AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

207-5262 ELECTRONICS GP-MACHINE S/N BMM338-UP; BKW235-UP PART OF 227-7091 INSTALLATION GP-SECURITY AN ATTACHMENT 325C


ELECTRICAL AND STARTING SYSTEM
ELECTRONICS GP-MACHINE
ELECTRONICS GP-MONITOR
HARNESS GP
ELECTRONICS GP-MACHINE
LIGHTING GP

EXCAVATOR 325C EXCAVATOR BKW
 325C & 325C L Excavators BKW00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3180 325C BKW   (2001)

ELECTRICAL AND STARTING SYSTEM

ELECTRONICS GP-MACHINE
CONTROL & MTG GP-MACHINE
177-7703 CONTROL & MTG GP-MACHINE
185-2462 ELECTRONICS GP-MACHINE
185-2464 ELECTRONICS GP-MACHINE
ELECTRONICS GP-MACHINE
207-5262 ELECTRONICS GP-MACHINE
INSTALLATION GP-SECURITY
227-7091 INSTALLATION GP-SECURITY
 

#SEBP31800190
 

207-5262: ELECTRONICS GP-MACHINE

207-5262 ELECTRONICS GP-MACHINE
S/N BMM338-UP; BKW235-UP
PART OF 227-7091 INSTALLATION GP-SECURITY
AN ATTACHMENT
i02229963 SEBP3180
2075262 ELECTRONICS GP-MACHINE Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 156-6155 [1] CONTROL GP-UNPROGRAMMED (SECURITY)  
1A. 7X-6315 [1] STRAP AS-GROUND  
1B. 184-2472 [1] SCREW-PAN HEAD (8-32X0.375-IN)  
1C. 134-4126 [1] WASHER (4.52X8.28X0.76-MM THK)  
2. 243-6464 [1] SOFTWARE GP-MACHINE (SECURITY)  
3. 206-5162 [2] KEY AS-ELECTRONIC (SECURITY)  
    -OR-
  206-5165 [2] KEY AS-ELECTRONIC (SECURITY)  
4. 219-6314 [2] KEY RING (IDENTIFICATION)  
 

#SEBP31800191
 

177-7680: ELECTRONICS GP-MONITOR

177-7680 ELECTRONICS GP-MONITOR
S/N BMM1-UP; BKW1-UP
AN ATTACHMENT
i01390460 SEBP3180
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  221-8837 [1] SOFTWARE GP-MONITOR  
    -OR-
  221-8842 Y [1] MONITOR GP-OPERATOR  
    (OPTIONAL SERVICE REPLACEMENT) (INCLUDES CONTROL GP & SOFTWARE)
  Y   SEPARATE ILLUSTRATION
 

#SEBP31800192
 

177-7683: ELECTRONICS GP-MONITOR

177-7683 ELECTRONICS GP-MONITOR
S/N BMM1-UP; BKW1-UP
AN ATTACHMENT
i01390462 SEBP3180
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  247-5143 [1] SOFTWARE GP-MONITOR  
    -OR-
  247-5151 Y [1] MONITOR GP-OPERATOR  
    (OPTIONAL SERVICE REPLACEMENT) (INCLUDES CONTROL GP & SOFTWARE)
  Y   SEPARATE ILLUSTRATION
 

#SEBP31800193
 

177-7686: ELECTRONICS GP-MONITOR

177-7686 ELECTRONICS GP-MONITOR
S/N BMM1-UP; BKW1-UP
AN ATTACHMENT
i01390464 SEBP3180
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  247-5142 [1] SOFTWARE GP-MONITOR  
    -OR-
  247-5150 Y [1] MONITOR GP-OPERATOR  
    (OPTIONAL SERVICE REPLACEMENT) (INCLUDES CONTROL GP & SOFTWARE)
  Y   SEPARATE ILLUSTRATION
 

#SEBP31800194
 

177-7689: ELECTRONICS GP-MONITOR

177-7689 ELECTRONICS GP-MONITOR
S/N BMM1-UP; BKW1-UP
AN ATTACHMENT
i01340929 SEBP3180
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  247-5140 [1] SOFTWARE GP-MONITOR  
    -OR-
  247-5148 Y [1] SERVICE GP-MONITOR  
    (OPTIONAL SERVICE REPLACEMENT) (INCLUDES CONTROL GP & SOFTWARE)
  Y   SEPARATE ILLUSTRATION
 

#SEBP31800195
 

185-2524: ELECTRONICS GP-MONITOR

185-2524 ELECTRONICS GP-MONITOR
S/N BMM1-UP; BKW1-UP
AN ATTACHMENT
i01390457 SEBP3180
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  247-5144 [1] SOFTWARE GP-MONITOR  
    -OR-
  247-5152 Y [1] MONITOR GP-OPERATOR  
    (OPTIONAL SERVICE REPLACEMENT) (INCLUDES CONTROL GP & SOFTWARE)
  Y   SEPARATE ILLUSTRATION
 

#SEBP31800196
 

227-7726: ELECTRONICS GP-MONITOR

227-7726 ELECTRONICS GP-MONITOR
S/N BMM1-UP; BKW1-UP
AN ATTACHMENT
i02102312 SEBP3180
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  247-5254 [1] SOFTWARE GP-MONITOR  
    -OR-
  247-5255 Y [1] MONITOR GP-OPERATOR  
    (OPTIONAL SERVICE REPLACEMENT) (INCLUDES CONTROL GP & SOFTWARE)
  Y   SEPARATE ILLUSTRATION
 

#SEBP31800197
 

195-7336: HARNESS AS-ENGINE

195-7336 HARNESS AS-ENGINE
S/N 5GG1-UP
PART OF 190-5038 WIRING GP-ENGINE
i05797311 SEBP3180
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  126-1774 [1] COVER-CONNECTOR  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
  102-8802 [3] KIT-RECEPTACLE (2-PIN)  
  102-8803 [4] KIT-RECEPTACLE (3-PIN)  
    (EACH INCLUDES RECEPTACLE, WEDGE AS, & INTERFACE SEALS)
  9X-3401 [26] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [26] PIN-CONNECTOR (14-GA TO 16-GA)  
  100-3320 [1] PLUG AS-CONNECTOR (2-PIN)  
  126-5011 [1] SEAL-CONNECTOR  
  111-2416 [1] PLUG AS-CONNECTOR (2-PIN)  
  126-5011 [1] SEAL-CONNECTOR  
  160-7690 [1] PLUG AS-CONNECTOR (70-PIN)  
  159-9322 [1] SEAL-O-RING  
  140-7339 [1] PLUG-CONNECTOR  
  8T-8737 [44] PLUG-SEAL  
  123-1200 [1] SEAL-CABLE (CABLE)  
  123-1199 [1] SEAL-CONNECTOR  
  114-8843 E SLEEVE-PLASTIC (220-CM)  
  123-1198 [2] SOCKET-TERMINAL  
  3S-2093 [2] STRAP-CABLE  
  305-5362 [4] TERMINAL AS (18-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(27-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(17-CM)  
  194-5226 [43] WIRE AS (16-GA)  
    -OR-
  194-5227 [43] WIRE AS (14-GA)  
  E   ORDER BY THE CENTIMETER
 

#SEBP31800198
 

227-7091: INSTALLATION GP-SECURITY

227-7091 INSTALLATION GP-SECURITY
S/N BMM338-UP; BKW235-UP
AN ATTACHMENT
i02496865 SEBP3180
2277091 INSTALLATION GP-SECURITY Parts scheme 2277091 INSTALLATION GP-SECURITY Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [35] STRAP-CABLE  
2. 227-7069 [1] HARNESS AS-CHASSIS  
  3S-2093 [8] STRAP-CABLE  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  150-6766 [1] PLUG AS-CONNECTOR (26-PIN)  
  159-9322 [1] SEAL-O-RING  
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
3. 3S-2093 [5] STRAP-CABLE  
4. 224-2928 [1] HARNESS AS-CONTROL (MACHINE SECURITY SYSTEM)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
5. 222-3870 [1] COIL AS (FERRITE)  
  5P-5677 D WIRE (18-GA, BLACK)(0.4-M)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1813 E SLEEVE (15-CM)  
6. 227-7094 [1] SHEET AS  
7. 7X-2621 M [4] BOLT (M10X1.5X12-MM)  
8. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
9. 207-5262 Y [1] ELECTRONICS GP-MACHINE (SECURITY)  
11. 7X-0818 M [3] BOLT (M8X1.25X45-MM)  
12. 9N-0869 [3] WASHER-HARD (8.8X25.5X2-MM THK)  
13. 155-0576 [6] MOUNT-ISOLATION  
14. 6I-1418 [3] SPACER (8.2X12.7X28.7-MM THK)  
15. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
16. 111-4837 [1] CLIP  
17. 8T-4196 M [1] BOLT (M10X1.5X35-MM)  
18. 224-2926 [1] HARNESS AS-CAB (SIDE PANEL, RH)  
  3S-2093 [2] STRAP-CABLE  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
20. 224-2930 [1] BRACKET AS  
21. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
22. 149-5050 [2] RELAY (24-VOLT)  
23. 3C-1878 M [2] SCREW-MACHINE (M6X1X10-MM)  
24. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
25. 227-7070 [1] HARNESS AS-CONSOLE (RH)  
  3S-2093 [8] STRAP-CABLE  
  7K-1181 [1] STRAP-CABLE  
  8C-5064 E CONDUIT-FLEXIBLE (17.75-MM ID, SPLIT)(18-CM)  
  204-1856 [1] CONDUIT  
  102-8802 [3] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [3] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [3] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
26. 163-6795 [1] STRAP-CABLE  
27. 224-2929 [1] COVER AS  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  165-5655 [1] LAMP AS (24-VOLT)  
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
28. 224-2934 [1] PANEL  
29. 6V-5210 M [4] SCREW-MACHINE (M4X0.7X10-MM)  
30. 096-6166 [4] WASHER-HARD (4.5X9X1-MM THK)  
31. 206-5208 [1] COIL AS (EXCITER)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  205-8257 [1] COIL AS (EXCITER)  
  5P-5677 D WIRE (18-GA, BLACK)(0.4-M)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP31800199
 

489-5118: KIT-LIGHTING

489-5118 KIT-LIGHTING
S/N BMM1-UP; BKW1-UP
FIELD INSTALLATION
i06538661 SEBP3180
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8T-4137 M [2] BOLT (M10X1.5X20-MM)  
  170-9295 [2] HARNESS AS-LIGHTING  
  7Y-3962 [2] TERMINAL-BULLET (MALE)  
  7Y-3964 [2] TUBE (CONNECTOR TERMINAL)  
  7Y-3963 [2] TERMINAL-BULLET (FEMALE)  
  7Y-3965 [2] TUBE (RECEPTACLE TERMINAL)  
  183-1035 [2] LAMP GP-FLOOD (24-VOLT)  
  9X-3463 [1] LAMP-HALOGEN (24-VOLT, 70-WATT)  
  8T-4133 M [2] NUT (M10X1.5-THD)  
  163-6795 [2] STRAP-CABLE  
  8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
  M   METRIC PART
 

Information:

Engine News
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22
Special Instruction
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Tool Operating Manual
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Troubleshooting
CID 0296 FMI 09 Unable to communicate with Transmission ECM
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Service Magazine
A New Version of Caterpillar Electronic Technician (ET) is Now Available {0785, 7600, 7610}
2008/05/19
New Firmware Is Now Available for Communications Adapter 3 {7610, 7620}
2011/10/20
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

Caterpillar Parts SIS Catalog 325C :

185-2464 ELECTRONICS GP-MACHINE
185-2462 ELECTRONICS GP-MACHINE
185-2463 ELECTRONICS GP-IMPLEMENT
CONTROL GP-ENGINE ELECTRONIC
210-0848 CONTROL GP-ENGINE ELECTRONIC
CONTROL & MTG GP-MACHINE
177-7703 CONTROL & MTG GP-MACHINE
CONTROL & MTG GP-IMPLEMENT
177-7704 CONTROL & MTG GP-IMPLEMENT
CONTROL & MTG GP-ENGINE ELEK
183-1195 CONTROL & MTG GP-ENGINE ELEK
CONTROL & MTG GP-ENGINE ELEK
183-1195 CONTROL & MTG GP-ENGINE ELEK
177-7680 ELECTRONICS GP-MONITOR
177-7683 ELECTRONICS GP-MONITOR
177-7686 ELECTRONICS GP-MONITOR
177-7689 ELECTRONICS GP-MONITOR
185-2524 ELECTRONICS GP-MONITOR
227-7726 ELECTRONICS GP-MONITOR
195-7336 HARNESS AS-ENGINE
INSTALLATION GP-SECURITY
227-7091 INSTALLATION GP-SECURITY

Truck sale:

 
 
Caterpillar 325C
- Crawler Excavators
WESTERN STATES EQUIPMENT
 
304,350 
Caterpillar 325 CF, Crawler Excavators, Construction

WHEELER MACHINERY CO.
 
304,355 
Caterpillar 325 CF, Crawler Excavators, Construction

WHEELER MACHINERY CO.
 
 
Caterpillar 325C, Raupenbagger, Bau-Und Bergbauausrüstung
- Crawler excavators
WESTERN STATES EQUIPMENT
Caterpillar 325 CF, Crawler Excavators, Construction
270,965 
Caterpillar 325 CF, Crawler Excavators, Construction
- Crawler excavators
WHEELER MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.