AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

187-3767 CONSOLE GP-OPERATOR -LH S/N BDX468-2000 PART OF 187-3797 CONSOLE GP-OPERATOR M316C WHEELED EXCAVATOR


OPERATOR STATION
CONSOLE GP
CONTROL GP-HYDRAULIC
CONTROL GP-JOYSTICK
MONITOR GP
PEDAL GP

WHEELED EXCAVATOR M316C WHEELED EXCAVATOR BDX
 M316C Excavator BDX00001-02000 (MACHINE) POWERED BY 3056 Engine SEBP3186 M316C BDX   (1999)

OPERATOR STATION

CONSOLE GP
CONSOLE GP-OPERATOR
187-3767 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
187-3767 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
187-3782 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
187-3797 CONSOLE GP-OPERATOR
COVER GP-CONSOLE
197-5700 COVER GP-CONSOLE
COVER GP-CONSOLE
197-5700 COVER GP-CONSOLE
 

#SEBP31860680
 

187-3767: CONSOLE GP-OPERATOR

187-3767 CONSOLE GP-OPERATOR -LH
S/N BDX468-2000
PART OF 187-3797 CONSOLE GP-OPERATOR
i02047094 SEBP3186
1873767 CONSOLE GP-OPERATOR Parts scheme 1873767 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your M316C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 089-7436 [1] PIN-SPRING  
2. 109-2355 [1] HOUSING-SWITCH  
3. 109-2356 [1] PLUG  
4. 125-6084 [1] NUT-SPEED  
5. 240-1366 C [1] SWITCH AS-POSITION (ARMREST)  
6. 194-7843 [1] MAGNET  
7. 195-7691 [1] LATCH AS  
8. 196-1120 Y [1] ARMREST GP (LH)  
9. 196-9061 [1] COVER  
10. 196-9062 [1] COVER  
11. 196-9063 [1] COVER  
12. 197-5681 [1] SPRING AS-GAS  
13. 201-8754 [1] BUMPER  
14. 201-8768 [1] KNOB  
15. 219-8487 [1] BRACKET AS  
16. 219-8488 [1] SUPPORT AS  
17. 219-8493 [1] ROD  
18. 089-7435 [1] CLEVIS  
19. 095-0723 M [4] SCREW-SPECIAL (M3X0.5X10-MM)  
20. 096-5962 [4] WASHER-HARD (3.4X7X0.8-MM THK)  
21. 125-6083 [1] SCREW-PAN HEAD  
22. 131-8203 M [2] SCREW-FLAT HEAD (M8X1.25X30-MM)  
23. 131-3540 M [2] LOCKNUT (M8X1.25-THD)  
24. 5Y-0660 M [3] NUT (M6X1-THD)  
25. 8T-4138 M [4] BOLT (M6X1X20-MM)  
26. 8T-4171 M [2] BOLT (M6X1X12-MM)  
27. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
28. 8U-7803 M [1] SCREW  
29. 9X-2042 M [5] SCREW-TRUSS HEAD (M6X1X12-MM)  
30. 9X-8256 [6] WASHER (6.6X12X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP31860681
 

187-3782: CONSOLE GP-OPERATOR

187-3782 CONSOLE GP-OPERATOR -RH
S/N BDX1-2000
PART OF 187-3797 CONSOLE GP-OPERATOR
i01622057 SEBP3186
1873782 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your M316C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 187-3772 [1] SUPPORT AS  
2. 196-1118 Y [1] ARMREST GP  
3. 196-9064 [1] COVER  
4. 196-9065 [1] COVER  
5. 196-9066 [1] COVER  
6. 197-5686 [1] COVER  
7. 125-6083 [1] SCREW-PAN HEAD  
8. 6R-7653 M [2] SCREW (M6X1X15-MM)  
9. 8T-3992 M [4] SCREW (M6X1X12-MM)  
10. 8U-7803 M [4] SCREW  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP31860682
 

187-3797: CONSOLE GP-OPERATOR

187-3797 CONSOLE GP-OPERATOR
S/N BDX1-2000
PART OF 198-4680 OPERATOR AR
i01612896 SEBP3186
1873797 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your M316C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 187-3767 Y [1] CONSOLE GP-OPERATOR (LH)  
2. 187-3782 Y [1] CONSOLE GP-OPERATOR (RH)  
3. 197-5687 [1] COVER  
4. 125-6083 [1] SCREW-PAN HEAD  
5. 5C-9553 M [8] BOLT (M6X1X16-MM)  
6. 8T-4138 M [4] BOLT (M6X1X20-MM)  
7. 9X-8256 [12] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP31860683
 

193-7789: CONTROL GP-HYDRAULIC HAND

193-7789 CONTROL GP-HYDRAULIC HAND -BLADE, STABILIZER
S/N BDX1-2000
PART OF 187-3793 CONTROL GP-PILOT OPERATED HYD
i01622209 SEBP3186
1937789 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your M316C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 116-4481 [1] PLATE  
2. 223-1394 [1] KIT-LEVER (HAND CONTROL)  
    (INCLUDES BOLTS, COVER, LEVER, LEVER PIN & CAM)
3. 8T-9534 M [2] BOLT (M6X1X50-MM)  
4. 131-0432 [1] KIT-SPRING (HAND CONTROL)  
    (INCLUDES SPRINGS)
5. 8U-5892 [1] BOOT  
6. 201-2484 [2] KIT-REGULATOR (HAND CONTROL)  
7. 201-2485 [2] KIT-PLUNGER (HAND CONTROL)  
    (EACH INCLUDES PLUNGER GUIDE, HOLLOW PLUNGER, WASHER, STANDARD PLATE & SNAP RING)
8. 116-4484 [1] HANDLE  
  M   METRIC PART
 

#SEBP31860684
 

112-5699: CONTROL GP-HYDRAULIC PEDAL

112-5699 CONTROL GP-HYDRAULIC PEDAL -TRAVEL
S/N BDX1-2000
PART OF 188-4972 CONTROL GP-PEDAL
AN ATTACHMENT
i00491201 SEBP3186
1125699 CONTROL GP-HYDRAULIC PEDAL Parts scheme
  For full view, you need register

Parts for your M316C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 201-1357 [1] KIT-PLATE (PEDAL)  
    (ALSO INCLUDES PARTS MARKED N IN GRAPHIC)
2. 117-8699 [1] WASHER (12.1X24X1.95-MM THK)  
3. 107-2723 M [1] BOLT-SOCKET HEAD (M12X1.75X20-MM)  
4. 201-0533 [1] KIT-BELLOWS (PEDAL)  
    (INCLUDES BELLOWS)
5. 223-1445 [1] PEDAL  
6. 201-0502 L [1] KIT-PEDAL  
    (ALSO INCLUDES PARTS MARKED H IN GRAPHIC)
7. 116-1119 M [1] SETSCREW  
8. 5P-7970 LM [2] NUT (M8X1.25-THD)  
9. 201-0901 [1] KIT-SPRING  
    (INCLUDES SPRING)
10. 126-8059 [1] CAP-PLASTIC  
11. 201-1376 [2] KIT-REGULATOR (PEDAL)  
12. 201-1373 [2] KIT-PLUNGER (PEDAL)  
    (EACH INCLUDES PLUNGER, WASHER, PLATER, SNAP RING & BELLOW)
14. 116-1132 J [1] BOOT  
15. 5C-2890 JM [2] NUT (M6X1-THD)  
16. 5W-1341 JM [1] BOLT-SOCKET HEAD (M8X1.25X16-MM)  
17. 117-8683 J [1] PIN-SPRING  
18. 129-4508 [1] COIL AS  
19. 7X-2619 JM [2] BOLT (M6X1X10-MM)  
20. 8C-6364 JM [2] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
   
    AVAILABLE REPAIR KIT(S):
  201-1395 J [1] KIT-PEDAL (HYDRAULIC PEDAL CONTROL)  
    (ALSO INCLUDES PARTS MARKED P IN GRAPHIC))
  J   KIT MARKED J SERVICES PART(S) MARKED J
  L   KIT MARKED L SERVICES PART(S) MARKED L
  M   METRIC PART
 

#SEBP31860685
 

112-5704: CONTROL GP-HYDRAULIC PEDAL

112-5704 CONTROL GP-HYDRAULIC PEDAL
S/N BDX1-2000
PART OF 198-4680 OPERATOR AR, 187-7375, 187-7376, 187-7378 VALVE & LINES GP-AUXILIARY
ALSO AN ATTACHMENT
i00491235 SEBP3186
1125704 CONTROL GP-HYDRAULIC PEDAL Parts scheme
  For full view, you need register

Parts for your M316C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 201-0895 [1] KIT-PLATE (PEDAL CONTROL)  
    (INCLUDES BUSHINGS & PLATE)
2. 117-8699 [1] WASHER (12.1X24X1.95-MM THK)  
3. 107-2723 M [1] BOLT-SOCKET HEAD (M12X1.75X20-MM)  
4. 201-0901 [1] KIT-SPRING (PEDAL CONTROL)  
    (INCLUDES SPRINGS)
5. 117-8700 [1] PEDAL  
6. 201-0502 J [1] KIT-PEDAL (PEDAL CONTROL)  
    (INCLUDES SCREWS, NUTS & PEDAL AXIS)
7. 116-1119 JM [1] SETSCREW  
8. 5P-7970 M [2] NUT (M8X1.25-THD)  
9. 242-1979 [2] KIT-REGULATOR (WITH SPRING)(PEDAL CONTROL)  
    (INCLUDES WASHER RETAINER, SPRING RETAINER, SPRING, SHIMS, & SPOOL)
10. 126-8059 [1] CAP-PLASTIC  
11. 242-1978 [2] KIT-PLUNGER (PEDAL)  
    (INCLUDES PLUNGER, PLUNGER GUIDE, WASHER, PLATER, SNAP RING & PROTECTING CAP)
12. 201-0533 [1] KIT-BELLOWS (PEDAL CONTROL)  
    (INCLUDES BELLOWS)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP31860686
 

222-6205: CONTROL GP-JOYSTICK

222-6205 CONTROL GP-JOYSTICK
S/N BDX1-2000
PART OF 187-3793 CONTROL GP-PILOT OPERATED HYD
i01741201 SEBP3186
2226205 CONTROL GP-JOYSTICK Parts scheme
  For full view, you need register

Parts for your M316C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 136-1206 [1] CONTROL GP-HANDLE (JOYSTICK)(LH/RH)  
2. 122-1905 [1] BELLOWS  
3. 151-4522 [1] KIT-LEVER (JOYSTICK CONTROL)  
    (INCLUDES NUT, LEVER & PIN)
4. 198-1016 [1] KIT-JOINT (JOYSTICK CONTROL)  
    (INCLUDES SHIMS & CARDAN)
5. 122-1904 [1] PLATE  
6. 207-5209 [1] KIT-PLUNGER (JOYSTICK CONTROL)  
    (INCLUDES PLUNGERS, PLUNGER GUIDES, PLATERS & SNAP RINGS)
7. 205-4015 [1] KIT-PLUNGER (JOYSTICK CONTROL)  
    (INCLUDES PLUNGERS, PLUNGER GUIDES, PLATERS & SNAP RINGS)
8. 9T-2837 [1] KIT-SEAL (VALVE)(JOYSTICK CONTROL)  
    (INCLUDES RINGS, PINS & BOLT)
9. 260-7505 [2] KIT-PLUNGER VALVE (JOYSTICK CTL, PORT 2, PORT 4)  
    (INCLUDES RETAINER-WASHER, RETAINER-SPRING, SPRINGS, SHIMS, SPOOL, & PIN)
10. 260-7506 [2] KIT-PLUNGER VALVE (JOYSTICK CTL, PORT 1, PORT 2)  
    (INCLUDES RETAINER-WASHER, RETAINER-SPRING, SPRINGS, SHIMS, SPOOL, & PIN)
11. 205-5690 [1] SPRING  
 

#SEBP31860687
 

243-7058: CONTROL GP-MONITOR

243-7058 CONTROL GP-MONITOR
S/N BDX1-2000
PART OF 262-6996 SERVICE GP-MONITOR
ALSO AN ATTACHMENT
i02193855 SEBP3186
2437058 CONTROL GP-MONITOR Parts scheme
  For full view, you need register

Parts for your M316C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 228-8954 [1] PLATE  
2. 228-8955 [1] PLATE  
3. 228-8957 [1] PLATE  
4. 228-8958 [1] PLATE  
5. 111-4627 M [4] SCREW-MACHINE (M6X1X30-MM)  
6. 102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCULEDS RECEPTACLE AS & WEDGE)
7. 9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
8. 186-3735 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
  M   METRIC PART
 

#SEBP31860688
 

188-4972: CONTROL GP-PEDAL

188-4972 CONTROL GP-PEDAL
S/N BDX1-467
AN ATTACHMENT
i01611168 SEBP3186
1884972 CONTROL GP-PEDAL Parts scheme
  For full view, you need register

Parts for your M316C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
2. 186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
3. 112-5699 Y [1] CONTROL GP-HYDRAULIC PEDAL (TRAVEL)  
4. 175-3349 [1] RECEPTACLE AS  
5. 193-9191 [1] BRACKET  
6. 194-7839 [1] SWITCH AS-POSITION (TRAVEL LOCK)  
7. 194-7843 [1] MAGNET  
8. 095-0723 M [2] SCREW-SPECIAL (M3X0.5X10-MM)  
9. 096-5962 [2] WASHER-HARD (3.4X7X0.8-MM THK)  
10. M [2] SCREW (M3X0.5X8-MM)  
11. 3C-6969 M [2] NUT (M3X0.5-THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP31860689
 

188-4972: CONTROL GP-PEDAL

188-4972 CONTROL GP-PEDAL
S/N BDX468-2000
AN ATTACHMENT
i02049064 SEBP3186
1884972 CONTROL GP-PEDAL Parts scheme
  For full view, you need register

Parts for your M316C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
2. 186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
3. 112-5699 Y [1] CONTROL GP-HYDRAULIC PEDAL (TRAVEL)  
4. 175-3349 [1] RECEPTACLE AS  
5. 193-9191 [1] BRACKET  
6. 240-1366 C [1] SWITCH AS-POSITION (TRAVEL LOCK)  
7. 194-7843 C [1] MAGNET  
8. 095-0723 M [2] SCREW-SPECIAL (M3X0.5X10-MM)  
9. 096-5962 [2] WASHER-HARD (3.4X7X0.8-MM THK)  
10. M [2] SCREW (M3X0.5X8-MM)  
11. 3C-6969 M [2] NUT (M3X0.5-THD)  
12. 8C-8580 M [2] BOLT-SOCKET HEAD (M5X0.8X16-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Engine Speed Control
M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers
Oscillating Axle Control
M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers
Swing Lock Pin Control
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers
Seat
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers
Automatic Lubrication System Control - If Equipped
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers
Automatic Lubrication System Control - If Equipped
M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers
Technical Information Bulletin
NEW REED SWITCH IMPROVES RELIABILITY
NEW REED SWITCH IMPROVES RELIABILITY
Specifications
Operator Console
M316C Excavator Machine System
Troubleshooting
MID 039 - CID 1628 - FMI 04
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System
MID 039 - CID 1628 - FMI 05
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System
Disassembly and Assembly
Hydraulic Lockout Control - Remove
M316C Excavator Machine Systems
Hydraulic Lockout Control - Install
M316C Excavator Machine Systems

Caterpillar Parts SIS Catalog M316C :

CONSOLE GP-OPERATOR
187-3767 CONSOLE GP-OPERATOR
CONNECTOR GP-CAB HEATER LINES
196-4472 CONNECTOR GP-CAB HEATER LINES
CONDENSER GP-REFRIGERANT
217-3086 CONDENSER GP-REFRIGERANT
CONDENSER & MTG GP-REFRIGERANT
198-4684 CONDENSER & MTG GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
3E-1906 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
186-0512 COMPRESSOR GP-REFRIGERANT
COIL GP-EVAPORATOR
217-2810 COIL GP-EVAPORATOR
CAB GP
201-8750 CAB GP
CONSOLE GP-OPERATOR
187-3782 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
187-3797 CONSOLE GP-OPERATOR
CONTROL GP-HYDRAULIC HAND
193-7789 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC PEDAL
112-5699 CONTROL GP-HYDRAULIC PEDAL
CONTROL GP-HYDRAULIC PEDAL
112-5704 CONTROL GP-HYDRAULIC PEDAL
CONTROL GP-JOYSTICK
222-6205 CONTROL GP-JOYSTICK
CONTROL GP-MONITOR
243-7058 CONTROL GP-MONITOR
CONTROL GP-PEDAL
188-4972 CONTROL GP-PEDAL

Truck sale:

Caterpillar M316C
 
Caterpillar M316C
- wheel excavator
MILTON CAT
Caterpillar M316C, wheel excavator, Construction
63,000 
Caterpillar M316C, wheel excavator, Construction
- wheel excavator
MACALLISTER MACHINERY CO., INC
Caterpillar M316C, Crawler Excavators, Construction
56,653 
Caterpillar M316C, Crawler Excavators, Construction
- Crawler Excavators
TOROMONT CAT
 
39,660 
Caterpillar M316C, skidder, Forestry equipment


 
39,270 
Caterpillar M316C, Crawler Excavators, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.