185-0061 HYDRAULIC AR -GENERAL PURPOSE BUCKET-LOCKS S/N BNS1-1117; BMT1-1617 2 BANK, PARALLEL LIFT AN ATTACHMENT 428D

Part No	Qty	Parts name
164-1363	[1]	BOOT
186-5298	[1]	FILM-INSTRUCTION (BUCKET CONTROL)
183-8552 Y	[1]	LINES GP-LOAD CONTROL VALVE
185-1598 Y	[1]	MOUNTING GP-BANK VALVE
119-4595 Y	[1]	MOUNTING GP-BUCKET
211-3372	[1]	SWITCH GP
130-2758	[1]	HOUSING-SWITCH
130-2759	[1]	HOUSING-DETENT
131-0379	[1]	SWITCH AS (HYDRAULIC LOCK)
102-8803	[1]	KIT-RECEPTACLE (3-PIN)
		(KIT INCLUDES RECEPTACLE AS.& WEDGE)
3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
185-5913 Y	[1]	VALVE GP-BANK 2
Y		SEPARATE ILLUSTRATION

#SEBP32090381

185-0062: HYDRAULIC AR

HYDRAULIC AR

185-0062 HYDRAULIC AR -MULTIPURPOSE BUCKET
S/N BNS1-1117; BMT1-1617
3 BANK, PARALLEL LIFT
AN ATTACHMENT

i01440677 SEBP3209

For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
183-3159 Y	[1]	CONTROL GP-HYDRAULIC HAND
189-8797 Y	[1]	LINES GP-LIFT CYLINDER
112-6403 Y	[1]	LINES GP-LOADER AUXILIARY
189-0551 Y	[1]	LINES GP-TILT CYLINDER
185-1598 Y	[1]	MOUNTING GP-BANK VALVE
119-4595 Y	[1]	MOUNTING GP-BUCKET
185-5914 Y	[1]	VALVE GP-BANK 3
164-1364	[1]	BOOT
188-0861	[1]	FILM-INSTRUCTION (MULTIPURPOSE BUCKET)
186-5298	[1]	FILM-INSTRUCTION (BUCKET CONTROL)
Y		SEPARATE ILLUSTRATION

#SEBP32090382

185-0063: HYDRAULIC AR

HYDRAULIC AR

185-0063 HYDRAULIC AR -MULTIPURPOSE BUCKET-LOCKS
S/N BNS1-1117; BMT1-1617
3 BANK, PARALLEL LIFT
AN ATTACHMENT

i01441456 SEBP3209

For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
164-1364	[1]	BOOT
183-3159 Y	[1]	CONTROL GP-HYDRAULIC HAND
198-0102	[1]	FILM (MULTIPURPOSE BUCKET)(MECHANICAL BUCKET CONTROL)
186-5298	[1]	FILM-INSTRUCTION (BUCKET CONTROL)
183-8552 Y	[1]	LINES GP-LOAD CONTROL VALVE
112-6403 Y	[1]	LINES GP-LOADER AUXILIARY
185-1598 Y	[1]	MOUNTING GP-BANK VALVE
119-4595 Y	[1]	MOUNTING GP-BUCKET
211-3372	[1]	SWITCH GP
130-2758	[1]	HOUSING-SWITCH
130-2759	[1]	HOUSING-DETENT
131-0379	[1]	SWITCH AS (DETENT)
102-8803	[1]	KIT-RECEPTACLE (3-PIN)
		(KIT SERVICES RECEPTACLE AS & WEDGE)
186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
185-5914 Y	[1]	VALVE GP-BANK 3
Y		SEPARATE ILLUSTRATION

#SEBP32090383

200-6284: KIT-RIDE CONTROL

KIT-RIDE CONTROL

200-6284 KIT-RIDE CONTROL
S/N BNS1-1117; BMT1-1617
FIELD INSTALLATION, STANDARD SHIFT
AN ATTACHMENT

i01478608 SEBP3209

For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
195-1284 Y	[1]	LINES GP-RIDE CONTROL
186-0311 Y	[1]	WIRING GP-RIDE CONTROL

173-4514	[2]	FILM (RIDE CONTROL)
		(ON HOOD IN PLACE OF TURBO DECAL)
Y		SEPARATE ILLUSTRATION

#SEBP32090384

200-6285: KIT-RIDE CONTROL

KIT-RIDE CONTROL

200-6285 KIT-RIDE CONTROL
S/N BNS1-1117; BMT1-1617
FIELD INSTALLATION, AUTO SHIFT
AN ATTACHMENT

i01478618 SEBP3209

For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
195-1284 Y	[1]	LINES GP-RIDE CONTROL
186-0312 Y	[1]	WIRING GP-RIDE CONTROL

173-4514	[2]	FILM (RIDE CONTROL)
		(ON HOOD IN PLACE OF TURBO DECAL)
Y		SEPARATE ILLUSTRATION

#SEBP32090385

183-8506: LINES GP-BACKHOE

LINES GP-BACKHOE

183-8506 LINES GP-BACKHOE -STANDARD FRAME
S/N BMT1-1617
PART OF 185-1990, 185-1991, 185-1992, 185-1993, 186-2539, 186-2540, 186-2541, 186-2542 BACKHOE AR-EXTENDABLE STICK, 185-1984, 185-1985, 185-1986, 185-1987, 185-1988, 185-1989 BACKHOE AR-STANDARD STICK
AN ATTACHMENT

i01376338 SEBP3209

For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	106-5813	[4]	BLOCK
2.	106-5814	[4]	PLATE
3.	111-3798	[2]	CLAMP (RH)
4.	176-9154	[1]	BRACKET
5.	183-8488 I	[1]	HOSE AS
6.	183-8490 I	[1]	HOSE AS
7.	183-8492 I	[1]	HOSE AS
8.	183-8494 I	[1]	HOSE AS
9.	183-8500 I	[1]	HOSE AS
10.	183-8502 I	[1]	HOSE AS
11.	148-8341	[6]	CONNECTOR AS
			(EACH INCLUDES)
	3D-2824	[1]	SEAL-O-RING
	6V-8713	[1]	CONNECTOR
	7J-9108	[1]	SEAL-O-RING
12.	2P-1293	[2]	LOCKNUT (1-3/16-12-THD)
13.	6V-7744 M	[10]	LOCKNUT (M10X1.5-THD)
14.	6V-8398	[2]	SEAL-O-RING
15.	6V-9169	[2]	NUT (13/16-16-THD)
16.	6V-9170	[2]	NUT-BULKHEAD (1-14-THD)
17.	6V-9746	[2]	SEAL-O-RING
18.	7J-9108	[2]	SEAL-O-RING
19.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
20.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
21.	8T-5005 M	[10]	BOLT (M10X1.5X70-MM)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#SEBP32090386

183-8524: LINES GP-BACKHOE

LINES GP-BACKHOE

183-8524 LINES GP-BACKHOE -NARROW FRAME
S/N BNS1-1117
PART OF 186-1442, 186-1443, 186-1444, 186-1445, 186-2543, 186-2544, 186-2545, 186-2546 BACKHOE AR-EXTENDABLE STICK, 186-1436, 186-1437, 186-1438, 186-1439, 186-1440, 186-1441 BACKHOE AR-STANDARD STICK
AN ATTACHMENT

i01379049 SEBP3209

For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-7744 M	[10]	LOCKNUT (M10X1.5-THD)
2.	106-5813	[4]	BLOCK
3.	106-5814	[4]	PLATE
4.	111-3798	[2]	CLAMP (RH)
5.	176-9154	[1]	BRACKET
6.	183-8512 I	[1]	HOSE AS
7.	183-8513 I	[1]	HOSE AS
8.	183-8514 I	[1]	HOSE AS
9.	183-8515 I	[1]	HOSE AS
10.	183-8518 I	[1]	HOSE AS
11.	183-8519 I	[1]	HOSE AS
12.	148-8341	[6]	CONNECTOR AS
			(EACH INCLUDES)
	3D-2824	[1]	SEAL-O-RING
	6V-8713	[1]	CONNECTOR
	7J-9108	[1]	SEAL-O-RING
13.	2P-1293	[2]	LOCKNUT (1-3/16-12-THD)
14.	6V-8398	[2]	SEAL-O-RING
15.	6V-9169	[2]	NUT (13/16-16-THD)
16.	6V-9170	[2]	NUT-BULKHEAD (1-14-THD)
17.	6V-9746	[2]	SEAL-O-RING
18.	7J-9108	[2]	SEAL-O-RING
19.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
20.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
21.	8T-5005 M	[10]	BOLT (M10X1.5X70-MM)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#SEBP32090387

183-8507: LINES GP-BACKHOE AUXILIARY

LINES GP-BACKHOE AUXILIARY

183-8507 LINES GP-BACKHOE AUXILIARY -EXTENDABLE STICK-STANDARD FRAME
S/N BMT1-1617
PART OF 185-1990, 185-1991, 186-2541 BACKHOE AR-EXTENDABLE STICK
AN ATTACHMENT

i01379191 SEBP3209

1838507 LINES GP-BACKHOE AUXILIARY Parts scheme

For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-2857	[1]	GROMMET
2.	176-9153	[1]	BRACKET
3.	176-9155	[2]	CLAMP (LH)
4.	183-8486 I	[1]	HOSE AS
5.	183-8504 I	[1]	HOSE AS
6.	148-8341	[2]	CONNECTOR AS
			(EACH INCLUDES)
	3D-2824	[1]	SEAL-O-RING
	6V-8713	[1]	CONNECTOR
	7J-9108	[1]	SEAL-O-RING
7.	6V-8398	[2]	SEAL-O-RING
8.	6V-9169	[2]	NUT (13/16-16-THD)
9.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
10.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#SEBP32090388

183-8508: LINES GP-BACKHOE AUXILIARY

LINES GP-BACKHOE AUXILIARY

183-8508 LINES GP-BACKHOE AUXILIARY -EXTENDABLE STICK-STANDARD FRAME
S/N BMT1-1617
PART OF 185-1990, 185-1991, 185-1992, 185-1993, 186-2539, 186-2540, 186-2541, 186-2542 BACKHOE AR-EXTENDABLE STICK
AN ATTACHMENT

i01376991 SEBP3209

1838508 LINES GP-BACKHOE AUXILIARY Parts scheme

For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	176-0145	[2]	CLAMP
2.	176-9152	[1]	BRACKET
3.	183-8484 I	[1]	HOSE AS
4.	183-8486 I	[1]	HOSE AS
5.	148-8341	[2]	CONNECTOR AS
			(EACH INCLUDES)
	3D-2824	[1]	SEAL-O-RING
	6V-8713	[1]	CONNECTOR
	7J-9108	[1]	SEAL-O-RING
6.	2P-1293	[1]	LOCKNUT (1-3/16-12-THD)
7.	6V-8398	[1]	SEAL-O-RING
8.	6V-9169	[1]	NUT (13/16-16-THD)
9.	6V-9746	[1]	SEAL-O-RING
10.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
11.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#SEBP32090389

183-8509: LINES GP-BACKHOE AUXILIARY

LINES GP-BACKHOE AUXILIARY

183-8509 LINES GP-BACKHOE AUXILIARY -STANDARD STICK
S/N BMT1-1617
PART OF 185-1986, 185-1987 BACKHOE AR-STANDARD STICK
AN ATTACHMENT

i01379273 SEBP3209

1838509 LINES GP-BACKHOE AUXILIARY Parts scheme

For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	176-0145	[2]	CLAMP
2.	176-9152	[1]	BRACKET
3.	183-8484 I	[1]	HOSE AS
4.	148-8341	[1]	CONNECTOR AS
	3D-2824	[1]	SEAL-O-RING
	6V-8713	[1]	CONNECTOR
	7J-9108	[1]	SEAL-O-RING
5.		[1]	PLUG AS
	3D-2824	[1]	SEAL-O-RING
	9S-4183	[1]	PLUG (1-1/16-12-THD)
6.	2P-1293	[1]	LOCKNUT (1-3/16-12-THD)
7.	6V-9746	[1]	SEAL-O-RING
8.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
9.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART