BASIC ENGINE
VALVE MECHANISM GPCRANKSHAFT GP
BASIC ENGINE
VALVE MECHANISM GP
#SEBP32020050
246-2583: COVER GP-VALVE MECHANISM
246-2583 COVER GP-VALVE MECHANISM
S/N CRS1-UP
PART OF 234-3058 ENGINE AR-PRIMARY
Type 1
AN ATTACHMENT
S/N CRS1-UP
PART OF 234-3058 ENGINE AR-PRIMARY
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 416D BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6I-0260 M | [2] | BOLT (M8X1.25X25-MM) | |
| 2. | 6I-0846 M | [3] | BOLT (M6X1X14-MM) | |
| 3. | 6I-0917 M | [1] | BOLT (M6X1X25-MM) | |
| 4. | 100-4841 M | [2] | BOLT (M6X1X10-MM) | |
| 5. | 225-6522 | [1] | PLUG-CUP | |
| 6. | 230-9125 | [1] | CONNECTOR (BREATHER) | |
| 6A. | 150-7732 | [1] | SEAL-O-RING (19.5MM ID) | |
| 6B. | 225-6455 | [2] | BOLT (ISOLATOR) | |
| 6C. | 225-6517 | [1] | GASKET | |
| 7. | 230-9127 | [1] | COVER | |
| 8. | 237-0026 | [1] | COVER AS (VALVE) | |
| 8A. | 225-6451 | [1] | GASKET (VALVE COVER) | |
| 8B. | 225-6455 | [10] | BOLT | |
| 8C. | 225-6456 | [1] | SPRING | |
| 8D. | 225-6461 | [1] | CAP | |
| 8E. | 225-6464 | [1] | DIAPHRAGM (CRANKCASE PRESSURE CONTACTOR) | |
| 8F. | 225-6477 | [1] | PLATE | |
| 8G. | 225-6478 | [4] | SCREW-MACHINE | |
| 8H. | 225-6479 | [1] | CAP | |
| 9. | 237-0769 | [1] | SHIELD-HEAT | |
| 10. | 246-1163 | [1] | FILLER AS-OIL | |
| 11. | 229-4896 | [1] | SEAL-O-RING (021.8MM ID) | |
| M | METRIC PART | |||
#SEBP32020051
246-2583: COVER GP-VALVE MECHANISM
246-2583 COVER GP-VALVE MECHANISM
S/N CRS1-UP
PART OF 234-3058 ENGINE AR-PRIMARY
Type 2
AN ATTACHMENT
S/N CRS1-UP
PART OF 234-3058 ENGINE AR-PRIMARY
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 416D BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6I-0260 M | [2] | BOLT (M8X1.25X25-MM) | |
| 2. | 6I-0846 M | [3] | BOLT (M6X1X14-MM) | |
| 3. | 6I-0917 M | [1] | BOLT (M6X1X25-MM) | |
| 4. | 100-4841 M | [2] | BOLT (M6X1X10-MM) | |
| 5. | 225-6522 | [1] | PLUG-CUP | |
| 6. | 286-3029 C | [1] | BREATHER AS (CONNECTOR) | |
| 6A. | 150-7732 | [1] | SEAL-O-RING (19.5MM ID) | |
| 6B. | 286-3030 | [1] | RING-SEAL (ISOLATOR) | |
| 7. | 230-9127 | [1] | COVER (INJECTOR) | |
| 8. | 247-7798 C | [1] | COVER AS (VALVE) | |
| 8A. | 225-6451 | [1] | GASKET (VALVE COVER) | |
| 8B. | 225-6455 | [10] | BOLT | |
| 8C. | 225-6456 | [1] | SPRING | |
| 8D. | 225-6461 | [1] | CAP | |
| 8E. | 225-6464 | [1] | DIAPHRAGM (CRANKCASE PRESSURE CONTACTOR) | |
| 8F. | 225-6477 | [1] | PLATE | |
| 8G. | 225-6478 | [4] | SCREW-MACHINE | |
| 8H. | 225-6479 | [1] | CAP | |
| 9. | 237-0769 | [1] | SHIELD-HEAT | |
| 10. | 246-1163 | [1] | FILLER AS-OIL | |
| 10A. | 229-4896 | [1] | SEAL-O-RING (021.8MM ID) | |
| 11. | 100-4838 CM | [2] | BOLT (M6X1X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP32020052
246-2583: COVER GP-VALVE MECHANISM
246-2583 COVER GP-VALVE MECHANISM
S/N CRS785-60204
PART OF 234-3058 ENGINE AR-PRIMARY
AN ATTACHMENT
S/N CRS785-60204
PART OF 234-3058 ENGINE AR-PRIMARY
AN ATTACHMENT
For full view, you need register
Parts for your 416D BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6I-0260 M | [2] | BOLT (M8X1.25X25-MM) | |
| 2. | 6I-0846 M | [3] | BOLT (M6X1X14-MM) | |
| 3. | 6I-0917 M | [1] | BOLT (M6X1X25-MM) | |
| 4. | 100-4841 M | [2] | BOLT (M6X1X10-MM) | |
| 5. | 225-6522 | [1] | PLUG-CUP | |
| 6. | 286-3029 | [1] | BREATHER AS (CONNECTOR) | |
| 6A. | 150-7732 | [1] | SEAL-O-RING (19.5MM ID) | |
| 6B. | 286-3030 | [1] | RING-SEAL (ISOLATOR) | |
| 7. | 230-9127 | [1] | COVER (INJECTOR) | |
| 8. | 308-1792 C | [1] | COVER GP-VALVE MECHANISM | |
| 8A. | 225-6451 | [1] | GASKET (VALVE COVER) | |
| 8B. | 225-6456 | [1] | SPRING (BREATHER VALVE) | |
| 8C. | 225-6461 | [1] | CAP (VALVE COVER) | |
| 8D. | 225-6464 | [1] | DIAPHRAGM (CRANKCASE PRESSURE CONTACTOR) | |
| 8E. | 225-6477 | [1] | PLATE | |
| 8F. | 225-6478 | [4] | SCREW-MACHINE | |
| 8G. | 225-6479 | [1] | CAP (BREATHER VALVE) | |
| 9. | 237-0769 | [1] | SHIELD-HEAT | |
| 10. | 317-3769 | [1] | FILLER GP-ENGINE OIL | |
| 11. | 100-4838 M | [2] | BOLT (M6X1X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP32020053
246-2583: COVER GP-VALVE MECHANISM
246-2583 COVER GP-VALVE MECHANISM
S/N CRS60205-UP
PART OF 234-3058 ENGINE AR-PRIMARY
AN ATTACHMENT
S/N CRS60205-UP
PART OF 234-3058 ENGINE AR-PRIMARY
AN ATTACHMENT
For full view, you need register
Parts for your 416D BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6I-0260 M | [2] | BOLT (M8X1.25X25-MM) | |
| 2. | 346-8219 C | [1] | FILM-WARNING (UNIVERSAL WARNING) | |
| 3. | 6I-0917 M | [1] | BOLT (M6X1X25-MM) | |
| 4. | 100-4841 M | [2] | BOLT (M6X1X10-MM) | |
| 5. | 225-6522 | [1] | PLUG-CUP | |
| 6. | 286-3029 | [1] | BREATHER AS (CONNECTOR) | |
| 6A. | 150-7732 | [1] | SEAL-O-RING | |
| 6B. | 286-3030 | [1] | RING-SEAL (ISOLATOR) | |
| 7. | 100-4838 M | [2] | BOLT (M6X1X20-MM) | |
| 8. | 308-1792 Y | [1] | COVER GP-VALVE MECHANISM | |
| 9. | 237-0769 | [1] | SHIELD-HEAT | |
| 10. | 317-3769 | [1] | FILLER GP-ENGINE OIL | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32020054
308-1792: COVER GP-VALVE MECHANISM
308-1792 COVER GP-VALVE MECHANISM
S/N CRS60205-UP
PART OF 246-2583 COVER GP-VALVE MECHANISM
AN ATTACHMENT
S/N CRS60205-UP
PART OF 246-2583 COVER GP-VALVE MECHANISM
AN ATTACHMENT
For full view, you need register
Parts for your 416D BACKHOE LOADER:
CATERPILLAR SIS#SEBP32020055
145-6688: CRANKSHAFT GP
145-6688 CRANKSHAFT GP
S/N 7BJ19000-67007
PART OF 188-0883 ENGINE AR-PRIMARY
AN ATTACHMENT
S/N 7BJ19000-67007
PART OF 188-0883 ENGINE AR-PRIMARY
AN ATTACHMENT
For full view, you need register
Parts for your 416D BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1B-8736 | [1] | KEY-WOODRUFF | |
| 2. | 4P-9948 | [1] | CRANKSHAFT GP | |
| 3. | 353-2205 B | [1] | KIT-ROD BEARING (STANDARD) | |
| 353-2206 AB | KIT-ROD BEARING (0.25-MM US) | |||
| 353-2207 AB | KIT-ROD BEARING (0.50-MM US) | |||
| 353-2208 AB | KIT-ROD BEARING (0.75-MM US) | |||
| 4. | 032-9090 B | [2] | WASHER-THRUST (STANDARD-UPPER) | |
| 067-6873 AB | WASHER-THRUST (0.18-MM OS)(UPPER) | |||
| 5. | 353-7427 B | [1] | KIT-BEARING (STANDARD) | |
| 353-7428 AB | KIT-BEARING (0.25-MM US) | |||
| 353-7429 AB | KIT-BEARING (0.50-MM US) | |||
| 353-7430 AB | KIT-BEARING (0.75-MM US) | |||
| 6. | 032-9091 B | [2] | WASHER-THRUST (STANDARD-LOWER) | |
| 067-6874 AB | WASHER-THRUST (0.18-MM OS)(LOWER) | |||
| 7. | 6I-0223 | [1] | GEAR-CRANKSHAFT (28-TEETH) | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP32020056
185-3190: CRANKSHAFT GP
For full view, you need register
Parts for your 416D BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1B-8736 | [1] | KEY-WOODRUFF | |
| 2. | 4P-9948 B | [1] | CRANKSHAFT GP | |
| 3. | 353-2205 B | [1] | KIT-ROD BEARING (STANDARD) | |
| 353-2206 AB | KIT-ROD BEARING (0.25-MM US) | |||
| 353-2207 AB | KIT-ROD BEARING (0.50-MM US) | |||
| 353-2208 AB | KIT-ROD BEARING (0.75-MM US) | |||
| 4. | 032-9090 B | [2] | WASHER-THRUST (STANDARD-UPPER) | |
| 067-6873 AB | WASHER-THRUST (0.18-MM OS)(UPPER) | |||
| 5. | 353-7427 B | KIT-BEARING (STANDARD) | ||
| 353-7428 AB | KIT-BEARING (0.25-MM US) | |||
| 353-7429 AB | KIT-BEARING (0.50-MM US) | |||
| 353-7430 AB | KIT-BEARING (0.75-MM US) | |||
| 6. | 032-9091 B | [2] | WASHER-THRUST (STANDARD-LOWER) | |
| 067-6874 AB | WASHER-THRUST (0.18-MM OS)(LOWER) | |||
| 7. | 6I-0223 | [1] | GEAR-CRANKSHAFT (28-TEETH) | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP32020057
185-4599: CRANKSHAFT GP
For full view, you need register
Parts for your 416D BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1B-8736 | [1] | KEY-WOODRUFF | |
| 2. | 4P-9948 B | [1] | CRANKSHAFT GP | |
| 3. | 353-2205 B | [1] | KIT-ROD BEARING (STANDARD) | |
| 353-2206 AB | KIT-ROD BEARING (0.25-MM US) | |||
| 353-2207 AB | KIT-ROD BEARING (0.50-MM US) | |||
| 353-2208 AB | KIT-ROD BEARING (0.75-MM US) | |||
| 4. | 032-9090 B | [2] | WASHER-THRUST (STANDARD-UPPER) | |
| 067-6873 AB | WASHER-THRUST (0.18-MM OS)(UPPER) | |||
| 5. | 353-7427 B | [1] | KIT-BEARING (STANDARD) | |
| 353-7428 AB | KIT-BEARING (0.25-MM US) | |||
| 353-7429 AB | KIT-BEARING (0.50-MM US) | |||
| 353-7430 AB | [1] | KIT-BEARING (0.75-MM US) | ||
| 6. | 032-9091 B | [2] | WASHER-THRUST (STANDARD-LOWER) | |
| 067-6874 AB | WASHER-THRUST (0.18-MM OS)(LOWER) | |||
| 7. | 6I-0223 | [1] | GEAR-CRANKSHAFT (28-TEETH) | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP32020058
220-2669: CRANKSHAFT GP
220-2669 CRANKSHAFT GP
S/N 7BJ67008-UP
PART OF 188-0883 ENGINE AR-PRIMARY
Type 1
AN ATTACHMENT
S/N 7BJ67008-UP
PART OF 188-0883 ENGINE AR-PRIMARY
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 416D BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1B-8736 | [1] | KEY-WOODRUFF | |
| 2. | 6I-0223 | [1] | GEAR-CRANKSHAFT (28-TEETH) | |
| 3. | 139-7018 | [1] | CRANKSHAFT GP | |
| 4. | 353-7427 B | [1] | KIT-BEARING (STANDARD) | |
| 353-7428 AB | KIT-BEARING (0.25-MM US) | |||
| 353-7429 AB | KIT-BEARING (0.50-MM US) | |||
| 353-7430 AB | KIT-BEARING (0.75-MM US) | |||
| 5. | 353-2205 B | [1] | KIT-ROD BEARING (STANDARD) | |
| 353-2206 AB | KIT-ROD BEARING (0.25-MM US) | |||
| 353-2207 AB | KIT-ROD BEARING (0.50-MM US) | |||
| 353-2208 AB | KIT-ROD BEARING (0.75-MM US) | |||
| 6. | 032-9090 B | [2] | WASHER-THRUST (STANDARD-UPPER) | |
| 067-6873 AB | WASHER-THRUST (0.18-MM OS)(UPPER) | |||
| 7. | 032-9091 B | [2] | WASHER-THRUST (STANDARD-LOWER) | |
| 067-6874 AB | WASHER-THRUST (0.18-MM OS)(LOWER) | |||
| 8. | 7C-3196 | [3] | BOLT | |
| 9. | 7C-3195 | [1] | BLOCK-THRUST | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP32020059
220-2669: CRANKSHAFT GP
220-2669 CRANKSHAFT GP
S/N 7BJ67008-UP
PART OF 188-0883 ENGINE AR-PRIMARY
Type 2
AN ATTACHMENT
S/N 7BJ67008-UP
PART OF 188-0883 ENGINE AR-PRIMARY
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 416D BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1B-8736 | [1] | KEY-WOODRUFF | |
| 2. | 6I-0223 | [1] | GEAR-CRANKSHAFT (28-TEETH) | |
| 3. | 139-7018 | [1] | CRANKSHAFT GP | |
| 4. | 353-7427 B | [1] | KIT-BEARING (STANDARD) | |
| 353-7428 AB | KIT-BEARING (0.25-MM US) | |||
| 353-7429 AB | KIT-BEARING (0.50-MM US) | |||
| 353-7430 AB | KIT-BEARING (0.75-MM US) | |||
| 5. | 353-2205 B | [1] | KIT-ROD BEARING (STANDARD) | |
| 353-2206 AB | KIT-ROD BEARING (0.25-MM US) | |||
| 353-2207 AB | KIT-ROD BEARING (0.50-MM US) | |||
| 353-2208 AB | KIT-ROD BEARING (0.75-MM US) | |||
| 6. | 032-9090 B | [2] | WASHER-THRUST (STANDARD-UPPER) | |
| 067-6873 AB | WASHER-THRUST (0.18-MM OS)(UPPER) | |||
| 7. | 032-9091 B | [2] | WASHER-THRUST (STANDARD-LOWER) | |
| 067-6874 AB | WASHER-THRUST (0.18-MM OS)(LOWER) | |||
| 8. | 7C-3196 | [3] | BOLT | |
| 9. | 7C-3195 | [1] | BLOCK-THRUST | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Information:
BASIC ENGINE
VALVE MECHANISM GP
Truck Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
2012/10/08
Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
2012/10/08
Specifications
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Testing and Adjusting
Disassembly and Assembly
Service Magazine
