174-2024 WIPER GP-WINDOW S/N BNB1-699; BLL1-650 PART OF 184-9742, 184-9743 CAB AR-ENCLOSED ROPS AN ATTACHMENT 428D

OPERATOR STATION

WIPER GP-WINDOW

0. 174-2024 WIPER GP-W

SERVICE EQUIPMENT AND SUPPLIES

CHARTS & FILMS

1. 186-6375 FILM GP

TOOLS

2. 113-0018 INSTALLATI

WORK TOOLS

BUCKET GP

3. 175-7877 LINK GP-SH

SERVICE EQUIPMENT AND SUPPLIES

PROTECTION GP

4. 134-8204 LOCK GP-VA

CHARTS & FILMS

5. 124-5482 PLATE & FI
6. 185-7138 PLATE & FI
7. 185-7740 PLATE & FI
8. 185-7753 PLATE & FI
9. 185-7756 PLATE & FI
0. INFORMATION

BACKHOE LOADER 428D BACKHOE LOADER BLL
428D Backhoe Loader BLL00001-00650 (MACHINE) POWERED BY 3054 Engine SEBP3208 428D BLL (1999)

OPERATOR STATION

WIPER GP-WINDOW

186-2589 MOTOR GP-WINDOW WIPER

174-2024 WIPER GP-WINDOW

#SEBP32080670

174-2024: WIPER GP-WINDOW

WIPER GP-WINDOW

174-2024 WIPER GP-WINDOW
S/N BNB1-699; BLL1-650
PART OF 184-9742, 184-9743 CAB AR-ENCLOSED ROPS
AN ATTACHMENT

i01373801 SEBP3208

For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6K-0806	[1]	STRAP-CABLE
2.	8T-4970 M	[5]	BOLT (M6X1X14-MM)
3.	101-0745	[2]	BLADE AS-WIPER (600-MM)
4.	132-2249	[2]	SPACER (7.4X12.7X24-MM THK)
5.	132-2250	[1]	SPACER (21X35X10-MM THK)
6.	154-5410	[1]	ARM-WINDOW WIPER
7.	174-2025	[1]	MOTOR GP-WINDOW WIPER (REAR)
	186-3735	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
8.	174-2026 J	[1]	ARM AS-WIPER
	194-5171 E		HOSE (33-CM)
9.	174-5456	[1]	PLATE
10.	186-2589 Y	[1]	MOTOR GP-WINDOW WIPER (FRONT)
11.	8C-8451 M	[2]	BOLT (M6X1X40-MM)
12.	8T-4205	[7]	WASHER-HARD (7.2X14.5X2-MM THK)

			AVAILABLE REPAIR KIT(S):
	163-4759 J	[1]	KIT-REPAIR (WINDOW WIPER ARM)
	E		ORDER BY THE CENTIMETER
	J		KIT MARKED J AVAILABLE FOR PART MARKED J
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP32080671

186-6375: FILM GP

FILM GP

186-6375 FILM GP
S/N BNB1-699; BLL1-650
PART OF 185-7740, 185-7753 PLATE & FILM GP

i01478662 SEBP3208

For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	186-5273	[1]	FILM-IDENTIFICATION (428D, RH)(RH)
2.	101-0003	[8]	FASTENER
3.	3E-8123	[1]	FILM-IDENTIFICATION (CAT, RH)
4.	3E-8124	[1]	FILM-IDENTIFICATION (CAT, LH)
5.	186-5274	[1]	FILM-IDENTIFICATION (428D, LH)

	177-9600 AF	[2]	FILM-IDENTIFICATION (PREMIER)
	A		NOT PART OF THIS GROUP
	F		NOT SHOWN

#SEBP32080672

113-0018: INSTALLATION AR-WHEEL CHOCK

INSTALLATION AR-WHEEL CHOCK

113-0018 INSTALLATION AR-WHEEL CHOCK
S/N BNB1-699; BLL1-650
PART OF 149-1833, 206-3409, 206-4924 CONVERSION AR-CERTIFICATION
AN ATTACHMENT

i00526058 SEBP3208

1130018 INSTALLATION AR-WHEEL CHOCK Parts scheme

For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	114-9342	[2]	CHOCK GP-WHEEL
2.	130-7452	[2]	PLATE

#SEBP32080673

175-7877: LINK GP-SHIPPING

LINK GP-SHIPPING

175-7877 LINK GP-SHIPPING
S/N BNB1-699; BLL1-650
PART OF 185-1990, 185-1991, 185-1992, 185-1993, 186-1442, 186-1443, 186-1444, 186-1445 BACKHOE AR-EXTENDABLE STICK, 185-1984, 185-1985, 185-1986, 185-1987, 185-1988, 185-1989, 186-1437, 186-1439, 186-1440, 186-1441 BACKHOE AR-STANDARD STICK
AN ATTACHMENT

i01190768 SEBP3208

For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	120-9286	[1]	PLATE

			PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY

#SEBP32080674

134-8204: LOCK GP-VANDALISM

LOCK GP-VANDALISM

134-8204 LOCK GP-VANDALISM
S/N BNB1-699; BLL1-650
SINGLE TILT
AN ATTACHMENT

i00511482 SEBP3208

For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5P-8502	[2]	PADLOCK GP
			(EACH INCLUDES)
	5P-8500	[1]	KEY
	8Y-6364	[1]	SLEEVE

#SEBP32080675

124-5482: PLATE & FILM AR

PLATE & FILM AR

124-5482 PLATE & FILM AR
S/N BNB1-699; BLL1-650
PART OF 149-1833 CONVERSION AR-CERTIFICATION
AN ATTACHMENT

i00517557 SEBP3208

For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	131-6010	[1]	FILM-INSTRUCTION (WHEEL CHOCK)
2.	106-0827	[4]	FILM-IDENTIFICATION (20-KM/H)

#SEBP32080676

185-7138: PLATE & FILM GP

PLATE & FILM GP

185-7138 PLATE & FILM GP
S/N BNB1-699; BLL1-650
PART OF 184-7870, 185-5790 CHASSIS AR

i01367678 SEBP3208

For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
239-6989	[1]	PLATE-SERIAL NUMBER (MACHINE)
		(CONCEALED ON LOWER RH SIDE FRAME RAIL)
225-4150	[1]	PLATE-SERVICE INFORMATION (MACHINE)
		(TO LOCATE THIS PLATE SEE CHART-LOCATION)

199-6245	[1]	FILM-INFORMATION (WATER SEPARATOR)
		(ON SIDE OF FUEL TANK FROM BOTTOM EDGE 40-MM UP, OVER FROM BACK EDGE 20-MM)
101-0333	[1]	FILM-IDENTIFICATION (HYDRAULIC OIL)
		(ON BRAKE FLUID RESERVOIR CAP)
124-2456	[1]	FILM-INSTRUCTION (NO STEP)
		(ON INSIDE OF BATTERY BOX DOOR WITH BOTTOM EDGE OF DECAL 90-MM FROM TOP EDGE COVER
		& RIGHT SIDE OF DECAL IS 75-MM FROM RIGHT SIDE OF BOX)
169-4868	[2]	FILM-WARNING (NO CLEARANCE, STAY BACK)
		(ON BOOM 700-MM UP FROM CENTER LINE BOOM FOOT PIN BORE & 100-MM OVER FROM BOTTOM WRAPPER PLATE))
191-9108	[2]	FILM-WARNING (RADIATOR)
		(ON BOTH SIDES OF FRONT BAFFLE PLATE ON LH SIDE OF THE MACHINE. LOCATE 20-MM FROM BOTTOM OF
		BAFFLE PLATE & 5-MM FROM SIDE FRAME RAIL)
209-4121	[2]	FILM-WARNING (NO EXIT)
		(FOR CENTER PIVOT MACHINES, ON CAB STRUCTURE IN REAR AT THE BOTTOM 20-MM +/- 5 FROM BOTTOM
		EDGE & 190-MM +/- 5 FROM OUTER EDGE FOR EACH FILM)
		(FOR SIDESHIFT MACHINES, ONE ON EACH POST ON THE SLIDEFRAME, CENTRALISED AND 25-MM +/- 5
		DOWN FROM THE TOP HITCH PLATE)
8C-3274	[1]	FILM-IDENTIFICATION (BUCKET)
		(ON UPPER RH LOADER ARM BOSS ALIGNED WITH BUCKET INDICATOR POINTER)

#SEBP32080677

185-7740: PLATE & FILM GP

PLATE & FILM GP

185-7740 PLATE & FILM GP
S/N BLL1-650
SINGLE TILT, ALL WHEEL DRIVE
PART OF 184-7870 CHASSIS AR

i01397720 SEBP3208

For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
Y	[1]	FILM GP

Y		SEPARATE ILLUSTRATION

#SEBP32080678

185-7753: PLATE & FILM GP

PLATE & FILM GP

185-7753 PLATE & FILM GP
S/N BNB1-699
SINGLE TILT, NARROW FRAME, ALL WHEEL DRIVE
PART OF 185-5790 CHASSIS AR

i01397746 SEBP3208

For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
Y	[1]	FILM GP

A	[1]	PLATE-SERIAL NUMBER (ENGINE)

1P-2807	[2]	FILM-IDENTIFICATION (LIFT EYE LOCATION)
		(2-FRONT: ON FRONT SIDE OF FRONT AXLE BETWEEN CHASSIS & WHEEL ASSEMBLY ON LH & RH OF MACHINE)
7X-3229	[2]	FILM-IDENTIFICATION (LIFT EYE, TIE-DOWN LOCATION)
		(ON TIEDOWN/SLING EYE BRACKET ON OUTSIDE OF EACH STABILIZER LEG)
7X-7644	[2]	FILM-IDENTIFICATION (TIE-DOWN)
		(2-FRONT: ON FRONT AXLE SUPPORT PLATE NEAR LH & RH TIEDOWN HOLES)
130-5582	[1]	FILM-WARNING (LIFT ARM BRACE, SINGLE TILT)
		(ON LH LOADER ARM CENTERED BETWEEN CYLINDER MOUNTING PLATE & SERVICE BRACE RETAINER BAR, TOP EDGE OF FILM MUST BE
		PARALLEL TO THE TOP SURFACE OF SERVICE BRACE RETAINER BAR)
A		NOT PART OF THIS GROUP
Y		SEPARATE ILLUSTRATION

#SEBP32080679

185-7756: PLATE & FILM GP

PLATE & FILM GP

185-7756 PLATE & FILM GP -FRENCH
S/N BNB1-699; BLL1-650
AN ATTACHMENT

i01478956 SEBP3208

For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
191-9093	[1]	PLATE-WARNING-ROPS/FOPS
		(ON UPPER REAR SHEET METAL PANEL ON ROPS STRUCTURE USING HOLES PROVIDED & RIVETS)
B	[2]	PLATE-WARNING (SECURE EXTENDABLE STICK)
		(ON THE LINES GP-EXTENDABLE STICK WHEN MACHINE IS EQUIPPED WITH AN EXTENDABLE STICK OPTION)

4S-8264	[2]	RIVET-POP

3E-8186	[1]	FILM-NOTICE (ENGINE STARTING)
		(CENTERED ABOVE WARNING FILM ON INSIDE OF BATTERY BOX DOOR)
101-0568	[1]	FILM-WARNING (JUMP START, READ OMM)
		(BATTERY STORAGE - ON INSIDE OF BATTERY BOX DOOR, WITH LOWER EDGE OF FILM 75-MM FROM TOP OF DOOR & RIGHT EDGE OF FILM
		260-MM FROM RIGHT EDGE OF DOOR. ORIENT FILM SUCH THAT IT CAN BE READ WHEN STANDING ON GROUND FACING BATTERY BOX)
		(BATTERY NON STORAGE - ON THE LEFT INSIDE FACE OF THE BOX WITH THE TOP EDGE OF THE FILM 45-MM FROM THE TOP EDGE OF THE
		BOX & THE RIGHT EDGE OF THE FILM 320-MM FROM THE BACK CORNER)
196-4852 B	[1]	FILM-WARNING (CONTROL PATTERN SELECT)
		(ON CONTROL GP-PILOT WHEN EQUIPPED WITH SWITCHING VALVE ON CENTER PIVOT MACHINES. ON LH B POST UP FROM B POST FLANGE
		PLATE 530-MM)
196-4866 B	[1]	FILM-WARNING (CONTROL PATTERN SELECT)
		(ON LINES GP-VALVE WHEN EQUIPPED WITH STANDARD CROSS MECHANICAL BACKHOE LOADER CONTROLS)
196-4985 B	[1]	FILM-WARNING (CONTROL PATTERN SELECT)
		(ON LINES GP-PILOT WHEN EQUIPPED WITH SWITCHING VALVE ON SIDESHIFT MACHINES. ON LH B POST UP FROM B POST FLANGE
		PLATE 530-MM)
	[1]	FILM-WARNING (LIFT ARM BRACE, PARALLEL LIFT)
		(ON LH LOADER ARM ON CYLINDER MOUNTING PLATE. 20-MM FORWARD OF THE SERVICE BRACE
		MOUNTING BRACKET & TOP EDGE PARALLEL WITH TOP OF PLATE)
133-8502	[1]	FILM-WARNING (LIFT ARM BRACE, SINGLE TILT)
		(ON LH LOADER ARM CENTERED BETWEEN CYLINDER MOUNTING PLATE & SERVICE BRACE RETAINER
		BAR WITH BOTTOM EDGE OF FILM TANGENT TO BOTTOM RADIUS OF LOADER ARM)
174-3335	[1]	FILM-WARNING (QCPLR, STG AID, READ OMM)
		(ON RH B POST IN SMOOTH AREA PROVIDED)
B		USE AS REQUIRED