BASIC ENGINE
CYLINDER BLOCK GPCYLINDER HEAD GP
PAN GP-OIL
DRIVE GP-FAN
CYLINDER HEAD GP
PARTS GP-MISCELLANEOUS
BASIC ENGINE
CYLINDER BLOCK GP#SEBP31990020
152-2884: CYLINDER BLOCK GP
Parts for your 312C EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 1N-3762 | [9] | PLUG-CUP | |
2. | 6I-0195 | [1] | PLUG | |
3. | 6I-1074 | [4] | VALVE AS (OIL JET) | |
(EACH INCLUDES) | ||||
4. | 6I-0686 | [1] | SPRING | |
5. | 6I-1075 | [1] | BALL | |
6. | 6I-1076 | [1] | RETAINER | |
7. | 8F-2534 | [1] | GASKET | |
8. | 9Y-5015 | [1] | PLUG-FREEZE | |
9. | 148-3026 | [4] | JET AS-PISTON COOLING | |
10. | 036-5802 | [1] | BEARING | |
11. | 067-6002 | [10] | DOWEL | |
12. | 067-6006 | [1] | PLUG | |
13. | 067-6043 | [6] | PLUG-SIDE | |
14. | 067-6805 | [1] | PLUG | |
16. | 035-8068 | [10] | BOLT (5/8-18X3.75-IN) | |
17. | 111-1815 | [4] | LINER | |
18. | 127-9768 | [1] | PLUG | |
19. | 147-1978 | [2] | DOWEL |
#SEBP31990021
209-5562: CYLINDER BLOCK GP
209-5562 CYLINDER BLOCK GP
S/N 7BJ54856-UP
PART OF 139-4663 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@209-6725@@@@@
FIELD REPLACEMENT FOR @@@@@152-2884@@@@@
S/N 7BJ54856-UP
PART OF 139-4663 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@209-6725@@@@@
FIELD REPLACEMENT FOR @@@@@152-2884@@@@@
Parts for your 312C EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 1N-3762 | [5] | PLUG-CUP | |
2. | 6I-0195 | [1] | PLUG | |
3. | 6I-1074 | [4] | VALVE AS (OIL JET) | |
(EACH INCLUDES) | ||||
3A. | 6I-0686 | [1] | SPRING | |
3B. | 5B-9318 | [1] | BALL | |
3C. | 6I-1076 | [1] | RETAINER | |
4. | 147-1978 | [2] | DOWEL | |
5. | 127-9768 | [1] | PLUG | |
6. | 111-1815 | [4] | LINER | |
7. | 214-1668 | [1] | WASHER-SPECIAL | |
8. | 494-3830 | [1] | PLUG-FREEZE | |
9. | 148-3026 | [4] | JET AS-PISTON COOLING | |
10. | 036-5802 | [1] | BEARING | |
11. | 067-6002 | [10] | DOWEL | |
12. | 067-6006 | [1] | PLUG | |
13. | 067-6043 | [6] | PLUG-SIDE | |
14. | 067-6805 | [1] | PLUG | |
15. | 8T-0269 M | [2] | BOLT-SOCKET HEAD (M6X1X20-MM) | |
16. | 215-2103 | [4] | PLUG | |
M | METRIC PART |
#SEBP31990022
209-6725: CYLINDER BLOCK GP
209-6725 CYLINDER BLOCK GP
S/N 7BJ54856-UP
FIELD REPLACEMENT FOR @@@@@209-5562@@@@@
S/N 7BJ54856-UP
FIELD REPLACEMENT FOR @@@@@209-5562@@@@@
Parts for your 312C EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 6I-1074 | [4] | VALVE AS (OIL JET) | |
(EACH INCLUDES) | ||||
1A. | 6I-0686 | [1] | SPRING | |
1B. | 5B-9318 | [1] | BALL | |
1C. | 6I-1076 | [1] | RETAINER | |
2. | 148-3026 | [4] | JET AS-PISTON COOLING | |
3. | 161-9820 | [2] | PIN | |
4. | 249-0207 | [1] | BRIDGE | |
5. | 214-1668 | [1] | WASHER-SPECIAL | |
6. | 215-2103 | [4] | PLUG | |
7. | 0L-1138 | [4] | BOLT (3/8-24X0.5-IN) | |
8. | 343-4295 | [6] | PLUG | |
9. | 6I-0219 | [1] | PLATE | |
10. | 6I-0220 | [1] | GASKET | |
11. | 6I-0298 | [1] | GASKET | |
12. | 6I-0302 M | [4] | BOLT (M10X1.5X25-MM) | |
13. | 8T-0269 M | [2] | BOLT-SOCKET HEAD (M6X1X20-MM) | |
14. | 6I-0572 M | [2] | BOLT (M8X1.25X20-MM) | |
15. | 302-4757 | [1] | PLUG | |
16. | 494-3830 | [1] | PLUG-FREEZE | |
17. | 0S-2353 | [10] | BOLT (5/8-18X3.75-IN) | |
18. | 036-5802 | [1] | BEARING | |
19. | 067-6002 | [10] | DOWEL | |
20. | 067-6006 | [2] | PLUG | |
21. | 067-6043 | [6] | PLUG-SIDE | |
22. | 067-6805 | [1] | PLUG | |
23. | 067-6808 | [1] | PLUG | |
24. | 067-9520 | [4] | SPACER | |
25. | 069-1124 | [1] | PLUG | |
26. | 101-3923 | [1] | PLATE | |
27. | 111-1815 | [4] | LINER | |
28. | 127-9768 | [1] | PLUG | |
29. | 147-1978 | [2] | DOWEL | |
M | METRIC PART |
#SEBP31990023
139-4666: CYLINDER HEAD GP
Parts for your 312C EXCAVATOR:
CATERPILLAR SIS#SEBP31990024
164-6098: CYLINDER HEAD GP
Parts for your 312C EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 147-1979 | [16] | RETAINER-VALVE SPRING | |
2. | 7C-2851 | [4] | PLUG | |
3. | 067-6043 | [1] | PLUG-SIDE | |
4. | 067-6044 | [1] | PLUG | |
5. | 067-6045 | [1] | WASHER (16.25X21.03X1.62-MM THK) | |
6. | 138-2050 | [4] | VALVE-EXHAUST | |
7. | 138-2052 | [4] | VALVE-INLET | |
8. | 138-2056 | [4] | INSERT-VALVE SEAT (EXHAUST) | |
9. | 138-2057 | [4] | INSERT-VALVE SEAT (INLET) | |
10. | 163-9256 | [4] | GUIDE-VALVE (EXHAUST) | |
11. | 185-0882 | [4] | GUIDE-VALVE (INTAKE) | |
12. | 138-2060 | [8] | CAP | |
13. | 145-6856 | [4] | SEAL (INLET) | |
14. | 145-6858 | [4] | SEAL (EXHAUST) | |
15. | 206-4127 | [8] | SPRING-VALVE | |
16. | 147-1978 | [2] | DOWEL |
#SEBP31990025
164-6098: CYLINDER HEAD GP
Parts for your 312C EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 147-1979 | [16] | RETAINER-VALVE SPRING | |
2. | 7M-7410 C | [4] | PLUG-PIPE | |
3. | 067-6043 | [1] | PLUG-SIDE | |
4. | 067-6044 | [1] | PLUG | |
5. | 247-4928 C | [1] | WASHER (16.5X20.5X1.6-MM THK) | |
6. | 138-2050 | [4] | VALVE-EXHAUST | |
7. | 138-2052 | [4] | VALVE-INLET | |
8. | 138-2056 | [4] | INSERT-VALVE SEAT (EXHAUST) | |
9. | 138-2057 | [4] | INSERT-VALVE SEAT (INLET) | |
10. | 163-9256 | [4] | GUIDE-VALVE (EXHAUST) | |
11. | 185-0882 | [4] | GUIDE-VALVE (INTAKE) | |
12. | 138-2060 | [8] | CAP | |
13. | 145-6856 | [4] | SEAL (INLET) | |
14. | 145-6858 | [4] | SEAL (EXHAUST) | |
15. | 206-4127 | [8] | SPRING-VALVE | |
16. | 147-1978 | [2] | DOWEL | |
C | CHANGE FROM PREVIOUS TYPE |
#SEBP31990026
116-1155: DRAIN GP-ENGINE OIL
116-1155 DRAIN GP-ENGINE OIL
S/N BNN1-UP; CBT1-UP
PART OF 183-8164 INSTALLATION AR-ENGINE
S/N BNN1-UP; CBT1-UP
PART OF 183-8164 INSTALLATION AR-ENGINE
Parts for your 312C EXCAVATOR:
CATERPILLAR SIS#SEBP31990027
141-4808: DRIVE GP-FAN
Parts for your 312C EXCAVATOR:
CATERPILLAR SIS#SEBP31990028
146-0180: FASTENER GP-CYLINDER HEAD
146-0180 FASTENER GP-CYLINDER HEAD
S/N 7BJ1-UP
PART OF 189-6184 ENGINE AR-PRIMARY
S/N 7BJ1-UP
PART OF 189-6184 ENGINE AR-PRIMARY
Parts for your 312C EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 124-3815 M | [3] | BOLT (M8X1.25X16-MM) | |
M | METRIC PART |
#SEBP31990029
205-4920: FASTENER GP-ENGINE
Parts for your 312C EXCAVATOR:
CATERPILLAR SISInformation:
BASIC ENGINE
CYLINDER BLOCK GP
Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the
Specifications
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3000 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3000 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3000 Engine Series Cylinder Blocks {1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Disassembly and Assembly