AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

219-8500 CAB AR -FRONT WINDOW, 1-PIECE S/N BDM1-2000 AN ATTACHMENT M315C WHEELED EXCAVATOR


OPERATOR STATION
CAB GP
AIR CONDITIONER GP
CONSOLE GP

WHEELED EXCAVATOR M315C WHEELED EXCAVATOR BDM
 M315C EXCAVATOR BDM00001-02000 (MACHINE) POWERED BY 3054 Engine SEBP3188 M315C BDM   (2003)

OPERATOR STATION

CAB GP
INSULATION GP-HEAT
210-0608 INSULATION GP-HEAT
187-3800 CAB AR
219-8500 CAB AR
188-4959 CAB GP
CAB GP
201-8750 CAB GP
CAB GP
201-8750 CAB GP
MOUNTING GP-CAB
187-3801 MOUNTING GP-CAB
188-4960 RISER AR-CAB
VISOR GP-CAB
189-6117 VISOR GP-CAB
 

#SEBP31880640
 

219-8500: CAB AR

219-8500 CAB AR -FRONT WINDOW, 1-PIECE
S/N BDM1-2000
AN ATTACHMENT
i01745580 SEBP3188
  For full view, you need register

Parts for your M315C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  219-8495 Y [1] WINDOW GP-CAB  
  205-0460 Y [1] WIPER GP-WINDOW  
  221-9037 Y [1] WIRING GP-CAB  
  Y   SEPARATE ILLUSTRATION
 

#SEBP31880641
 

188-4959: CAB GP

188-4959 CAB GP -LEXAN
S/N BDM1-2000
FOR USE IN NACD MARKET
AN ATTACHMENT
i01611186 SEBP3188
  For full view, you need register

Parts for your M315C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  201-8750 Y [1] CAB GP  
  197-5700 Y [1] COVER GP-CONSOLE  
  201-8770 Y [1] DOOR & MTG GP-CAB  
  210-1338 Y [1] DUCT GP-CAB AIR  
  187-3770 Y [1] MONITOR & MTG GP-OPERATOR  
  184-7621 Y [1] SCREEN GP-SUN  
  184-7619 Y [1] WINDOW GP-CAB (FRONT WINDOW, 50/50-SPLIT)  
  201-8765 Y [1] WINDOW GP-CAB (REAR)  
  187-3799 Y [1] WIRING GP-CAB  
  Y   SEPARATE ILLUSTRATION
 

#SEBP31880642
 

201-8750: CAB GP

201-8750 CAB GP
S/N BDM1-441
PART OF 187-3800 CAB AR, 188-4959 CAB GP
ALSO AN ATTACHMENT
i01604120 SEBP3188
2018750 CAB GP Parts scheme
  For full view, you need register

Parts for your M315C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2S-1647 [3] GROMMET  
2. 4E-1384 [2] BUMPER-CONICAL  
3. 4I-1206 [2] GUIDE  
4. 4I-3063 [1] SPRING  
5. 6C-8584 M [3] SCREW (M6X1X8-MM)  
6. 6C-8972 [1] HOOK  
7. 6C-8986 [4] CLIP-AXLE  
8. 6C-9078 [14] WASHER  
9. 6C-9087 [3] WASHER  
10. 6C-9121 [1] BRACKET AS-LAMP (CAB)  
11. 6C-9122 [2] LAMP (24-VOLT)(CAB)  
12. 6C-9232 [8] RIVET  
13. 6C-9235 [1] PLATE-IDENTIFICATION (CAB)(CAB)  
14. 9U-8263 [1] COVER  
15. 109-1270 [1] GROMMET  
16. 114-6658 [2] WASHER (6.5X17X1-MM THK)  
17. 119-8340 [6] SEAL  
18. 119-8353 [1] SCREW-SPECIAL  
19. 120-4777 [2] COVER  
20. 120-4831 [1] WASHER (18.5X32X1.5-MM THK)  
21. 120-5737 [6] WASHER (17.5X40X4-MM THK)  
22. 121-4794 [1] SEAL  
23. 139-6039 [3] NUT-RETAINER (U-TYPE)  
24. 154-4811 [1] SPACER-SPECIAL  
25. 156-6599 [1] STRIKER  
26. 161-3660 [1] BRACKET AS  
27. 161-3685 [1] ROD  
28. 164-0527 [1] ROD  
29. 164-0528 [1] LEVER GP-CAB DOOR  
  156-6642 [1] LEVER AS  
  164-0664 [1] BRACKET  
  176-1941 [1] PIN  
  185-8280 [1] WASHER-WAVE (10.5X15X0.3-MM THK)  
  185-8281 [1] SPRING  
30. 164-4344 [8] PLUG  
31. 167-4079 [1] LINER (RH)  
32. 167-4080 [1] LINER (LH)  
33. 167-4081 [1] LINER (ROOF)  
36. 167-4089 [1] COVER AS  
37. 167-4099 [1] PLATE  
38. 167-4146 [1] SUPPORT AS  
39. 167-4148 [1] LEVER  
40. 167-4158 [1] PLATE  
41. 167-4159 [1] PLATE  
42. 167-4160 [2] PLATE  
44. 167-7042 [2] SEAL  
45. 167-7272 [1] FILM-IDENTIFICATION (CATERPILLAR, CAB, REAR)  
46. 171-7426 [1] CABLE AS  
47. 176-1939 [1] LEVER AS  
  9X-2044 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
  176-1937 [1] BRACKET AS  
  176-1938 [1] LEVER  
48. 176-1942 [1] COVER  
49. 191-2767 [1] COVER  
50. 191-2768 [1] COVER  
51. 198-1747 [1] LINER (REAR LH)  
52. 201-8766 [1] HANDLE AS  
53. 201-8767 [1] HANDLE AS  
54. 205-6203 [1] GUARD  
55. 205-6216 [1] BRACKET (LOWER)  
56. 205-6217 [1] BRACKET (UPPER)  
57. 205-6220 [1] CAB AS  
58. 205-6295 [1] LATCH AS  
59. 215-2913 [2] GROMMET  
60. 217-0557 [2] SUPPORT  
61. 104-2091 [2] SCREW-FLAT HEAD (6-20X0.5-IN)  
62. 120-4779 [8] HOOK  
63. 188-9644 M [2] SCREW-FLAT HEAD (M8X1.25X25-MM)  
64. 217-6340 [1] COVER  
65. 4Y-8774 M [8] SCREW-TAPPING  
66. 5C-7261 M [2] NUT (M8X1.25-THD)  
67. 5C-9553 M [10] BOLT (M6X1X16-MM)  
68. 6C-4000 [4] SHIM (1-MM THK)  
69. 6V-7357 M [4] BOLT (M6X1X25-MM)  
70. 8C-0572 [2] WASHER (8.8X25.5X2-MM THK)  
72. 8T-4121 [9] WASHER-HARD (11X21X2.5-MM THK)  
73. 8T-4133 M [3] NUT (M10X1.5-THD)  
74. 8T-4136 M [6] BOLT (M10X1.5X25-MM)  
75. 8T-4190 M [6] BOLT (M16X2X25-MM)  
76. 8T-4192 M [6] BOLT (M12X1.75X25-MM)  
77. 8T-4200 M [3] BOLT (M8X1.25X16-MM)  
78. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
79. 9M-0057 [6] WASHER-RUBBER (1.188X0.5X0.062-IN THK)  
80. 9M-5870 [1] GROMMET  
81. 9X-2041 M [6] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
82. 9X-2042 M [4] SCREW-TRUSS HEAD (M6X1X12-MM)  
83. 9X-2044 M [17] SCREW-TRUSS HEAD (M6X1X16-MM)  
84. 9X-2045 M [2] SCREW-TRUSS HEAD (M6X1X20-MM)  
85. 9X-8256 [3] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
 

#SEBP31880643
 

201-8750: CAB GP

201-8750 CAB GP
S/N BDM442-2000
PART OF 187-3800 CAB AR, 188-4959 CAB GP
ALSO AN ATTACHMENT
i02138256 SEBP3188
2018750 CAB GP Parts scheme 2018750 CAB GP Parts scheme
  For full view, you need register

Parts for your M315C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2S-1647 [3] GROMMET  
2. 4E-1384 [2] BUMPER-CONICAL  
3. 4I-1206 [2] GUIDE  
4. 4I-3063 [1] SPRING  
5. 129-5167 CM [3] SCREW (M6X1X8-MM)  
6. 6C-8972 [1] HOOK  
7. 6C-8986 [4] CLIP-AXLE  
8. 6C-9078 [14] WASHER  
9. 6C-9087 [3] WASHER  
10. 6C-9121 [1] BRACKET AS-LAMP (CAB)  
11. 6C-9122 [2] LAMP (24-VOLT)(CAB)  
12. 6C-9232 [8] RIVET  
13. 6C-9235 [1] PLATE-IDENTIFICATION (CAB)(CAB)  
14. 9U-8263 [1] COVER  
15. 109-1270 [1] GROMMET  
16. 114-6658 [2] WASHER (6.5X17X1-MM THK)  
17. 120-5738 C [6] WASHER-RUBBER (14.5X40X2-MM THK)  
18. 119-8353 [1] SCREW-SPECIAL  
19. 120-4777 [2] COVER  
20. 120-4831 [1] WASHER (18.5X32X1.5-MM THK)  
21. 120-5737 [6] WASHER (17.5X40X4-MM THK)  
22. 117-4473 BCE SEAL  
23. 139-6039 C [2] NUT-RETAINER (U-TYPE)  
24. 154-4811 [1] SPACER-SPECIAL  
25. 156-6599 [1] STRIKER  
26. 201-4530 C [1] BRACKET AS  
27. 161-3685 [1] ROD  
28. 164-0527 [1] ROD  
29. 164-0528 [1] LEVER GP-CAB DOOR  
  156-6642 [1] LEVER AS  
  164-0664 [1] BRACKET  
  176-1941 [1] PIN  
  185-8280 [1] WASHER-WAVE (10.5X15X0.3-MM THK)  
  185-8281 [1] SPRING  
30. 164-4344 [8] PLUG (PLASTIC)  
31. 167-4079 [1] LINER (RH)  
32. 167-4080 [1] LINER (LH)  
33. 167-4081 [1] LINER (ROOF)  
36. 167-4089 [1] COVER AS  
37. 167-4099 [1] PLATE  
38. 167-4146 [1] SUPPORT AS  
39. 167-4148 [1] LEVER  
40. 167-4158 [1] PLATE  
41. 167-4159 [1] PLATE  
42. 167-4160 [2] PLATE  
44. 167-7042 [2] SEAL  
45. 167-7272 [1] FILM-IDENTIFICATION (CATERPILLAR, CAB, REAR)  
46. 171-7426 [1] CABLE AS  
47. 176-1939 [1] LEVER AS  
  9X-2044 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
  176-1937 [1] BRACKET AS  
  176-1938 [1] LEVER  
48. 176-1942 [1] COVER  
49. 191-2767 [1] COVER  
50. 191-2768 [1] COVER  
51. 198-1747 [1] LINER (REAR, LH)  
53. 201-8767 [1] HANDLE AS  
54. 205-6203 [1] GUARD  
55. 233-0987 C [1] BRACKET (LOWER)  
56. 205-6217 [1] BRACKET (UPPER)  
57. 254-3271 [1] CAB AS  
58. 205-6295 [1] LATCH AS  
59. 215-2913 [2] GROMMET  
60. 217-0557 [2] SUPPORT  
61. 104-2091 [2] SCREW-FLAT HEAD (6-20X0.5-IN)  
62. 120-4779 [8] HOOK  
63. 188-9644 M [2] SCREW-FLAT HEAD (M8X1.25X25-MM)  
64. 217-6340 [1] COVER  
65. 220-6420 C [8] SCREW  
66. 5C-7261 M [2] NUT (M8X1.25-THD)  
67. 5C-9553 M [10] BOLT (M6X1X16-MM)  
68. 8M-4069 C [2] WASHER (10.3X38.1X5-MM THK)  
69. 6V-7357 M [4] BOLT (M6X1X25-MM)  
70. 8C-0572 [2] WASHER (8.8X25.5X2-MM THK)  
72. 8T-4121 [9] WASHER-HARD (11X21X2.5-MM THK)  
73. 8T-4133 M [3] NUT (M10X1.5-THD)  
74. 8T-4136 M [6] BOLT (M10X1.5X25-MM)  
75. 8T-4190 M [6] BOLT (M16X2X25-MM)  
76. 8T-4192 M [6] BOLT (M12X1.75X25-MM)  
77. 8T-4200 M [3] BOLT (M8X1.25X16-MM)  
78. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
79. 9M-0057 [6] WASHER-RUBBER (1.188X0.5X0.062-IN THK)  
80. 9M-5870 [1] GROMMET  
81. 9X-2041 M [3] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
82. 9X-2042 M [4] SCREW-TRUSS HEAD (M6X1X12-MM)  
83. 9X-2044 M [17] SCREW-TRUSS HEAD (M6X1X16-MM)  
84. 9X-2045 M [2] SCREW-TRUSS HEAD (M6X1X20-MM)  
85. 4I-4392 C [3] CLIP  
86. 5P-7689 C [1] PLUG-BUTTON  
87. 8T-0269 CM [2] BOLT-SOCKET HEAD (M6X1X20-MM)  
88. 108-1780 CM [4] BOLT-SOCKET HEAD (M6X1X45-MM)  
89. 121-4795 C [13] PLUG  
90. 215-4379 C [1] GRIP-HANDLE  
91. 217-0559 C [1] SEAL-WEATHER  
92. 224-2669 C [2] PLUG-PLASTIC  
93. 229-8059 C [1] STRIKER (RH)  
94. 229-8060 C [1] STRIKER (LH)  
95. 233-7864 C [1] FASTENER  
96. 233-7865 C [2] FASTENER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP31880644
 

217-2810: COIL GP-EVAPORATOR

217-2810 COIL GP-EVAPORATOR
S/N BDM1-2000
PART OF 210-1339 AIR CONDITIONER GP
i01678988 SEBP3188
2172810 COIL GP-EVAPORATOR Parts scheme
  For full view, you need register

Parts for your M315C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 217-3812 [1] ADAPTER AS  
2. 217-3813 [1] ADAPTER AS  
3. 122-6015 [1] VALVE  
4. 121-4342 [1] SEAL-O-RING  
5. 121-4344 [1] SEAL-O-RING  
6. 121-4345 [1] SEAL-O-RING  
7. 121-4801 [1] SEAL-O-RING  
8. 156-0065 [1] PLATE (INSIDE)  
9. 156-0066 [1] PLATE (OUTSIDE)  
10. 8T-6699 M [2] BOLT-SOCKET HEAD (M5X0.8X35-MM)  
11. 5C-9553 M [1] BOLT (M6X1X16-MM)  
12. 095-1255 [1] LOCKWASHER  
13. 217-3814 [1] SENSOR AS-TEMPERATURE (AIR CONDITIONER CONDENSER)  
  M   METRIC PART
 

#SEBP31880645
 

186-0512: COMPRESSOR GP-REFRIGERANT

186-0512 COMPRESSOR GP-REFRIGERANT
S/N BDM1-2000
PART OF 207-0373 INSTALLATION AR-ENGINE
i01552676 SEBP3188
1860512 COMPRESSOR GP-REFRIGERANT Parts scheme
  For full view, you need register

Parts for your M315C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-6356 [1] PLATE  
2. 3E-1906 Y [1] COMPRESSOR GP-REFRIGERANT  
3. 121-4342 [1] SEAL-O-RING  
4. 121-4344 [1] SEAL-O-RING  
5. 145-7211 [1] V-BELT (1250-MM LG)(REFRIGERANT COMPRESSOR)  
6. 168-6666 [2] PLATE  
7. 169-5660 [1] STRAP AS  
8. 169-5680 [1] COVER AS  
9. 171-7566 [1] BRACKET AS  
10. 172-3565 B [1] SHIM (0.2-MM THK)(.20MM THK)  
11. 3E-4053 [1] FITTING AS-AIR CONDITIONER  
11A. 3E-4052 [1] CAP-SEAL (HIGH SIDE CHARGE PORT)  
11B. 3E-4058 [1] VALVE AS (REFRIGERANT, HIGH SIDE)  
12. 3E-4054 [1] FITTING AS-AIR CONDITIONER  
12A. 3E-4051 [1] CAP-SEAL (LOW SIDE CHARGE PORT)  
12B. 3E-4057 [1] VALVE AS (REFRIGERANT, LOW SIDE)  
13. 7X-0623 [4] WASHER (10.5X21X2-MM THK)  
14. 7X-2436 M [1] BOLT (M12X1.75X100-MM)  
15. 8T-0389 M [1] LOCKNUT (M10X1.5-THD)  
16. 8T-1159 M [4] BOLT-SOCKET HEAD (M10X1.5X25-MM)  
17. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
18. 8T-4185 M [1] BOLT (M10X1.5X50-MM)  
19. 8T-4195 M [5] BOLT (M10X1.5X30-MM)  
20. 8T-5005 M [1] BOLT (M10X1.5X70-MM)  
21. 8T-5436 M [1] BOLT (M10X1.5X130-MM)  
22. 8T-8549 M [1] LOCKNUT (M12X1.75-THD)  
23. 114-5333 [1] SWITCH AS-PRESSURE  
24. 9X-7378 [1] SEAL-O-RING  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP31880646
 

3E-1906: COMPRESSOR GP-REFRIGERANT

3E-1906 COMPRESSOR GP-REFRIGERANT
S/N BDM1-2000
PART OF 186-0512 COMPRESSOR GP-REFRIGERANT
i02741410 SEBP3188
3E1906 COMPRESSOR GP-REFRIGERANT Parts scheme
  For full view, you need register

Parts for your M315C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 180-9339 [2] PIN-CONNECTOR (14-GA TO 18-GA)  
2. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
3. 314-4018 [1] VALVE AS-PRESSURE RELIEF (REFRIGERANT COMPRESSOR)  
  9X-7378 [1] SEAL-O-RING  
4. 7T-4532 C [1] PLUG AS  
5. 9X-7385 C [2] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP31880647
 

198-4684: CONDENSER & MTG GP-REFRIGERANT

198-4684 CONDENSER & MTG GP-REFRIGERANT
S/N BDM1-2000
PART OF 207-0373 INSTALLATION AR-ENGINE
i01585412 SEBP3188
1984684 CONDENSER & MTG GP-REFRIGERANT Parts scheme
  For full view, you need register

Parts for your M315C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2S-2109 [1] BRACKET  
2. 9M-3835 [1] LATCH-RUBBER  
3. 9M-3838 [1] BRACKET  
4. 154-3153 [4] BOSS  
5. 198-4066 [2] BRACKET AS  
6. 198-4067 [1] PLATE  
7. 217-3086 Y [1] CONDENSER GP-REFRIGERANT  
8. 225-5970 [1] PLATE  
9. 129-3178 M [1] LOCKNUT (M6X1-THD)  
10. 5C-7261 M [2] NUT (M8X1.25-THD)  
11. 5C-9553 M [2] BOLT (M6X1X16-MM)  
12. 5P-4116 [12] WASHER-HARD (8.8X20.5X2-MM THK)  
13. 7X-2534 M [1] BOLT (M6X1X50-MM)  
14. 8T-4189 M [6] BOLT (M8X1.25X20-MM)  
15. 8T-4199 M [4] BOLT (M8X1.25X12-MM)  
16. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP31880648
 

217-3086: CONDENSER GP-REFRIGERANT

217-3086 CONDENSER GP-REFRIGERANT
S/N BDM1-2000
PART OF 198-4684 CONDENSER & MTG GP-REFRIGERANT
i01727808 SEBP3188
2173086 CONDENSER GP-REFRIGERANT Parts scheme
  For full view, you need register

Parts for your M315C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 121-4345 [1] SEAL-O-RING  
2. 196-9051 [1] CLAMP AS  
3. 196-9083 [1] ACCUMULATOR AS (REFRIGERANT)  
4. 198-4688 [1] COIL AS  
5. 217-2804 [1] CLIP  
6. 7X-2619 M [1] BOLT (M6X1X10-MM)  
7. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
 

#SEBP31880649
 

187-3767: CONSOLE GP-OPERATOR

187-3767 CONSOLE GP-OPERATOR -LH
S/N BDM1-466
PART OF 187-3797 CONSOLE GP-OPERATOR
i01621296 SEBP3188
1873767 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your M315C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 089-7436 [1] PIN-SPRING  
2. 109-2355 [1] HOUSING-SWITCH  
3. 109-2356 [1] PLUG  
4. 125-6084 [1] NUT-SPEED  
5. 194-7839 [1] SWITCH AS-POSITION (ARMREST)  
6. 194-7843 [1] MAGNET  
7. 195-7691 [1] LATCH AS  
8. 196-1120 Y [1] ARMREST GP (LH)  
9. 196-9061 [1] COVER  
10. 196-9062 [1] COVER  
11. 196-9063 [1] COVER  
12. 197-5681 [1] SPRING AS-GAS  
13. 201-8754 [1] BUMPER  
14. 201-8768 [1] KNOB  
15. 219-8487 [1] BRACKET AS  
16. 219-8488 [1] SUPPORT AS  
17. 219-8493 [1] ROD  
18. 089-7435 [1] CLEVIS  
19. 095-0723 M [4] SCREW-SPECIAL (M3X0.5X10-MM)  
20. 096-5962 [4] WASHER-HARD (3.4X7X0.8-MM THK)  
21. 125-6083 [1] SCREW-PAN HEAD  
22. 131-8203 M [2] SCREW-FLAT HEAD (M8X1.25X30-MM)  
23. 5C-7261 M [2] NUT (M8X1.25-THD)  
24. 5Y-0660 M [3] NUT (M6X1-THD)  
25. 8T-4138 M [4] BOLT (M6X1X20-MM)  
26. 8T-4171 M [2] BOLT (M6X1X12-MM)  
27. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
28. 8U-7803 M [1] SCREW  
29. 9X-2042 M [5] SCREW-TRUSS HEAD (M6X1X12-MM)  
30. 9X-8256 [6] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Windows - Clean
M313C and M315C Excavators
Overhead Guard - Inspect - If Equipped
M313C and M315C Excavators
Windows - Clean
M313C and M315C Excavators
Operator Station
M313C and M315C Excavators
Cab Visor - If Equipped
M313C and M315C Excavators
Cab Air Filter (Fresh Air) - Clean/Replace
M313C and M315C Excavators
Work Tool Control (One-Way Flow) - If Equipped
M313C and M315C Excavators
Work Tool Control (Two-Way Flow) - If Equipped
M313C and M315C Excavators
Operator Controls - Left Console
M313C and M315C Excavators
Operator Controls
M313C and M315C Excavators
Operator Controls - Right Instrument Panel
M313C and M315C Excavators
Work Tool Control - Bucket Circuit
M313C and M315C Excavators
Operator Controls - Left Console
M313C and M315C Excavators
Operator Controls - Right Instrument Panel
M313C and M315C Excavators
Special Instruction
Replacing Bonded Windows {7310}
Replacing Bonded Windows {7310}
Improving the Environment of the Operator{7301}
Improving the Environment of the Operator{7301}
Specifications
Cab Mounting
M315C Wheeled Hydraulic Excavator Machine System
Cab
M315C Wheeled Hydraulic Excavator Machine System
Disassembly and Assembly
Air Conditioner Cover - Remove and Install
M315C Excavator Machine Systems
Cab - Remove and Install
M315C Excavator Machine Systems
Service Magazine
Ordering a Replacement Operator Protective Structure (OPS) Certification Film {7323, 7325, 7405, 7557}
2009/04/20
Improved Procedure for the Retention of the Identification Film for the Roll Over Protective Structure (ROPS) and Falling Object Protective Structure (FOPS) {7323, 7325, 7405, 7557}
2009/07/27
A Procedure for Replacing Bonded Windows on All Caterpillar Products Is Now Available {7310}
2009/11/02

Caterpillar Parts SIS Catalog M315C :

187-3800 CAB AR
ARMREST GP
196-1120 ARMREST GP
ARMREST GP
196-1118 ARMREST GP
AIR CONDITIONER GP
210-1339 AIR CONDITIONER GP
AIR CONDITIONER GP
198-4686 AIR CONDITIONER GP
AIR CONDITIONER & MOUNTING GP
198-4685 AIR CONDITIONER & MOUNTING GP
505-4168 TIP-BUCKET
TIP GP-WIDE
505-4080 TIP GP-WIDE
188-4959 CAB GP
CAB GP
201-8750 CAB GP
CAB GP
201-8750 CAB GP
COIL GP-EVAPORATOR
217-2810 COIL GP-EVAPORATOR
COMPRESSOR GP-REFRIGERANT
186-0512 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
3E-1906 COMPRESSOR GP-REFRIGERANT
CONDENSER & MTG GP-REFRIGERANT
198-4684 CONDENSER & MTG GP-REFRIGERANT
CONDENSER GP-REFRIGERANT
217-3086 CONDENSER GP-REFRIGERANT

Truck sale:

 
60,631 USD 
Caterpillar M315C, Construction
- wheel excavator
BERGERAT MONNOYEUR SP. Z O.O.
Poland
Caterpillar M315C, Construction
68,079 
Caterpillar M315C, Construction
- wheel excavator
BERGERAT MONNOYEUR SP. Z O.O.
Poland
Caterpillar M315C, Construction
On Request 
Caterpillar M315C, Construction
- wheel excavator
ZEPPELIN BAUMASCHINEN
Germany
 
$46,884 USD 
CATERPILLAR M315C 2006
- WHEEL EXCAVATORS
BERGERAT MONNOYEUR POLAND
K. Kolumba 15 - Komorniki -
CATERPILLAR M315C 2005
$39,068 USD 
CATERPILLAR M315C 2005
- WHEEL EXCAVATORS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.