AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

259-0759 CYLINDER GP-BUCKET S/N BMM1-UP; BKW1-UP 160-MM (6.3-IN) BORE X 1356-MM (53.4-IN) STROKE PART OF 259-0758 CYLINDER & SEAL GP-BUCKET AN ATTACHMENT 325C


HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP

EXCAVATOR 325C EXCAVATOR BKW
 325C & 325C L Excavators BKW00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3180 325C BKW   (2001)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-BUCKET
247-8853 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
247-8854 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
259-0759 CYLINDER GP-BUCKET
CYLINDER GP-COUPLER
389-7213 CYLINDER GP-COUPLER
CYLINDER GP-HYDRAULIC
313-6174 CYLINDER GP-HYDRAULIC
CYLINDER GP-THUMB
417-0226 CYLINDER GP-THUMB
 

#SEBP31800450
 

259-0759: CYLINDER GP-BUCKET

259-0759 CYLINDER GP-BUCKET
S/N BMM1-UP; BKW1-UP
160-MM (6.3-IN) BORE X 1356-MM (53.4-IN) STROKE
PART OF 259-0758 CYLINDER & SEAL GP-BUCKET
AN ATTACHMENT
i02504696 SEBP3180
2590759 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-3604 J [1] SEAL AS  
2. 118-3936 [1] CYLINDER AS  
2A. 087-5533 [1] BUSHING  
3. 123-2111 [1] PISTON  
4. 123-2112 M [1] LOCKNUT-SPECIAL (M90X2-THD)  
5. 247-8905 [1] ROD AS  
5A. 087-5548 [1] BUSHING  
6. 259-0734 J [1] SEAL-U-CUP  
7. 266-7957 J [1] SEAL-BUFFER  
8. 266-7960 J [1] SEAL-O-RING  
9. 7Y-4941 J [1] RING-BACKUP  
10. 7Y-4944 [1] RING-RETAINING  
11. 087-5551 [1] HEAD  
12. 165-9291 J [1] SEAL-LIP TYPE  
13. 087-5550 J [1] RING-BACKUP  
14. 096-3201 J [1] RING  
15. 114-0762 [1] BUSHING  
16. 118-3944 J [1] RING  
17. 7Y-5239 M [8] BOLT-SOCKET HEAD (M24X3X100-MM)  
   
    AVAILABLE REPAIR KIT(S):
  259-0756 J [1] KIT-SEAL (CYLINDER)(BUCKET)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP31800451
 

389-7213: CYLINDER GP-COUPLER

389-7213 CYLINDER GP-COUPLER
S/N BMM1-UP; BKW1-UP
63.5-MM (2.5-IN) BORE X 139.7-MM (5.5-IN) STROKE
PART OF 521-6449 COUPLER GP-QUICK
AN ATTACHMENT
i05783022 SEBP3180
3897213 CYLINDER GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 237-0947 J [1] VALVE GP-CHECK (PILOT OPERATED)  
2. 3J-1907 [1] SEAL-O-RING  
3. 3J-7354 [1] SEAL-O-RING  
4. 9S-8002 [1] PLUG (7/16-20-THD)  
5. 9S-8004 [1] PLUG (9/16-18-THD)  
6. 9F-2167 [1] SCREW-PURGE (3/8-24X1.164-IN)  
   
    AVAILABLE REPAIR KIT(S):
  453-6523 [1] KIT-PACKING (COUPLER CYLINDER)  
    (INCLUDES O RINGS, BACK-UP RINGS, DUST SEAL, BP SEAL & POLYPAK SEAL)
  213-8433 J [1] KIT-SEAL (CHECK VALVE)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

#SEBP31800452
 

313-6174: CYLINDER GP-HYDRAULIC

313-6174 CYLINDER GP-HYDRAULIC
S/N BKW1-UP
70-MM (2.8-IN) BORE X 100-MM (3.9-IN) STROKE
PART OF 252-0293 COUPLER GP-QUICK
AN ATTACHMENT
i06826364 SEBP3180
3136174 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 091-5928 [2] FITTING-GREASE  
2. 172-8406 [1] VALVE GP-CHECK  
  2U-5338 [1] SEAL-O-RING  
  9W-3340 [1] SEAL-O-RING  
  107-7640 [1] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  252-5503 [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (KIT INCLUDES PISTON SEAL, BEARING RING, O-RINGS, BACKUP RING, GLAND SEAL & WIPER SEAL)
 

#SEBP31800453
 

417-0226: CYLINDER GP-THUMB

417-0226 CYLINDER GP-THUMB
S/N BKW1-UP
1270-MM (5.0-IN) BORE X 1048-MM (41.25-IN) STROKE
PART OF 500-5117 THUMB GP
AN ATTACHMENT
i06578044 SEBP3180
4170226 CYLINDER GP-THUMB Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 418-0239 [1] TUBE AS  
2. 384-3960 [1] ROD AS  
3. 270-9250 [1] HEAD  
4. 386-4026 [1] PISTON  
5. 196-2425 [12] BOLT (5/8-11X1.75-IN)  
6. 312-4247 [1] SEAL-WIPER  
7. 312-4245 [1] SEAL-U-CUP  
8. 8C-9161 [1] RING-WEAR  
9. 312-4248 [1] SEAL AS-BUFFER  
10. 5F-3144 [1] SEAL-O-RING  
11. 2K-4096 [1] RING-BACKUP  
12. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
13. 8T-0277 [3] PIN-SPRING  
14. 3Y-9267 [3] BALL  
15. 268-8864 [1] ORIFICE  
16. 7F-8268 [1] SEAL-O-RING  
17. 030-6129 [1] RING-BACKUP  
18. 268-8867 [1] RING-PISTON  
19. 226-3860 [1] RING-WEAR  
20. 9X-7264 [1] SEAL AS  
21. 270-5275 [1] SEAL-BACKUP  
22. 7R-8872 [1] SEAL-O-RING  
23. 116-3588 [4] BUSHING  
   
    AVAILABLE REPAIR KIT(S):
  270-9318 [1] KIT-SEAL (THUMB CYLINDER)  
 

#SEBP31800454
 

191-5537: DRIVE GP-AUXILIARY PUMP

191-5537 DRIVE GP-AUXILIARY PUMP
S/N BKW1-UP
AN ATTACHMENT
i01458566 SEBP3180
1915537 DRIVE GP-AUXILIARY PUMP Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-7402 M [8] BOLT-SOCKET HEAD (M12X1.75X30-MM)  
2. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
3. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
4. 191-5601 [2] BEARING  
5. 096-0121 [1] SEAL-O-RING  
6. 191-5541 [1] COVER  
7. 8T-5049 [1] SEAL-O-RING  
8. 177-2585 [1] COVER  
9. 173-3436 [1] COVER  
10. 095-1680 [1] SEAL-O-RING  
11. 9S-4191 [1] PLUG (9/16-18-THD)  
12. 3J-1907 [1] SEAL-O-RING  
13. 099-2096 [2] BALL BEARING  
14. 173-3406 [1] SHAFT  
15. 191-5540 [1] GEAR (39-TEETH)  
16. 191-5539 [1] SHAFT  
17. 129-7857 [1] GASKET  
18. 094-1875 [2] DOWEL  
  M   METRIC PART
 

#SEBP31800455
 

191-2693: DRIVE GP-SWING

191-2693 DRIVE GP-SWING -WITHOUT MOTOR
S/N BMM1-939; BKW1-416
PART OF 199-4487 DRIVE GP-SWING
i01543678 SEBP3180
1912693 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-7466 [4] GEAR-PLANETARY (23-TEETH)  
2. 231-6864 [1] BREATHER AS (SWING DRIVE)  
2A. 114-8234 [1] BREATHER (SWING DRIVE)  
2B. 093-5150 [1] COUPLING-PIPE  
2C. 231-6969 [1] NIPPLE-PIPE  
3. 6V-7238 [1] VALVE-SHUTOFF (HYDRAULIC OIL)  
4. 7I-7728 [1] CARRIER-PLANETARY  
5. 7Y-0225 [3] SHAFT-PLANETARY  
6. 7Y-1434 [2] SPACER (40X69.5X6-MM THK)  
7. 093-1730 [2] RING-RETAINING  
8. 093-1731 [1] RING-RETAINING  
9. 094-0611 [6] WASHER (47.3X76X1-MM THK)  
10. 094-1528 [8] WASHER (53X84X1-MM THK)  
11. 136-2940 [1] BEARING  
12. 096-2653 [1] RING-RETAINING  
13. 136-2904 [1] BEARING  
14. 114-1383 [4] SHAFT-PLANETARY  
15. 191-2699 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
16. 191-2698 [1] TUBE-GAUGE  
17. 114-1401 [1] COVER-HOUSING  
18. 191-2696 [1] CAGE  
19. 135-9044 [2] SEAL-LIP TYPE  
20. 169-5617 [1] GEAR-SUN (18-TEETH)  
21. 169-5618 [3] GEAR-PLANETARY (27-TEETH)  
22. 191-2579 [1] CARRIER-PLANETARY  
23. 171-9280 [1] GEAR-RING (72-TEETH)  
24. 191-2694 [1] SHAFT-PINION  
25. 191-2695 [1] HOUSING  
26. 171-9283 [1] GEAR-SUN (24-TEETH)  
27. 171-9375 [1] SEAL-O-RING  
28. 191-2697 [1] SPACER (110X140X90.1-MM THK)  
29. 095-0891 [7] PIN-SPRING  
30. 3K-0360 [1] SEAL-O-RING  
31. 8J-8879 [1] SEAL-O-RING  
32. 7Y-0252 [3] BEARING AS-ROLLER  
33. 191-2513 [8] BEARING AS-ROLLER  
34. 8T-4183 M [8] BOLT (M12X1.75X40-MM)  
35. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
36. 8T-6385 M [16] BOLT (M16X2X180-MM)  
37. 9X-8257 [16] WASHER (17.5X30X3.5-MM THK)  
38. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP31800456
 

191-2693: DRIVE GP-SWING

191-2693 DRIVE GP-SWING -WITHOUT MOTOR
S/N BKW417-UP
PART OF 199-4487 DRIVE GP-SWING
i02393268 SEBP3180
1912693 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-7466 [4] GEAR-PLANETARY (23-TEETH)  
2. 227-6221 C [1] BREATHER AS (SWING DRIVE)  
2A. 4H-6112 [1] BREATHER (SWING DRIVE)  
2B. 227-6215 [1] BOSS (1/4-18-THD)  
2C. 267-6785 [1] PIPE  
3. 6V-7238 [1] VALVE-SHUTOFF (HYDRAULIC OIL)  
4. 7I-7728 [1] CARRIER-PLANETARY  
5. 7Y-0225 [3] SHAFT-PLANETARY  
6. 7Y-1434 [2] SPACER (40X69.5X6-MM THK)  
7. 093-1730 [2] RING-RETAINING  
8. 093-1731 [1] RING-RETAINING  
9. 094-0611 [6] WASHER (47.3X76X1-MM THK)  
10. 094-1528 [8] WASHER (53X84X1-MM THK)  
11. 136-2940 [1] BEARING  
12. 096-2653 [1] RING-RETAINING  
13. 136-2904 [1] BEARING  
14. 114-1383 [4] SHAFT-PLANETARY  
15. 114-1398 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
16. 114-1399 [1] PIPE-GAUGE  
17. 114-1401 [1] COVER-HOUSING  
18. 191-2696 [1] CAGE  
19. 135-9044 [2] SEAL-LIP TYPE  
20. 169-5617 [1] GEAR-SUN (18-TEETH)  
21. 169-5618 [3] GEAR-PLANETARY (27-TEETH)  
22. 191-2579 [1] CARRIER-PLANETARY  
23. 171-9280 [1] GEAR-RING (72-TEETH)  
24. 191-2694 [1] SHAFT-PINION  
25. 191-2695 [1] HOUSING  
26. 171-9283 [1] GEAR-SUN (24-TEETH)  
27. 171-9375 [1] SEAL-O-RING  
28. 191-2697 [1] SPACER (110X140X90.1-MM THK)  
29. 509-6676 [7] PIN-SPRING  
30. 3K-0360 [1] SEAL-O-RING  
31. 8J-8879 [1] SEAL-O-RING  
32. 7Y-0252 [3] BEARING AS-ROLLER  
33. 191-2513 [8] BEARING AS-ROLLER  
34. 453-3447 M [8] BOLT (M12X1.75X40-MM)  
35. 451-2182 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
36. 453-2843 M [16] BOLT (M16X2X180-MM)  
37. 451-2175 [16] WASHER-HARD (17.5X30X3.5-MM THK)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP31800457
 

199-4487: DRIVE GP-SWING

199-4487 DRIVE GP-SWING
S/N BMM1-UP; BKW1-UP
PART OF 171-9410 POWER TRAIN AR
i01541252 SEBP3180
1994487 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 191-2693 Y [1] DRIVE GP-SWING (WITHOUT MOTOR)  
2. 179-9774 Y [1] MOTOR & MTG GP-SWING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP31800458
 

418-7154: DRIVE GP-SWING

418-7154 DRIVE GP-SWING -WITHOUT MOTOR
S/N BMM1-UP; BKW1-UP
AN ATTACHMENT
i06708776 SEBP3180
4187154 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-7238 [1] VALVE-SHUTOFF (HYDRAULIC OIL)  
2. 094-0611 [14] WASHER (47.3X76X1-MM THK)  
3. 114-1398 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
4. 114-1399 [1] PIPE-GAUGE  
5. 191-2694 [1] SHAFT-PINION  
6. 191-2696 [1] CAGE  
7. 227-6221 [1] BREATHER AS (SWING DRIVE)  
  4H-6112 [1] BREATHER (SWING DRIVE)  
  227-6215 [1] BOSS (1/4-18-THD)  
  267-6785 [1] PIPE  
8. 296-6268 [3] BEARING AS-ROLLER  
9. 418-7160 [1] GEAR-SUN (13-TEETH, 18-TEETH)  
10. 418-7161 [1] GEAR-SUN (23-TEETH)  
11. 418-7162 [3] GEAR-PLANETARY (25-TEETH)  
12. 418-7163 [4] GEAR-PLANETARY (22-TEETH)  
13. 418-7164 [1] GEAR-RING (69-TEETH)  
14. 418-7167 [4] SHAFT  
15. 418-7196 [1] HOUSING  
16. 418-7232 [1] COVER-HOUSING  
17. 418-7233 [8] BEARING AS-ROLLER  
18. 418-7234 [1] CARRIER AS  
19. 418-7235 [1] CARRIER-PLANETARY  
20. 422-1352 [2] SPACER (49.6X69.5X6-MM THK)  
21. 422-4054 [3] RING-RETAINING  
22. 451-2182 [50] WASHER-HARD (13.5X25.5X3-MM THK)  
23. 453-3447 M [20] BOLT (M12X1.75X40-MM)  
24. 093-1730 [2] RING-RETAINING  
25. 095-0670 M [30] BOLT (M12X1.75X45-MM)  
26. 509-6676 [4] PIN-SPRING  
27. 096-2653 [1] RING-RETAINING  
28. 135-9044 [2] SEAL-LIP TYPE  
29. 136-2904 [1] BEARING  
30. 136-2940 [1] BEARING  
31. 191-2697 [1] SPACER (110X140X90.1-MM THK)  
32. 3K-0360 [1] SEAL-O-RING  
33. 8J-8879 [1] SEAL-O-RING  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP31800459
 

171-9412: FASTENER GP-SWING & FINAL DR

171-9412 FASTENER GP-SWING & FINAL DR
S/N BMM1-UP; BKW1-UP
PART OF 171-9410 POWER TRAIN AR
i01541203 SEBP3180
1719412 FASTENER GP-SWING & FINAL DR Parts scheme 1719412 FASTENER GP-SWING & FINAL DR Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 470-0614 [40] BOLT (M20X2.5X70-MM)  
2. 461-3882 M [16] BOLT (M24X3X70-MM)  
3. 8T-3282 [40] WASHER-HARD (22X35X3.5-MM THK)  
4. 6V-8237 [16] WASHER (26X44X4-MM THK)  
5. 096-4755 [1] PIN  
6. 5D-1026 [1] CLAMP-BAND  
7. 5P-0767 E HOSE (90-CM)  
8. 2B-7561 [2] CORK  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
 

Information:

Special Instruction
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 325C :

CYLINDER GP-BUCKET
247-8854 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
247-8853 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
194-8276 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
177-2465 CYLINDER GP-BUCKET
266-8064 CYLINDER AR-HYDRAULIC
266-8065 CYLINDER AR-BOOM
CYLINDER & SEAL GP-STICK
259-0728 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-STICK
209-6008 CYLINDER & SEAL GP-STICK
CYLINDER GP-COUPLER
389-7213 CYLINDER GP-COUPLER
CYLINDER GP-HYDRAULIC
313-6174 CYLINDER GP-HYDRAULIC
CYLINDER GP-THUMB
417-0226 CYLINDER GP-THUMB
DRIVE GP-AUXILIARY PUMP
191-5537 DRIVE GP-AUXILIARY PUMP
DRIVE GP-SWING
191-2693 DRIVE GP-SWING
DRIVE GP-SWING
191-2693 DRIVE GP-SWING
DRIVE GP-SWING
199-4487 DRIVE GP-SWING
DRIVE GP-SWING
418-7154 DRIVE GP-SWING

Truck sale:

 
 
Caterpillar 325C
- Crawler Excavators
WESTERN STATES EQUIPMENT
 
304,350 
Caterpillar 325 CF, Crawler Excavators, Construction

WHEELER MACHINERY CO.
 
304,355 
Caterpillar 325 CF, Crawler Excavators, Construction

WHEELER MACHINERY CO.
 
 
Caterpillar 325C, Raupenbagger, Bau-Und Bergbauausrüstung
- Crawler excavators
WESTERN STATES EQUIPMENT
Caterpillar 325 CF, Crawler Excavators, Construction
270,965 
Caterpillar 325 CF, Crawler Excavators, Construction
- Crawler excavators
WHEELER MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.