OPERATOR STATION
CONSOLE GPCONTROL GP-HYDRAULIC
CONTROL GP-JOYSTICK
MONITOR GP
PEDAL GP
OPERATOR STATION
CONSOLE GP
#SEBP31880650
187-3767: CONSOLE GP-OPERATOR
187-3767 CONSOLE GP-OPERATOR -LH
S/N BDM467-2000
PART OF 187-3797 CONSOLE GP-OPERATOR
S/N BDM467-2000
PART OF 187-3797 CONSOLE GP-OPERATOR
For full view, you need register
Parts for your M315C WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 089-7436 | [1] | PIN-SPRING | |
| 2. | 109-2355 | [1] | HOUSING-SWITCH | |
| 3. | 109-2356 | [1] | PLUG | |
| 4. | 125-6084 | [1] | NUT-SPEED | |
| 5. | 240-1366 C | [1] | SWITCH AS-POSITION (ARMREST) | |
| 6. | 194-7843 | [1] | MAGNET | |
| 7. | 195-7691 | [1] | LATCH AS | |
| 8. | 196-1120 Y | [1] | ARMREST GP (LH) | |
| 9. | 196-9061 | [1] | COVER | |
| 10. | 196-9062 | [1] | COVER | |
| 11. | 196-9063 | [1] | COVER | |
| 12. | 197-5681 | [1] | SPRING AS-GAS | |
| 13. | 201-8754 | [1] | BUMPER | |
| 14. | 201-8768 | [1] | KNOB | |
| 15. | 219-8487 | [1] | BRACKET AS | |
| 16. | 219-8488 | [1] | SUPPORT AS | |
| 17. | 219-8493 | [1] | ROD | |
| 18. | 089-7435 | [1] | CLEVIS | |
| 19. | 095-0723 M | [4] | SCREW-SPECIAL (M3X0.5X10-MM) | |
| 20. | 096-5962 | [4] | WASHER-HARD (3.4X7X0.8-MM THK) | |
| 21. | 125-6083 | [1] | SCREW-PAN HEAD | |
| 22. | 131-8203 M | [2] | SCREW-FLAT HEAD (M8X1.25X30-MM) | |
| 23. | 131-3540 M | [2] | LOCKNUT (M8X1.25-THD) | |
| 24. | 5Y-0660 M | [3] | NUT (M6X1-THD) | |
| 25. | 8T-4138 M | [4] | BOLT (M6X1X20-MM) | |
| 26. | 8T-4171 M | [2] | BOLT (M6X1X12-MM) | |
| 27. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 28. | 8U-7803 M | [1] | SCREW | |
| 29. | 9X-2042 M | [5] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| 30. | 9X-8256 | [6] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31880651
187-3782: CONSOLE GP-OPERATOR
187-3782 CONSOLE GP-OPERATOR -RH
S/N BDM1-2000
PART OF 187-3797 CONSOLE GP-OPERATOR
S/N BDM1-2000
PART OF 187-3797 CONSOLE GP-OPERATOR
For full view, you need register
Parts for your M315C WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 187-3772 | [1] | SUPPORT AS | |
| 2. | 196-1118 Y | [1] | ARMREST GP | |
| 3. | 196-9064 | [1] | COVER | |
| 4. | 196-9065 | [1] | COVER | |
| 5. | 196-9066 | [1] | COVER | |
| 6. | 197-5686 | [1] | COVER | |
| 7. | 125-6083 | [1] | SCREW-PAN HEAD | |
| 8. | 6R-7653 M | [2] | SCREW (M6X1X15-MM) | |
| 9. | 8T-3992 M | [4] | SCREW (M6X1X12-MM) | |
| 10. | 8U-7803 M | [4] | SCREW | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31880652
187-3797: CONSOLE GP-OPERATOR
For full view, you need register
Parts for your M315C WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 187-3767 Y | [1] | CONSOLE GP-OPERATOR (LH) | |
| 2. | 187-3782 Y | [1] | CONSOLE GP-OPERATOR (RH) | |
| 3. | 197-5687 | [1] | COVER | |
| 4. | 125-6083 | [1] | SCREW-PAN HEAD | |
| 5. | 5C-9553 M | [8] | BOLT (M6X1X16-MM) | |
| 6. | 8T-4138 M | [4] | BOLT (M6X1X20-MM) | |
| 7. | 9X-8256 | [12] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31880653
193-7789: CONTROL GP-HYDRAULIC HAND
193-7789 CONTROL GP-HYDRAULIC HAND -BLADE, STABILIZER
S/N BDM1-2000
PART OF 187-3793 CONTROL GP-PILOT OPERATED HYD
S/N BDM1-2000
PART OF 187-3793 CONTROL GP-PILOT OPERATED HYD
For full view, you need register
Parts for your M315C WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 116-4481 | [1] | PLATE | |
| 2. | 223-1394 | [1] | KIT-LEVER (HAND CONTROL) | |
| (INCLUDES BOLTS, COVER, LEVER, LEVER PIN & CAM) | ||||
| 3. | 8T-9534 M | [2] | BOLT (M6X1X50-MM) | |
| 4. | 131-0432 | [1] | KIT-SPRING (HAND CONTROL) | |
| (INCLUDES SPRINGS) | ||||
| 5. | 8U-5892 | [1] | BOOT | |
| 6. | 201-2484 | [2] | KIT-REGULATOR (HAND CONTROL) | |
| 7. | 201-2485 | [2] | KIT-PLUNGER (HAND CONTROL) | |
| (EACH INCLUDES PLUNGER GUIDE, HOLLOW PLUNGER, WASHER, STANDARD PLATE & SNAP RING) | ||||
| 8. | 116-4484 | [1] | HANDLE | |
| M | METRIC PART | |||
#SEBP31880654
112-5699: CONTROL GP-HYDRAULIC PEDAL
112-5699 CONTROL GP-HYDRAULIC PEDAL -TRAVEL
S/N BDM1-2000
PART OF 188-4972 CONTROL GP-PEDAL
AN ATTACHMENT
S/N BDM1-2000
PART OF 188-4972 CONTROL GP-PEDAL
AN ATTACHMENT
For full view, you need register
Parts for your M315C WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 201-1357 | [1] | KIT-PLATE (PEDAL) | |
| (ALSO INCLUDES PARTS MARKED N IN GRAPHIC) | ||||
| 2. | 117-8699 | [1] | WASHER (12.1X24X1.95-MM THK) | |
| 3. | 107-2723 M | [1] | BOLT-SOCKET HEAD (M12X1.75X20-MM) | |
| 4. | 201-0533 | [1] | KIT-BELLOWS (PEDAL) | |
| (INCLUDES BELLOWS) | ||||
| 5. | 223-1445 | [1] | PEDAL | |
| 6. | 201-0502 L | [1] | KIT-PEDAL | |
| (ALSO INCLUDES PARTS MARKED H IN GRAPHIC) | ||||
| 7. | 116-1119 M | [1] | SETSCREW | |
| 8. | 5P-7970 LM | [2] | NUT (M8X1.25-THD) | |
| 9. | 201-0901 | [1] | KIT-SPRING | |
| (INCLUDES SPRING) | ||||
| 10. | 126-8059 | [1] | CAP-PLASTIC | |
| 11. | 201-1376 | [2] | KIT-REGULATOR (PEDAL) | |
| 12. | 201-1373 | [2] | KIT-PLUNGER (PEDAL) | |
| (EACH INCLUDES PLUNGER, WASHER, PLATER, SNAP RING & BELLOW) | ||||
| 14. | 116-1132 J | [1] | BOOT | |
| 15. | 5C-2890 JM | [2] | NUT (M6X1-THD) | |
| 16. | 5W-1341 JM | [1] | BOLT-SOCKET HEAD (M8X1.25X16-MM) | |
| 17. | 117-8683 J | [1] | PIN-SPRING | |
| 18. | 129-4508 | [1] | COIL AS | |
| 19. | 7X-2619 JM | [2] | BOLT (M6X1X10-MM) | |
| 20. | 8C-6364 JM | [2] | BOLT-SOCKET HEAD (M5X0.8X14-MM) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 201-1395 J | [1] | KIT-PEDAL (HYDRAULIC PEDAL CONTROL) | ||
| (ALSO INCLUDES PARTS MARKED P IN GRAPHIC)) | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| L | KIT MARKED L SERVICES PART(S) MARKED L | |||
| M | METRIC PART | |||
#SEBP31880655
112-5704: CONTROL GP-HYDRAULIC PEDAL
112-5704 CONTROL GP-HYDRAULIC PEDAL
S/N BDM1-2000
PART OF 198-4680 OPERATOR AR, 187-7375, 187-7376, 187-7378 VALVE & LINES GP-AUXILIARY
ALSO AN ATTACHMENT
S/N BDM1-2000
PART OF 198-4680 OPERATOR AR, 187-7375, 187-7376, 187-7378 VALVE & LINES GP-AUXILIARY
ALSO AN ATTACHMENT
For full view, you need register
Parts for your M315C WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 201-0895 | [1] | KIT-PLATE (PEDAL CONTROL) | |
| (INCLUDES BUSHINGS & PLATE) | ||||
| 2. | 117-8699 | [1] | WASHER (12.1X24X1.95-MM THK) | |
| 3. | 107-2723 M | [1] | BOLT-SOCKET HEAD (M12X1.75X20-MM) | |
| 4. | 201-0901 | [1] | KIT-SPRING (PEDAL CONTROL) | |
| (INCLUDES SPRINGS) | ||||
| 5. | 117-8700 | [1] | PEDAL | |
| 6. | 201-0502 J | [1] | KIT-PEDAL (PEDAL CONTROL) | |
| (INCLUDES SCREWS, NUTS & PEDAL AXIS) | ||||
| 7. | 116-1119 JM | [1] | SETSCREW | |
| 8. | 5P-7970 M | [2] | NUT (M8X1.25-THD) | |
| 9. | 242-1979 | [2] | KIT-REGULATOR (WITH SPRING)(PEDAL CONTROL) | |
| (INCLUDES WASHER RETAINER, SPRING RETAINER, SPRING, SHIMS, & SPOOL) | ||||
| 10. | 126-8059 | [1] | CAP-PLASTIC | |
| 11. | 242-1978 | [2] | KIT-PLUNGER (PEDAL) | |
| (INCLUDES PLUNGER, PLUNGER GUIDE, WASHER, PLATER, SNAP RING & PROTECTING CAP) | ||||
| 12. | 201-0533 | [1] | KIT-BELLOWS (PEDAL CONTROL) | |
| (INCLUDES BELLOWS) | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
#SEBP31880656
222-6205: CONTROL GP-JOYSTICK
222-6205 CONTROL GP-JOYSTICK
S/N BDM1-2000
PART OF 187-3793 CONTROL GP-PILOT OPERATED HYD
S/N BDM1-2000
PART OF 187-3793 CONTROL GP-PILOT OPERATED HYD
For full view, you need register
Parts for your M315C WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 136-1206 | [1] | CONTROL GP-HANDLE (JOYSTICK)(LH/RH) | |
| 2. | 122-1905 | [1] | BELLOWS | |
| 3. | 151-4522 | [1] | KIT-LEVER (JOYSTICK CONTROL) | |
| (INCLUDES NUT, LEVER & PIN) | ||||
| 4. | 198-1016 | [1] | KIT-JOINT (JOYSTICK CONTROL) | |
| (INCLUDES SHIMS & CARDAN) | ||||
| 5. | 122-1904 | [1] | PLATE | |
| 6. | 207-5209 | [1] | KIT-PLUNGER (JOYSTICK CONTROL) | |
| (INCLUDES PLUNGERS, PLUNGER GUIDES, PLATERS & SNAP RINGS) | ||||
| 7. | 205-4015 | [1] | KIT-PLUNGER (JOYSTICK CONTROL) | |
| (INCLUDES PLUNGERS, PLUNGER GUIDES, PLATERS & SNAP RINGS) | ||||
| 8. | 9T-2837 | [1] | KIT-SEAL (VALVE)(JOYSTICK CONTROL) | |
| (INCLUDES RINGS, PINS & BOLT) | ||||
| 9. | 260-7505 | [2] | KIT-PLUNGER VALVE (JOYSTICK CTL, PORT 2, PORT 4) | |
| (INCLUDES RETAINER-WASHER, RETAINER-SPRING, SPRINGS, SHIMS, SPOOL, & PIN) | ||||
| 10. | 260-7506 | [2] | KIT-PLUNGER VALVE (JOYSTICK CTL, PORT 1, PORT 2) | |
| (INCLUDES RETAINER-WASHER, RETAINER-SPRING, SPRINGS, SHIMS, SPOOL, & PIN) | ||||
| 11. | 205-5690 | [1] | SPRING | |
#SEBP31880657
243-7058: CONTROL GP-MONITOR
243-7058 CONTROL GP-MONITOR
S/N BDM1-2000
PART OF 262-6996 SERVICE GP-MONITOR
ALSO AN ATTACHMENT
S/N BDM1-2000
PART OF 262-6996 SERVICE GP-MONITOR
ALSO AN ATTACHMENT
For full view, you need register
Parts for your M315C WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 228-8954 | [1] | PLATE | |
| 2. | 228-8955 | [1] | PLATE | |
| 3. | 228-8957 | [1] | PLATE | |
| 4. | 228-8958 | [1] | PLATE | |
| 5. | 111-4627 M | [4] | SCREW-MACHINE (M6X1X30-MM) | |
| 6. | 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | |
| (INCULEDS RECEPTACLE AS & WEDGE) | ||||
| 7. | 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 8. | 186-3735 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| M | METRIC PART | |||
#SEBP31880658
188-4972: CONTROL GP-PEDAL
For full view, you need register
Parts for your M315C WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | |
| 2. | 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 3. | 112-5699 Y | [1] | CONTROL GP-HYDRAULIC PEDAL (TRAVEL) | |
| 4. | 175-3349 | [1] | RECEPTACLE AS | |
| 5. | 193-9191 | [1] | BRACKET | |
| 6. | 194-7839 | [1] | SWITCH AS-POSITION (TRAVEL LOCK) | |
| 7. | 194-7843 | [1] | MAGNET | |
| 8. | 095-0723 M | [2] | SCREW-SPECIAL (M3X0.5X10-MM) | |
| 9. | 096-5962 | [2] | WASHER-HARD (3.4X7X0.8-MM THK) | |
| 10. | M | [2] | SCREW (M3X0.5X8-MM) | |
| 11. | 3C-6969 M | [2] | NUT (M3X0.5-THD) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31880659
188-4972: CONTROL GP-PEDAL
For full view, you need register
Parts for your M315C WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | |
| 2. | 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 3. | 112-5699 Y | [1] | CONTROL GP-HYDRAULIC PEDAL (TRAVEL) | |
| 4. | 175-3349 | [1] | RECEPTACLE AS | |
| 5. | 193-9191 | [1] | BRACKET | |
| 6. | 240-1366 C | [1] | SWITCH AS-POSITION (TRAVEL LOCK) | |
| 7. | 194-7843 C | [1] | MAGNET | |
| 8. | 095-0723 M | [2] | SCREW-SPECIAL (M3X0.5X10-MM) | |
| 9. | 096-5962 | [2] | WASHER-HARD (3.4X7X0.8-MM THK) | |
| 10. | M | [2] | SCREW (M3X0.5X8-MM) | |
| 11. | 3C-6969 M | [2] | NUT (M3X0.5-THD) | |
| 12. | 8C-8580 M | [2] | BOLT-SOCKET HEAD (M5X0.8X16-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
OPERATOR STATION
CONSOLE GP
Operation and Maintenance Manual
Technical Information Bulletin
Troubleshooting
MID 039 - CID 1628 - FMI 04
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System
MID 039 - CID 1628 - FMI 05
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System
Disassembly and Assembly
Caterpillar Parts SIS Catalog M315C :
Truck sale:
$46,884 USD
$39,068 USD