INSERT-VALVE SEAT (0.76-MM OS, EXHAUST) | |||
| 4N-5893 | [2] | INSERT-VALVE SEAT (INLET)(STANDARD) | ||
| 7C-7602 AB | INSERT-VALVE SEAT (0.13-MM OS, INLET) | |||
| 7C-7603 AB | INSERT-VALVE SEAT (0.25-MM OS, INLET) | |||
| 7C-7604 AB | INSERT-VALVE SEAT (0.51-MM OS, INLET) | |||
| 7C-7605 AB | INSERT-VALVE SEAT (0.76-MM OS, INLET) | |||
| 1B-8705 | [1] | KEY-WOODRUFF | ||
| 292-2960 | [1] | KIT-GASKET (SINGLE CYLINDER HEAD) | ||
| 6V-0233 | [1] | KIT-GASKET (TURBOCHARGER MOUNTING) | ||
| 9Y-6188 AB | KIT-ROD BEARING (STANDARD) | |||
| 9Y-6189 AB | KIT-ROD BEARING (0.635-MM US) | |||
| 9Y-6190 AB | KIT-ROD BEARING (1.27-MM US) | |||
| 4P-7801 | [1] | LINE AS-FUEL INJECTION (NO. 1) | ||
| 4P-7802 | [1] | LINE AS-FUEL INJECTION (NO. 2) | ||
| 4P-7803 | [1] | LINE AS-FUEL INJECTION (NO. 3) | ||
| 4P-7804 | [1] | LINE AS-FUEL INJECTION (NO. 4) | ||
| 4P-7805 | [1] | LINE AS-FUEL INJECTION (NO. 5) | ||
| 4P-7806 | [1] | LINE AS-FUEL INJECTION (NO. 6) | ||
| 4P-7807 | [1] | LINE AS-FUEL INJECTION (NO. 7) | ||
| 4P-7808 | [1] | LINE AS-FUEL INJECTION (NO. 8) | ||
| 4P-7809 | [1] | LINE AS-FUEL INJECTION (NO. 9) | ||
| 4P-7810 | [1] | LINE AS-FUEL INJECTION (NO. 10) | ||
| 4P-7811 | [1] | LINE AS-FUEL INJECTION (NO. 11) | ||
| 4P-7812 | [1] | LINE AS-FUEL INJECTION (NO. 12) | ||
| 9Y-3969 | [1] | LINE AS-FUEL INJECTION | ||
| 197-9322 | [1] | LINER-CYLINDER BLOCK | ||
| 2A-4429 | [12] | LOCK-RETAINER | ||
| 2N-2766 | [4] | LOCKNUT (3/8-16-THD) | ||
| 8N-1608 | [1] | PIN-PISTON | ||
| 253-1752 | [2] | PLATE-THRUST | ||
| 7W-2315 | [13] | RETAINER | ||
| 7E-5665 | [2] | RETAINER-PIN | ||
| 134-3761 | [2] | RING-PISTON (TOP) | ||
| 2P-2817 | [2] | RING-PISTON (INTERMEDIATE) | ||
| 7N-7078 | [2] | RING-PISTON (OIL CONTROL) | ||
| 160-8178 | [1] | ROD AS-CONNECTING | ||
| 6N-7175 | [6] | ROTOCOIL AS | ||
| 110-2220 | [1] | SEAL-LINER | ||
| 142-7072 | [1] | SEAL-LINER | ||
| 142-6217 | [1] | SEAL-O-RING | ||
| 5P-8119 | [13] | SEAL-O-RING | ||
| 117-9712 | [1] | SHAFT-DRIVE IDLER | ||
| 4N-5906 | [6] | SPRING-VALVE | ||
| 6L-8562 | [4] | STUD-TAPERLOCK (3/8-16X1.77-IN) | ||
| 115-2367 | [4] | VALVE-EXHAUST | ||
| 115-2368 | [2] | VALVE-INLET | ||
| 9H-1031 | [2] | WASHER-HARD (24X41.5X6-MM THK) | ||
| 7N-2443 | [1] | WASHER-THRUST (2.508X3.5X0.188-IN THK) | ||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31790596
5N-8530: KIT-ENGINE PARTS
5N-8530 KIT-ENGINE PARTS
MARINE SOCIETY
FOR USE WITH PROPULSION ENGINE AT 1200 RPM
AN ATTACHMENT
MARINE SOCIETY
FOR USE WITH PROPULSION ENGINE AT 1200 RPM
AN ATTACHMENT
For full view, you need register
Parts for your 3412 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 7W-2243 Y | [1] | CYLINDER HEAD AS | ||
| 4W-7019 Y | [13] | INJECTOR GP-FUEL | ||
| 7W-0561 Y | [1] | PUMP GP-FUEL INJECTION | ||
| 7C-6703 Y | [1] | TURBOCHARGER GP | ||
| 9L-5854 | [1] | BAND-FILLER (130.2-MM ID) | ||
| 328-5574 | [2] | BEARING-CONNECTING ROD (STANDARD) | ||
| 4W-5702 AB | BEARING-CONNECTING ROD (0.635-MM US) | |||
| 4W-5703 AB | BEARING-CONNECTING ROD (1.27-MM US) | |||
| 211-0592 | [1] | BEARING-MAIN (STANDARD) | ||
| 4W-5698 AB | BEARING-MAIN (0.63-MM US) | |||
| 4W-5699 AB | BEARING-MAIN (1.27-MM US) | |||
| 4W-5700 AB | BEARING-MAIN (0.63-MM OS) | |||
| 4W-5701 AB | BEARING-MAIN (0.63-MM OS, 0.63-MM US) | |||
| 9Y-7212 | [1] | BODY AS-PISTON | ||
| 3P-1323 | [2] | BOLT-BEARING CAP (7/8-14X7.75-IN) | ||
| AB | BRACE AS-RADIATOR | |||
| 4N-6658 | [1] | BUSHING (1.3-IN WIDE) | ||
| 7W-8301 | [3] | FASTENER GP-CYLINDER HEAD | ||
| (EACH INCLUDES) | ||||
| 5H-1504 | [1] | WASHER-HARD (20X33.5X5-MM THK) | ||
| 124-1855 | [1] | BOLT-12 POINT HEAD (3/4-16X7.638-IN) | ||
| 101-3374 | [1] | GEAR (86-TEETH) | ||
| 271-5656 | [1] | GEAR AS-IDLER (99/43-TEETH) | ||
| 151-2940 | [1] | GEAR-CRANKSHAFT (99-TEETH) | ||
| 173-7188 | [6] | GUIDE-VALVE | ||
| 1W-5283 | [4] | INSERT-VALVE SEAT (EXHAUST)(STANDARD) | ||
| 7C-5353 AB | INSERT-VALVE SEAT (0.51-MM OS, EXHAUST) | |||
| 7C-5354 AB | INSERT-VALVE SEAT (0.76-MM OS, EXHAUST) | |||
| 4N-5893 | [2] | INSERT-VALVE SEAT (INLET)(STANDARD) | ||
| 7C-7602 AB | INSERT-VALVE SEAT (0.13-MM OS, INLET) | |||
| 7C-7603 AB | INSERT-VALVE SEAT (0.25-MM OS, INLET) | |||
| 7C-7604 AB | INSERT-VALVE SEAT (0.51-MM OS, INLET) | |||
| 7C-7605 AB | INSERT-VALVE SEAT (0.76-MM OS, INLET) | |||
| 1B-8705 | [1] | KEY-WOODRUFF | ||
| 292-2960 | [1] | KIT-GASKET (SINGLE CYLINDER HEAD) | ||
| 6V-0233 | [1] | KIT-GASKET (TURBOCHARGER MOUNTING) | ||
| 9Y-6188 AB | KIT-ROD BEARING (STANDARD) | |||
| 9Y-6189 AB | KIT-ROD BEARING (0.635-MM US) | |||
| 9Y-6190 AB | KIT-ROD BEARING (1.27-MM US) | |||
| 4P-7801 | [1] | LINE AS-FUEL INJECTION (NO. 1) | ||
| 4P-7802 | [1] | LINE AS-FUEL INJECTION (NO. 2) | ||
| 4P-7803 | [1] | LINE AS-FUEL INJECTION (NO. 3) | ||
| 4P-7804 | [1] | LINE AS-FUEL INJECTION (NO. 4) | ||
| 4P-7805 | [1] | LINE AS-FUEL INJECTION (NO. 5) | ||
| 4P-7806 | [1] | LINE AS-FUEL INJECTION (NO. 6) | ||
| 4P-7807 | [1] | LINE AS-FUEL INJECTION (NO. 7) | ||
| 4P-7808 | [1] | LINE AS-FUEL INJECTION (NO. 8) | ||
| 4P-7809 | [1] | LINE AS-FUEL INJECTION (NO. 9) | ||
| 4P-7810 | [1] | LINE AS-FUEL INJECTION (NO. 10) | ||
| 4P-7811 | [1] | LINE AS-FUEL INJECTION (NO. 11) | ||
| 4P-7812 | [1] | LINE AS-FUEL INJECTION (NO. 12) | ||
| 9Y-3969 | [1] | LINE AS-FUEL INJECTION | ||
| 197-9322 | [1] | LINER-CYLINDER BLOCK | ||
| 2A-4429 | [12] | LOCK-RETAINER | ||
| 8M-2296 | [4] | NUT-FULL (3/8-16-THD) | ||
| 8N-1608 | [1] | PIN-PISTON | ||
| 253-1752 | [2] | PLATE-THRUST | ||
| 7W-2315 | [13] | RETAINER | ||
| 7E-5665 | [2] | RETAINER-PIN | ||
| 134-3761 | [2] | RING-PISTON (TOP) | ||
| 2P-2817 | [2] | RING-PISTON (INTERMEDIATE) | ||
| 7N-7078 | [2] | RING-PISTON (OIL CONTROL) | ||
| 160-8178 | [1] | ROD AS-CONNECTING | ||
| 6N-7175 | [6] | ROTOCOIL AS | ||
| (EACH INCLUDES) | ||||
| 6N-7154 | [1] | ROTOCOIL AS | ||
| 6N-7174 | [1] | SHIELD-OIL | ||
| 110-2220 | [1] | SEAL-LINER | ||
| 142-7072 | [1] | SEAL-LINER | ||
| 142-6217 | [1] | SEAL-O-RING | ||
| 5P-8119 | [13] | SEAL-O-RING | ||
| 117-9712 | [1] | SHAFT-DRIVE IDLER | ||
| 4N-5906 | [6] | SPRING-VALVE | ||
| 6L-8562 | [4] | STUD-TAPERLOCK (3/8-16X1.77-IN) | ||
| 115-2367 | [4] | VALVE-EXHAUST | ||
| 115-2368 | [2] | VALVE-INLET | ||
| 9H-1031 | [2] | WASHER-HARD (24X41.5X6-MM THK) | ||
| 7N-2443 | [1] | WASHER-THRUST (2.508X3.5X0.188-IN THK) | ||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31790597
5N-9004: KIT-ENGINE PARTS
5N-9004 KIT-ENGINE PARTS
MARINE SOCIETY
FOR USE WITH PROPULSION ENGINE AT 2100 RPM
AN ATTACHMENT
MARINE SOCIETY
FOR USE WITH PROPULSION ENGINE AT 2100 RPM
AN ATTACHMENT
For full view, you need register
Parts for your 3412 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 7W-2225 Y | [1] | CYLINDER HEAD AS | ||
| 4W-7018 Y | [9] | INJECTOR GP-FUEL | ||
| 7W-0561 Y | [1] | PUMP GP-FUEL INJECTION | ||
| 1W-5285 Y | [1] | TURBOCHARGER GP | ||
| 9L-5854 | [1] | BAND-FILLER (130.2-MM ID) | ||
| 328-5574 | [2] | BEARING-CONNECTING ROD (STANDARD) | ||
| 4W-5702 AB | BEARING-CONNECTING ROD (0.635-MM US) | |||
| 4W-5703 AB | BEARING-CONNECTING ROD (1.27-MM US) | |||
| 211-0592 | [1] | BEARING-MAIN (STANDARD) | ||
| 4W-5698 AB | BEARING-MAIN (0.63-MM US) | |||
| 4W-5699 AB | BEARING-MAIN (1.27-MM US) | |||
| 4W-5700 AB | BEARING-MAIN (0.63-MM OS) | |||
| 4W-5701 AB | BEARING-MAIN (0.63-MM OS, 0.63-MM US) | |||
| 4N-6658 | [1] | BUSHING (1.3-IN WIDE) | ||
| 9Y-7212 | [1] | BODY AS-PISTON | ||
| 3P-1323 | [2] | BOLT-BEARING CAP (7/8-14X7.75-IN) | ||
| 7W-8301 | [3] | FASTENER GP-CYLINDER HEAD | ||
| (EACH INCLUDES) | ||||
| 5H-1504 | [1] | WASHER-HARD (20X33.5X5-MM THK) | ||
| 124-1855 | [1] | BOLT-12 POINT HEAD (3/4-16X7.638-IN) | ||
| 4N-1151 | [1] | GASKET | ||
| 4H-9541 | [1] | GASKET | ||
| 7C-0307 | [7] | GASKET | ||
| 9F-7450 | [1] | GASKET | ||
| 9L-6924 | [1] | GASKET | ||
| 283-5666 | [1] | GASKET-CYLINDER HEAD | ||
| 129-9452 | [4] | GASKET-EXHAUST MANIFOLD | ||
| 1S-4810 | [1] | GASKET-OIL DRAIN | ||
| 1S-6595 | [1] | GASKET-OIL SUPPLY | ||
| 6N-9133 | [1] | GASKET-PLATE | ||
| 4N-1156 | [2] | GASKET-REGULATOR COVER | ||
| 4N-1918 | [1] | GASKET-WOUND | ||
| 271-5661 | [1] | GEAR AS-IDLER (43-TEETH) | ||
| 101-3374 | [1] | GEAR (86-TEETH) | ||
| 7N-7591 | [1] | GEAR-CRANKSHAFT (80-TEETH) | ||
| 173-7188 | [6] | GUIDE-VALVE | ||
| 1W-5283 | [4] | INSERT-VALVE SEAT (EXHAUST)(STANDARD) | ||
| 7C-5353 AB | INSERT-VALVE SEAT (0.51-MM OS, EXHAUST) | |||
| 7C-5354 AB | INSERT-VALVE SEAT (0.76-MM OS, EXHAUST) | |||
| 4N-5893 | [2] | INSERT-VALVE SEAT (INLET)(STANDARD) | ||
| 7C-7602 AB | INSERT-VALVE SEAT (0.13-MM OS, INLET) | |||
| 7C-7603 AB | INSERT-VALVE SEAT (0.25-MM OS, INLET) | |||
| 7C-7604 AB | INSERT-VALVE SEAT (0.51-MM OS, INLET) | |||
| 7C-7605 AB | INSERT-VALVE SEAT (0.76-MM OS, INLET) | |||
| 1B-8705 | [1] | KEY-WOODRUFF | ||
| 140-7682 | [1] | KIT-GASKET (TURBOCHARGER MOUNTING) | ||
| 9Y-6188 AB | KIT-ROD BEARING (STANDARD) | |||
| 9Y-6189 AB | KIT-ROD BEARING (0.635-MM US) | |||
| 9Y-6190 AB | KIT-ROD BEARING (1.27-MM US) | |||
| 6I-0031 | [1] | LINE AS-FUEL INJECTION | ||
| 6I-0032 | [1] | LINE AS-FUEL INJECTION | ||
| 6I-0033 | [1] | LINE AS-FUEL INJECTION | ||
| 6I-0034 | [1] | LINE AS-FUEL INJECTION | ||
| 6I-0036 | [1] | LINE AS-FUEL INJECTION | ||
| 6I-0038 | [1] | LINE AS-FUEL INJECTION | ||
| 9Y-3969 | [1] | LINE AS-FUEL INJECTION | ||
| 124-5945 | [1] | LINE AS-FUEL INJECTION | ||
| 124-5947 | [1] | LINE AS-FUEL INJECTION | ||
| 197-9322 | [1] | LINER-CYLINDER BLOCK | ||
| 2A-4429 | [12] | LOCK-RETAINER | ||
| 8M-2296 | [4] | NUT-FULL (3/8-16-THD) | ||
| 8N-1608 | [1] | PIN-PISTON | ||
| 253-1752 | [2] | PLATE-THRUST | ||
| 7W-2315 | [9] | RETAINER | ||
| 7E-5665 | [2] | RETAINER-PIN | ||
| 134-3761 | [2] | RING-PISTON (TOP) | ||
| 2P-2817 | [2] | RING-PISTON (INTERMEDIATE) | ||
| 7N-7078 | [2] | RING-PISTON (OIL CONTROL) | ||
| 160-8178 | [1] | ROD AS-CONNECTING | ||
| 6N-7175 | [6] | ROTOCOIL AS | ||
| (EACH INCLUDES) | ||||
| 6N-7154 | [1] | ROTOCOIL AS | ||
| 6N-7174 | [1] | SHIELD-OIL | ||
| 3E-6772 | [16] | SEAL (WATER) | ||
| 5P-5678 | [4] | SEAL | ||
| 9L-9098 | [4] | SEAL-CARBON STOP | ||
| 110-2220 | [1] | SEAL-LINER | ||
| 142-7072 | [1] | SEAL-LINER | ||
| 3S-9643 | [1] | SEAL-LIP TYPE (WATER TEMPERATURE REGULATOR) | ||
| 142-6217 | [1] | SEAL-O-RING | ||
| 5P-8119 | [13] | SEAL-O-RING | ||
| 1H-1023 | [4] | SEAL-O-RING | ||
| 4F-7390 | [1] | SEAL-O-RING | ||
| 8C-5196 | [2] | SEAL-O-RING | ||
| 8M-8283 | [1] | SEAL-O-RING | ||
| 109-0072 | [5] | SEAL-O-RING | ||
| 109-0073 | [1] | SEAL-O-RING | ||
| 109-0076 | [4] | SEAL-O-RING | ||
| 114-2687 | [2] | SEAL-O-RING | ||
| 117-9712 | [1] | SHAFT-DRIVE IDLER | ||
| 4N-5906 | [6] | SPRING-VALVE | ||
| 6L-8562 | [4] | STUD-TAPERLOCK (3/8-16X1.77-IN) | ||
| 122-0321 | [4] | VALVE-EXHAUST | ||
| 122-0322 | [2] | VALVE-INLET | ||
| 9H-1031 | [2] | WASHER-HARD (24X41.5X6-MM THK) | ||
| 114-3364 | [4] | WASHER-SPECIAL (SEALING) | ||
| 7N-2443 | [1] | WASHER-THRUST (2.508X3.5X0.188-IN THK) | ||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31790598
5N-9578: KIT-ENGINE PARTS
5N-9578 KIT-ENGINE PARTS
MARINE SOCIETY
FOR USE WITH PROPULSION ENGINE AT 1800 RPM
AN ATTACHMENT
MARINE SOCIETY
FOR USE WITH PROPULSION ENGINE AT 1800 RPM
AN ATTACHMENT
For full view, you need register
Parts for your 3412 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 7W-2243 Y | [1] | CYLINDER HEAD AS | ||
| 4W-7018 Y | [13] | INJECTOR GP-FUEL | ||
| 7W-0561 Y | [1] | PUMP GP-FUEL INJECTION | ||
| 4W-1232 Y | [1] | TURBOCHARGER GP | ||
| 9L-5854 | [1] | BAND-FILLER (130.2-MM ID) | ||
| 328-5574 | [2] | BEARING-CONNECTING ROD | ||
| 4W-5702 AB | BEARING-CONNECTING ROD (0.635-MM US) | |||
| 4W-5703 AB | BEARING-CONNECTING ROD (1.27-MM US) | |||
| 211-0592 | [1] | BEARING-MAIN (STANDARD) | ||
| 4W-5698 AB | BEARING-MAIN (0.63-MM US) | |||
| 4W-5699 AB | BEARING-MAIN (1.27-MM US) | |||
| 4W-5700 AB | BEARING-MAIN (0.63-MM OS) | |||
| 4W-5701 AB | BEARING-MAIN (0.63-MM OS, 0.63-MM US) | |||
| 4N-6658 | [1] | BUSHING (1.3-IN WIDE) | ||
| 9Y-7212 | [1] | BODY AS-PISTON | ||
| 3P-1323 | [2] | BOLT-BEARING CAP (7/8-14X7.75-IN) | ||
| 7W-8301 | [3] | FASTENER GP-CYLINDER HEAD | ||
| (EACH INCLUDES) | ||||
| 5H-1504 | [1] | WASHER-HARD (20X33.5X5-MM THK) | ||
| 124-1855 | [1] | BOLT-12 POINT HEAD (3/4-16X7.638-IN) | ||
| 271-5656 | [1] | GEAR AS-IDLER (99/43-TEETH) | ||
| 1B-8705 | [1] | KEY-WOODRUFF | ||
| 131-7123 | [1] | BUSHING | ||
| 101-3374 | [1] | GEAR (86-TEETH) | ||
| 151-2940 | [1] | GEAR-CRANKSHAFT (99-TEETH) | ||
| 173-7188 | [6] | GUIDE-VALVE | ||
| 1W-5283 | [4] | INSERT-VALVE SEAT (EXHAUST)(STANDARD) | ||
| 7C-5353 AB | INSERT-VALVE SEAT (0.51-MM OS, EXHAUST) | |||
| 7C-5354 AB | INSERT-VALVE SEAT (0.76-MM OS, EXHAUST) | |||
| 4N-5893 | [2] | INSERT-VALVE SEAT (INLET)(STANDARD) | ||
| 7C-7602 AB | INSERT-VALVE SEAT (0.13-MM OS, INLET) | |||
| 7C-7603 AB | INSERT-VALVE SEAT (0.25-MM OS, INLET) | |||
| 7C-7604 AB | INSERT-VALVE SEAT (0.51-MM OS, INLET) | |||
| 7C-7605 AB | INSERT-VALVE SEAT (0.76-MM OS, INLET) | |||
| 1B-8705 | [1] | KEY-WOODRUFF | ||
| 292-2960 | [1] | KIT-GASKET (SINGLE CYLINDER HEAD) | ||
| (INCLUDES GASKETS & SEAL-O-RINGS) | ||||
| 6V-0233 | [1] | KIT-GASKET (TURBOCHARGER MOUNTING) | ||
| (INCLUDES GASKETS & SEAL-O-RINGS) | ||||
| 9Y-6188 AB | KIT-ROD BEARING (STANDARD) | |||
| (INCLUDES 6 BEARINGS) | ||||
| 9Y-6189 AB | KIT-ROD BEARING (0.635-MM US) | |||
| (INCLUDES 6 BEARINGS) | ||||
| 9Y-6190 AB | KIT-ROD BEARING (1.27-MM US) | |||
| (INCLUDES 6 BEARINGS) | ||||
| 4P-7801 | [1] | LINE AS-FUEL INJECTION (NO. 1) | ||
| 4P-7802 | [1] | LINE AS-FUEL INJECTION (NO. 2) | ||
| 4P-7803 | [1] | LINE AS-FUEL INJECTION (NO. 3) | ||
| 4P-7804 | [1] | LINE AS-FUEL INJECTION (NO. 4) | ||
| 4P-7805 | [1] | LINE AS-FUEL INJECTION (NO. 5) | ||
| 4P-7806 | [1] | LINE AS-FUEL INJECTION (NO. 6)(NO. 6) | ||
| 4P-7807 | [1] | LINE AS-FUEL INJECTION (NO. 7) | ||
| 4P-7808 | [1] | LINE AS-FUEL INJECTION (NO. 8) | ||
| 4P-7809 | [1] | LINE AS-FUEL INJECTION (NO. 9) | ||
| 4P-7810 | [1] | LINE AS-FUEL INJECTION (NO. 10) | ||
| 4P-7811 | [1] | LINE AS-FUEL INJECTION (NO. 11) | ||
| 4P-7812 | [1] | LINE AS-FUEL INJECTION (NO. 12) | ||
| 9Y-3969 | [1] | LINE AS-FUEL INJECTION | ||
| 8L-2779 | [1] | SEAL-O-RING | ||
| 197-9322 | [1] | LINER-CYLINDER BLOCK | ||
| 2A-4429 | [12] | LOCK-RETAINER | ||
| 2N-2766 | [4] | LOCKNUT (3/8-16-THD) | ||
| 8N-1608 | [1] | PIN-PISTON | ||
| 253-1752 | [2] | PLATE-THRUST | ||
| 7W-2315 | [13] | RETAINER | ||
| 7E-5665 | [2] | RETAINER-PIN | ||
| 134-3761 | [2] | RING-PISTON (TOP) | ||
| 2P-2817 | [2] | RING-PISTON (INTERMEDIATE) | ||
| 7N-7078 | [2] | RING-PISTON (OIL CONTROL) | ||
| 160-8178 | [1] | ROD AS-CONNECTING | ||
| 6N-8942 | [2] | BOLT-CONNECTING ROD | ||
| 8L-3441 | [2] | NUT (9/16-18-THD) | ||
| 6N-7175 | [6] | ROTOCOIL AS | ||
| (EACH INCLUDES) | ||||
| 6N-7154 | [1] | ROTOCOIL AS | ||
| 6N-7174 | [1] | SHIELD-OIL | ||
| 110-2220 | [1] | SEAL-LINER | ||
| 142-7072 | [1] | SEAL-LINER | ||
| 142-6217 | [1] | SEAL-O-RING | ||
| 5P-8119 | [13] | SEAL-O-RING | ||
| 117-9712 | [1] | SHAFT-DRIVE IDLER | ||
| 4N-5906 | [6] | SPRING-VALVE | ||
| 6L-8562 | [4] | STUD-TAPERLOCK (3/8-16X1.77-IN) | ||
| 115-2367 | [4] | VALVE-EXHAUST | ||
| 115-2368 | [2] | VALVE-INLET | ||
| 9H-1031 | [2] | WASHER-HARD (24X41.5X6-MM THK) | ||
| 7N-2443 | [1] | WASHER-THRUST (2.508X3.5X0.188-IN THK) | ||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31790599
7C-3431: KIT-ENGINE PARTS
7C-3431 KIT-ENGINE PARTS
MARINE SOCIETY
FOR USE WITH PROPULSION ENGINE AT 2100 RPM
AN ATTACHMENT
MARINE SOCIETY
FOR USE WITH PROPULSION ENGINE AT 2100 RPM
AN ATTACHMENT
For full view, you need register
Parts for your 3412 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 7W-2243 Y | [1] | CYLINDER HEAD AS | ||
| 4W-7018 Y | [13] | INJECTOR GP-FUEL | ||
| 7W-0561 Y | [1] | PUMP GP-FUEL INJECTION | ||
| 4W-1148 Y | [1] | TURBOCHARGER GP | ||
| 9L-5854 | [1] | BAND-FILLER (130.2-MM ID) | ||
| 328-5574 | [2] | BEARING-CONNECTING ROD (STANDARD) | ||
| 4W-5702 AB | BEARING-CONNECTING ROD (0.635-MM US) | |||
| 4W-5703 AB | BEARING-CONNECTING ROD (1.27-MM US) | |||
| 217-0586 AB | BEARING-CONNECTING ROD (STANDARD) | |||
| 211-0592 | [1] | BEARING-MAIN (STANDARD) | ||
| 4W-5698 AB | BEARING-MAIN (0.63-MM US) | |||
| 4W-5699 AB | BEARING-MAIN (1.27-MM US) | |||
| 4W-5700 AB | BEARING-MAIN (0.63-MM OS) | |||
| 4W-5701 AB | BEARING-MAIN (0.63-MM OS, 0.63-MM US) | |||
| 9Y-7212 | [1] | BODY AS-PISTON | ||
| 3P-1323 | [2] | BOLT-BEARING CAP (7/8-14X7.75-IN) | ||
| 4N-6658 | [1] | BUSHING (1.3-IN WIDE) | ||
| 7W-8301 | [3] | FASTENER GP-CYLINDER HEAD | ||
| (EACH INCLUDES) | ||||
| 5H-1504 | WASHER-HARD (20X33.5X5-MM THK) | |||
| 124-1855 | BOLT-12 POINT HEAD (3/4-16X7.638-IN) | |||
| 101-3374 | [1] | GEAR (86-TEETH) | ||
| 271-5656 | [1] | GEAR AS-IDLER (99/43-TEETH) | ||
| 151-2940 | [1] | GEAR-CRANKSHAFT (99-TEETH) | ||
| 173-7188 | [6] | GUIDE-VALVE | ||
| 1W-5283 | [4] | INSERT-VALVE SEAT (EXHAUST)(STANDARD) | ||
| 7C-5353 AB | INSERT-VALVE SEAT (0.51-MM OS, EXHAUST) | |||
| 7C-5354 AB | INSERT-VALVE SEAT (0.76-MM OS, EXHAUST) | |||
| 4N-5893 | [2] | INSERT-VALVE SEAT (INLET)(STANDARD) | ||
| 7C-7602 AB | INSERT-VALVE SEAT (0.13-MM OS, INLET) | |||
| 7C-7603 AB | INSERT-VALVE SEAT (0.25-MM OS, INLET) | |||
| 7C-7604 AB | INSERT-VALVE SEAT (0.51-MM OS, INLET) | |||
| 7C-7605 AB | INSERT-VALVE SEAT (0.76-MM OS, INLET) | |||
| 1B-8705 | [1] | KEY-WOODRUFF | ||
| 292-2960 | [1] | KIT-GASKET (SINGLE CYLINDER HEAD) | ||
| 6V-0233 | [1] | KIT-GASKET (TURBOCHARGER MOUNTING) | ||
| 9Y-6188 AB | KIT-ROD BEARING (STANDARD) | |||
| 9Y-6189 AB | KIT-ROD BEARING (0.635-MM US) | |||
| 9Y-6190 AB | KIT-ROD BEARING (1.27-MM US) | |||
| 4P-7801 | [1] | LINE AS-FUEL INJECTION (NO. 1) | ||
| 4P-7802 | [1] | LINE AS-FUEL INJECTION (NO. 2) | ||
| 4P-7803 | [1] | LINE AS-FUEL INJECTION (NO. 3) | ||
| 4P-7804 | [1] | LINE AS-FUEL INJECTION (NO. 4) | ||
| 4P-7805 | [1] | LINE AS-FUEL INJECTION (NO. 5) | ||
| 4P-7806 | [1] | LINE AS-FUEL INJECTION (NO. 6)(NO. 6) | ||
| 4P-7807 | [1] | LINE AS-FUEL INJECTION (NO. 7) | ||
| 4P-7808 | [1] | LINE AS-FUEL INJECTION (NO. 8) | ||
| 4P-7809 | [1] | LINE AS-FUEL INJECTION (NO. 9) | ||
| 4P-7810 | [1] | LINE AS-FUEL INJECTION (NO. 10) | ||
| 4P-7811 | [1] | LINE AS-FUEL INJECTION (NO. 11) | ||
| 4P-7812 | [1] | LINE AS-FUEL INJECTION (NO. 12) | ||
| 9Y-3969 | [1] | LINE AS-FUEL INJECTION | ||
| 197-9322 | [1] | LINER-CYLINDER BLOCK | ||
| 2A-4429 | [12] | LOCK-RETAINER | ||
| 8M-2296 | [4] | NUT-FULL (3/8-16-THD) | ||
| 8N-1608 | [1] | PIN-PISTON | ||
| 253-1752 | [2] | PLATE-THRUST | ||
| 7W-2315 | [13] | RETAINER | ||
| 7E-5665 | [2] | RETAINER-PIN | ||
| 134-3761 | [2] | RING-PISTON (TOP) | ||
| 2P-2817 | [2] | RING-PISTON (INTERMEDIATE) | ||
| 7N-7078 | [2] | RING-PISTON (OIL CONTROL) | ||
| 160-8178 | [1] | ROD AS-CONNECTING | ||
| 6N-7175 | [6] | ROTOCOIL AS | ||
| 110-2220 | [1] | SEAL-LINER | ||
| 142-7072 | [1] | SEAL-LINER | ||
| 142-6217 | [1] | SEAL-O-RING | ||
| 5P-8119 | [13] | SEAL-O-RING | ||
| 117-9712 | [1] | SHAFT-DRIVE IDLER | ||
| 4N-5906 | [6] | SPRING-VALVE | ||
| 6L-8562 | [4] | STUD-TAPERLOCK (3/8-16X1.77-IN) | ||
| 115-2367 | [4] | VALVE-EXHAUST | ||
| 115-2368 | [2] | VALVE-INLET | ||
| 9H-1031 | [2] | WASHER-HARD (24X41.5X6-MM THK) | ||
| 7N-2443 | [1] | WASHER-THRUST (2.508X3.5X0.188-IN THK) | ||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
BASIC ENGINE
PARTS GP-MISCELLANEOUS
Engine News
Disassembly and Assembly
Service Magazine
Caterpillar Parts SIS Catalog 3412 :
Truck sale:
95,720
96,795
93,569
60,000
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
159,600
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY