AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

191-0885 ROTATING GP-MOTOR S/N BCZ1-2000 PART OF 190-8122 ROTATING GP-MOTOR M318C WHEELED EXCAVATOR


HYDRAULIC SYSTEM
MOTOR GP
IMPLEMENTS
STABILIZER GP
HYDRAULIC SYSTEM
STEERING GP
SWIVEL GP

WHEELED EXCAVATOR M318C WHEELED EXCAVATOR BCZ
 M318C Excavator BCZ00001-02000 (MACHINE) POWERED BY 3056 Engine SEBP3185 M318C BCZ   (2001)

HYDRAULIC SYSTEM

MOTOR GP
MOTOR GP-TRAVEL
211-0062 MOTOR GP-TRAVEL
ROTATING GP-MOTOR
190-8122 ROTATING GP-MOTOR
ROTATING GP-MOTOR
191-0885 ROTATING GP-MOTOR
SHAFT GP-HYDRAULIC MOTOR
191-0887 SHAFT GP-HYDRAULIC MOTOR
VALVE GP-MOTOR CONTROL
190-8653 VALVE GP-MOTOR CONTROL
VALVE GP-MOTOR CONTROL
190-8655 VALVE GP-MOTOR CONTROL
 

#SEBP31850410
 

191-0885: ROTATING GP-MOTOR

191-0885 ROTATING GP-MOTOR
S/N BCZ1-2000
PART OF 190-8122 ROTATING GP-MOTOR
i01309669 SEBP3185
1910885 ROTATING GP-MOTOR Parts scheme
  For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 191-1393 [1] BARREL-CYLINDER  
2. 191-1394 [1] PLATE-CONTROL  
3. 191-1395 [1] PIN  
4. 191-1396 [7] PISTON AS  
    (EACH INCLUDES)
  191-1398 [2] RING-PISTON  
5. 124-9855 B [1] SHIM (4.5-MM THK)  
6. 124-9856 B [1] SHIM (4.6-MM THK)  
7. 124-9857 B [1] SHIM (4.7-MM THK)  
8. 124-9858 B [1] SHIM (4.8-MM THK)  
9. 124-9859 B [1] SHIM (4.9-MM THK)  
10. 124-9860 B [1] SHIM (5-MM THK)  
11. 124-9861 [1] SPRING  
12. 191-1397 [1] PLATE-RETAINING  
13. 252-0706 M [7] SCREW-PAN HEAD (M8X1.25X20-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP31850411
 

191-0887: SHAFT GP-HYDRAULIC MOTOR

191-0887 SHAFT GP-HYDRAULIC MOTOR
S/N BCZ1-2000
PART OF 190-8122 ROTATING GP-MOTOR
i01309708 SEBP3185
1910887 SHAFT GP-HYDRAULIC MOTOR Parts scheme
  For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 191-1956 [1] KIT-BEARING (HYDRAULIC MOTOR)  
2. 095-7950 [1] RING-RETAINING  
 

#SEBP31850412
 

188-4992: STABILIZER AR

188-4992 STABILIZER AR
S/N BCZ1-2000
PART OF 235-1827 STABILIZER AR
AN ATTACHMENT
i01608794 SEBP3185
  For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  188-4991 Y [2] CYLINDER GP-STABILIZER  
  188-7642 Y [1] LINES GP-STABILIZER  
  188-4993 Y [1] STABILIZER GP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP31850413
 

235-1827: STABILIZER AR

235-1827 STABILIZER AR
S/N BCZ1-2000
CANNOT BE USED WITH BLADE, 1 SET OF OUTRIGGERS, CONVERSION ARRANGEMENT
AN ATTACHMENT
i02047020 SEBP3185
  For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  198-4697 Y [1] CONVERSION AR-MACHINE (AUXILIARY FUNCTION)  
  Y [2] STABILIZER AR  
  Y   SEPARATE ILLUSTRATION
 

#SEBP31850414
 

176-5133: STEERING COLUMN GP

176-5133 STEERING COLUMN GP
S/N BCZ1-2000
PART OF 187-3796 STEERING COLUMN GP
i01306732 SEBP3185
1765133 STEERING COLUMN GP Parts scheme
  For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 188-1853 [1] RING-COVER  
2. 188-1859 [1] BOSS-BEARING  
3. 188-1860 [1] BOSS-BEARING  
4. 204-5384 [1] LEVER  
5. 188-1863 [1] SPRING-LEVER  
6. 188-1864 [1] SHAFT AS-LEVER  
7. 245-0964 [1] SPRING-GAS  
8. 188-1867 [1] HEAD AS  
9. 188-1868 M [1] BOLT (M8X1X15-MM)  
10. 188-1869 M [1] BOLT (M8X1.25X36-MM)  
11. 188-1870 [1] PLATE  
12. 188-1871 [1] SPACER (10.25X25X13.5-MM THK)  
13. 188-1872 [1] PIN  
14. 2L-8509 [1] RING-LOCK  
15. 132-7705 M [1] BOLT (M6X1X18-MM)  
16. 8T-4970 M [1] BOLT (M6X1X14-MM)  
17. 6V-2313 M [1] BOLT (M5X0.8X30-MM)  
20. 5C-2874 M [1] NUT (M5X0.8-THD)  
21. 8T-9597 [2] RING-RETAINING  
22. 205-6208 [1] WASHER (26X35X0.6-MM THK)  
23. 9X-6381 [2] WASHER (6.5X12.5X1.6-MM THK)  
24. 188-1873 [1] CABLE AS  
25. 9X-6606 M [1] NUT-HEX (M10X1-THD)  
26. 6V-8227 M [1] NUT (M18X1.5-THD)  
27. 131-3540 M [1] LOCKNUT (M8X1.25-THD)  
28. 8T-0389 M [1] LOCKNUT (M10X1.5-THD)  
29. 3S-2093 [1] STRAP-CABLE  
30. 561-0207 [1] LEVER AS  
31. 8T-0269 M [3] BOLT-SOCKET HEAD (M6X1X20-MM)  
32. 201-0100 [1] PIN  
33. 129-3178 M [1] LOCKNUT (M6X1-THD)  
  M   METRIC PART
 

#SEBP31850415
 

187-3796: STEERING COLUMN GP

187-3796 STEERING COLUMN GP
S/N BCZ1-616
PART OF 198-4680 OPERATOR AR
i01545475 SEBP3185
1873796 STEERING COLUMN GP Parts scheme
  For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5W-2590 [1] KNOB AS-STEERING  
2. 5W-5900 [1] STEERING WHEEL AS  
3. 125-3249 [12] NUT-SPEED  
4. 176-5133 Y [1] STEERING COLUMN GP  
5. 176-5140 [2] BRACKET AS  
6. 176-5143 [1] LEVER AS  
7. 194-6535 [1] COVER  
8. 197-5691 [1] COVER  
9. 197-5692 [1] COVER  
10. 197-5693 [1] COVER  
11. 197-5694 [1] COVER  
12. 197-5695 [1] COVER  
13. 197-5696 [1] COVER  
14. 205-6215 [1] PUMP GP-METERING (HMU)(STEERING)  
  201-0048 [1] KIT-SEAL (METERING PUMP)  
15. 095-9785 [2] CLAMP-HOSE  
16. 125-6083 [12] SCREW-PAN HEAD  
17. 4M-6921 [4] WASHER-SPRING  
18. 7Y-7388 M [2] SCREW-BUTTON HEAD (M5X0.8X12-MM)  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP31850416
 

187-3796: STEERING COLUMN GP

187-3796 STEERING COLUMN GP
S/N BCZ617-2000
PART OF 198-4680 OPERATOR AR
i02049029 SEBP3185
1873796 STEERING COLUMN GP Parts scheme
  For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 227-6009 C [1] KNOB AS-STEERING  
2. 227-6007 C [1] STEERING WHEEL AS  
3. 125-3249 [12] NUT-SPEED  
4. 176-5133 Y [1] STEERING COLUMN GP  
5. 176-5140 [2] BRACKET AS  
6. 176-5143 [1] LEVER AS  
7. 241-2489 C [1] CAP (COVER)  
8. 197-5691 [1] COVER  
9. 197-5692 [1] COVER  
10. 197-5693 [1] COVER  
11. 197-5694 [1] COVER  
12. 197-5695 [1] COVER  
13. 197-5696 [1] COVER  
14. 205-6215 [1] PUMP GP-METERING (HMU)  
  201-0048 [1] KIT-SEAL (METERING PUMP)  
15. 095-9785 [2] CLAMP-HOSE  
16. 125-6083 [12] SCREW-PAN HEAD  
17. 4M-6921 [4] WASHER-SPRING  
18. 7Y-7388 M [2] SCREW-BUTTON HEAD (M5X0.8X12-MM)  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP31850417
 

111-1896: SWIVEL & MOUNTING GP

111-1896 SWIVEL & MOUNTING GP
S/N BCZ1-687
PART OF 186-0473 HYDRAULIC AR-LOWER
i00476974 SEBP3185
1111896 SWIVEL & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 110-6628 [1] PLATE  
2. 139-3368 Y [1] SWIVEL GP  
3. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
5. 7X-0591 [3] WASHER-HARD (17X29X3-MM THK)  
6. 7X-2552 M [3] BOLT (M16X2X30-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP31850418
 

111-1896: SWIVEL & MOUNTING GP

111-1896 SWIVEL & MOUNTING GP
S/N BCZ688-2000
PART OF 186-0473 HYDRAULIC AR-LOWER
i02063443 SEBP3185
1111896 SWIVEL & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 110-6628 [1] PLATE  
2. 249-1277 CY [1] SWIVEL & MOUNTING GP  
3. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
5. 7X-0591 [3] WASHER-HARD (17X29X3-MM THK)  
6. 7X-2552 M [3] BOLT (M16X2X30-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP31850419
 

249-1277: SWIVEL & MOUNTING GP

249-1277 SWIVEL & MOUNTING GP
S/N BCZ688-2000
PART OF 111-1896 SWIVEL & MOUNTING GP
FIELD REPLACEMENT ORDER @@@@@292-2769@@@@@
FIELD REPLACEMENT FOR @@@@@139-3368@@@@@
i02063453 SEBP3185
2491277 SWIVEL & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 249-1278 Y [1] SWIVEL GP  
2. 8U-5851 Y [1] SWIVEL GP  
3. 5W-5095 [1] PLATE  
4. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
5. 113-0693 [2] LOCKWASHER (10.2X18.1X2.2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Improvements to the Load Sensing Circuit for Better Travel Response{4351, 5057, 5479}
Improvements to the Load Sensing Circuit for Better Travel Response{4351, 5057, 5479}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Technical Information Bulletin
The Motor for the Magnet Generator Fails{1386, 5061}
The Motor for the Magnet Generator Fails{1386, 5061}
Specifications
Swing Motor
M318C Wheeled Excavator Machine System
Travel Motor
M318C Wheeled Excavator Machine System
Travel Motor
M318C Wheeled Excavator Machine System
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Systems Operation
Travel Motor
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Excavators Hydraulic System
Swing Hydraulic System
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Excavators Hydraulic System
Swing Motor
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Excavators Hydraulic System
Travel Brake Valve
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Excavators Hydraulic System
Swing Hydraulic System
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Wheeled Excavators Hydraulic System
Swing Motor
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Wheeled Excavators Hydraulic System
Travel Brake Valve
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Wheeled Excavators Hydraulic System
Travel Motor
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Wheeled Excavators Hydraulic System
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Information Release Memo
Product Line Additions: Remanufactured Pumps and Motors
Product Line Additions: Remanufactured Pumps and Motors
Testing and Adjusting
Swing Motor - Test - Measurement of Case Drain Oil
M318C Excavator Hydraulic System
Travel Motor (Stall Pressure) - Test and Adjust
M318C Excavator Hydraulic System
Travel Motor (Upstroke Pressure) - Test and Adjust
M318C Excavator Hydraulic System
Travel Motor (Drive Shaft Speed) - Test and Adjust
M318C Excavator Hydraulic System
Relief Valve (Travel Motor) - Test and Adjust
M318C Excavator Hydraulic System
Swing Speed and Overswing on Level Ground - Check
M318C Excavator Hydraulic System
Swing Speed and Overswing on Level Ground - Check
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System
Swing Motor - Test - Measurement of Case Drain Oil
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System
Relief Valve (Travel Motor) - Test and Adjust
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System
Travel Motor Speed - Calibrate
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System
Travel Motor (Upstroke Point) - Test and Adjust
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System
Travel Motor (Destroke Point) - Test and Adjust
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System
Travel Motor Speed - Calibrate
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Troubleshooting
MID 039 - CID 2104 - FMI 03
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System
MID 039 - CID 2104 - FMI 05
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System
MID 039 - CID 2104 - FMI 06
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System
Disassembly and Assembly
Travel Motor - Remove
M318C Wheeled Excavator Power Train
Travel Motor - Install
M318C Wheeled Excavator Power Train
Swing Motor - Disassemble
M318C Excavator Machine Systems
Swing Motor - Assemble
M318C Excavator Machine Systems
Swing Motor - Remove
M318C Excavator Machine Systems
Swing Motor - Install
M318C Excavator Machine Systems
Gear Motor (Fan Drive) - Assemble
M318C and M322C Excavators Machine Systems
Gear Motor (Fan Drive) - Disassemble
M318C Excavator Machine Systems
Gear Motor (Fan Drive) - Remove
M318C Excavator Machine Systems
Gear Motor (Fan Drive) - Install
M318C Excavator Machine Systems
Travel Motor - Disassemble
M318C and M322C Excavators Machine Systems
Travel Motor - Assemble
M318C Wheeled Excavator Power Train
Service Magazine
Proper Operation of Swing Function Will Prevent Damage to the Swing Motor and the Bearings in the Swing Drive {5459, 7063, 79PA}
2006/03/27
Replacing the Plug in the Travel Motor Valve {4351, 5058, 5455}
2006/03/20
Improved Travel Motor Response {4351, 5057, 5479}
2006/09/18

Caterpillar Parts SIS Catalog M318C :

ROTATING GP-MOTOR
190-8122 ROTATING GP-MOTOR
PUMP GP-PISTON
190-8199 PUMP GP-PISTON
PUMP GP-PISTON
190-8198 PUMP GP-PISTON
PUMP GP-MAIN HYDRAULIC
190-8197 PUMP GP-MAIN HYDRAULIC
PUMP GP-GEAR
196-8428 PUMP GP-GEAR
PUMP GP-GEAR
196-8424 PUMP GP-GEAR
PUMP GP-GEAR
196-8424 PUMP GP-GEAR
PUMP & MTG GP-PILOT
186-0499 PUMP & MTG GP-PILOT
SHAFT GP-HYDRAULIC MOTOR
191-0887 SHAFT GP-HYDRAULIC MOTOR
188-4992 STABILIZER AR
235-1827 STABILIZER AR
STEERING COLUMN GP
176-5133 STEERING COLUMN GP
STEERING COLUMN GP
187-3796 STEERING COLUMN GP
STEERING COLUMN GP
187-3796 STEERING COLUMN GP
SWIVEL & MOUNTING GP
111-1896 SWIVEL & MOUNTING GP
SWIVEL & MOUNTING GP
111-1896 SWIVEL & MOUNTING GP

Truck sale:

Caterpillar M318C, Construction
19,000 USD 
Caterpillar M318C, Construction
- wheel excavator
H.O. PENN MACHINERY CO., INC.
Caterpillar M318C, Construction
64,763 
Caterpillar M318C, Construction
- wheel excavator
BERGERAT MONNOYEUR SP. Z O.O.
Poland
Caterpillar M318C, Construction
36,800 
Caterpillar M318C, Construction
- wheel excavator
KELLY TRACTOR CO.
CATERPILLAR M318C 2005
 
CATERPILLAR M318C 2005
- WHEEL EXCAVATORS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus
 
$64,442 USD 
CATERPILLAR M318C 2003
- WHEEL EXCAVATORS
BERGERAT MONNOYEUR POLAND
K. Kolumba 15 - Komorniki -
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.