AVSPARE.COM
parts catalog

115-2982 CYLINDER BLOCK GP S/N 7ZR1-UP PART OF 163-5639 ENGINE AR-CORE 345B II EXCAVATOR




BASIC ENGINE

CYLINDER BLOCK GP
 
#SEBP31810020
 

115-2982: CYLINDER BLOCK GP

115-2982 CYLINDER BLOCK GP
S/N 7ZR1-UP
PART OF 163-5639 ENGINE AR-CORE
i01564719 SEBP3181
  For full view, you need register

Parts for your 345B II EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 204-3450 CY [1] CYLINDER BLOCK AS  
2. 7N-5683 [6] DOWEL  
6. 6V-3538 [2] DOWEL  
7. 1N-5999 [2] PLUG-O-RING  
8. 5P-7813 [2] SEAL-O-RING  
9. 9S-8002 [1] PLUG (7/16-20-THD)  
10. 6V-5048 [1] SEAL-O-RING  
11. 3B-0623 [3] PLUG-CUP  
12. 4G-4972 [6] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 
#SEBP31810021
 

179-9459: CYLINDER HEAD AS

179-9459 CYLINDER HEAD AS
S/N 7ZR1-UP
PART OF 148-2149 CYLINDER HEAD GP
i01336061 SEBP3181
  For full view, you need register

Parts for your 345B II EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Z [1] CYLINDER HEAD  
2. 3B-0623 [8] PLUG-CUP  
3. 179-9453 [12] INSERT-VALVE SEAT (EXHAUST)  
4. 138-2006 [12] INSERT-VALVE SEAT (INLET)  
5. 116-1102 [6] SLEEVE-INJECTOR  
6. 6V-7604 [16] PLUG-CUP  
  Z   NOT SERVICED SEPARATELY
 
#SEBP31810022
 

116-1085: CYLINDER HEAD GP

116-1085 CYLINDER HEAD GP
S/N 7ZR1-UP
PART OF 163-5639 ENGINE AR-CORE
i01144009 SEBP3181
  For full view, you need register

Parts for your 345B II EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 148-2149 CY [1] CYLINDER HEAD GP  
2. 6V-9607 M [7] BOLT (M8X1.25X120-MM)  
3. 187-3307 C [1] GASKET AS-CYLINDER HEAD  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 
#SEBP31810023
 

148-2149: CYLINDER HEAD GP

148-2149 CYLINDER HEAD GP
S/N 7ZR1-UP
PART OF 116-1085 CYLINDER HEAD GP, 20R-1464 KIT-ENGINE OVERHAUL
i01335995 SEBP3181
  For full view, you need register

Parts for your 345B II EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 179-9459 Y [1] CYLINDER HEAD AS  
2. 100-8150 [24] GUIDE-VALVE  
3. 6I-1638 [12] BASE-INJECTOR POSITIONING  
4. 2A-4429 [48] LOCK-RETAINER  
5. 133-7029 [12] VALVE-EXHAUST  
6. 7E-9578 [12] VALVE-INLET  
7. 224-4441 [24] SPRING (VALVE)  
8. 332-2152 [24] SPRING-VALVE  
9. 6I-2663 [24] ROTOCOIL AS  
    (EACH INCLUDES)
  6I-2662 [1] SHIELD  
  7C-8581 [1] ROTOCOIL AS  
  Y   SEPARATE ILLUSTRATION
 
#SEBP31810024
 

117-2766: DAMPER GP

117-2766 DAMPER GP
S/N 7ZR1-25995
PART OF 194-6646 ENGINE AR-COMPLETE
i00827118 SEBP3181
  For full view, you need register

Parts for your 345B II EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 132-3170 [1] ADAPTER  
2. 133-7097 [1] DAMPER AS  
  5M-9709 [2] PLUG-EXPANSION  
3. 136-4183 M [8] BOLT-12 POINT HEAD (M10X1.5X30-MM)  
4. 9X-2027 [8] WASHER (11X18X2-MM THK)  
  M   METRIC PART
 
#SEBP31810025
 

137-3750: DRIVE GP-FAN

137-3750 DRIVE GP-FAN
S/N DET1-UP
PART OF 162-6295, 231-4490 RADIATOR & FAN GP
ALSO AN ATTACHMENT
i01619686 SEBP3181
  For full view, you need register

Parts for your 345B II EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 137-3746 [1] SHAFT  
2. 137-3751 [1] SEAL-LIP TYPE  
3. 200-3311 C [1] HOUSING  
4. 4B-3665 [2] BALL BEARING  
5. 137-3749 [2] SPACER (45X53X10-MM THK)  
6. 6V-5590 [1] RING-RETAINING  
8. 095-7424 [1] RING-RETAINING  
  C   CHANGE FROM PREVIOUS TYPE
 
#SEBP31810026
 

116-1083: FASTENER GP-CYLINDER HEAD

116-1083 FASTENER GP-CYLINDER HEAD
S/N 7ZR1-UP
PART OF 116-5408 MOUNTING GP-VALVE MECHANISM
i00694572 SEBP3181
  For full view, you need register

Parts for your 345B II EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 175-0454 M [26] BOLT (M16X2X160-MM)  
2. 2S-5658 [26] WASHER-HARD (17X29X3-MM THK)  
  M   METRIC PART
 
#SEBP31810027
 

117-2771: FASTENER GP-DAMPER & PULLEY

117-2771 FASTENER GP-DAMPER & PULLEY
S/N 7ZR1-25995
PART OF 194-6646 ENGINE AR-COMPLETE
i00827119 SEBP3181
  For full view, you need register

Parts for your 345B II EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-0281 M [6] BOLT (M16X2X80-MM)  
2. 5P-8247 [6] WASHER-HARD (17X32X3.5-MM THK)  
    -OR-
  213-1585 [1] SPACER (10.5-MM THK)  
  M   METRIC PART
 
#SEBP31810028
 

117-2794: FASTENER GP-FLYWHEEL

117-2794 FASTENER GP-FLYWHEEL
S/N 7ZR1-25995
PART OF 194-6646 ENGINE AR-COMPLETE
i00827124 SEBP3181
  For full view, you need register

Parts for your 345B II EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-8247 [8] WASHER-HARD (17X32X3.5-MM THK)  
2. 9X-2021 M [8] BOLT-LOCKING (M16X2X45-MM)  
  M   METRIC PART
 
#SEBP31810029
 

116-5386: FLYWHEEL GP

116-5386 FLYWHEEL GP
S/N 7ZR1-7718
PART OF 194-6646 ENGINE AR-COMPLETE
i04544518 SEBP3181
  For full view, you need register

Parts for your 345B II EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 126-0173 [1] FLYWHEEL AS  
2. 4N-2514 [1] GEAR (113-TEETH)  

Information:

BASIC ENGINE
CYLINDER BLOCK GP
Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Troubleshooting
Cylinder Is Noisy
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Disassembly and Assembly
Bearing Clearance - Check
3176C and 3196 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
3176C and 3196 Engines for Caterpillar Built Machines
Cylinder Liner - Install
3176C and 3196 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
3176C and 3196 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3176C and 3196 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
3176C and 3196 Engines for Caterpillar Built Machines
Cylinder Liner - Remove
3176C and 3196 Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog 345B II :

Truck sale:

85,215 
Caterpillar 345BIIL, Construction
- Crawler Excavators
AVESCO AG
Switzerland
100,561 
Caterpillar 345BIIL, Construction
- Crawler Excavators
Parana Equipamentos S.A.
Brazil
 
Caterpillar 345BIIL, Construction
- Crawler Excavators
BERGERAT MONNOYEUR SP. Z O.O.
Poland
56,000 
Caterpillar 345BIIL, Construction
- Crawler Excavators
BUTLER MACHINERY COMPANY
 
CATERPILLAR 345BII 2003
- TRACK EXCAVATORS
WAGNER EQUIPMENT CO
United States
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.