AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

186-0306 WIRING GP-CAB S/N BNS1-1117 PART OF 185-5789 CHASSIS AR 428D BACKHOE LOADER


ELECTRICAL AND STARTING SYSTEM
WIRING GP

BACKHOE LOADER 428D BACKHOE LOADER BMT
 428D Backhoe Loader BMT00001-01617 (MACHINE) POWERED BY 3054 Engine SEBP3209 428D BMT   (1999)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-CAB
185-8801 WIRING GP-CAB
WIRING GP-CAB
185-8802 WIRING GP-CAB
WIRING GP-CAB
186-0306 WIRING GP-CAB
WIRING GP-CAB
194-1950 WIRING GP-CAB
WIRING GP-CONSOLE
169-0623 WIRING GP-CONSOLE
WIRING GP-CONSOLE
169-0624 WIRING GP-CONSOLE
 

#SEBP32090200
 

186-0306: WIRING GP-CAB

186-0306 WIRING GP-CAB
S/N BNS1-1117
PART OF 185-5789 CHASSIS AR
i01366845 SEBP3209
1860306 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-8491 [1] FUSE (15-AMPERE)  
2. 169-0595 [1] SWITCH AS-ROCKER (BEACON)  
  111-7899 [1] GASKET  
3. 178-7539 [1] RECEPTACLE AS (POWER SUPPLY)  
4. 179-5435 [1] FLANGE  
5. 3E-6922 [2] SCREW-RECESS FLAT HEAD (6-19X0.5-IN)  
6. 146-9439 B [1] RELAY AS (12-VOLT)  
  B   USE AS REQUIRED
 

#SEBP32090201
 

194-1950: WIRING GP-CAB

194-1950 WIRING GP-CAB
S/N BNS1-1117; BMT1-1617
AN ATTACHMENT
i01481511 SEBP3209
1941950 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-9362 [2] RELAY AS (12-VOLT)(DEAD ENGINE LOWER)  
2. 3S-2093 [24] STRAP-CABLE  
3. 106-8704 [1] SUPPRESSOR AS-ARC  
4. 113-8490 [1] FUSE (10-AMPERE)  
5. 193-8639 [1] SWITCH AS (DEAD ENGINE LOWER)  
  111-7899 [1] GASKET  
6. 194-1937 [1] HARNESS AS-RIDE CONTROL (FRAME, RIGHT SIDE)(DEAD ENGINE LOWER)  
7. 194-1938 [1] HARNESS AS-RIDE CONTROL (SIDE CONSOLE)  
8. 194-1940 [1] HARNESS AS-PLATFORM  
9. 194-1941 [1] HARNESS AS-RIDE CONTROL (FRONT CONSOLE)  
10. 138-8454 M [2] SCREW-TRUSS HEAD (M4X0.7X10-MM)  
11. 4B-4863 [2] WASHER (4.7X11X1.2-MM THK)  
  M   METRIC PART
 

#SEBP32090202
 

169-0623: WIRING GP-CONSOLE

169-0623 WIRING GP-CONSOLE
S/N BNS1-1117; BMT1-1617
SIDE, BASIC
PART OF 184-9742 CAB AR-ENCLOSED ROPS, 184-9741 CANOPY AR-OPEN ROPS
AN ATTACHMENT
i01341182 SEBP3209
1690623 WIRING GP-CONSOLE Parts scheme 1690623 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 B [11] STRAP-CABLE  
2. 142-8858 J [1] SWITCH AS-START (KEY)  
  167-1530 [1] NUT (1-32-THD)  
3. 144-9930 Y [1] MODULE GP-WARNING INDICATOR (WITH ALARM, FUNCTION LIGHTS)  
4. 157-1997 [2] SPACER (4.34X15.88X6.34-MM THK)  
5. 167-3702 [1] HARNESS AS-CONSOLE  
6. 169-0586 [1] SWITCH AS-ROCKER (STARTING AID)(THERMOSTART)  
  111-7899 [1] GASKET  
7. 172-9200 [1] SUPPRESSOR-ARC  
8. 184-5293 B [1] PLUG  
9. 187-1644 B [6] PLUG  
10. 193-1509 [1] WIRE AS  
11. 116-7491 [1] ANCHOR  
12. 132-5789 [3] CLIP (LADDER)  
13. 134-2305 [3] SEAL  
14. 170-6305 [1] GAUGE GP-FUEL LEVEL (FUEL LEVEL)  
  4B-2043 [3] NUT (8-32-THD)  
  7X-9065 [1] LAMP (12-VOLT)  
  9B-7233 [3] LOCKWASHER  
15. 170-6306 [1] GAUGE GP-COOLANT TEMPERATURE  
  4B-2043 [3] NUT (8-32-THD)  
  7X-9065 [1] LAMP (12-VOLT)  
  9B-7233 [3] LOCKWASHER  
16. 170-6542 [1] GAUGE GP-OIL TEMPERATURE (TORQUE CONVERTER)  
  4B-2043 [3] NUT (8-32-THD)  
  7X-9065 [1] LAMP (12-VOLT)  
  9B-7233 [3] LOCKWASHER  
17. 191-9104 [1] FILM-INSTRUCTION (START SWITCH)  
18. 196-2966 [1] PLUG  
19. 198-0099 [1] FILM-IDENTIFICATION (INDICATOR)  
20. 3C-1878 M [1] SCREW-MACHINE (M6X1X10-MM)  
21. 7K-1181 B [3] STRAP-CABLE  
22. 8T-2659 M [2] LOCKNUT (M4X0.7-THD)  
23. 8T-4133 M [3] NUT (M10X1.5-THD)  
24. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
  B   USE AS REQUIRED
  J   REQUIRES A 5P8500 KEY
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32090203
 

169-0624: WIRING GP-CONSOLE

169-0624 WIRING GP-CONSOLE
S/N BNS1-1117; BMT1-1617
DELUXE
PART OF 184-9743 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
i01385752 SEBP3209
1690624 WIRING GP-CONSOLE Parts scheme 1690624 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 B [12] STRAP-CABLE  
2. 7X-8549 [1] SWITCH AS-PRESSURE (HYDRAULIC OIL FILTER BYPASS)  
  3J-1907 [1] SEAL-O-RING  
3. 110-7887 [1] SWITCH AS-START (KEY)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  7T-6799 [1] NUT-MOUNTING (1-32-THD)  
4. 157-1997 [2] SPACER (4.34X15.88X6.34-MM THK)  
5. 167-3702 [1] HARNESS AS-CONSOLE  
  142-9117 [8] CONNECTOR (10-PIN)  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [3] PIN-CONNECTOR (14-GA TO 16-GA)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8L-8413 [59] STRAP-CABLE (WHITE)  
  8T-8737 [5] PLUG-SEAL  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [2] KIT-CONNECTING PLUG (6-PIN)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  167-3693 [1] PLUG AS-CONNECTOR (31-PIN)  
  9X-3402 [63] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  128-2016 [4] TERMINAL  
  2L-8076 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)  
  5P-4571 [4] TERMINAL-BLADE (14-GA TO 16-GA)  
  112-9611 [14] TERMINAL-BLADE (18-GA TO 20-GA)  
  3E-9179 [10] TERMINAL-RECEPTACLE (14-GA TO 18-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)  
6. 169-0586 [1] SWITCH AS-ROCKER (STARTING AID)(THERMOSTART)  
  111-7899 [1] GASKET  
7. 172-9200 [1] SUPPRESSOR-ARC  
8. 184-5293 B [1] PLUG  
9. 187-1644 B [6] PLUG  
10. 189-0148 [1] MODULE GP-WARNING INDICATOR  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  193-0742 [1] GASKET  
11. 193-1509 [1] WIRE AS  
12. 194-4414 [1] HARNESS AS-PANEL (HYD TIMER)  
  9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [4] PIN-CONNECTOR (14-GA TO 16-GA)  
  8L-8413 [1] STRAP-CABLE (WHITE)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
13. 116-7491 [1] ANCHOR  
14. 132-5789 [3] CLIP (LADDER)  
15. 134-2305 [4] SEAL  
16. 170-6305 [1] GAUGE GP-FUEL LEVEL (FUEL LEVEL)  
  4B-2043 [3] NUT (8-32-THD)  
  7X-9065 [1] LAMP (12-VOLT)(FUEL LEVEL INDICATOR)  
  9B-7233 [3] LOCKWASHER  
17. 226-7164 [1] GAUGE GP-COOLANT TEMPERATURE  
  4B-2043 [6] NUT (8-32-THD)  
  7X-9065 [1] LAMP (12-VOLT)(WATER LEVEL INDICATOR)  
  9B-7233 [3] LOCKWASHER  
18. 170-6309 [1] VOLTMETER GP  
  4B-2043 [3] NUT (8-32-THD)  
  7X-9065 [1] LAMP (12-VOLT)  
  9B-7233 [3] LOCKWASHER  
19. 170-6542 [1] GAUGE GP-OIL TEMPERATURE (TORQUE CONVERTER)  
  4B-2043 [3] NUT (8-32-THD)  
  7X-9065 [1] LAMP (12-VOLT)  
  9B-7233 [3] LOCKWASHER  
20. 172-6224 [1] FILM-IDENTIFICATION (MACHINE SYSTEMS INFORMATION)  
21. 189-4920 [1] RELAY AS-TIMER (12-VOLT)  
22. 191-9104 [1] FILM-INSTRUCTION (START SWITCH)  
23. 3C-1878 M [1] SCREW-MACHINE (M6X1X10-MM)  
24. 7K-1181 B [3] STRAP-CABLE  
25. 8T-2659 M [2] LOCKNUT (M4X0.7-THD)  
26. 8T-4133 M [3] NUT (M10X1.5-THD)  
27. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP32090204
 

169-0625: WIRING GP-CONSOLE

169-0625 WIRING GP-CONSOLE
S/N BNS1-1117; BMT1-1617
FRONT, BASIC
PART OF 184-7869, 185-5789 CHASSIS AR
i01348055 SEBP3209
1690625 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [6] STRAP-CABLE  
2. 144-9931 Y [1] MODULE GP-WARNING INDICATOR (WITHOUT ALARM)  
3. 157-1997 [2] SPACER (4.34X15.88X6.34-MM THK)  
4. 167-3701 [1] HARNESS AS-CONSOLE (FRONT)  
5. 169-0587 [1] SWITCH AS-ROCKER (HORN)  
  111-7899 [1] GASKET  
6. 169-0588 [1] SWITCH AS-ROCKER (TRANSMISSION NEUTRAL LOCK)  
  111-7899 [1] GASKET  
7. 229-8182 [1] SWITCH AS-ROCKER (HAZARD WARNING LIGHTS)  
  111-7899 [1] GASKET  
8. 187-1644 [7] PLUG  
9. 095-0741 M [2] SCREW-MACHINE (M6X1-THD)  
10. 099-0492 M [2] LOCKNUT (M6X1-THD)  
11. 116-7491 [2] ANCHOR  
12. 121-1241 [1] KIT-SERVICE METER  
    (INCLUDES FILM & METER)
13. 188-0863 [1] FILM-IDENTIFICATION (MACHINE SYSTEMS INFORMATION)(CONSOLE)  
14. 8T-2659 M [2] LOCKNUT (M4X0.7-THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32090205
 

186-0309: WIRING GP-CONSOLE

186-0309 WIRING GP-CONSOLE -ALL WHEEL DRIVE
S/N BNS1-1117; BMT1-1617
PART OF 184-7950 DRIVE AR-BACKHOE LOADER
i01389893 SEBP3209
1860309 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [1] STRAP-CABLE  
2. 106-8704 [1] SUPPRESSOR AS-ARC  
3. 141-2759 [1] FUSE (5-AMPERE)  
4. 146-9439 [1] RELAY AS (12-VOLT)  
5. 169-0598 [1] SWITCH AS-ROCKER (ALL WHEEL DRIVE)  
  111-7899 [1] GASKET  
 

#SEBP32090206
 

185-8803: WIRING GP-ENGINE

185-8803 WIRING GP-ENGINE
S/N BNS1-1117; BMT1-1617
PART OF 186-0600 ENGINE AR
Type 1
i01405353 SEBP3209
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3S-2093 [30] STRAP-CABLE  
  4W-9972 [1] SENDER AS-TEMPERATURE (12-VOLT)(TORQUE CONVERTER OIL)  
  4B-2049 [1] NUT (10-32-THD)  
  8F-1434 [1] LOCKWASHER  
  8T-0328 [1] WASHER-HARD (5.5X10X1-MM THK)  
  177-4599 [1] SWITCH AS-TEMPERATURE (COOLANT)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  7K-1181 [2] STRAP-CABLE  
  8T-8799 [1] BOOT (RED)  
  164-9425 [1] HORN AS (12-VOLT, LOW TONE)  
  167-3703 [1] HARNESS AS  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [3] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [9] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  167-3693 [1] PLUG AS-CONNECTOR (31-PIN)  
  177-9641 [1] RECEPTACLE AS  
  175-3070 [1] SENDER AS-TEMPERATURE (12-VOLT)(COOLANT)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  178-8465 [1] HARNESS AS-WIRING (FUEL SHUTOFF)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  100-3320 [1] PLUG AS-CONNECTOR (2-PIN)  
  192-3341 [1] WIRE AS  
  4P-7581 [6] CLIP (LADDER)  
  4P-8134 [5] CLIP (LADDER)  
  5P-4116 [3] WASHER-HARD (8.8X20.5X2-MM THK)  
  8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
  8T-4136 M [1] BOLT (M10X1.5X25-MM)  
  8T-4137 M [5] BOLT (M10X1.5X20-MM)  
  8T-4200 M [1] BOLT (M8X1.25X16-MM)  
  131-0232 [1] COVER  
  187-8936 [1] SENDER AS-FUEL LEVEL  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  M   METRIC PART
 

#SEBP32090207
 

185-8803: WIRING GP-ENGINE

185-8803 WIRING GP-ENGINE
S/N BNS1-1117; BMT1-1617
PART OF 186-0600 ENGINE AR
Type 2
i01405406 SEBP3209
1858803 WIRING GP-ENGINE Parts scheme 1858803 WIRING GP-ENGINE Parts scheme 1858803 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [31] STRAP-CABLE  
2. 4W-9972 [1] SENDER AS-TEMPERATURE (12-VOLT)(TORQUE CONVERTER OIL)  
  4B-2049 [1] NUT (10-32-THD)  
  8F-1434 [1] LOCKWASHER  
  8T-0328 [1] WASHER-HARD (5.5X10X1-MM THK)  
3. 6K-0806 [2] STRAP-CABLE  
4. 7K-1181 [2] STRAP-CABLE  
5. 8T-8737 [12] PLUG-SEAL  
6. 8T-8799 [1] BOOT (RED)  
7. 164-9425 [1] HORN AS (12-VOLT, LOW TONE)  
8. 167-3703 [1] HARNESS AS (ENGINE)  
9. 175-3070 [1] SENDER AS-TEMPERATURE (12-VOLT)(COOLANT)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
10. 178-8465 [1] HARNESS AS-WIRING (FUEL SHUTOFF)  
11. 183-2530 [1] WIRE AS  
12. 192-3341 [1] WIRE AS  
13. 155-2270 KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
14. 203-3219 [1] SWITCH AS-TEMPERATURE (COOLANT)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
15. 102-8802 [2] KIT-RECEPTACLE (2-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
16. 102-8803 [2] KIT-RECEPTACLE (3-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
17. 3J-1907 [1] SEAL-O-RING  
18. 3S-2093 B [1] STRAP-CABLE  
19. 4P-7581 [6] CLIP (LADDER)  
20. 4P-8134 [6] CLIP (LADDER)  
21. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
22. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
23. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
24. 8T-4137 M [5] BOLT (M10X1.5X20-MM)  
25. 8T-4189 BM [1] BOLT (M8X1.25X20-MM)  
26. 8T-4200 M [1] BOLT (M8X1.25X16-MM)  
27. 4P-8134 B [1] CLIP (LADDER)  
28. 5P-4116 B [1] WASHER-HARD (8.8X20.5X2-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP32090208
 

186-2731: WIRING GP-HEATER

186-2731 WIRING GP-HEATER
S/N BNS1-1117; BMT1-1617
PART OF 185-1491 HEATER AR-CAB
AN ATTACHMENT
i01405762 SEBP3209
1862731 WIRING GP-HEATER Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-9362 [1] RELAY AS (12-VOLT)  
2. 3S-2093 [3] STRAP-CABLE  
3. 9R-6247 [2] STRAP-CABLE  
4. 169-0605 [1] SWITCH AS-ROCKER (BLOWER FAN SPEED)  
  111-7899 [1] GASKET  
5. 170-2237 [1] RELAY AS (12-VOLT)(HEATER & AIR COND)  
6. 180-0613 [1] CIRCUIT BREAKER AS (30-AMPERE)(FAN BLOWER)  
7. 184-2422 [1] SWITCH AS-ROCKER (HEATER)(CAB HEATER)  
  111-7899 [1] GASKET  
8. 206-8848 [1] HARNESS AS-HEATER & AIR COND  
9. 138-8454 M [1] SCREW-TRUSS HEAD (M4X0.7X10-MM)  
10. 4B-4863 [1] WASHER (4.7X11X1.2-MM THK)  
  M   METRIC PART
 

#SEBP32090209
 

122-1644: WIRING GP-KICKOUT & POSITIONER

122-1644 WIRING GP-KICKOUT & POSITIONER
S/N BNS1-1117; BMT1-1617
PART OF 112-1827 LOADER AR
i00518917 SEBP3209
1221644 WIRING GP-KICKOUT & POSITIONER Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-7843 Y [1] CONTROL GP-POSITION  
2. 5G-7820 [1] MAGNET AS  
3. 8T-4985 [2] CLAMP-HOSE (M8X1.25X25MM)  
4. 122-1647 [1] BRACKET AS  
5. 122-1648 [1] HARNESS AS-WIRING (KICKOUT, POSITIONER)(BUCKET)  
  102-8803 [2] KIT-RECEPTACLE (3-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
6. 163-6290 B [2] PLATE  
7. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
8. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
9. 8T-4908 M [2] BOLT (M8X1.25X25-MM)  
10. 3S-2093 B [14] STRAP-CABLE  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
3054 Engine
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 428D :

WIRING GP-CAB
185-8802 WIRING GP-CAB
WIRING GP-CAB
185-8801 WIRING GP-CAB
WIRING GP-AUTOSHIFT
185-8809 WIRING GP-AUTOSHIFT
WIRING GP-AIR CONDITIONER
202-6107 WIRING GP-AIR CONDITIONER
WIRING GP-AIR CONDITIONER
186-2730 WIRING GP-AIR CONDITIONER
WARNING GP-BACKUP
193-2343 WARNING GP-BACKUP
SWITCH GP-PRESSURE
130-4653 SWITCH GP-PRESSURE
STARTING MOTOR GP-ELECTRIC
143-0539 STARTING MOTOR GP-ELECTRIC
WIRING GP-CAB
194-1950 WIRING GP-CAB
WIRING GP-CONSOLE
169-0623 WIRING GP-CONSOLE
WIRING GP-CONSOLE
169-0624 WIRING GP-CONSOLE
WIRING GP-CONSOLE
169-0625 WIRING GP-CONSOLE
WIRING GP-CONSOLE
186-0309 WIRING GP-CONSOLE
185-8803 WIRING GP-ENGINE
WIRING GP-ENGINE
185-8803 WIRING GP-ENGINE
WIRING GP-HEATER
186-2731 WIRING GP-HEATER

Truck sale:

Caterpillar 428D
 
Caterpillar 428D
- backhoe loader
BERGERAT MONNOYEUR SP. Z O.O.
 
 
Caterpillar 428D, Construction
- backhoe loader
BERGERAT MONNOYEUR S.A.S.
Belgium
 
 
Caterpillar 428D, Construction
- backhoe loader
BERGERAT MONNOYEUR S.A.S.
Belgium
 
 
Caterpillar 428D, Construction
- backhoe loader
BERGERAT MONNOYEUR S.A.S.
Belgium
Caterpillar 428D, Construction
 
Caterpillar 428D, Construction
- backhoe loader
WILLIAM ADAMS PTY. LTD.
Australia
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.