OPERATOR STATION
CONSOLE GPCONTROL GP-HYDRAULIC
OPERATOR STATION
CONSOLE GP
#SEBP32021140
183-4998: CONSOLE GP-SIDE
183-4998 CONSOLE GP-SIDE -RH
S/N BFP1-1756
PART OF 185-3524 CONSOLE GP-OPERATOR
AN ATTACHMENT
S/N BFP1-1756
PART OF 185-3524 CONSOLE GP-OPERATOR
AN ATTACHMENT
For full view, you need register
Parts for your 416D BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 118-5503 | [1] | LOUVER AS | |
| 2. | 164-1178 | [7] | CLIP | |
| 3. | 167-8247 | [1] | CONSOLE-SIDE | |
| 4. | 172-8591 M | [14] | NUT-CLIP (M6X1-THD) | |
| 5. | 183-4990 Y | [1] | COVER GP-CONSOLE | |
| 6. | 183-4991 Y | [1] | COVER GP-CONSOLE | |
| 7. | 104-2091 | [4] | SCREW-FLAT HEAD (6-20X0.5-IN) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32021141
183-4998: CONSOLE GP-SIDE
183-4998 CONSOLE GP-SIDE -RH
S/N BFP1757-17198
PART OF 185-3524 CONSOLE GP-OPERATOR
AN ATTACHMENT
S/N BFP1757-17198
PART OF 185-3524 CONSOLE GP-OPERATOR
AN ATTACHMENT
For full view, you need register
Parts for your 416D BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 118-5503 | [1] | LOUVER AS | |
| 2. | 164-1178 C | [5] | CLIP | |
| 3. | 172-8591 CM | [16] | NUT-CLIP (M6X1-THD) | |
| 4. | 183-4991 Y | [1] | COVER GP-CONSOLE | |
| 5. | 202-6142 C | [1] | CONSOLE-SIDE | |
| 6. | 204-7341 | [1] | COVER-FUSE | |
| 7. | 104-2091 | [4] | SCREW-FLAT HEAD (6-20X0.5-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32021142
164-1400: CONTROL GP-HYDRAULIC HAND
164-1400 CONTROL GP-HYDRAULIC HAND
S/N BFP1-17198
STANDARD
PART OF 164-1410 CONVERSION GP-HYD HAND CONTROL
AN ATTACHMENT
S/N BFP1-17198
STANDARD
PART OF 164-1410 CONVERSION GP-HYD HAND CONTROL
AN ATTACHMENT
For full view, you need register
Parts for your 416D BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4773 | [4] | BALL JOINT | |
| 2. | 8T-4815 | [4] | ROD END | |
| 3. | 9R-9901 | [6] | FASTENER (CLIP) | |
| 4. | 164-1361 | [2] | BOOT | |
| 5. | 164-1371 | [1] | PLATE | |
| 6. | 164-1399 | [2] | KNOB | |
| 7. | 164-1402 | [2] | SLEEVE | |
| 8. | 164-1404 | [2] | SPACER (10.67X16.95X23-MM THK) | |
| 9. | 164-1406 | [4] | ROD | |
| 10. | 164-1409 | [1] | LEVER AS (RH) | |
| 11. | 164-1411 | [1] | LEVER AS (LH) | |
| 12. | 164-1435 | [2] | PLATE | |
| 13. | 164-1560 | [1] | TOWER AS | |
| 14. | 167-8248 | [1] | CONSOLE-REAR | |
| 15. | 170-6312 | [4] | BEARING | |
| 16. | 179-8235 | [4] | LOCK PIN | |
| 17. | 190-5130 | [1] | FILM-INSTRUCTION (BACKHOE) | |
| 18. | 6V-7744 M | [8] | LOCKNUT (M10X1.5-THD) | |
| 19. | 7X-7729 | [8] | WASHER (11X25X3-MM THK) | |
| 20. | 8C-4987 | [4] | PIN-CLEVIS | |
| 21. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 22. | 8T-4133 M | [8] | NUT (M10X1.5-THD) | |
| 23. | 8T-4138 M | [6] | BOLT (M6X1X20-MM) | |
| 24. | 8T-4172 M | [2] | BOLT (M10X1.5X80-MM) | |
| 25. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 26. | 8T-6466 M | [2] | BOLT (M10X1.5X60-MM) | |
| 27. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 28. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 29. | 9X-8256 | [6] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
#SEBP32021143
164-1420: CONTROL GP-HYDRAULIC HAND
164-1420 CONTROL GP-HYDRAULIC HAND
S/N BFP1-17198
EXCAVATOR
PART OF 164-1430 CONVERSION GP-HYD HAND CONTROL
AN ATTACHMENT
S/N BFP1-17198
EXCAVATOR
PART OF 164-1430 CONVERSION GP-HYD HAND CONTROL
AN ATTACHMENT
For full view, you need register
Parts for your 416D BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9X-8256 | [6] | WASHER (6.6X12X2-MM THK) | |
| 2. | 8T-4773 | [10] | BALL JOINT | |
| 3. | 8T-4815 | [2] | ROD END | |
| 4. | 9R-9901 | [6] | FASTENER (CLIP) | |
| 5. | 142-7405 | [2] | COLLAR | |
| 6. | 164-1361 | [2] | BOOT | |
| 7. | 164-1371 | [1] | PLATE | |
| 8. | 164-1399 | [2] | KNOB | |
| 9. | 164-1402 | [2] | SLEEVE | |
| 10. | 164-1404 | [2] | SPACER (10.67X16.95X23-MM THK) | |
| 11. | 164-1409 | [1] | LEVER AS (RH) | |
| 12. | 164-1411 | [1] | LEVER AS (LH) | |
| 13. | 164-1421 | [1] | PLATE | |
| 14. | 164-1422 | [1] | SHAFT AS | |
| 15. | 164-1425 | [1] | COUPLER AS | |
| 16. | 164-1427 | [2] | ROD | |
| 17. | 164-1429 | [1] | COUPLER AS | |
| 18. | 164-1435 | [2] | PLATE | |
| 19. | 164-1438 | [2] | ROD | |
| 20. | 164-1441 | [2] | ROD | |
| 21. | 164-1560 | [1] | TOWER AS | |
| 22. | 167-8248 | [1] | CONSOLE-REAR | |
| 23. | 170-6312 | [4] | BEARING | |
| 24. | 9R-2807 | [2] | CLIP (RETAINER) | |
| 25. | 190-5128 | [1] | FILM-INSTRUCTION (EXCAVATOR CONTROL) | |
| 26. | 6V-7744 M | [14] | LOCKNUT (M10X1.5-THD) | |
| 27. | 6V-8932 M | [2] | SETSCREW-SOCKET (M6X1X10-MM) | |
| 28. | 7X-7729 | [8] | WASHER (11X25X3-MM THK) | |
| 29. | 9R-2806 | [2] | PIN | |
| 30. | 8T-4121 | [20] | WASHER-HARD (11X21X2.5-MM THK) | |
| 31. | 8T-4133 M | [16] | NUT (M10X1.5-THD) | |
| 32. | 8T-4138 M | [6] | BOLT (M6X1X20-MM) | |
| 33. | 8T-4172 M | [2] | BOLT (M10X1.5X80-MM) | |
| 34. | 8T-4195 M | [6] | BOLT (M10X1.5X30-MM) | |
| 35. | 8T-6466 M | [2] | BOLT (M10X1.5X60-MM) | |
| 36. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 37. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| M | METRIC PART | |||
#SEBP32021144
164-1440: CONTROL GP-HYDRAULIC HAND
164-1440 CONTROL GP-HYDRAULIC HAND
S/N BFP1-17198
STANDARD, CROSS
PART OF 164-1450 CONTROL GP-HYDRAULIC HAND
S/N BFP1-17198
STANDARD, CROSS
PART OF 164-1450 CONTROL GP-HYDRAULIC HAND
For full view, you need register
Parts for your 416D BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4773 | [4] | BALL JOINT | |
| 2. | 8T-4815 | [4] | ROD END | |
| 3. | 9R-9901 | [6] | FASTENER (CLIP) | |
| 4. | 164-1361 | [2] | BOOT | |
| 5. | 164-1371 | [1] | PLATE | |
| 6. | 164-1399 | [2] | KNOB | |
| 7. | 164-1406 | [2] | ROD | |
| 8. | 164-1441 | [2] | ROD | |
| 9. | 164-1447 | [1] | LEVER AS | |
| 10. | 164-1451 | [1] | BRACKET AS | |
| 11. | 164-1452 | [1] | BRACKET AS | |
| 12. | 164-1455 | [1] | LEVER AS | |
| 13. | 164-1565 | [1] | TOWER AS | |
| 14. | 167-8248 | [1] | CONSOLE-REAR | |
| 15. | 179-8235 | [4] | LOCK PIN | |
| 16. | 239-9436 | [1] | PLATE-WARNING (ALTERNATE PATTERN CONTROL) | |
| 17. | 190-5134 | [2] | FILM-IDENTIFICATION (STD CROSS PATTERN) | |
| 18. | 6V-7744 M | [4] | LOCKNUT (M10X1.5-THD) | |
| 19. | 8C-4987 | [4] | PIN-CLEVIS | |
| 20. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 21. | 8T-4133 M | [8] | NUT (M10X1.5-THD) | |
| 22. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 23. | 8T-4224 | [8] | WASHER-HARD (8.8X16X2-MM THK) | |
| 24. | 8T-7547 M | [8] | BOLT (M8X1.25X30-MM) | |
| 25. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 26. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| M | METRIC PART | |||
#SEBP32021145
164-1450: CONTROL GP-HYDRAULIC HAND
For full view, you need register
Parts for your 416D BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 164-1440 Y | [1] | CONTROL GP-HYDRAULIC HAND | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32021146
164-1500: CONTROL GP-HYDRAULIC HAND
164-1500 CONTROL GP-HYDRAULIC HAND -3-FUNCTION, WITH PEDAL SWING
S/N BFP1-17198
PART OF 164-1510 CONVERSION GP-HYD HAND CONTROL
AN ATTACHMENT
S/N BFP1-17198
PART OF 164-1510 CONVERSION GP-HYD HAND CONTROL
AN ATTACHMENT
For full view, you need register
Parts for your 416D BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8F-7702 | [4] | SEAL-LIP TYPE | |
| 2. | 8T-6431 | [2] | ROD END | |
| 3. | 142-7405 | [2] | COLLAR | |
| 4. | 164-1373 | [1] | PLATE | |
| 5. | 164-1397 | [3] | KNOB | |
| 6. | 164-1427 | [1] | ROD | |
| 7. | 164-1441 | [1] | ROD | |
| 8. | 164-1501 | [1] | LEVER AS (BUCKET) | |
| 9. | 164-1502 | [1] | LEVER AS (STICK) | |
| 10. | 164-1503 | [1] | LEVER AS (BOOM) | |
| 11. | 164-1514 | [2] | ROD | |
| 12. | 164-1521 | [1] | SHAFT AS | |
| 13. | 164-1523 | [2] | BEARING | |
| 14. | 164-1525 | [1] | ROD | |
| 15. | 164-1526 | [1] | GASKET | |
| 16. | 164-1570 | [1] | TOWER AS | |
| 17. | 183-4994 | [1] | CONSOLE-REAR | |
| 18. | 186-1583 | [1] | ROD END AS | |
| 19. | 190-5129 | [1] | FILM (BUCKET CONTROL) | |
| 20. | 241-4954 | [1] | GUARD (RH) | |
| 21. | 241-4955 | [1] | GUARD (LH) | |
| 22. | 117-5672 | [3] | BOOT | |
| 23. | 136-7439 B | [2] | SPACER (20X40X3-MM THK) | |
| 24. | 136-7440 B | [2] | SHIM (1-MM THK) | |
| 25. | 164-1515 | [2] | SUPPORT AS | |
| 26. | 164-1517 | [2] | SHAFT AS-PEDAL | |
| 27. | 164-1519 | [1] | SHAFT-LEVER | |
| 28. | 164-1527 | [2] | SEAL | |
| 29. | 164-1541 | [1] | PEDAL AS (RH) | |
| 30. | 164-1551 | [1] | PEDAL AS (LH) | |
| 31. | 179-8235 | [4] | LOCK PIN | |
| 32. | 5P-4115 | [6] | WASHER-HARD (7.2X19X2-MM THK) | |
| 33. | 6V-7744 M | [6] | LOCKNUT (M10X1.5-THD) | |
| 34. | 6V-8335 M | [2] | BOLT-SELF-LOCKING (M10X1.5X40-MM) | |
| 35. | 6V-8932 M | [2] | SETSCREW-SOCKET (M6X1X10-MM) | |
| 36. | 8C-4987 | [4] | PIN-CLEVIS | |
| 37. | 8M-3175 | [4] | WASHER-HARD (10.2X16X3-MM THK) | |
| 38. | 8T-4121 | [13] | WASHER-HARD (11X21X2.5-MM THK) | |
| 39. | 8T-4133 M | [11] | NUT (M10X1.5-THD) | |
| 40. | 8T-4138 M | [6] | BOLT (M6X1X20-MM) | |
| 41. | 8T-4186 M | [2] | BOLT (M10X1.5X40-MM) | |
| 42. | 8T-4195 M | [6] | BOLT (M10X1.5X30-MM) | |
| 43. | 8T-4224 | [6] | WASHER-HARD (8.8X16X2-MM THK) | |
| 44. | 8T-4773 | [4] | BALL JOINT | |
| 45. | 8T-4815 | [5] | ROD END | |
| 46. | 8T-4908 M | [4] | BOLT (M8X1.25X25-MM) | |
| 47. | 8T-7547 M | [2] | BOLT (M8X1.25X30-MM) | |
| 48. | 9R-2806 | [2] | PIN | |
| 49. | 9R-2807 | [2] | CLIP (RETAINER) | |
| 50. | 9R-9901 | [6] | FASTENER (CLIP) | |
| 51. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 52. | 9X-2043 M | [4] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP32021147
164-1520: CONTROL GP-HYDRAULIC HAND
164-1520 CONTROL GP-HYDRAULIC HAND
S/N BFP1-17198
4 LEVER FOOT SWING
PART OF 164-1530 CONVERSION GP-HYD HAND CONTROL
AN ATTACHMENT
S/N BFP1-17198
4 LEVER FOOT SWING
PART OF 164-1530 CONVERSION GP-HYD HAND CONTROL
AN ATTACHMENT
For full view, you need register
Parts for your 416D BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8F-7702 | [4] | SEAL-LIP TYPE | |
| 2. | 8T-4773 | [4] | BALL JOINT | |
| 3. | 8T-4815 | [6] | ROD END | |
| 4. | 8T-6431 | [3] | ROD END | |
| 5. | 9R-9901 | [6] | FASTENER (CLIP) | |
| 6. | 101-2788 | [1] | FILM-INSTRUCTION (EXTENDABLE STICK) | |
| 7. | 117-5672 | [4] | BOOT | |
| 8. | 136-7439 B | [5] | SPACER (20X40X3-MM THK) | |
| 9. | 136-7440 B | [1] | SHIM (1-MM THK) | |
| 10. | 142-7405 | [1] | COLLAR | |
| 11. | 164-1372 | [1] | PLATE | |
| 12. | 164-1397 | [4] | KNOB | |
| 13. | 164-1427 | [1] | ROD | |
| 14. | 164-1441 | [1] | ROD | |
| 15. | 164-1501 | [1] | LEVER AS (BUCKET) | |
| 16. | 164-1502 | [1] | LEVER AS (STICK) | |
| 17. | 164-1503 | [1] | LEVER AS (BOOM) | |
| 18. | 164-1511 | [1] | LEVER AS (EXTENDABLE STICK) | |
| 19. | 164-1514 | [3] | ROD | |
| 20. | 164-1515 | [2] | SUPPORT AS | |
| 5V-4410 | [2] | BUSHING | ||
| 21. | 164-1517 | [2] | SHAFT AS-PEDAL | |
| 22. | 164-1519 | [1] | SHAFT-LEVER | |
| 23. | 164-1521 | [1] | SHAFT AS | |
| 24. | 164-1523 | [2] | BEARING | |
| 25. | 164-1525 | [1] | ROD | |
| 26. | 164-1526 | [1] | GASKET | |
| 27. | 164-1527 | [2] | SEAL | |
| 28. | 164-1541 | [1] | PEDAL AS (RH) | |
| 29. | 164-1551 | [1] | PEDAL AS (LH) | |
| 30. | 164-1570 | [1] | TOWER AS | |
| 31. | 179-8235 | [5] | LOCK PIN | |
| 32. | 183-4999 | [1] | CONSOLE-REAR | |
| 33. | 186-1583 | [1] | ROD END AS | |
| 34. | 190-5129 | [1] | FILM (BUCKET CONTROL) | |
| 35. | 6V-7744 M | [7] | LOCKNUT (M10X1.5-THD) | |
| 36. | 6V-8335 M | [2] | BOLT-SELF-LOCKING (M10X1.5X40-MM) | |
| 37. | 6V-8932 M | [1] | SETSCREW-SOCKET (M6X1X10-MM) | |
| 38. | 8C-4987 | [5] | PIN-CLEVIS | |
| 39. | 8M-3175 | [3] | WASHER-HARD (10.2X16X3-MM THK) | |
| 40. | 8T-4121 | [14] | WASHER-HARD (11X21X2.5-MM THK) | |
| 41. | 8T-4133 M | [13] | NUT (M10X1.5-THD) | |
| 42. | 8T-4186 M | [3] | BOLT (M10X1.5X40-MM) | |
| 43. | 8T-4195 M | [6] | BOLT (M10X1.5X30-MM) | |
| 44. | 8T-4224 | [6] | WASHER-HARD (8.8X16X2-MM THK) | |
| 45. | 8T-4908 M | [4] | BOLT (M8X1.25X25-MM) | |
| 46. | 8T-7547 M | [2] | BOLT (M8X1.25X30-MM) | |
| 47. | 9R-2806 | [2] | PIN | |
| 48. | 9R-2807 | [2] | CLIP (RETAINER) | |
| 49. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 50. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 51. | 8T-4138 M | [6] | BOLT (M6X1X20-MM) | |
| 52. | 5P-4115 | [6] | WASHER-HARD (7.2X19X2-MM THK) | |
| 53. | 241-4954 | [1] | GUARD (RH) | |
| 54. | 241-4955 | [1] | GUARD (LH) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP32021148
183-3120: CONTROL GP-HYDRAULIC HAND
183-3120 CONTROL GP-HYDRAULIC HAND
S/N BFP1-17198
PART OF 184-7858 CHASSIS AR
S/N BFP1-17198
PART OF 184-7858 CHASSIS AR
For full view, you need register
Parts for your 416D BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1K-0502 B | [7] | WASHER (16.3X25.4X1.2-MM THK) | |
| 2. | 2R-0364 | [3] | RING-RETAINING | |
| 3. | 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | |
| 4. | 5H-3193 | [1] | PIN-SPRING | |
| 5. | 8T-4766 | [1] | ROD END | |
| 6. | 8T-4773 | [1] | BALL JOINT | |
| 7. | 8T-4815 | [2] | ROD END | |
| 8. | 9R-1765 | [1] | COVER-TOP | |
| 9. | 9R-1766 | [1] | COVER-BOTTOM | |
| 10. | 9R-1767 | [1] | BOOT | |
| 11. | 9R-9868 | [1] | SWITCH GP-PUSH BUTTON (NEUTRALIZER, DOWNSHIFT) | |
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 12. | 107-5591 | [1] | NUT-JAM (3/4-16-THD) | |
| 13. | 134-0453 M | [2] | TURNBUCKLE (M10X1.5X50-MM) | |
| 14. | 140-6021 | [1] | PLATE | |
| 15. | 164-1368 | [8] | FASTENER (CLIP) | |
| 16. | 164-1369 | [1] | PLATE | |
| 17. | 179-8235 | [1] | LOCK PIN | |
| 18. | 183-3121 | [1] | BRACKET AS | |
| 19. | 183-3122 | [1] | LEVER AS | |
| 20. | 183-3131 | [1] | DAMPER AS | |
| 095-9230 | [1] | PIN-SPRING | ||
| 183-3132 | [1] | CYLINDER | ||
| 21. | 183-3135 | [1] | JOINT AS | |
| 183-3136 | [1] | BUSHING | ||
| 22. | 183-3137 | [1] | PIN | |
| 23. | 183-3153 | [1] | ROD | |
| 24. | 183-3155 | [1] | ROD | |
| 25. | 183-3156 | [1] | ROD | |
| 26. | 201-8069 | [1] | SEAL | |
| 27. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 28. | 3S-2093 | [1] | STRAP-CABLE | |
| 29. | 6V-7744 M | [2] | LOCKNUT (M10X1.5-THD) | |
| 30. | 8C-4987 | [1] | PIN-CLEVIS | |
| 31. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 32. | 8T-4133 M | [8] | NUT (M10X1.5-THD) | |
| 33. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 34. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 35. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 36. | 8T-9501 | [2] | SCREW (10-16X0.75-IN) | |
| 37. | 9R-2807 | [1] | CLIP (RETAINER) | |
| 38. | 9R-3067 | [1] | PIN | |
| 39. | 9X-2065 M | [2] | NUT (M10X1.5-THD, LH) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP32021149
183-3150: CONTROL GP-HYDRAULIC HAND
183-3150 CONTROL GP-HYDRAULIC HAND
S/N BFP1-17198
PART OF 186-5333 HYDRAULIC AR
AN ATTACHMENT
S/N BFP1-17198
PART OF 186-5333 HYDRAULIC AR
AN ATTACHMENT
For full view, you need register
Parts for your 416D BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1K-0502 | [3] | WASHER (16.3X25.4X1.2-MM THK) | |
| 2. | 2R-0364 | [1] | RING-RETAINING | |
| 3. | 8T-4773 | [1] | BALL JOINT | |
| 4. | 8T-4815 | [1] | ROD END | |
| 5. | 134-0453 M | [1] | TURNBUCKLE (M10X1.5X50-MM) | |
| 6. | 164-1395 | [1] | KNOB | |
| 7. | 179-8235 | [1] | LOCK PIN | |
| 8. | 183-3151 | [1] | LEVER AS | |
| 183-3136 | [1] | BUSHING | ||
| 9. | 183-3153 | [1] | ROD | |
| 10. | 183-3156 | [1] | ROD | |
| 11. | 8C-4987 | [1] | PIN-CLEVIS | |
| 12. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 13. | 8T-4133 M | [3] | NUT (M10X1.5-THD) | |
| 14. | 9X-2065 M | [1] | NUT (M10X1.5-THD, LH) | |
| M | METRIC PART | |||
