LUBRICATION SYSTEM
BREATHER GPPUMP GP-ENGINE OIL
FILLER GP-ENGINE OIL
FILTER GP-ENGINE OIL
BREATHER GP
GAUGE GP-OIL LEVEL (DIPSTICK)
LINES GP-ENGINE OIL
LUBRICATION SYSTEM
BREATHER GP
#SEBP31950050
2N-8220: BREATHER GP
For full view, you need register
Parts for your PM3412 POWER MODULE:
CATERPILLAR SIS#SEBP31950051
4N-2481: FASTENER GP-OIL PUMP MOUNTING
4N-2481 FASTENER GP-OIL PUMP MOUNTING -ENGINE
S/N BPG151-UP
S/N BPG151-UP
For full view, you need register
Parts for your PM3412 POWER MODULE:
CATERPILLAR SIS#SEBP31950052
2W-6537: FILLER GP-ENGINE OIL
2W-6537 FILLER GP-ENGINE OIL
S/N BPG151-UP
S/N BPG151-UP
For full view, you need register
#SEBP31950053
4N-2387: FILTER GP-ENGINE OIL
4N-2387 FILTER GP-ENGINE OIL
S/N BPG151-UP
S/N BPG151-UP
For full view, you need register
Parts for your PM3412 POWER MODULE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 0S-1594 | [10] | BOLT (3/8-16X1-IN) | |
| 2. | 3P-0650 | [3] | SEAL-O-RING | |
| 3. | 9M-0853 | [2] | PLUNGER-VALVE | |
| 4. | 4N-8150 | [2] | SPRING | |
| 5. | 4N-0861 | [1] | COVER | |
| 4N-0865 | [1] | GASKET | ||
| 6. | 8S-9191 | [2] | BOLT (3/8-16X4-IN) | |
| 7. | 4N-2304 | [1] | BASE AS-OIL FILTER | |
| 8. | 2P-4304 | [2] | STUD-HOLLOW | |
| 9. | 5M-6213 | [1] | PLUG-PIPE (1/4-18-THD) | |
| 10. | 6V-5048 | [1] | SEAL-O-RING | |
| 11. | 8C-3445 | [1] | CAP-DUST (FLUID SAMPLING VALVE) | |
| 12. | 8C-3446 | [1] | VALVE-SAMPLING (ENGINE OIL) | |
| 13. | 5M-2894 | [3] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 14. | 0L-2070 | [1] | BOLT (3/8-16X2.25-IN) | |
| 15. | 5P-8068 | [1] | SEAL-O-RING | |
| 16. | 4N-8928 | [1] | SHIELD-OIL FILTER | |
| 4B-4161 | [5] | SCREW-DRIVE (NO 6X3/8-IN) | ||
| 17. | 1R-1808 | [2] | FILTER-ENGINE OIL (ADVANCED EFFICIENCY) |
#SEBP31950054
4P-7773: FUMES DISPOSAL GP
4P-7773 FUMES DISPOSAL GP
S/N 5FL1-UP
FOR USE WITH SERIES TURBO ENGINES, SIZE "E" RADIATOR
CANNOT BE USED WITH ENCLOSURE GPS
AN ATTACHMENT
S/N 5FL1-UP
FOR USE WITH SERIES TURBO ENGINES, SIZE "E" RADIATOR
CANNOT BE USED WITH ENCLOSURE GPS
AN ATTACHMENT
For full view, you need register
#SEBP31950055
4W-4699: FUMES DISPOSAL GP
4W-4699 FUMES DISPOSAL GP
S/N 5FL1-UP
FOR USE WITH DRY MANIFOLD HEAT SHIELDS
CANNOT BE USED WITH SERIES TURBO ENGINES
AN ATTACHMENT
S/N 5FL1-UP
FOR USE WITH DRY MANIFOLD HEAT SHIELDS
CANNOT BE USED WITH SERIES TURBO ENGINES
AN ATTACHMENT
For full view, you need register
Parts for your PM3412 POWER MODULE:
CATERPILLAR SIS#SEBP31950056
6N-7305: FUMES DISPOSAL GP
6N-7305 FUMES DISPOSAL GP
S/N BPG151-UP
CANNOT BE USED WITH LEFT HAND FUEL FILTERS, RIGHT HAND PREMIUM INSTRUMENT PANEL
S/N BPG151-UP
CANNOT BE USED WITH LEFT HAND FUEL FILTERS, RIGHT HAND PREMIUM INSTRUMENT PANEL
For full view, you need register
Parts for your PM3412 POWER MODULE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-1255 E | HOSE (10-CM) | ||
| 2. | 124-6264 | [4] | CLAMP-HOSE | |
| 3. | 1S-0396 | [1] | CLIP | |
| 5P-1075 | [1] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 4. | 2S-2053 | [1] | CLIP | |
| 5. | 5M-2894 C | [3] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 6. | 4N-5962 | [1] | HOSE (FUMES DISPOSAL) | |
| 7. | 2W-6624 | [1] | TUBE (FUMES DISPOSAL)(RH) | |
| 8. | 7W-0639 C | [1] | TUBE (FUMES DISPOSAL)(LH) | |
| 9. | 8N-8390 C | [1] | BRACKET | |
| 10. | 2K-4973 C | [1] | LOCKNUT (3/8-16-THD) | |
| 11. | 1A-2029 C | [1] | BOLT (3/8-16X1.125-IN) | |
| 12. | 0S-1594 | [1] | BOLT (3/8-16X1-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP31950057
7E-4261: FUMES DISPOSAL GP
7E-4261 FUMES DISPOSAL GP
S/N 5FL1-UP
FOR USE WITH @@@@@ 7E-9056@@@@@, @@@@@ 6N-7305@@@@@, @@@@@ 2N-8220@@@@@, SIZE "E" RADIATOR
CANNOT BE USED WITH SERIES TURBO ENGINE, ENCLOSURE GPS
AN ATTACHMENT
S/N 5FL1-UP
FOR USE WITH @@@@@ 7E-9056@@@@@, @@@@@ 6N-7305@@@@@, @@@@@ 2N-8220@@@@@, SIZE "E" RADIATOR
CANNOT BE USED WITH SERIES TURBO ENGINE, ENCLOSURE GPS
AN ATTACHMENT
For full view, you need register
#SEBP31950058
2W-9203: GAUGE GP-OIL LEVEL (DIPSTICK)
2W-9203 GAUGE GP-OIL LEVEL (DIPSTICK) -ENGINE
S/N BPG151-UP
S/N BPG151-UP
For full view, you need register
Parts for your PM3412 POWER MODULE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 0S-1608 | [1] | BOLT (3/8-16X3.75-IN) | |
| 2. | 5M-2894 | [3] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 3. | 7N-7504 | [1] | BRACKET | |
| 4. | 0L-1351 | [1] | BOLT (3/8-16X0.875-IN) | |
| 9S-8752 | [1] | NUT-FULL (3/8-16-THD) | ||
| 5. | 2W-9202 | [1] | GAUGE AS-OIL LEVEL (DIPSTICK) (ENGINE) | |
| 6. | 2W-9205 | [1] | GUIDE AS-OIL LEVEL GAUGE (ENGINE) | |
| 7. | 118-5068 | [1] | SEAL-O-RING | |
| 8. | 165-6170 J | [3] | PLUG | |
| J | (USE TO PLUG OPTIONAL DIPSTICK LOCATIONS) | |||
#SEBP31950059
2W-9182: LINES GP-ENGINE OIL
2W-9182 LINES GP-ENGINE OIL
S/N BPG151-UP
S/N BPG151-UP
For full view, you need register
Parts for your PM3412 POWER MODULE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 0S-1571 | [2] | BOLT (3/8-16X1.75-IN) | |
| 2. | 5M-2894 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 3. | 0S-0509 | [2] | BOLT (3/8-16X0.75-IN) | |
| 4. | 4N-2378 | [1] | TUBE AS | |
| 5. | 109-0078 | [1] | SEAL-O-RING | |
| 6. | 8J-4351 | [1] | SEAL-O-RING | |
| 7. | 1L-0509 | [1] | BOLT (3/8-16X0.74-IN) | |
| 9N-1627 | [1] | WASHER (0.391X0.75X0.109-IN THK) | ||
| 8. | 6N-7333 | [1] | TUBE AS-PUMP SUCTION | |
| 9. | 6N-1050 | [1] | SUPPORT-BELL | |
| 10. | 1A-2029 | [2] | BOLT (3/8-16X1.125-IN) | |
| 11. | 4N-0913 | [1] | SCREEN-STRAINER | |
| 12. | 8N-2104 | [1] | BELL AS-SUCTION | |
| 13. | 9F-2978 | [2] | NUT-WELD (3/8-16-THD) | |
| 14. | 4N-0914 | [1] | CLIP |
Information:
LUBRICATION SYSTEM
BREATHER GP
Tool Operating Manual
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
