202-1136 WIRING GP-CHASSIS S/N BDM681-787 ELECTRONIC PART OF 188-4960 RISER AR-CAB AN ATTACHMENT M315C

202-1136: WIRING GP-CHASSIS

202-1136 WIRING GP-CHASSIS
S/N BDM681-787
ELECTRONIC
PART OF 188-4960 RISER AR-CAB
AN ATTACHMENT

Parts for your M315C WHEELED EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	102-8802	[3]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
2.	137-4195	[1]	CAP
3.	202-1137	[1]	HARNESS AS-CHASSIS (ELECTRONIC, SWITCHES, SENSORS)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2260	[8]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[23]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[2]	KIT-CONNECTING PLUG (6-PIN)
			(EACH CONNECTING PLUG KIT INCLUDES PLUG AS & WEDGE)
4.	210-0396	[1]	PLUG AS-CODE (MONITOR)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	5P-5623 BD	[1]	WIRE-ELECTRICAL (16-GA, BLACK)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
5.	214-0861	[2]	RECEPTACLE GP-AUXILIARY START
			(EACH INCLUDES)
	8T-8737	[3]	PLUG-SEAL
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
6.	214-0862	[2]	RECEPTACLE AS
			(EACH INCLUDES)
	8T-8737	[6]	PLUG-SEAL
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
7.	214-0863	[1]	RECEPTACLE GP-AUXILIARY START
	8T-8737	[8]	PLUG-SEAL
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
8.	219-5762	[1]	HARNESS AS-SENSOR
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
9.	096-0192	[1]	LOCKWASHER (EXTERNAL TOOTH)
10.	129-3178 M	[1]	LOCKNUT (M6X1-THD)
11.	134-2540	[1]	RECEPTACLE AS-CONNECTOR
12.	4P-8134	[3]	CLIP (LADDER)
13.	5C-2874 M	[1]	NUT (M5X0.8-THD)
14.	6D-4244	[1]	CLIP (LOOP)
15.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
16.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
17.	9X-8256	[1]	WASHER (6.6X12X2-MM THK)

	096-0061 BF	[15]	STRAP-CABLE
	B		USE AS REQUIRED
	D		ORDER BY THE METER
	F		NOT SHOWN
	M		METRIC PART

202-1136: WIRING GP-CHASSIS

WIRING GP-CHASSIS

202-1136 WIRING GP-CHASSIS
S/N BDM788-2000
ELECTRONIC
PART OF 188-4960 RISER AR-CAB
AN ATTACHMENT

Parts for your M315C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	102-8802	[3]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
2.	137-4195	[1]	CAP
3.	163-6758 C	[1]	WIRE AS
4.	202-1137	[1]	HARNESS AS-CHASSIS (ELECTRONIC, SWITCHES, SENSORS)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2260	[8]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[23]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[2]	KIT-CONNECTING PLUG (6-PIN)
			(EACH CONNECTING PLUG KIT INCLUDES PLUG AS & WEDGE)
5.	210-0396	[1]	PLUG AS-CODE (MONITOR)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	5P-5623 BD	[1]	WIRE-ELECTRICAL (16-GA, BLACK)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
6.	214-0861	[2]	RECEPTACLE GP-AUXILIARY START
			(EACH INCLUDES)
	8T-8737	[3]	PLUG-SEAL
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
7.	214-0862	[2]	RECEPTACLE AS
			(EACH INCLUDES)
	8T-8737	[6]	PLUG-SEAL
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
8.	214-0863	[1]	RECEPTACLE GP-AUXILIARY START
	8T-8737	[8]	PLUG-SEAL
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
9.	219-5762	[1]	HARNESS AS-SENSOR
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
10.	096-0192	[1]	LOCKWASHER (EXTERNAL TOOTH)
11.	129-3178 M	[1]	LOCKNUT (M6X1-THD)
12.	134-2540	[1]	RECEPTACLE AS-CONNECTOR
13.	4P-8134	[3]	CLIP (LADDER)
14.	5C-2874 M	[1]	NUT (M5X0.8-THD)
15.	6D-4244	[1]	CLIP (LOOP)
16.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
17.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
18.	9X-8256	[1]	WASHER (6.6X12X2-MM THK)

	096-0061 BF	[15]	STRAP-CABLE
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	F		NOT SHOWN
	M		METRIC PART

209-8865: WIRING GP-CHASSIS

WIRING GP-CHASSIS

209-8865 WIRING GP-CHASSIS
S/N BDM1-2000
PART OF 207-0370 CHASSIS AR

Parts for your M315C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8U-6128	[1]	CAP-PROTECTION
2.	104-6692	[2]	RECEPTACLE AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE.)
3.	137-4195	[1]	CAP
4.	207-7170	[1]	BRACKET
5.	209-8867	[1]	HARNESS AS-CHASSIS
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2260	[8]	KIT-CONNECTING PLUG (3-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2270	[23]	KIT-CONNECTING PLUG (2-PIN)
			(EACH CONNECTING PLUG KIT INCLUDES PLUG AS & WEDGE)
6.	210-0396	[1]	PLUG AS-CODE (MONITOR)
7.	214-0861	[2]	RECEPTACLE GP-AUXILIARY START
			(EACH INCLUDES)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE.)
8.	214-0862	[2]	RECEPTACLE AS
			(EACH INCLUDES)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECPTACLE AS & WEDGE.)
9.	214-0863	[1]	RECEPTACLE GP-AUXILIARY START
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE.)
10.	219-5762	[1]	HARNESS AS-SENSOR
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE.)
11.	096-0192	[1]	LOCKWASHER (EXTERNAL TOOTH)
12.	129-3178 M	[1]	LOCKNUT (M6X1-THD)
13.	134-2540	[1]	RECEPTACLE AS-CONNECTOR
14.	4P-8134	[3]	CLIP (LADDER)
15.	5C-2874 M	[1]	NUT (M5X0.8-THD)
16.	6D-4244	[2]	CLIP (LOOP)
17.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
18.	8T-4133 M	[1]	NUT (M10X1.5-THD)
19.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
20.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
21.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
22.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
23.	9X-8256	[1]	WASHER (6.6X12X2-MM THK)

	096-0061 BF	[10]	STRAP-CABLE
	B		USE AS REQUIRED
	F		NOT SHOWN
	M		METRIC PART

209-8865: WIRING GP-CHASSIS

WIRING GP-CHASSIS

209-8865 WIRING GP-CHASSIS
S/N BDM1-680
PART OF 207-0370 CHASSIS AR

Parts for your M315C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	104-6692	[3]	RECEPTACLE AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE.)
2.	137-4195	[1]	CAP
3.	210-0396	[1]	PLUG AS-CODE (MONITOR)
4.	214-0861	[2]	RECEPTACLE GP-AUXILIARY START
			(EACH INCLUDES)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE.)
5.	214-0862	[2]	RECEPTACLE AS
			(EACH INCLUDES)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECPTACLE AS & WEDGE.)
6.	214-0863	[1]	RECEPTACLE GP-AUXILIARY START
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE.)
7.	219-5762	[1]	HARNESS AS-SENSOR
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE.)
8.	228-7977	[1]	HARNESS AS-CHASSIS (ELECTRONIC)
	117-3188	[3]	COVER
	147-1446	[1]	PLUG AS-CONNECTOR (70-PIN)
	160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
			(EACH KIT-PLUG INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	9X-4391	[1]	PLUG AS-CONNECTOR (70-PIN)
	3E-4367	[1]	RING-RETAINING
	3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
	9X-5615	[1]	SEAL (INTERFACE, 70-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2260	[8]	KIT-CONNECTING PLUG (3-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH CONNECTING PLUG KIT INCLUDES PLUG AS & WEDGE)
9.	096-0192	[1]	LOCKWASHER (EXTERNAL TOOTH)
10.	129-3178 M	[1]	LOCKNUT (M6X1-THD)
11.	134-2540	[1]	RECEPTACLE AS-CONNECTOR
12.	4P-8134	[3]	CLIP (LADDER)
13.	5C-2874 M	[1]	NUT (M5X0.8-THD)
14.	6D-4244	[1]	CLIP (LOOP)
15.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
16.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
17.	9X-8256	[1]	WASHER (6.6X12X2-MM THK)

	096-0061 BF	[10]	STRAP-CABLE
	B		USE AS REQUIRED
	F		NOT SHOWN
	M		METRIC PART

209-8865: WIRING GP-CHASSIS

WIRING GP-CHASSIS

209-8865 WIRING GP-CHASSIS
S/N BDM681-2000
PART OF 207-0370 CHASSIS AR

Parts for your M315C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	104-6692	[3]	RECEPTACLE AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE.)
2.	137-4195	[1]	CAP
3.	210-0396	[1]	PLUG AS-CODE (MONITOR)
4.	214-0861	[2]	RECEPTACLE GP-AUXILIARY START
			(EACH INCLUDES)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE.)
5.	214-0862	[2]	RECEPTACLE AS
			(EACH INCLUDES)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECPTACLE AS & WEDGE.)
6.	214-0863	[1]	RECEPTACLE GP-AUXILIARY START
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE.)
7.	219-5762	[1]	HARNESS AS-SENSOR
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE.)
8.	228-7977	[1]	HARNESS AS-CHASSIS (ELECTRONIC)
	117-3188	[3]	COVER
	147-1446	[1]	PLUG AS-CONNECTOR (70-PIN)
	160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
			(EACH KIT-PLUG INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	9X-4391	[1]	PLUG AS-CONNECTOR (70-PIN)
	3E-4367	[1]	RING-RETAINING
	3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
	9X-5615	[1]	SEAL (INTERFACE, 70-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2260	[8]	KIT-CONNECTING PLUG (3-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH CONNECTING PLUG KIT INCLUDES PLUG AS & WEDGE)
9.	096-0192	[1]	LOCKWASHER (EXTERNAL TOOTH)
10.	129-3178 M	[1]	LOCKNUT (M6X1-THD)
11.	134-2540	[1]	RECEPTACLE AS-CONNECTOR
12.	4P-8134	[3]	CLIP (LADDER)
13.	5C-2874 M	[1]	NUT (M5X0.8-THD)
14.	6D-4244	[1]	CLIP (LOOP)
15.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
16.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
17.	9X-8256	[1]	WASHER (6.6X12X2-MM THK)

	096-0061 BF	[10]	STRAP-CABLE
	B		USE AS REQUIRED
	F		NOT SHOWN
	M		METRIC PART

187-3798: WIRING GP-CONSOLE

WIRING GP-CONSOLE

187-3798 WIRING GP-CONSOLE
S/N BDM1-2000
PART OF 198-4680 OPERATOR AR

Parts for your M315C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5W-1992	[6]	TERMINAL
2.	5W-9665	[1]	HOUSING-PLUG
3.	7Y-3950	[2]	TERMINAL-BLADE (14-GA TO 20-GA)
4.	7Y-3953	[1]	CONNECTOR-RECEPTACLE
5.	9G-7641 Y	[1]	SWITCH GP-START (ENGINE, KEY)
6.	106-0107	[1]	SWITCH GP-ROTARY (THROTTLE POSITION)
	3E-3383	[1]	WEDGE-RECEPTACLE LOCK (6-PIN)
	7Y-5458 M	[1]	NUT (M12X1-THD)
	7Y-5464	[1]	WASHER (12.2X15.4X0.5-MM THK)
	8T-8737	[1]	PLUG-SEAL
	106-0210	[1]	SEAL
	144-1636	[5]	PIN-CONNECTOR (14-GA TO 18-GA)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
7.	113-3453	[1]	KNOB AS
8.	228-7974	[1]	HARNESS AS-CONSOLE (RH)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH CONNECTING PLUG KIT INCLUDES PLUG AS & WEDGE
	8T-8737	[2]	PLUG-SEAL
9.	193-9054	[1]	SWITCH AS (CONTROLLER BACKUP)
10.	200-2555	[1]	PANEL
11.	200-2556	[1]	PLATE
12.	202-0197	[1]	HARNESS AS-CONSOLE (LH)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS & WEDGE)
13.	220-5815	[6]	SCREW-PAN HEAD
14.	096-0061 B	[6]	STRAP-CABLE
15.	096-6166	[2]	WASHER-HARD (4.5X9X1-MM THK)
16.	097-5812	[1]	SPACER (26X32X2-MM THK)
17.	8T-0337 M	[2]	SCREW-MACHINE (M4X0.7X12-MM)
18.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

232-6670: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

232-6670 WIRING GP-ELECTRONIC CONTROL
S/N CRX1-4386
PART OF 188-5100 ENGINE AR-PRIMARY

Parts for your M315C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6I-0260 M	[2]	BOLT (M8X1.25X25-MM)
2.	6I-0291 M	[2]	NUT (M8X1.25-THD)
3.	100-4841 M	[1]	BOLT (M6X1X10-MM)
4.	101-3615 M	[1]	BOLT (M8X1.25X10-MM)
5.	124-3815 M	[1]	BOLT (M8X1.25X16-MM)
6.	217-8477	[1]	CLIP
7.	217-9038	[3]	BOLT (M4X0.7X14-MM)
8.	224-8642	[1]	HARNESS AS-ENGINE
9.	225-5071	[1]	BRACKET-MOUNTING
10.	228-8960	[2]	CLIP
11.	232-3126	[2]	CLIP
13.	232-6664	[1]	BRACKET-SUPPORT
14.	232-6666	[1]	CLIP
15.	232-6667	[1]	BRACKET
	M		METRIC PART

232-6670: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

232-6670 WIRING GP-ELECTRONIC CONTROL
S/N CRX4387-99999
PART OF 188-5100 ENGINE AR-PRIMARY

Parts for your M315C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6I-0260 M	[2]	BOLT (M8X1.25X25-MM)
2.	6I-0291 M	[2]	NUT (M8X1.25-THD)
3.	100-4841 M	[1]	BOLT (M6X1X10-MM)
4.	124-3815 M	[2]	BOLT (M8X1.25X16-MM)
5.	217-8477	[3]	CLIP
6.	217-9038	[3]	BOLT (M4X0.7X14-MM)
7.	255-3462	[1]	HARNESS AS-CONTROL (ELECTRONIC)
8.	258-1033	[1]	BRACKET
9.	228-8960	[2]	CLIP
10.	232-3126	[2]	CLIP
11.	232-6664	[1]	BRACKET-SUPPORT
12.	232-6666	[1]	CLIP
	M		METRIC PART

239-0164: WIRING GP-ENGINE

WIRING GP-ENGINE

239-0164 WIRING GP-ENGINE
S/N BDM1-2000
PART OF 207-0370 CHASSIS AR

Parts for your M315C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	106-8704	[1]	SUPPRESSOR AS-ARC
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
2.	205-4285	[1]	CONVERTER-POWER (24-VOLT TO 12-VOLT)
3.	238-2594	[1]	HARNESS AS-ENGINE (LH)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8730	[9]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
4.	096-0061	[1]	STRAP-CABLE
5.	8T-0288 M	[2]	BOLT (M5X0.8X12-MM)
	M		METRIC PART

211-7985: WIRING GP-FAN

WIRING GP-FAN

211-7985 WIRING GP-FAN -RADIATOR
S/N BDM1-2000
PART OF 207-0373 INSTALLATION AR-ENGINE

Parts for your M315C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	211-7988	[1]	HARNESS AS-WIRING (FAN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
2.	096-0061 B	[3]	STRAP-CABLE
3.	4P-8134	[2]	CLIP (LADDER)
4.	9D-3768	[1]	GROMMET
	B		USE AS REQUIRED

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Battery - Recycle
M313C and M315C Excavators

Service Hour Meter
M313C and M315C Excavators

Battery Disconnect Switch
M313C and M315C Excavators

Power Receptacle
M313C and M315C Excavators

Window Wiper and Washer Control
M313C and M315C Excavators

Engine Starting with Jump Start Cables - If Equipped
M313C and M315C Excavators

Quick Coupler Control - If Equipped
M313C and M315C Excavators

Battery or Battery Cable - Inspect/Replace
M313C and M315C Excavators

Engine Starting with Jump Start Cables
M313C and M315C Excavators

Fuses - Replace
M313C and M315C Excavators

Engine Start Switch
M313C and M315C Excavators

Automatic Lubrication System Control - If Equipped
M313C and M315C Excavators

Joystick Steering - If Equipped
M313C and M315C Excavators

Fuses - Replace
M313C and M315C Excavators

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

AMPSEAL 16 ConnectorSystem{7553}
AMPSEAL 16 ConnectorSystem{7553}

Field Installation of Medium Pressure Valve Group with Joystick Steering{1408, 5057, 5059, 5705}
Field Installation of Medium Pressure Valve Group with Joystick Steering{1408, 5057, 5059, 5705}

Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REPLACING THE ACTIVE MEDIUM PRESSURE FUNCTION SELECTOR SWITCH ON CERTAIN M313C, M315C, M316C, M318C, M322C WHEELED EXCAVATORS AND M322C MATERIAL HANDLERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ACTIVE MEDIUM PRESSURE FUNCTION SELECTOR SWITCH ON CERTAIN M313C, M315C, M316C, M318C, M322C WHEELED EXCAVATORS AND M322C MATERIAL HANDLERS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

C Series Wheeled Excavator Wire Harness is Wearing
C Series Wheeled Excavator Wire Harness is Wearing

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Service Letter-China

PRODUCT SUPPORT PROGRAM FOR REPLACING THE ACTIVE MEDIUM PRESSURE FUNCTION SELECTOR SWITCH ON CERTAIN M313C, M315C, M316C, M318C, M322C WHEELED EXCAVATORS AND M322C MATERIAL HANDLERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ACTIVE MEDIUM PRESSURE FUNCTION SELECTOR SWITCH ON CERTAIN M313C, M315C, M316C, M318C, M322C WHEELED EXCAVATORS AND M322C MATERIAL HANDLERS

Service Letter-Asia

Systems Operation

Relays
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

Switches
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Service Letter-APD

PRODUCT SUPPORT PROGRAM FOR REPLACING THE ACTIVE MEDIUM PRESSURE FUNCTION SELECTOR SWITCH ON CERTAIN M313C, M315C, M316C, M318C, M322C WHEELED EXCAVATORS AND M322C MATERIAL HANDLERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ACTIVE MEDIUM PRESSURE FUNCTION SELECTOR SWITCH ON CERTAIN M313C, M315C, M316C, M318C, M322C WHEELED EXCAVATORS AND M322C MATERIAL HANDLERS

Testing and Adjusting

System Schematic
Machine Security System

Electric Starting System - Test
3054E Engines for Caterpillar Built Machines

Wiring Harness (Open Circuit) - Test
Product Link 151/201

Electrical Connector - Inspect
Product Link 151/201

Wiring Harness (Short Circuit) - Test
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

Wiring Harness (Short Circuit) - Test
Product Link - PL102C

Wiring Harness (Open Circuit) - Test
Product Link - PL102C

Electrical Connector - Inspect
Product Link - PL102C

Electrical Connector - Inspect
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

Wiring Harness (Open Circuit) - Test
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

Electrical Connector - Inspect
Machine Security System

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

System Schematic
MSS3s Machine Security System

Troubleshooting

Electrical Component and Connector Locations
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

MID 039 - CID 0444 - FMI 03
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

MID 039 - CID 0444 - FMI 05
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

MID 039 - CID 0444 - FMI 06
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

MID 039 - CID 1623 - FMI 03
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

MID 039 - CID 1623 - FMI 05
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

MID 039 - CID 1623 - FMI 06
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

MID 039 - CID 1670 - FMI 04
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

MID 039 - CID 1670 - FMI 05
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

MID 122 - CID 0269 - FMI 03
Product Link 151/201

MID 122 - CID 0269 - FMI 04
Product Link 151/201

Electrical Component and Connector Locations
Machine Security System

MID 039 - CID 2198 - FMI 02
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

Sensors and Electrical Connectors
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines

Engine Wiring Information
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines

CID 1894 FMI 02
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines

Electrical Connectors - Inspect
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines

Electrical Power Supply Circuit - Test
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

Cat Data Link - Test
MSS3s Machine Security System

Wiring Harness (Open Circuit) - Test
MSS3s Machine Security System

Wiring Harness (Short Circuit) - Test
MSS3s Machine Security System

Connector Locations
MSS3s Machine Security System

Connector Contact Description
MSS3s Machine Security System

Electrical Connector - Inspect
MSS3s Machine Security System

Disassembly and Assembly

Temperature Sensor (Ambient Air) - Remove and Install
M315C Excavator Machine Systems

Temperature Sensor (Cab Air) - Remove and Install
M315C Excavator Machine Systems

Temperature Sensor (Mixed Cab Air) - Remove and Install
M315C Excavator Machine Systems

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Improved Solenoid Valves for Auxiliary High Pressure are Now Used on Series C and Series D Wheeled Excavators {1408, 5051, 5064, 5479}
2008/05/12

An Improved Radio Power Converter is used on Excavators. {1408, 1421, 7338}
2009/04/20

An Improved Switch for the Medium Pressure Function is Now Available for Certain Models of M300C Series Wheeled Excavators {1408}
2009/01/19

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Caterpillar Parts SIS Catalog M315C :

Truck sale:

60,631 USD

Caterpillar M315C, Construction
- wheel excavator
BERGERAT MONNOYEUR SP. Z O.O.
Poland

68,079

Caterpillar M315C, Construction
- wheel excavator
BERGERAT MONNOYEUR SP. Z O.O.
Poland

On Request

Caterpillar M315C, Construction
- wheel excavator
ZEPPELIN BAUMASCHINEN
Germany

$46,884 USD

CATERPILLAR M315C 2006
- WHEEL EXCAVATORS
BERGERAT MONNOYEUR POLAND
K. Kolumba 15 - Komorniki -

$39,068 USD

CATERPILLAR M315C 2005
- WHEEL EXCAVATORS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -