208-3683 BUCKET GP-DITCH CLEANING S/N CFB1-UP; CFT1-UP 1219-MM (48-IN) WIDE X 0.61-CU M (0.80-CU YD) CAPACITY FOR USE WITH PIN LOCK COUPLER AN ATTACHMENT 315C

208-3683 BUCKET GP-DITCH CLEANING
S/N CFB1-UP; CFT1-UP
1219-MM (48-IN) WIDE X 0.61-CU M (0.80-CU YD) CAPACITY
FOR USE WITH PIN LOCK COUPLER
AN ATTACHMENT

i02840349 SEBP3184

2083683 BUCKET GP-DITCH CLEANING Parts scheme

For full view, you need register

Parts for your 315C EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	278-5013	[1]	BUCKET AS-DITCH CLEANING
2.	278-5022	[4]	PLATE-WEAR
3.	2C-9259	[2]	PLATE-IDENTIFICATION (CAT)
4.	278-5011	[2]	SHIM
5.	278-5012	[2]	PLATE
7.	4F-3656	[8]	BOLT-PLOW (5/8-11X2.5-IN)
8.	4K-0367	[8]	NUT-FULL (5/8-11-THD)
9.	8T-8917	[4]	BOLT (1/2-13X1.25-IN)
10.	8A-8580	[2]	EDGE-CUTTING
11.	272-6312	[8]	SHIM
12.	272-6313	[6]	SHIM

#SEBP31840581

208-3684: BUCKET GP-DITCH CLEANING

208-3684 BUCKET GP-DITCH CLEANING
S/N CFB1-UP; CFT1-UP
1524-MM (60-IN) WIDE X 0.76-CU M (1-CU YD) CAPACITY
FOR USE WITH PIN LOCK COUPLER
AN ATTACHMENT

i02840351 SEBP3184

2083684 BUCKET GP-DITCH CLEANING Parts scheme

For full view, you need register

Parts for your 315C EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	278-5027	[1]	BUCKET AS-DITCH CLEANING
1A.	278-5022	[5]	PLATE-WEAR
1B.	2C-9259	[2]	PLATE-IDENTIFICATION (CAT)
2.	272-6312	[8]	SHIM
3.	272-6313	[6]	SHIM
4.	278-5011	[2]	SHIM
5.	278-5012	[2]	PLATE
6.	4T-3009	[1]	EDGE-CUTTING
7.	2J-3506	[10]	NUT-FULL (3/4-10-THD)
8.	5J-4773	[10]	BOLT-PLOW (3/4-10X2.5-IN)
9.	8T-8917	[4]	BOLT (1/2-13X1.25-IN)

#SEBP31840582

208-3685: BUCKET GP-DITCH CLEANING

208-3685 BUCKET GP-DITCH CLEANING
S/N CFB1-UP; CFT1-UP
1829-MM (72-IN) WIDE X 1-CU M (1.3-CU YD) CAPACITY
FOR USE WITH PIN LOCK COUPLER
AN ATTACHMENT

i02840353 SEBP3184

2083685 BUCKET GP-DITCH CLEANING Parts scheme

For full view, you need register

Parts for your 315C EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	278-5032	[1]	BUCKET AS-DITCH CLEANING
1A.	278-5022	[6]	PLATE-WEAR
1B.	2C-9259	[1]	PLATE-IDENTIFICATION (CAT)
2.	272-6312	[8]	SHIM
3.	272-6313	[6]	SHIM
4.	278-5011	[2]	SHIM
5.	278-5012	[2]	PLATE
6.	4T-8068	[1]	EDGE-CUTTING
7.	3F-5108	[12]	BOLT-PLOW (5/8-11X2.25-IN)
8.	4K-0367	[12]	NUT-FULL (5/8-11-THD)
9.	8T-8917	[4]	BOLT (1/2-13X1.25-IN)

#SEBP31840583

234-4998: BUCKET GP-DITCH CLEANING

234-4998 BUCKET GP-DITCH CLEANING
S/N CFB1-UP; CFT1-UP
1524-MM (60-IN) WIDE X 0.66-CU M (0.87-CU YD) CAPACITY
AN ATTACHMENT

i02717648 SEBP3184

2344998 BUCKET GP-DITCH CLEANING Parts scheme

For full view, you need register

Parts for your 315C EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	4T-3009	[1]	EDGE-CUTTING
2.	234-9421 Y	[1]	BUCKET GP-DITCH CLEANING
3.	245-8156 Y	[1]	LINES GP-CONNECTING
4.	2J-3506	[10]	NUT-FULL (3/4-10-THD)
5.	5J-4773	[10]	BOLT-PLOW (3/4-10X2.5-IN)
	Y		SEPARATE ILLUSTRATION

#SEBP31840584

234-9421: BUCKET GP-DITCH CLEANING

234-9421 BUCKET GP-DITCH CLEANING -315-FAMILY
S/N CFB1-UP; CFT1-UP
1524-MM (60-IN) WIDE X 0.66-CU M (0.87-CU YD) CAPACITY
PART OF 234-4998 BUCKET GP-DITCH CLEANING
AN ATTACHMENT

i02717653 SEBP3184

2349421 BUCKET GP-DITCH CLEANING Parts scheme

For full view, you need register

Parts for your 315C EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	237-6331 J	[2]	CYLINDER AS-HYDRAULIC
			(EACH INCLUDES)
		[2]	BUSHING
	3B-8489	[2]	FITTING-GREASE (1/8-27 PTF)
	5D-1986	[1]	LOCKNUT (7/8-14-THD)
2.	237-6333	[1]	MOUNTING GP-BUCKET
2A.	2V-0707	[2]	BUSHING
2B.	3B-8489	[2]	FITTING-GREASE (1/8-27 PTF)
2C.	237-8258	[2]	PLATE-HINGE
2D.	282-1608	[2]	PLATE-HINGE
3.	251-2337	[1]	BAR
4.	251-2338 I	[2]	HOSE AS
5.	251-2339 I	[2]	HOSE AS
6.	282-1593	[1]	BUCKET AS-DITCH CLEANING
6A.	251-2340	[1]	EDGE-BASE
6B.	251-2342	[5]	PLATE-WEAR
6C.	8G-0452	[2]	LUG (3/8-16-THD)
6D.	2C-9259	[2]	PLATE-IDENTIFICATION (CAT)
7.	282-1623	[1]	PIN AS
8.	282-1626	[2]	PIN AS
9.	282-1630	[2]	PIN AS
10.	282-1632	[4]	SHIM (1.5-MM THK)
11.	0S-1588	[4]	BOLT (3/8-16X1.25-IN)
12.	0S-1594	[4]	BOLT (3/8-16X1-IN)
13.	2R-6806	[4]	CONNECTOR
14.	3J-1907	[6]	SEAL-O-RING
15.	3K-6060	[2]	LOCKNUT (3/8-16-THD)
16.	5M-2894	[12]	WASHER-HARD (10.2X18.5X2.5-MM THK)
17.	6V-8636	[2]	CONNECTOR
18.	7D-8793	[4]	ELBOW-FLARED
19.	8S-9191	[2]	BOLT (3/8-16X4-IN)

			AVAILABLE REPAIR KIT(S):
	239-8062 J	[1]	KIT-SEAL (BUCKET CYLINDER)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	J		KIT MARKED J SERVICES PART(S) MARKED J

#SEBP31840585

456-2089: BUCKET GP-DITCH CLEANING

456-2089 BUCKET GP-DITCH CLEANING
S/N CFB1-UP; CFT1-UP
1500-MM (60-IN) WIDE X 0.93-CU M (1.22-CU YD) CAPACITY
PART OF 456-2087 BUCKET AR-DITCH CLEANING
AN ATTACHMENT

i05664433 SEBP3184

4562089 BUCKET GP-DITCH CLEANING Parts scheme

For full view, you need register

Parts for your 315C EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	312-5694	[1]	SETSCREW (1/4-20X0.25-IN)
2.	456-2091	[1]	BUCKET AS-DITCH CLEANING (316-FAMILY)
3.	2C-9259	[1]	PLATE-IDENTIFICATION (CAT)
4.	442-8289	[2]	PLATE-SIDE BAR
5.	442-8290	[2]	PLATE (CORNER)
6.	442-8278	[1]	EDGE
7.	456-2093	[1]	PLATE AS-HINGE

#SEBP31840586

208-3677: BUCKET GP-HEAVY DUTY

208-3677 BUCKET GP-HEAVY DUTY
S/N CFB1-UP; CFT1-UP
610-MM (24-IN) WIDE X 0.4-CU M (0.5-CU YD) CAPACITY. J-300 ADAPTERS, QTY OF 4
FOR USE WITH PIN LOCK COUPLER
AN ATTACHMENT

i02840323 SEBP3184

2083677 BUCKET GP-HEAVY DUTY Parts scheme

For full view, you need register

Parts for your 315C EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	278-5038	[1]	BUCKET AS-HEAVY DUTY
2.		[1]	EDGE AS
2A.	8E-9490	[4]	ADAPTER-TIP (J-300, 2-STRAP)
2B.	8P-9770	[1]	PLATE
3.	278-5044	[2]	PLATE-WEAR
4.	278-5042	[5]	PLATE-WEAR
5.	278-5048	[2]	PLATE-WEAR
6.	278-5043	[1]	PLATE-WEAR
7.	2C-9259	[2]	PLATE-IDENTIFICATION (CAT)
8.	3W-8239	[1]	SLEEVE-WEAR
9.	8T-8917	[4]	BOLT (1/2-13X1.25-IN)
10.	9J-3167 Y	[4]	TIP GP-LONG (J-300)
11.	272-6312	[8]	SHIM
12.	272-6313	[6]	SHIM
13.	278-5011	[2]	SHIM
14.	278-5012	[2]	PLATE
	Y		SEPARATE ILLUSTRATION

#SEBP31840587

208-3678: BUCKET GP-HEAVY DUTY

208-3678 BUCKET GP-HEAVY DUTY
S/N CFB1-UP; CFT1-UP
762-MM (30-IN) WIDE X 0.5-CU M (0.7-CU YD) CAPACITY. J-300 ADAPTERS, QTY OF 4
FOR USE WITH PIN LOCK COUPLER
AN ATTACHMENT

i02840328 SEBP3184

2083678 BUCKET GP-HEAVY DUTY Parts scheme

For full view, you need register

Parts for your 315C EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	278-5051	[1]	BUCKET AS-HEAVY DUTY
2.	245-7579	[1]	EDGE AS
2A.	8E-9490	[4]	ADAPTER-TIP (J-300, 2-STRAP)
2B.	8P-9770	[1]	PLATE
3.	278-5044	[2]	PLATE-WEAR
4.	278-5055	[5]	PLATE-WEAR
5.	278-5056	[1]	PLATE-WEAR
6.	278-5048	[2]	PLATE-WEAR
7.	3W-8239	[1]	SLEEVE-WEAR
8.	2C-9259	[2]	PLATE-IDENTIFICATION (CAT)
9.	9J-3167 Y	[4]	TIP GP-LONG (J-300)
10.	272-6312	[8]	SHIM
11.	272-6313	[6]	SHIM
12.	278-5011	[2]	SHIM
13.	278-5012	[2]	PLATE
14.	8T-8917	[4]	BOLT (1/2-13X1.25-IN)
	Y		SEPARATE ILLUSTRATION

#SEBP31840588

208-3679: BUCKET GP-HEAVY DUTY

208-3679 BUCKET GP-HEAVY DUTY
S/N CFB1-UP; CFT1-UP
914-MM (36-IN) WIDE X 0.7-CU M (0.9-CU YD) CAPACITY. J-300 ADAPTERS, QTY OF 5
FOR USE WITH PIN LOCK COUPLER
AN ATTACHMENT

i02840327 SEBP3184

2083679 BUCKET GP-HEAVY DUTY Parts scheme

For full view, you need register

Parts for your 315C EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	278-5062	[1]	BUCKET AS-HEAVY DUTY
2.	245-7580	[1]	EDGE AS
2A.	8E-9490	[5]	ADAPTER-TIP (J-300, 2-STRAP)
2B.	8P-9770	[1]	PLATE
3.	278-5067	[5]	PLATE-WEAR
4.	278-5068	[1]	PLATE-WEAR
5.	278-5069	[1]	PLATE-WEAR (RH)
6.	278-5070	[1]	PLATE-WEAR (LH)
7.	278-5048	[2]	PLATE-WEAR
8.	2C-9259	[2]	PLATE-IDENTIFICATION (CAT)
9.	3W-8239	[1]	SLEEVE-WEAR
10.	9J-3167 Y	[5]	TIP GP-LONG (J-300)
11.	272-6312	[8]	SHIM
12.	272-6313	[6]	SHIM
13.	278-5011	[2]	SHIM
14.	278-5012	[2]	PLATE
15.	8T-8917	[4]	BOLT (1/2-13X1.25-IN)
	Y		SEPARATE ILLUSTRATION

#SEBP31840589

208-3680: BUCKET GP-HEAVY DUTY

208-3680 BUCKET GP-HEAVY DUTY
S/N CFB1-UP; CFT1-UP
1219-MM (48-IN) WIDE X 0.92-CU M (1.2-CU YD) CAPACITY. J-300 ADAPTERS, QTY OF 6
FOR USE WITH PIN LOCK COUPLER
AN ATTACHMENT

i02840346 SEBP3184

2083680 BUCKET GP-HEAVY DUTY Parts scheme

For full view, you need register

Parts for your 315C EXCAVATOR: