AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

357-1319 CYLINDER BLOCK AS S/N 9BZ400-UP PART OF 234-9702 CYLINDER BLOCK GP AN ATTACHMENT 3456 GEN SET ENGINE


BASIC ENGINE
CYLINDER BLOCK GP
CYLINDER HEAD GP

GEN SET ENGINE 3456 GEN SET ENGINE 9BZ
 3456 DPGDS Generator Set-Military 9BZ00001-UP SEBP3201 3456 9BZ   (1999)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK AS
155-0741 CYLINDER BLOCK AS
CYLINDER BLOCK AS
234-9709 CYLINDER BLOCK AS
CYLINDER BLOCK AS
357-1319 CYLINDER BLOCK AS
CYLINDER BLOCK GP
155-0740 CYLINDER BLOCK GP
CYLINDER BLOCK GP
185-5260 CYLINDER BLOCK GP
CYLINDER BLOCK GP
234-9702 CYLINDER BLOCK GP
 

#SEBP32010020
 

357-1319: CYLINDER BLOCK AS

357-1319 CYLINDER BLOCK AS
S/N 9BZ400-UP
PART OF 234-9702 CYLINDER BLOCK GP
AN ATTACHMENT
i05119251 SEBP3201
3571319 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 3456 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 357-1315 [1] CYLINDER BLOCK AS  
  3P-1323 [14] BOLT-BEARING CAP (7/8-14X7.75-IN)  
  9H-1031 [14] WASHER-HARD (24X41.5X6-MM THK)  
  167-8081 [7] CAP-CRANKSHAFT BEARING  
2. 420-2631 [6] LINER-CYLINDER BLOCK  
3. 110-2220 [6] SEAL-LINER  
4. 131-3717 [6] SEAL D-RING  
5. 142-6217 [6] SEAL-O-RING  
6. 9L-5854 [6] BAND-FILLER (130.2-MM ID)  
 

#SEBP32010021
 

155-0740: CYLINDER BLOCK GP

155-0740 CYLINDER BLOCK GP
S/N 9BZ11-UP
AN ATTACHMENT
i00963437 SEBP3201
1550740 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3456 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 155-0741 Y [1] CYLINDER BLOCK AS  
2. 1S-9540 [1] DOWEL (30.23MM X 9.37MM)  
3. 5P-0840 [1] SEAL-O-RING (12.29MM ID)  
4. 7W-6492 [2] PLUG-PIPE (1/2-14-THD)(1/2-14 NPTF THD)  
5. 6I-1055 [1] DOWEL  
6. 4N-0683 [4] DOWEL  
7. 4N-1650 [1] DOWEL  
8. 6I-4421 [1] PLATE-SPACER  
9. 227-1204 [1] GASKET  
10. 8S-9094 [1] PLUG-ORIFICE  
11. 9S-4190 [1] PLUG-O-RING (7/8-14-THD)(7/16-20 THD)  
12. 114-4427 [1] SEAL-O-RING (19.18MM ID)  
13. 7X-7732 [4] PLUG-PIPE (3/8-18 NPTF THD)  
14. 9S-4182 [1] PLUG (7/16-20-THD)(7/16-20 THD)  
15. 9X-7378 [1] SEAL-O-RING (8.92MM ID)  
16. 100-7399 [2] PLUG  
17. 250-0466 [2] SEAL-O-RING (32.99MM ID)  
18. 142-2329 [1] SEAL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP32010022
 

185-5260: CYLINDER BLOCK GP

185-5260 CYLINDER BLOCK GP
S/N 9BZ1-UP
AN ATTACHMENT
i01366967 SEBP3201
1855260 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3456 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 155-0741 Y [1] CYLINDER BLOCK AS  
2. 1S-9540 [1] DOWEL  
3. 5P-0840 [1] SEAL-O-RING  
4. 7W-6492 [2] PLUG-PIPE (1/2-14-THD)  
5. 6I-1055 [1] DOWEL  
6. 4N-0683 [4] DOWEL  
7. 4N-1650 [1] DOWEL  
8. 6I-4421 [1] PLATE-SPACER  
9. 180-5734 [1] GASKET-PLATE  
10. 8S-9094 [1] PLUG-ORIFICE  
11. 9S-4190 [1] PLUG-O-RING (7/8-14-THD)  
12. 114-4427 [1] SEAL-O-RING  
13. 7X-7732 [5] PLUG-PIPE  
14. 9S-4182 [1] PLUG (7/16-20-THD)  
15. 9X-7378 [1] SEAL-O-RING  
16. 100-7399 [2] PLUG  
17. 3E-6747 [2] SEAL-O-RING  
18. 142-2329 [1] SEAL  
19. 194-6725 Y [1] SENSOR GP-PRESSURE (OIL)  
20. 3E-7448 [1] CONNECTOR  
21. 6V-5048 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP32010023
 

234-9702: CYLINDER BLOCK GP

234-9702 CYLINDER BLOCK GP
S/N 9BZ400-UP
Type 2
AN ATTACHMENT
i02920244 SEBP3201
2349702 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3456 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1S-9540 [1] DOWEL  
2. 4N-1650 [1] DOWEL  
3. 6I-1055 [1] DOWEL  
4. 6I-4421 [1] PLATE-SPACER  
6. 142-2329 [1] SEAL  
7. 227-1204 [1] GASKET  
8. 357-1319 CY [1] CYLINDER BLOCK AS  
9. 100-7399 [2] PLUG  
10. 250-0466 [2] SEAL-O-RING  
11. 4N-0683 [4] DOWEL  
12. 5P-0840 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP32010024
 

234-9702: CYLINDER BLOCK GP

234-9702 CYLINDER BLOCK GP
S/N 9BZ400-UP
Type 1
AN ATTACHMENT
i01959680 SEBP3201
2349702 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3456 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1S-9540 [1] DOWEL  
2. 4N-1650 [1] DOWEL  
3. 6I-1055 [1] DOWEL  
4. 6I-4421 [1] PLATE-SPACER  
5. 8S-9094 [1] PLUG-ORIFICE  
6. 142-2329 [1] SEAL  
7. 227-1204 [1] GASKET  
8. 234-9709 Y [1] CYLINDER BLOCK AS  
9. 100-7399 [2] PLUG  
10. 250-0466 [2] SEAL-O-RING  
11. 4N-0683 [4] DOWEL  
12. 5P-0840 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP32010025
 

223-7263: CYLINDER HEAD AS

223-7263 CYLINDER HEAD AS
S/N 9BZ400-UP
WITH PRE-FINISHED VALVE SEAT INSERTS
PART OF 223-9250 CYLINDER HEAD GP
AN ATTACHMENT
i01877339 SEBP3201
2237263 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3456 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 122-7375 [24] GUIDE-VALVE (STANDARD)  
  122-0447 AB GUIDE-VALVE (0.51-MM OS)  
  122-8612 AB GUIDE-VALVE (0.13-MM OS)  
2. 216-5582 [7] BUSHING (STANDARD)  
  217-0751 AB BUSHING (0.25-MM OS)  
  217-0752 AB BUSHING (0.762-MM OS)  
  261-3429 AB BUSHING (1.778-MM OS)  
  261-3430 AB BUSHING (1.27-MM OS)  
3. 280-3979 [12] INSERT-VALVE SEAT (INLET)(STANDARD)  
4. 226-5561 [12] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  288-4883 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
5. 263-4920 [6] SLEEVE-INJECTOR (INLET)  
8. 166-2904 [12] SEAL-O-RING  
9. 3B-0623 [17] PLUG-CUP  
10. 3B-0645 [20] PLUG-CUP  
11. 8T-6757 [3] PLUG-PIPE  
12. 9X-7430 [6] SEAL-O-RING  
13. 493-9591 [1] HEAD-CYLINDER  
  448-3297 [1] HEAD-CYLINDER  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP32010026
 

245-4324: CYLINDER HEAD AS

245-4324 CYLINDER HEAD AS
S/N 9BZ1-UP
PART OF 183-5296 CYLINDER HEAD GP
AN ATTACHMENT
i03949631 SEBP3201
2454324 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3456 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 122-7375 [24] GUIDE-VALVE (STANDARD)  
  122-0447 AB GUIDE-VALVE (0.51-MM OS)  
  122-8612 AB GUIDE-VALVE (0.13-MM OS)  
2. 9X-7430 [6] SEAL-O-RING  
3. 216-5582 [7] BUSHING (STANDARD)  
  217-0751 AB BUSHING (0.25-MM OS)  
  217-0752 AB BUSHING (0.762-MM OS)  
  261-3429 AB BUSHING (1.778-MM OS)  
  261-3430 AB BUSHING (1.27-MM OS)  
4. 224-3983 [12] INSERT-SEAT (INLET)(STANDARD)  
  314-3063 AB INSERT-VALVE SEAT (0.55-MM THK)  
  314-3064 AB INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  314-3065 AB INSERT-VALVE SEAT (0.13-MM OS)  
  314-3066 AB INSERT-VALVE SEAT (0.26-MM OS, INLET)  
  314-3067 AB INSERT-VALVE SEAT (0.26-MM OS)  
  314-3068 AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  314-3069 AB INSERT-VALVE SEAT (0.51-MM OS)  
5. 226-5561 [12] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  288-4883 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
6. 263-4920 [6] SLEEVE-INJECTOR (INLET)  
7. 166-2904 [12] SEAL-O-RING  
8. 3B-0623 [17] PLUG-CUP  
9. 3B-0645 [20] PLUG-CUP  
10. 8T-6757 [3] PLUG-PIPE  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP32010027
 

135-6531: CYLINDER HEAD GP

135-6531 CYLINDER HEAD GP
S/N 9BZ1-UP
AN ATTACHMENT
i01390769 SEBP3201
1356531 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3456 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-8618 [1] SENSOR GP-TEMPERATURE (INLET AIR)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  112-4550 E SLEEVE (31-CM)  
2. 194-6724 Y [1] SENSOR GP-PRESSURE (TURBOCHARGER OUTLET)  
3. 8T-6763 [1] PLUG-PIPE (1/4-18-THD)  
4. 224-5122 [1] GASKET (CYLINDER HEAD)  
5. 183-5296 CY [1] CYLINDER HEAD GP  
6. 194-8124 [6] SLEEVE AS (EXHAUST PORT)  
7. 3E-6772 [24] SEAL (WATER)  
8. 6I-4025 [16] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
8A. 124-1855 [1] BOLT-12 POINT HEAD (3/4-16X7.638-IN)  
8B. 5H-1504 [1] WASHER-HARD (20X33.5X5-MM THK)  
9. 6V-5048 [1] SEAL-O-RING  
10. 6V-5049 [5] SEAL-O-RING  
11. 106-5673 [10] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
11A. 124-1854 [1] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
11B. 5H-1504 [1] WASHER-HARD (20X33.5X5-MM THK)  
12. 8T-6762 [1] PLUG-PIPE (1/2-14-THD)  
13. 8L-2786 [1] SEAL-O-RING  
14. 2P-8421 [1] ADAPTER-O-RING  
15. 008-6817 [1] ELBOW  
16. 9S-8004 [3] PLUG (9/16-18-THD)  
17. 5P-0840 [1] SEAL-O-RING  
18. 030-3978 [1] CONNECTOR  
19. 6V-5050 [1] SEAL-O-RING  
20. 100-5725 [1] STUD (3/8-16X1.25-IN)  
21. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
22. 8T-6765 [2] PLUG-PIPE (1/4-18-THD)  
23. 9S-4191 [1] PLUG (9/16-18-THD)  
24. 9S-4190 [1] PLUG-O-RING (7/8-14-THD)  
25. 6V-3251 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP32010028
 

183-5296: CYLINDER HEAD GP

183-5296 CYLINDER HEAD GP
S/N 9BZ1-UP
PART OF 135-6531 CYLINDER HEAD GP
AN ATTACHMENT
i01266813 SEBP3201
1835296 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3456 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 245-4324 Y [1] CYLINDER HEAD AS  
2. 490-7198 [12] VALVE-INLET  
3. 490-7200 [12] VALVE-EXHAUST  
4. 6I-0928 [24] WASHER-SPECIAL  
5. 186-2001 [24] ROTOCOIL AS  
6. 247-9908 [24] SPRING-VALVE (OUTER)  
7. 2A-4429 [48] LOCK-RETAINER  
8. 163-2478 [24] SEAL-VALVE STEM  
9. 211-3122 [24] SPRING-VALVE (INNER)  
   
    AVAILABLE REPAIR KIT(S):
  299-8342 [1] KIT-CYLINDER HEAD  
    (INCLUDES BRIDGE-VALVE & CYLINDER HEAD)
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP32010029
 

223-9250: CYLINDER HEAD GP

223-9250 CYLINDER HEAD GP
S/N 9BZ400-UP
FOR 2300 RPM APLICATIONS FEILD REPLACEMENT 380-9100 CYLINDER HEAD IS AVALIBLE
PART OF 234-5985 CYLINDER HEAD GP
AN ATTACHMENT
i02462290 SEBP3201
2239250 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3456 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-4429 [48] LOCK-RETAINER  
2. 6I-0928 [24] WASHER-SPECIAL  
3. 490-7198 [12] VALVE-INLET  
4. 490-7200 [12] VALVE-EXHAUST  
5. 163-2478 [24] SEAL-VALVE STEM  
6. 247-9908 [24] SPRING-VALVE (OUTER)  
7. 223-7263 CY [1] CYLINDER HEAD AS  
8. 186-2001 [24] ROTOCOIL AS  
9. 211-3122 [24] SPRING-VALVE (INNER)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Cylinder Head And Spacer Plate Gasket Failures On Certain Engines {1100, 1201}
2015/05/15
Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Tool Operating Manual
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}

Caterpillar Parts SIS Catalog 3456 :

CYLINDER BLOCK AS
234-9709 CYLINDER BLOCK AS
CYLINDER BLOCK AS
155-0741 CYLINDER BLOCK AS
CRANKSHAFT GP
248-5077 CRANKSHAFT GP
CRANKSHAFT GP
137-7298 CRANKSHAFT GP
CRANKSHAFT AS
187-8989 CRANKSHAFT AS
COVER GP-VALVE MECHANISM
179-2145 COVER GP-VALVE MECHANISM
COVER GP-FRONT HOUSING
159-6159 COVER GP-FRONT HOUSING
COVER GP-FRONT HOUSING
102-2235 COVER GP-FRONT HOUSING
CYLINDER BLOCK GP
155-0740 CYLINDER BLOCK GP
CYLINDER BLOCK GP
185-5260 CYLINDER BLOCK GP
CYLINDER BLOCK GP
234-9702 CYLINDER BLOCK GP
CYLINDER BLOCK GP
234-9702 CYLINDER BLOCK GP
CYLINDER HEAD AS
223-7263 CYLINDER HEAD AS
CYLINDER HEAD AS
245-4324 CYLINDER HEAD AS
CYLINDER HEAD GP
135-6531 CYLINDER HEAD GP
CYLINDER HEAD GP
183-5296 CYLINDER HEAD GP

Truck sale:

Caterpillar 3456, Stationary Generator Sets, Construction
165,000 
Caterpillar 3456, Stationary Generator Sets, Construction
- Stationary Generator Sets
PANTROPIC POWER SYSTEMS
Caterpillar 3456, mobile generator sets, Construction
290,665 
Caterpillar 3456, mobile generator sets, Construction
- mobile generator sets
TOROMONT POWER SYSTEMS
Caterpillar 3456, Stationary Generator Sets, Construction
 
Caterpillar 3456, Stationary Generator Sets, Construction
- Stationary Generator Sets
STOWERS POWER SYSTEMS
 
 
Caterpillar 3456, Stationary Generator Sets, Construction


 
 
Caterpillar 3456, Stationary Generator Sets, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.