261-0378 SWIVEL GP-ELECTRIC S/N BDY365-2000 PART OF 188-4954 WIRING GP-UNDERCARRIAGE/SWIVEL ALSO AN ATTACHMENT M322C

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 261-0378 SWIVEL GP-
1. 187-3799 WIRING GP-
2. 187-3799 WIRING GP-
3. 221-9037 WIRING GP-
4. 202-1131 WIRING GP-
5. 202-1133 WIRING GP-
6. 202-1133 WIRING GP-
7. 202-1133 WIRING GP-
8. 187-3798 WIRING GP-
9. 217-9151 WIRING GP-
0. INFORMATION

WHEELED EXCAVATOR M322C WHEELED EXCAVATOR BDY
M322C Excavator BDY00001-02000 (MACHINE) POWERED BY 3056 Engine SEBP3190 M322C BDY (2003)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

186-0483 BATTERY & WIRING GP

195-0704 SWIVEL GP-ELECTRIC

261-0378 SWIVEL GP-ELECTRIC

187-3799 WIRING GP-CAB

221-9037 WIRING GP-CAB

#SEBP31900150

261-0378: SWIVEL GP-ELECTRIC

SWIVEL GP-ELECTRIC

261-0378 SWIVEL GP-ELECTRIC
S/N BDY365-2000
PART OF 188-4954 WIRING GP-UNDERCARRIAGE/SWIVEL
ALSO AN ATTACHMENT

i02193975 SEBP3190

For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	261-1936	[1]	COVER
2.	201-8225	[5]	BRACKET AS
3.	195-9770	[1]	SEAL-O-RING
4.	242-8819	[1]	PLUG AS
5.	5C-8312 M	[3]	NUT (M4X0.7-THD)
6.	4F-2318	[3]	LOCKWASHER
7.	129-3174 M	[4]	BOLT-SOCKET HEAD (M4X0.7X60-MM)
8.	096-6166	[4]	WASHER-HARD (4.5X9X1-MM THK)
9.	5C-2874 M	[2]	NUT (M5X0.8-THD)
10.	5C-2891	[2]	WASHER
11.	186-3736	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
12.	186-3735	[5]	PIN-CONNECTOR (16-GA TO 18-GA)
13.	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
14.	8T-8737	[1]	PLUG-SEAL
	M		METRIC PART

#SEBP31900151

187-3799: WIRING GP-CAB

WIRING GP-CAB

187-3799 WIRING GP-CAB
S/N BDY1-275
PART OF 187-3800 CAB AR, 188-4959 CAB GP
ALSO AN ATTACHMENT

i01536783 SEBP3190

For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6C-3431	[1]	ANTENNA
2.	9W-1494	[1]	KIT-SERVICE METER (24-VOLT)
			(INCLUDES METER & FILM)
3.	8C-6354	[1]	CAP-RECEPTACLE (ET CONNECTOR)
4.	109-2353	[11]	HOUSING
5.	109-2354	[4]	HOUSING
6.	109-2356	[11]	PLUG
7.	120-5967	[1]	SOCKET-WIRING
8.	167-3593	[1]	STRAP
9.	176-2002	[1]	CAP
10.	190-8664	[1]	SWITCH GP-LIMIT (WINDOW LOWER LIMIT)
	7Y-3950	[2]	TERMINAL-BLADE (14-GA TO 20-GA)
	7Y-3953	[1]	CONNECTOR-RECEPTACLE
11.	193-9056	[1]	SWITCH AS-ROCKER (HAZARD WARNING LIGHTS)
	111-7899	[1]	GASKET
12.	193-9057	[1]	SWITCH AS-ROCKER (HEADLIGHT)
	111-7899	[1]	GASKET
13.	193-9058	[1]	SWITCH AS-ROCKER (FRONT FLOOD LAMP)
	111-7899	[1]	GASKET
14.	232-5325	[1]	HARNESS AS-CAB
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[4]	KIT-CONNECTING PLUG (8-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(EACH CONNECTING PLUG KIT INCLUDES PLUG AS & WEDGE)
15.	193-9065	[1]	SWITCH AS-ROCKER (WARNING BEACON)
	111-7899	[1]	GASKET
16.	195-7697	[1]	PLATE
17.	201-4013	[1]	HARNESS AS-CAB (SERVICE CONNECTOR)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
18.	217-9535 Y	[1]	ELECTRONICS GP-MACHINE (SOFT SWITCH PANEL)
19.	226-5444	[1]	BRACKET
20.	096-0061 B	[5]	STRAP-CABLE
21.	096-0192	[1]	LOCKWASHER (EXTERNAL TOOTH)
22.	120-0090	[4]	WASHER (3.2X7X0.5-MM THK)
23.	120-9027 M	[4]	SCREW-PAN HEAD (M3X0.5X16-MM)
24.	3C-6969 M	[4]	NUT (M3X0.5-THD)
25.	3F-9556	[1]	LOCKWASHER
26.	5C-7261 M	[1]	NUT (M8X1.25-THD)
27.	5P-4116	[2]	WASHER-HARD (8.8X20.5X2-MM THK)
28.	7X-0575	[1]	WASHER-HARD (10.2X22.5X5-MM THK)
29.	8T-0287 M	[1]	BOLT (M5X0.8X10-MM)
30.	8T-3016	[1]	WASHER (5.3X10X1-MM THK)
31.	8U-7803 M	[4]	SCREW
32.	9W-0335	[1]	LIGHTER AS-CIGAR (24-VOLT)
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP31900152

187-3799: WIRING GP-CAB

WIRING GP-CAB

187-3799 WIRING GP-CAB
S/N BDY276-2000
PART OF 187-3800 CAB AR, 188-4959 CAB GP
ALSO AN ATTACHMENT

i02055918 SEBP3190

For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9W-1494	[1]	KIT-SERVICE METER (24-VOLT)
			(INCLUDES METER, FILM, CABLE & WIRE ASSEMBLIES)
2.	8C-6354	[1]	CAP-RECEPTACLE (ET CONNECTOR)
3.	109-2353	[11]	HOUSING
4.	109-2354	[4]	HOUSING
5.	109-2356 C	[12]	PLUG
6.	167-3593	[1]	STRAP
7.	176-2002	[1]	CAP
8.	190-8664	[1]	SWITCH GP-LIMIT (WINDOW LOWER LIMIT)
	7Y-3950	[2]	TERMINAL-BLADE (14-GA TO 20-GA)
	7Y-3953	[1]	CONNECTOR-RECEPTACLE
9.	193-9056	[1]	SWITCH AS-ROCKER (HAZARD WARNING LIGHTS)
	111-7899	[1]	GASKET
10.	193-9057	[1]	SWITCH AS-ROCKER (HEADLIGHT)
	111-7899	[1]	GASKET
11.	193-9058	[1]	SWITCH AS-ROCKER (FLOOD LAMP, FRONT)
	111-7899	[1]	GASKET
12.	195-7697	[1]	PLATE
13.	201-4013	[1]	HARNESS AS-CAB (SERVICE CONNECTOR)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[3]	PLUG-SEAL
14.	226-5444	[1]	BRACKET
15.	232-5325	[1]	HARNESS AS-CAB
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	8L-8413	[24]	STRAP-CABLE (WHITE)
	8T-8730	[25]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[5]	PLUG-SEAL
	9W-0844	[3]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	9X-3402	[17]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[4]	KIT-CONNECTING PLUG (8-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
16.	217-9535 CY	[1]	ELECTRONICS GP-MACHINE (SOFT SWITCH PANEL)
17.	096-0061	[5]	STRAP-CABLE
18.	120-0090	[4]	WASHER (3.2X7X0.5-MM THK)
19.	120-9027 M	[4]	SCREW-PAN HEAD (M3X0.5X16-MM)
20.	3C-6969 M	[4]	NUT (M3X0.5-THD)
21.	3F-9556	[1]	LOCKWASHER
22.	5C-7261 M	[1]	NUT (M8X1.25-THD)
23.	5P-4116	[2]	WASHER-HARD (8.8X20.5X2-MM THK)
24.	8T-0287 M	[1]	BOLT (M5X0.8X10-MM)
25.	8T-3016	[1]	WASHER (5.3X10X1-MM THK)
26.	8U-7803 M	[4]	SCREW
27.	9W-0335	[1]	LIGHTER AS-CIGAR (24-VOLT)
28.	240-8786	[1]	ANTENNA AS
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP31900153

221-9037: WIRING GP-CAB

WIRING GP-CAB

221-9037 WIRING GP-CAB -FRONT WINDOW, 1-PIECE
S/N BDY1-2000
PART OF 219-8500 CAB AR
AN ATTACHMENT

i01745676 SEBP3190

For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	215-2913	[1]	GROMMET
2.	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(4CM)
2A.	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(4CM)
	E		ORDER BY THE CENTIMETER

#SEBP31900154

202-1131: WIRING GP-CHASSIS

WIRING GP-CHASSIS

202-1131 WIRING GP-CHASSIS
S/N BDY1-2000
PART OF 217-9570 CHASSIS AR

i01762150 SEBP3190

For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5W-1992	[4]	TERMINAL
2.	5W-2005	[1]	HOUSING
3.	5W-6315	[1]	FITTING
4.	104-6692	[2]	RECEPTACLE AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[2]	PLUG-SEAL
5.	120-5967	[1]	SOCKET-WIRING
6.	127-0833	[1]	TANK AS-WINDOW WASHER
	7T-8891	[1]	PUMP AS-WASHER
	8E-8292	[1]	CAP-VENTED (WINDOW WASHER)
	8E-8293	[1]	GROMMET
7.	132-1805	[1]	STRAP AS-GROUND
8.	137-4195	[1]	CAP
9.	147-0934	[1]	DIODE AS
10.	147-1380	[1]	SWITCH AS-FOOT (HORN)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
11.	193-9062	[1]	SWITCH AS-ROCKER (HYDRAULIC CAB RISER)
	111-7899	[1]	GASKET
12.	194-3592	[1]	SWITCH AS (HORN/LIGHTS/WIPER)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[14]	PIN-CONNECTOR (16-GA TO 18-GA)
13.	195-7873	[1]	BRACKET
14.	198-6219	[1]	HARNESS AS-CONSOLE
15.	202-1132	[1]	HARNESS AS (CHASSIS)
16.	207-5153	[1]	RECEPTACLE AS
17.	214-0862	[1]	RECEPTACLE AS
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[6]	PLUG-SEAL
18.	215-5564	[1]	SUPPRESSOR-ARC
19.	096-0061 B	[32]	STRAP-CABLE
20.	099-2374 M	[2]	BOLT-SOCKET HEAD (M5X0.8X12-MM)
21.	129-3178 M	[1]	LOCKNUT (M6X1-THD)
22.	3F-9556	[3]	LOCKWASHER
23.	4P-7429	[1]	CLIP (LADDER)
24.	4P-8134	[2]	CLIP (LADDER)
25.	5C-7261 M	[3]	NUT (M8X1.25-THD)
26.	5P-4116	[6]	WASHER-HARD (8.8X20.5X2-MM THK)
27.	6V-4298 M	[2]	BOLT (M5X0.8X16-MM)
28.	8T-3016	[4]	WASHER (5.3X10X1-MM THK)
29.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
30.	8T-4199 M	[2]	BOLT (M8X1.25X12-MM)
31.	9X-8256	[1]	WASHER (6.6X12X2-MM THK)
32.	128-1423 BE		SEAL
33.	207-5141 BE		SEAL

	217-3403 EF		SEAL (17CM)
	144-0195 EF		HOSE (370CM)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	F		NOT SHOWN
	M		METRIC PART

#SEBP31900155

202-1133: WIRING GP-CHASSIS

WIRING GP-CHASSIS

202-1133 WIRING GP-CHASSIS -ELECTRONIC-HYDRAULIC CAB RISER
S/N BDY1-346
PART OF 217-9570 CHASSIS AR

i01770742 SEBP3190

For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	104-6692	[2]	RECEPTACLE AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[2]	PLUG-SEAL
2.	137-4195	[1]	CAP
3.	202-1134	[1]	HARNESS AS-CHASSIS (ELECTRONIC)
4.	210-0396	[1]	PLUG AS-CODE (MONITOR)(CRANK WITHOUT INJECT)
5.	213-9100	[1]	ALARM AS (BACKUP)(BACKUP)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(KIT INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (31-CM)
6.	214-0861	[2]	RECEPTACLE GP-AUXILIARY START
			(EACH INCLUDES)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[3]	PLUG-SEAL
7.	214-0862	[2]	RECEPTACLE AS
			(EACH INCLUDES)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[6]	PLUG-SEAL
8.	214-0863	[1]	RECEPTACLE GP-AUXILIARY START
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[8]	PLUG-SEAL
9.	219-5762	[1]	HARNESS AS-SENSOR
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
10.	096-0192	[1]	LOCKWASHER (EXTERNAL TOOTH)
11.	129-3178 M	[1]	LOCKNUT (M6X1-THD)
12.	134-2540	[1]	RECEPTACLE AS-CONNECTOR
13.	4P-8134	[3]	CLIP (LADDER)
14.	5C-2874 M	[1]	NUT (M5X0.8-THD)
15.	5C-7261 M	[2]	NUT (M8X1.25-THD)
16.	6D-4244	[1]	CLIP (LOOP)
17.	8T-4189 M	[2]	BOLT (M8X1.25X20-MM)
18.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
19.	8T-4224	[3]	WASHER-HARD (8.8X16X2-MM THK)
20.	9D-3768	[1]	GROMMET
21.	9X-8256	[1]	WASHER (6.6X12X2-MM THK)
22.	096-0061 B	[10]	STRAP-CABLE
23.	5P-4116	[2]	WASHER-HARD (8.8X20.5X2-MM THK)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP31900156

202-1133: WIRING GP-CHASSIS

WIRING GP-CHASSIS

202-1133 WIRING GP-CHASSIS -ELECTRONIC-HYDRAULIC CAB RISER
S/N BDY347-374
PART OF 217-9570 CHASSIS AR

i02125678 SEBP3190

For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	104-6692	[2]	RECEPTACLE AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[2]	PLUG-SEAL
2.	137-4195	[1]	CAP
3.	202-1134	[1]	HARNESS AS-CHASSIS
4.	210-0396	[1]	PLUG AS-CODE (MONITOR)(CRANK WITHOUT INJECT)
5.	213-9100	[1]	ALARM AS (BACKUP)(BACKUP)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(KIT INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (31-CM)
6.	214-0861	[2]	RECEPTACLE GP-AUXILIARY START
			(EACH INCLUDES)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[3]	PLUG-SEAL
7.	214-0862	[2]	RECEPTACLE AS
			(EACH INCLUDES)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[6]	PLUG-SEAL
8.	214-0863	[1]	RECEPTACLE GP-AUXILIARY START
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[8]	PLUG-SEAL
9.	219-5762	[1]	HARNESS AS-SENSOR
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
10.	096-0192	[1]	LOCKWASHER (EXTERNAL TOOTH)
11.	129-3178 M	[1]	LOCKNUT (M6X1-THD)
12.	134-2540	[1]	RECEPTACLE AS-CONNECTOR
13.	4P-8134	[3]	CLIP (LADDER)
14.	5C-2874 M	[1]	NUT (M5X0.8-THD)
15.	5C-7261 M	[2]	NUT (M8X1.25-THD)
16.	6D-4244	[1]	CLIP (LOOP)
17.	8T-4189 M	[2]	BOLT (M8X1.25X20-MM)
18.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
19.	8T-4224	[3]	WASHER-HARD (8.8X16X2-MM THK)
20.	9D-3768	[1]	GROMMET
21.	9X-8256	[1]	WASHER (6.6X12X2-MM THK)
22.	096-0061 B	[10]	STRAP-CABLE
23.	5P-4116	[2]	WASHER-HARD (8.8X20.5X2-MM THK)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP31900157

202-1133: WIRING GP-CHASSIS

WIRING GP-CHASSIS

202-1133 WIRING GP-CHASSIS -ELECTRONIC-HYDRAULIC CAB RISER
S/N BDY375-2000
PART OF 217-9570 CHASSIS AR

i02209344 SEBP3190

For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	104-6692	[2]	RECEPTACLE AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[2]	PLUG-SEAL
2.	137-4195	[1]	CAP
3.	163-6758 C	[1]	WIRE AS (ENGINE OIL LEVEL)
4.	202-1134	[1]	HARNESS AS-CHASSIS
5.	210-0396	[1]	PLUG AS-CODE (MONITOR)(CRANK WITHOUT INJECT)
6.	213-9100	[1]	ALARM AS (BACKUP)(BACKUP)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(KIT INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 BE		SLEEVE
7.	214-0861	[2]	RECEPTACLE GP-AUXILIARY START
			(EACH INCLUDES)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[3]	PLUG-SEAL
8.	214-0862	[2]	RECEPTACLE AS
			(EACH INCLUDES)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[6]	PLUG-SEAL
9.	214-0863	[1]	RECEPTACLE GP-AUXILIARY START
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[8]	PLUG-SEAL
10.	219-5762	[1]	HARNESS AS-SENSOR
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(KIT INCLUDES RECPETACLE AS & WEDGE)
11.	096-0192	[1]	LOCKWASHER (EXTERNAL TOOTH)
12.	129-3178 M	[1]	LOCKNUT (M6X1-THD)
13.	134-2540	[1]	RECEPTACLE AS-CONNECTOR
14.	4P-8134	[3]	CLIP (LADDER)
15.	5C-2874 M	[1]	NUT (M5X0.8-THD)
16.	5C-7261 M	[2]	NUT (M8X1.25-THD)
17.	5P-4116	[2]	WASHER-HARD (8.8X20.5X2-MM THK)
18.	6D-4244	[1]	CLIP (LOOP)
19.	8T-4189 M	[2]	BOLT (M8X1.25X20-MM)
20.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
21.	8T-4224	[3]	WASHER-HARD (8.8X16X2-MM THK)
22.	9D-3768	[1]	GROMMET
23.	9X-8256	[1]	WASHER (6.6X12X2-MM THK)
24.	096-0061 B	[10]	STRAP-CABLE
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP31900158

187-3798: WIRING GP-CONSOLE

WIRING GP-CONSOLE

187-3798 WIRING GP-CONSOLE
S/N BDY1-2000
PART OF 217-9573 OPERATOR AR

i01536725 SEBP3190

For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5W-1992	[6]	TERMINAL
2.	5W-9665	[1]	HOUSING-PLUG
3.	7Y-3950	[2]	TERMINAL-BLADE (14-GA TO 20-GA)
4.	7Y-3953	[1]	CONNECTOR-RECEPTACLE
5.	9G-7641 Y	[1]	SWITCH GP-START (ENGINE, KEY)
6.	106-0107	[1]	SWITCH GP-ROTARY (THROTTLE POSITION)
	3E-3383	[1]	WEDGE-RECEPTACLE LOCK (6-PIN)
	7Y-5458 M	[1]	NUT (M12X1-THD)
	7Y-5464	[1]	WASHER (12.2X15.4X0.5-MM THK)
	8T-8737	[1]	PLUG-SEAL
	106-0210	[1]	SEAL
	144-1636	[5]	PIN-CONNECTOR (14-GA TO 18-GA)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
7.	113-3453	[1]	KNOB AS
8.	228-7974	[1]	HARNESS AS-CONSOLE (RH)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH CONNECTING PLUG KIT INCLUDES PLUG AS & WEDGE
	8T-8737	[2]	PLUG-SEAL
9.	193-9054	[1]	SWITCH AS (CONTROLLER BACKUP)
10.	200-2555	[1]	PANEL
11.	200-2556	[1]	PLATE
12.	202-0197	[1]	HARNESS AS-CONSOLE (LH)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS & WEDGE)
13.	220-5815	[6]	SCREW-PAN HEAD
14.	096-0061 B	[6]	STRAP-CABLE
15.	096-6166	[2]	WASHER-HARD (4.5X9X1-MM THK)
16.	097-5812	[1]	SPACER (26X32X2-MM THK)
17.	8T-0337 M	[2]	SCREW-MACHINE (M4X0.7X12-MM)
18.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP31900159

217-9151: WIRING GP-ENGINE

WIRING GP-ENGINE

217-9151 WIRING GP-ENGINE
S/N CPT1-10865
PART OF 188-5098 ENGINE AR-PRIMARY

i01694732 SEBP3190

For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	100-4458 M	[3]	BOLT (M8X1.25X14-MM)
2.	100-4830 M	[2]	BOLT (M10X1.5X20-MM)
3.	124-3815 M	[1]	BOLT (M8X1.25X16-MM)
4.	140-8783 M	[1]	BOLT (M10X1.5X45-MM)
5.	216-9086	[1]	SPACER (10.5X20X32-MM THK)
6.	217-8477	[3]	CLIP
7.	217-9038	[3]	BOLT (M4X0.7X14-MM)
8.	217-9039	[3]	STRAP-CABLE
9.	217-9041	[1]	BRACKET-MOUNTING
10.	224-8637	[1]	HARNESS AS-ENGINE (ENGINE ECM)
11.	226-8778	[1]	BRACKET
12.	226-8780	[1]	BRACKET
13.	228-7477	[1]	CLIP
	M		METRIC PART

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Battery - Recycle
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers

Service Hour Meter
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers

Battery Disconnect Switch
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers

Power Receptacle
M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers

Window Wiper and Washer Control
M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers

Engine Starting with Jump Start Cables - If Equipped
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers

Quick Coupler Control - If Equipped
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers

Battery or Battery Cable - Inspect/Replace
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers

Engine Starting with Jump Start Cables
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers

Fuses - Replace
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers

Engine Start Switch
M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers

Automatic Lubrication System Control - If Equipped
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers

Automatic Lubrication System Control - If Equipped
M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers

Joystick Steering - If Equipped
M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers

Fuses - Replace
M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Installation Procedures for the Generator{1404, 1408, 4450, 5061}
Installation Procedures for the Generator{1404, 1408, 4450, 5061}

AMPSEAL 16 ConnectorSystem{7553}
AMPSEAL 16 ConnectorSystem{7553}

Field Installation of Medium Pressure Valve Group with Joystick Steering{1408, 5057, 5059, 5705}
Field Installation of Medium Pressure Valve Group with Joystick Steering{1408, 5057, 5059, 5705}

Installation Procedure for the Control Box for the 12.5 kW Generator{1404, 1408, 4450, 7426, 7451}
Installation Procedure for the Control Box for the 12.5 kW Generator{1404, 1408, 4450, 7426, 7451}

Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REPLACING THE ACTIVE MEDIUM PRESSURE FUNCTION SELECTOR SWITCH ON CERTAIN M313C, M315C, M316C, M318C, M322C WHEELED EXCAVATORS AND M322C MATERIAL HANDLERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ACTIVE MEDIUM PRESSURE FUNCTION SELECTOR SWITCH ON CERTAIN M313C, M315C, M316C, M318C, M322C WHEELED EXCAVATORS AND M322C MATERIAL HANDLERS

PRODUCT IMPROVEMENT PROGRAM TO IMPROVE THE HARNESS ROUTING ON CERTAIN M322C WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM TO IMPROVE THE HARNESS ROUTING ON CERTAIN M322C WHEELED EXCAVATORS

Service Letter-Australia

PRODUCT IMPROVEMENT PROGRAM TO IMPROVE THE HARNESS ROUTING ON CERTAIN M322C WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM TO IMPROVE THE HARNESS ROUTING ON CERTAIN M322C WHEELED EXCAVATORS

Service Letter-CFEL

PRODUCT IMPROVEMENT PROGRAM TO IMPROVE THE HARNESS ROUTING ON CERTAIN M322C WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM TO IMPROVE THE HARNESS ROUTING ON CERTAIN M322C WHEELED EXCAVATORS

Service Letter-CSARL

PRODUCT IMPROVEMENT PROGRAM TO IMPROVE THE HARNESS ROUTING ON CERTAIN M322C WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM TO IMPROVE THE HARNESS ROUTING ON CERTAIN M322C WHEELED EXCAVATORS

Service Letter-Americas

PRODUCT IMPROVEMENT PROGRAM TO IMPROVE THE HARNESS ROUTING ON CERTAIN M322C WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM TO IMPROVE THE HARNESS ROUTING ON CERTAIN M322C WHEELED EXCAVATORS

Technical Information Bulletin

C Series Wheeled Excavator Wire Harness is Wearing
C Series Wheeled Excavator Wire Harness is Wearing

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Service Letter-China

PRODUCT IMPROVEMENT PROGRAM TO IMPROVE THE HARNESS ROUTING ON CERTAIN M322C WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM TO IMPROVE THE HARNESS ROUTING ON CERTAIN M322C WHEELED EXCAVATORS

Service Letter-Asia

PRODUCT IMPROVEMENT PROGRAM TO IMPROVE THE HARNESS ROUTING ON CERTAIN M322C WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM TO IMPROVE THE HARNESS ROUTING ON CERTAIN M322C WHEELED EXCAVATORS

Systems Operation

Relays
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

Switches
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

Monitoring System
M318C and M322C Excavators Magnet Controller

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Letter-APD

PRODUCT IMPROVEMENT PROGRAM TO IMPROVE THE HARNESS ROUTING ON CERTAIN M322C WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM TO IMPROVE THE HARNESS ROUTING ON CERTAIN M322C WHEELED EXCAVATORS

Testing and Adjusting

System Schematic
Machine Security System

Electric Starting System - Test
3056E Engines for Caterpillar Built Machines

Wiring Harness (Open Circuit) - Test
Product Link 151/201

Electrical Connector - Inspect
Product Link 151/201

Wiring Harness (Short Circuit) - Test
Product Link 151/201

Wiring Harness (Short Circuit) - Test
Product Link - PL102C

Wiring Harness (Open Circuit) - Test
Product Link - PL102C

Electrical Connector - Inspect
Product Link - PL102C

Electrical Connector - Inspect
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

Wiring Harness (Open Circuit) - Test
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

Electrical Connector - Inspect
Machine Security System

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

System Schematic
MSS3s Machine Security System

Troubleshooting

Electrical Component and Connector Locations
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

MID 039 - CID 0444 - FMI 03
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

MID 039 - CID 0444 - FMI 05
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

MID 039 - CID 0444 - FMI 06
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

MID 039 - CID 1623 - FMI 03
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

MID 039 - CID 1623 - FMI 05
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

MID 039 - CID 1623 - FMI 06
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

MID 039 - CID 1670 - FMI 04
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

MID 039 - CID 1670 - FMI 05
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

MID 122 - CID 0269 - FMI 03
Product Link 151/201

MID 122 - CID 0269 - FMI 04
Product Link 151/201

Electrical Component and Connector Locations
Machine Security System

MID 039 - CID 2198 - FMI 02
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System

Sensors and Electrical Connectors
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines

Engine Wiring Information
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines

CID 1894 FMI 02
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines

Electrical Connectors - Inspect
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines

Electrical Power Supply Circuit - Test
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

Cat Data Link - Test
MSS3s Machine Security System

Wiring Harness (Open Circuit) - Test
MSS3s Machine Security System

Wiring Harness (Short Circuit) - Test
MSS3s Machine Security System

Connector Locations
MSS3s Machine Security System

Connector Contact Description
MSS3s Machine Security System

Electrical Connector - Inspect
MSS3s Machine Security System

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

A Control Box and a Control Unit are Available for the Adjustment of the Magnetic Drop Time {1404, 1408, 4450, 4453, 7426}
2006/05/15

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Improved Solenoid Valves for Auxiliary High Pressure are Now Used on Series C and Series D Wheeled Excavators {1408, 5051, 5064, 5479}
2008/05/12

New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}
2009/02/16

An Improved Switch for the Medium Pressure Function is Now Available for Certain Models of M300C Series Wheeled Excavators {1408}
2009/01/19

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Caterpillar Parts SIS Catalog M322C :

195-0704 SWIVEL GP-ELECTRIC

9G-7641 SWITCH GP-START

188-4970 SWITCH GP-ROCKER

343-3447 SWITCH GP-PRESSURE

196-5651 SWITCH GP-LIQUID LEVEL

7N-0718 SWITCH GP-DISCONNECT

234-2656 STARTING MOTOR GP-ELECTRIC

176-2540 STARTING MOTOR GP-ELECTRIC

187-3799 WIRING GP-CAB

221-9037 WIRING GP-CAB

202-1131 WIRING GP-CHASSIS

202-1133 WIRING GP-CHASSIS

187-3798 WIRING GP-CONSOLE

Truck sale:

USD $50,526

2005 CAT M322C

d&h concrete services ltd

USD $39,000

2004 CAT M322C

MILTON CAT
SYRACUSE, New York

USD $59,000

2006 CAT M322C

BTM MACHINERY
Georgia

$39,000 USD

CATERPILLAR M322C 2004
- WHEEL EXCAVATORS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus

Call

2004 CAT M322C

COFESER
Ponferrada, LEON, Spain 24400