261-0378 SWIVEL GP-ELECTRIC S/N BCZ963-2000 PART OF 188-4954 WIRING GP-UNDERCARRIAGE/SWIVEL AN ATTACHMENT M318C

261-0378: SWIVEL GP-ELECTRIC

261-0378 SWIVEL GP-ELECTRIC
S/N BCZ963-2000
PART OF 188-4954 WIRING GP-UNDERCARRIAGE/SWIVEL
AN ATTACHMENT

Parts for your M318C WHEELED EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	261-1936	[1]	COVER
2.	201-8225	[5]	BRACKET AS
3.	195-9770	[1]	SEAL-O-RING
4.	242-8819	[1]	PLUG AS
5.	5C-8312 M	[3]	NUT (M4X0.7-THD)
6.	4F-2318	[3]	LOCKWASHER
7.	129-3174 M	[4]	BOLT-SOCKET HEAD (M4X0.7X60-MM)
8.	096-6166	[4]	WASHER-HARD (4.5X9X1-MM THK)
9.	5C-2874 M	[2]	NUT (M5X0.8-THD)
10.	5C-2891	[2]	WASHER
11.	186-3736	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
12.	186-3735	[5]	PIN-CONNECTOR (16-GA TO 18-GA)
13.	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
14.	8T-8737	[1]	PLUG-SEAL
	M		METRIC PART

187-3799: WIRING GP-CAB

WIRING GP-CAB

187-3799 WIRING GP-CAB
S/N BCZ1-567; BCZ569-573; BCZ578-578; BCZ580-580; BCZ587-587; BCZ606-606
PART OF 187-3800 CAB AR, 188-4959 CAB GP
ALSO AN ATTACHMENT

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6C-3431	[1]	ANTENNA
2.	9W-1494	[1]	KIT-SERVICE METER (24-VOLT)
			(INCLUDES METER & FILM)
3.	8C-6354	[1]	CAP-RECEPTACLE (ET CONNECTOR)
4.	109-2353	[11]	HOUSING
5.	109-2354	[4]	HOUSING
6.	109-2356	[11]	PLUG
7.	120-5967	[1]	SOCKET-WIRING
8.	167-3593	[1]	STRAP
9.	176-2002	[1]	CAP
10.	190-8664	[1]	SWITCH GP-LIMIT (WINDOW LOWER LIMIT)
	7Y-3950	[2]	TERMINAL-BLADE (14-GA TO 20-GA)
	7Y-3953	[1]	CONNECTOR-RECEPTACLE
11.	193-9056	[1]	SWITCH AS-ROCKER (HAZARD WARNING LIGHTS)
	111-7899	[1]	GASKET
12.	193-9057	[1]	SWITCH AS-ROCKER (HEADLIGHT)
	111-7899	[1]	GASKET
13.	193-9058	[1]	SWITCH AS-ROCKER (FRONT FLOOD LAMP)
	111-7899	[1]	GASKET
14.	232-5325	[1]	HARNESS AS-CAB
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[4]	KIT-CONNECTING PLUG (8-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(EACH CONNECTING PLUG KIT INCLUDES PLUG AS & WEDGE)
15.	193-9065	[1]	SWITCH AS-ROCKER (WARNING BEACON)
	111-7899	[1]	GASKET
16.	195-7697	[1]	PLATE
17.	201-4013	[1]	HARNESS AS-CAB (SERVICE CONNECTOR)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
18.	217-9535 Y	[1]	ELECTRONICS GP-MACHINE (SOFT SWITCH PANEL)
19.	226-5444	[1]	BRACKET
20.	096-0061 B	[5]	STRAP-CABLE
21.	096-0192	[1]	LOCKWASHER (EXTERNAL TOOTH)
22.	120-0090	[4]	WASHER (3.2X7X0.5-MM THK)
23.	120-9027 M	[4]	SCREW-PAN HEAD (M3X0.5X16-MM)
24.	3C-6969 M	[4]	NUT (M3X0.5-THD)
25.	3F-9556	[1]	LOCKWASHER
26.	5C-7261 M	[1]	NUT (M8X1.25-THD)
27.	5P-4116	[2]	WASHER-HARD (8.8X20.5X2-MM THK)
28.	7X-0575	[1]	WASHER-HARD (10.2X22.5X5-MM THK)
29.	8T-0287 M	[1]	BOLT (M5X0.8X10-MM)
30.	8T-3016	[1]	WASHER (5.3X10X1-MM THK)
31.	8U-7803 M	[4]	SCREW
32.	9W-0335	[1]	LIGHTER AS-CIGAR (24-VOLT)
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

187-3799: WIRING GP-CAB

WIRING GP-CAB

187-3799 WIRING GP-CAB
S/N BCZ568-568; BCZ574-577; BCZ579-579; BCZ581-586; BCZ588-605; BCZ607-2000
PART OF 187-3800 CAB AR, 188-4959 CAB GP
ALSO AN ATTACHMENT

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9W-1494	[1]	KIT-SERVICE METER (24-VOLT)
			(INCLUDES METER, FILM, CABLE & WIRE ASSEMBLIES)
2.	8C-6354	[1]	CAP-RECEPTACLE (ET CONNECTOR)
3.	109-2353	[11]	HOUSING
4.	109-2354	[4]	HOUSING
5.	109-2356 C	[12]	PLUG
6.	167-3593	[1]	STRAP
7.	176-2002	[1]	CAP
8.	190-8664	[1]	SWITCH GP-LIMIT (WINDOW LOWER LIMIT)
	7Y-3950	[2]	TERMINAL-BLADE (14-GA TO 20-GA)
	7Y-3953	[1]	CONNECTOR-RECEPTACLE
9.	193-9056	[1]	SWITCH AS-ROCKER (HAZARD WARNING LIGHTS)
	111-7899	[1]	GASKET
10.	193-9057	[1]	SWITCH AS-ROCKER (HEADLIGHT)
	111-7899	[1]	GASKET
11.	193-9058	[1]	SWITCH AS-ROCKER (FLOOD LAMP, FRONT)
	111-7899	[1]	GASKET
12.	195-7697	[1]	PLATE
13.	201-4013	[1]	HARNESS AS-CAB (SERVICE CONNECTOR)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[3]	PLUG-SEAL
14.	226-5444	[1]	BRACKET
15.	232-5325	[1]	HARNESS AS-CAB
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	8L-8413	[24]	STRAP-CABLE (WHITE)
	8T-8730	[25]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[5]	PLUG-SEAL
	9W-0844	[3]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	9X-3402	[17]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[4]	KIT-CONNECTING PLUG (8-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
16.	217-9535 CY	[1]	ELECTRONICS GP-MACHINE (SOFT SWITCH PANEL)
17.	096-0061	[5]	STRAP-CABLE
18.	120-0090	[4]	WASHER (3.2X7X0.5-MM THK)
19.	120-9027 M	[4]	SCREW-PAN HEAD (M3X0.5X16-MM)
20.	3C-6969 M	[4]	NUT (M3X0.5-THD)
21.	3F-9556	[1]	LOCKWASHER
22.	5C-7261 M	[1]	NUT (M8X1.25-THD)
23.	5P-4116	[2]	WASHER-HARD (8.8X20.5X2-MM THK)
24.	8T-0287 M	[1]	BOLT (M5X0.8X10-MM)
25.	8T-3016	[1]	WASHER (5.3X10X1-MM THK)
26.	8U-7803 M	[4]	SCREW
27.	9W-0335	[1]	LIGHTER AS-CIGAR (24-VOLT)
28.	240-8786	[1]	ANTENNA AS
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

221-9037: WIRING GP-CAB

WIRING GP-CAB

221-9037 WIRING GP-CAB -FRONT WINDOW, 1-PIECE
S/N BCZ1-2000
PART OF 219-8500 CAB AR
AN ATTACHMENT

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	215-2913	[1]	GROMMET
2.	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(4CM)
2A.	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(4CM)
	E		ORDER BY THE CENTIMETER

186-0486: WIRING GP-CHASSIS

WIRING GP-CHASSIS

186-0486 WIRING GP-CHASSIS
S/N BCZ1-2000
PART OF 186-0468 CHASSIS AR

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5W-6315	[1]	FITTING
2.	104-6692	[2]	RECEPTACLE AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[2]	PLUG-SEAL
3.	120-5967	[1]	SOCKET-WIRING
4.	127-0833	[1]	TANK AS-WINDOW WASHER
	7T-8891	[1]	PUMP AS-WASHER
	8E-8292	[1]	CAP-VENTED (WINDOW WASHER)
	8E-8293	[1]	GROMMET
5.	132-1805	[1]	STRAP AS-GROUND
6.	137-4195	[1]	CAP
7.	147-1380	[1]	SWITCH AS-FOOT (HORN)
8.	194-3592	[1]	SWITCH AS (HORN, LIGHTS, WIPER)
9.	232-5326	[1]	HARNESS AS-CHASSIS
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	102-8801	[2]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[5]	KIT-CONNECTING PLUG (8-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[6]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[2]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[2]	KIT-CONNECTING PLUG (6-PIN)
			(EACH CONNECTING PLUG KIT INCLUDES PLUG AS & WEDGE)
10.	195-7873	[1]	BRACKET
11.	207-5153	[1]	RECEPTACLE AS
12.	214-0862	[1]	RECEPTACLE AS
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[6]	PLUG-SEAL
13.	096-0061 B	[30]	STRAP-CABLE
14.	099-2374 M	[2]	BOLT-SOCKET HEAD (M5X0.8X12-MM)
15.	129-3178 M	[1]	LOCKNUT (M6X1-THD)
16.	159-3050 M	[1]	BOLT-SOCKET HEAD (M10X1.5X20-MM)
17.	3F-9556	[3]	LOCKWASHER
18.	4P-7429	[1]	CLIP (LADDER)
19.	4P-8134	[1]	CLIP (LADDER)
20.	5C-7261 M	[3]	NUT (M8X1.25-THD)
21.	5P-4116	[6]	WASHER-HARD (8.8X20.5X2-MM THK)
22.	6V-4298 M	[2]	BOLT (M5X0.8X16-MM)
23.	8T-3016	[2]	WASHER (5.3X10X1-MM THK)
24.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
25.	9X-8256	[1]	WASHER (6.6X12X2-MM THK)
26.	144-0195 E		HOSE (310CM)
26A.	144-0195 E		HOSE (10CM)
27.	207-5141 E		SEAL (32.5CM)
27A.	207-5141 E		SEAL (25CM)
28.	8T-4189 M	[2]	BOLT (M8X1.25X20-MM)
29.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

188-4968: WIRING GP-CHASSIS

WIRING GP-CHASSIS

188-4968 WIRING GP-CHASSIS
S/N BCZ1-2000
ELECTRONIC
PART OF 188-4960 RISER AR-CAB
AN ATTACHMENT

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5W-6315	[1]	FITTING
2.	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
3.	8T-8737	[4]	PLUG-SEAL
4.	127-0833	[1]	TANK AS-WINDOW WASHER
	7T-8891	[1]	PUMP AS-WASHER
	8E-8292	[1]	CAP-VENTED (WINDOW WASHER)
	8E-8293	[1]	GROMMET
5.	132-1805	[2]	STRAP AS-GROUND
6.	137-4195	[1]	CAP
7.	147-1380	[1]	SWITCH AS-FOOT (HORN)
	186-3735	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
8.	194-3592	[1]	SWITCH AS (HORN, LIGHTS, WIPER)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[14]	PIN-CONNECTOR (16-GA TO 18-GA)
9.	195-7873	[1]	BRACKET
10.	202-1135	[1]	HARNESS AS-CHASSIS
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	102-8801	[2]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[5]	KIT-CONNECTING PLUG (8-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[6]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[2]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[2]	KIT-CONNECTING PLUG (6-PIN)
			(EACH CONNECTING PLUG INCLUDES PLUG AS & WEDGE)
11.	207-5153	[1]	RECEPTACLE AS
12.	214-0862	[1]	RECEPTACLE AS
	8T-8737	[6]	PLUG-SEAL
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
13.	096-0061 B	[41]	STRAP-CABLE
14.	099-2374 M	[2]	BOLT-SOCKET HEAD (M5X0.8X12-MM)
15.	129-3178 M	[1]	LOCKNUT (M6X1-THD)
16.	159-3050 M	[1]	BOLT-SOCKET HEAD (M10X1.5X20-MM)
17.	3F-9556	[5]	LOCKWASHER
18.	4P-7429	[1]	CLIP (LADDER)
19.	4P-8134	[1]	CLIP (LADDER)
20.	5C-7261 M	[5]	NUT (M8X1.25-THD)
21.	5P-4116	[10]	WASHER-HARD (8.8X20.5X2-MM THK)
22.	6V-4298 M	[2]	BOLT (M5X0.8X16-MM)
23.	8T-3016	[4]	WASHER (5.3X10X1-MM THK)
24.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
25.	9X-8256	[1]	WASHER (6.6X12X2-MM THK)
26.	144-0195 E		HOSE (460-CM)
27.	207-5141 E		SEAL (33-CM)
28.	217-3403 E		SEAL (17-CM)
29.	120-5967	[1]	SOCKET-WIRING
30.	144-0195 E		HOSE (10-CM)
31.	207-5141 E		SEAL (25-CM)
32.	207-5141 E		SEAL (25-CM)
33.	8T-4189 M	[2]	BOLT (M8X1.25X20-MM)
34.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

202-1136: WIRING GP-CHASSIS

WIRING GP-CHASSIS

202-1136 WIRING GP-CHASSIS
S/N BCZ1-839
ELECTRONIC
PART OF 188-4960 RISER AR-CAB
AN ATTACHMENT

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	102-8802	[3]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
2.	137-4195	[1]	CAP
3.	202-1137	[1]	HARNESS AS-CHASSIS (ELECTRONIC, SWITCHES, SENSORS)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2260	[8]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[23]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[2]	KIT-CONNECTING PLUG (6-PIN)
			(EACH CONNECTING PLUG KIT INCLUDES PLUG AS & WEDGE)
4.	210-0396	[1]	PLUG AS-CODE (MONITOR)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	5P-5623 BD	[1]	WIRE-ELECTRICAL (16-GA, BLACK)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
5.	214-0861	[2]	RECEPTACLE GP-AUXILIARY START
			(EACH INCLUDES)
	8T-8737	[3]	PLUG-SEAL
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
6.	214-0862	[2]	RECEPTACLE AS
			(EACH INCLUDES)
	8T-8737	[6]	PLUG-SEAL
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
7.	214-0863	[1]	RECEPTACLE GP-AUXILIARY START
	8T-8737	[8]	PLUG-SEAL
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
8.	219-5762	[1]	HARNESS AS-SENSOR
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
9.	096-0192	[1]	LOCKWASHER (EXTERNAL TOOTH)
10.	129-3178 M	[1]	LOCKNUT (M6X1-THD)
11.	134-2540	[1]	RECEPTACLE AS-CONNECTOR
12.	4P-8134	[3]	CLIP (LADDER)
13.	5C-2874 M	[1]	NUT (M5X0.8-THD)
14.	6D-4244	[1]	CLIP (LOOP)
15.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
16.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
17.	9X-8256	[1]	WASHER (6.6X12X2-MM THK)

	096-0061 BF	[15]	STRAP-CABLE
	B		USE AS REQUIRED
	D		ORDER BY THE METER
	F		NOT SHOWN
	M		METRIC PART

202-1136: WIRING GP-CHASSIS

WIRING GP-CHASSIS

202-1136 WIRING GP-CHASSIS
S/N BCZ840-1017
ELECTRONIC
PART OF 188-4960 RISER AR-CAB
AN ATTACHMENT

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	102-8802	[3]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
2.	137-4195	[1]	CAP
3.	202-1137	[1]	HARNESS AS-CHASSIS (ELECTRONIC, SWITCHES, SENSORS)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2260	[8]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[23]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[2]	KIT-CONNECTING PLUG (6-PIN)
			(EACH CONNECTING PLUG KIT INCLUDES PLUG AS & WEDGE)
4.	210-0396	[1]	PLUG AS-CODE (MONITOR)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	5P-5623 BD	[1]	WIRE-ELECTRICAL (16-GA, BLACK)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
5.	214-0861	[2]	RECEPTACLE GP-AUXILIARY START
			(EACH INCLUDES)
	8T-8737	[3]	PLUG-SEAL
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
6.	214-0862	[2]	RECEPTACLE AS
			(EACH INCLUDES)
	8T-8737	[6]	PLUG-SEAL
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
7.	214-0863	[1]	RECEPTACLE GP-AUXILIARY START
	8T-8737	[8]	PLUG-SEAL
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
8.	219-5762	[1]	HARNESS AS-SENSOR
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
9.	096-0192	[1]	LOCKWASHER (EXTERNAL TOOTH)
10.	129-3178 M	[1]	LOCKNUT (M6X1-THD)
11.	134-2540	[1]	RECEPTACLE AS-CONNECTOR
12.	4P-8134	[3]	CLIP (LADDER)
13.	5C-2874 M	[1]	NUT (M5X0.8-THD)
14.	6D-4244	[1]	CLIP (LOOP)
15.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
16.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
17.	9X-8256	[1]	WASHER (6.6X12X2-MM THK)

	096-0061 BF	[15]	STRAP-CABLE
	B		USE AS REQUIRED
	D		ORDER BY THE METER
	F		NOT SHOWN
	M		METRIC PART

202-1136: WIRING GP-CHASSIS

WIRING GP-CHASSIS

202-1136 WIRING GP-CHASSIS
S/N BCZ1018-2000
ELECTRONIC
PART OF 188-4960 RISER AR-CAB
AN ATTACHMENT

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	102-8802	[3]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
2.	137-4195	[1]	CAP
3.	163-6758 C	[1]	WIRE AS
4.	202-1137	[1]	HARNESS AS-CHASSIS (ELECTRONIC, SWITCHES, SENSORS)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2260	[8]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[23]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[2]	KIT-CONNECTING PLUG (6-PIN)
			(EACH CONNECTING PLUG KIT INCLUDES PLUG AS & WEDGE)
5.	210-0396	[1]	PLUG AS-CODE (MONITOR)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	5P-5623 BD	[1]	WIRE-ELECTRICAL (16-GA, BLACK)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
6.	214-0861	[2]	RECEPTACLE GP-AUXILIARY START
			(EACH INCLUDES)
	8T-8737	[3]	PLUG-SEAL
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
7.	214-0862	[2]	RECEPTACLE AS
			(EACH INCLUDES)
	8T-8737	[6]	PLUG-SEAL
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
8.	214-0863	[1]	RECEPTACLE GP-AUXILIARY START
	8T-8737	[8]	PLUG-SEAL
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
9.	219-5762	[1]	HARNESS AS-SENSOR
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
10.	096-0192	[1]	LOCKWASHER (EXTERNAL TOOTH)
11.	129-3178 M	[1]	LOCKNUT (M6X1-THD)
12.	134-2540	[1]	RECEPTACLE AS-CONNECTOR
13.	4P-8134	[3]	CLIP (LADDER)
14.	5C-2874 M	[1]	NUT (M5X0.8-THD)
15.	6D-4244	[1]	CLIP (LOOP)
16.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
17.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
18.	9X-8256	[1]	WASHER (6.6X12X2-MM THK)

	096-0061 BF	[15]	STRAP-CABLE
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	F		NOT SHOWN
	M		METRIC PART

209-8865: WIRING GP-CHASSIS

WIRING GP-CHASSIS

209-8865 WIRING GP-CHASSIS
S/N BCZ1-561; BCZ564-564; BCZ566-567; BCZ569-569; BCZ571-571; BCZ573-580; BCZ582-582; BCZ584-584
PART OF 186-0468 CHASSIS AR

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8U-6128	[1]	CAP-PROTECTION
2.	104-6692	[2]	RECEPTACLE AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE.)
3.	137-4195	[1]	CAP
4.	207-7170	[1]	BRACKET
5.	209-8867	[1]	HARNESS AS-CHASSIS
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2260	[8]	KIT-CONNECTING PLUG (3-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2270	[23]	KIT-CONNECTING PLUG (2-PIN)
			(EACH CONNECTING PLUG KIT INCLUDES PLUG AS & WEDGE)
6.	210-0396	[1]	PLUG AS-CODE (MONITOR)
7.	214-0861	[2]	RECEPTACLE GP-AUXILIARY START
			(EACH INCLUDES)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE.)
8.	214-0862	[2]	RECEPTACLE AS
			(EACH INCLUDES)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECPTACLE AS & WEDGE.)
9.	214-0863	[1]	RECEPTACLE GP-AUXILIARY START
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE.)
10.	219-5762	[1]	HARNESS AS-SENSOR
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE.)
11.	096-0192	[1]	LOCKWASHER (EXTERNAL TOOTH)
12.	129-3178 M	[1]	LOCKNUT (M6X1-THD)
13.	134-2540	[1]	RECEPTACLE AS-CONNECTOR
14.	4P-8134	[3]	CLIP (LADDER)
15.	5C-2874 M	[1]	NUT (M5X0.8-THD)
16.	6D-4244	[2]	CLIP (LOOP)
17.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
18.	8T-4133 M	[1]	NUT (M10X1.5-THD)
19.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
20.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
21.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
22.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
23.	9X-8256	[1]	WASHER (6.6X12X2-MM THK)

	096-0061 BF	[10]	STRAP-CABLE
	B		USE AS REQUIRED
	F		NOT SHOWN
	M		METRIC PART

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Battery - Recycle
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers

Service Hour Meter
M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers

Battery Disconnect Switch
M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers

Power Receptacle
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers

Window Wiper and Washer Control
M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers

Engine Starting with Jump Start Cables - If Equipped
M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers

Quick Coupler Control - If Equipped
M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers

Battery or Battery Cable - Inspect/Replace
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers

Engine Starting with Jump Start Cables
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers

Fuses - Replace
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers

Engine Start Switch
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers

Automatic Lubrication System Control - If Equipped
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers

Automatic Lubrication System Control - If Equipped
M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers

Joystick Steering - If Equipped
M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers

Fuses - Replace
M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Improving Radio Performance{1408, 7338}
Improving Radio Performance{1408, 7338}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

AMPSEAL 16 ConnectorSystem{7553}
AMPSEAL 16 ConnectorSystem{7553}

Field Installation of Medium Pressure Valve Group with Joystick Steering{1408, 5057, 5059, 5705}
Field Installation of Medium Pressure Valve Group with Joystick Steering{1408, 5057, 5059, 5705}

Installation Procedure for the Control Box for the 12.5 kW Generator{1404, 1408, 4450, 7426, 7451}
Installation Procedure for the Control Box for the 12.5 kW Generator{1404, 1408, 4450, 7426, 7451}

Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REPLACING THE ACTIVE MEDIUM PRESSURE FUNCTION SELECTOR SWITCH ON CERTAIN M313C, M315C, M316C, M318C, M322C WHEELED EXCAVATORS AND M322C MATERIAL HANDLERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ACTIVE MEDIUM PRESSURE FUNCTION SELECTOR SWITCH ON CERTAIN M313C, M315C, M316C, M318C, M322C WHEELED EXCAVATORS AND M322C MATERIAL HANDLERS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

C Series Wheeled Excavator Wire Harness is Wearing
C Series Wheeled Excavator Wire Harness is Wearing

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Service Letter-China

PRODUCT SUPPORT PROGRAM FOR REPLACING THE ACTIVE MEDIUM PRESSURE FUNCTION SELECTOR SWITCH ON CERTAIN M313C, M315C, M316C, M318C, M322C WHEELED EXCAVATORS AND M322C MATERIAL HANDLERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ACTIVE MEDIUM PRESSURE FUNCTION SELECTOR SWITCH ON CERTAIN M313C, M315C, M316C, M318C, M322C WHEELED EXCAVATORS AND M322C MATERIAL HANDLERS

Service Letter-Asia

Systems Operation

Relays
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

Switches
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

Monitoring System
M318C and M322C Excavators Magnet Controller

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Letter-APD

PRODUCT SUPPORT PROGRAM FOR REPLACING THE ACTIVE MEDIUM PRESSURE FUNCTION SELECTOR SWITCH ON CERTAIN M313C, M315C, M316C, M318C, M322C WHEELED EXCAVATORS AND M322C MATERIAL HANDLERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ACTIVE MEDIUM PRESSURE FUNCTION SELECTOR SWITCH ON CERTAIN M313C, M315C, M316C, M318C, M322C WHEELED EXCAVATORS AND M322C MATERIAL HANDLERS

Testing and Adjusting

System Schematic
Machine Security System

Electric Starting System - Test
3056E Engines for Caterpillar Built Machines

Wiring Harness (Open Circuit) - Test
Product Link 151/201

Electrical Connector - Inspect
Product Link 151/201

Wiring Harness (Short Circuit) - Test
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

Wiring Harness (Short Circuit) - Test
Product Link - PL102C

Wiring Harness (Open Circuit) - Test
Product Link - PL102C

Electrical Connector - Inspect
Product Link - PL102C

Electrical Connector - Inspect
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

Wiring Harness (Open Circuit) - Test
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

Electrical Connector - Inspect
Machine Security System

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

System Schematic
MSS3s Machine Security System

Troubleshooting

Electrical Component and Connector Locations
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

MID 039 - CID 0444 - FMI 03
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

MID 039 - CID 0444 - FMI 05
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

MID 039 - CID 0444 - FMI 06
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

MID 039 - CID 1623 - FMI 03
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

MID 039 - CID 1623 - FMI 05
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

MID 039 - CID 1623 - FMI 06
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

MID 039 - CID 1670 - FMI 04
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

MID 039 - CID 1670 - FMI 05
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

MID 122 - CID 0269 - FMI 03
Product Link 151/201

MID 122 - CID 0269 - FMI 04
Product Link 151/201

Electrical Component and Connector Locations
Machine Security System

MID 039 - CID 2198 - FMI 02
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

Sensors and Electrical Connectors
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines

Engine Wiring Information
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines

CID 1894 FMI 02
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines

Electrical Connectors - Inspect
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines

Electrical Power Supply Circuit - Test
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

Cat Data Link - Test
MSS3s Machine Security System

Wiring Harness (Open Circuit) - Test
MSS3s Machine Security System

Wiring Harness (Short Circuit) - Test
MSS3s Machine Security System

Connector Locations
MSS3s Machine Security System

Connector Contact Description
MSS3s Machine Security System

Electrical Connector - Inspect
MSS3s Machine Security System

Disassembly and Assembly

Temperature Sensor (Ambient Air) - Remove and Install
M318C and M322C Excavators Machine Systems

Temperature Sensor (Cab Air) - Remove and Install
M318C Excavator Machine Systems

Temperature Sensor (Mixed Cab Air) - Remove and Install
M318C Excavator Machine Systems

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Special Instruction, REHS1615, "Installing a New Wiring Harness will Improve Radio Performance" Is Available {1408, 7338}
2003/03/03

Special Instruction, REHS1615, "Installing a New Wiring Harness will Improve Radio Performance" Has Been Revised {1408, 7338}
2003/09/15

A Control Box and a Control Unit are Available for the Adjustment of the Magnetic Drop Time {1404, 1408, 4450, 4453, 7426}
2006/05/15

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Improved Solenoid Valves for Auxiliary High Pressure are Now Used on Series C and Series D Wheeled Excavators {1408, 5051, 5064, 5479}
2008/05/12

New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}
2011/07/14

An Improved Switch for the Medium Pressure Function is Now Available for Certain Models of M300C Series Wheeled Excavators {1408}
2009/01/19

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Caterpillar Parts SIS Catalog M318C :

Truck sale:

19,000 USD

Caterpillar M318C, Construction
- wheel excavator
H.O. PENN MACHINERY CO., INC.

64,763

Caterpillar M318C, Construction
- wheel excavator
BERGERAT MONNOYEUR SP. Z O.O.
Poland

36,800

Caterpillar M318C, Construction
- wheel excavator
KELLY TRACTOR CO.

CATERPILLAR M318C 2005
- WHEEL EXCAVATORS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus

$64,442 USD

CATERPILLAR M318C 2003
- WHEEL EXCAVATORS
BERGERAT MONNOYEUR POLAND
K. Kolumba 15 - Komorniki -