POWER TRAIN
AXLE GPBRAKING SYSTEM
BRAKE GPPOWER TRAIN
CONTROL GP-DIFFERENTIAL LOCKDRIVE GP
FILLER GP-POWER TRAIN OIL
POWER TRAIN
AXLE GP
#SEBP32110200
119-8191: AXLE & MTG GP-DRIVE & STEERING
119-8191 AXLE & MTG GP-DRIVE & STEERING -REAR
S/N BPN1-475
PART OF 184-7955 DRIVE AR-BACKHOE LOADER
S/N BPN1-475
PART OF 184-7955 DRIVE AR-BACKHOE LOADER
For full view, you need register
Parts for your 438D BACKHOE LOADER:
CATERPILLAR SIS#SEBP32110201
114-0165: AXLE & MTG GP-REAR
For full view, you need register
Parts for your 438D BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5F-5434 | [1] | VALVE AS-VENT (FINAL DRIVE, AXLE) | |
| 2. | 156-2857 CY | [1] | AXLE GP-REAR | |
| 3. | 7X-2570 M | [8] | BOLT (M20X2.5X220-MM) | |
| 4. | 8T-4131 M | [8] | NUT (M20X2.5-THD) | |
| 5. | 8T-5439 | [16] | WASHER-HARD (21.5X45X6-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32110202
119-8190: AXLE GP-DRIVE & STEERING
119-8190 AXLE GP-DRIVE & STEERING -REAR
S/N BPN1-475
RATIO 20.94
PART OF 119-8191 AXLE & MTG GP-DRIVE & STEERING
S/N BPN1-475
RATIO 20.94
PART OF 119-8191 AXLE & MTG GP-DRIVE & STEERING
For full view, you need register
Parts for your 438D BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 110-2462 | [10] | SPRING | |
| 2. | 8U-3591 | [10] | SPACER (6.5X15X7-MM THK) | |
| 3. | 7X-2619 M | [10] | BOLT (M6X1X10-MM) | |
| 4. | 110-0878 | [10] | PIN | |
| 5. | 110-4748 | [16] | NUT | |
| 6. | 009-3819 | [1] | CONE-BEARING | |
| 7. | 110-0880 | [2] | CARRIER-DISC | |
| 8. | 110-4752 B | [4] | SHIM | |
| 9. | 110-0876 | [6] | SCREW | |
| 10. | 1G-6735 | [8] | PIN-GROOVED | |
| 11. | 110-0877 | [6] | PIN | |
| 12. | 110-4736 | [6] | RING | |
| 13. | 110-0870 | [10] | PLATE | |
| 14. | 110-0842 | [8] | DISC-FRICTION | |
| 15. | 110-4757 | [2] | RING | |
| 16. | 110-4755 | [2] | RING | |
| 17. | 110-4756 | [2] | RING | |
| 18. | 110-4758 | [2] | RING | |
| 19. | 2D-9191 | [1] | CONE-BEARING | |
| 20. | 110-0158 B | [1] | RING (16-MM THK) | |
| 110-0137 B | [1] | RING (17.4-MM THK) | ||
| 110-0138 B | [1] | RING (17.3-MM THK) | ||
| 110-0139 B | [1] | RING (17.2-MM THK) | ||
| 110-0140 B | [1] | RING (17.1-MM THK) | ||
| 110-0146 B | [1] | RING (16.92-MM THK) | ||
| 110-0150 B | [1] | RING (16.8-MM THK) | ||
| 110-0151 B | [1] | RING (16.7-MM THK) | ||
| 110-0152 B | [1] | RING (16.6-MM THK) | ||
| 110-0153 B | [1] | RING (16.5-MM THK) | ||
| 110-0154 B | [1] | RING (16.4-MM THK) | ||
| 110-0155 B | [1] | RING (16.3-MM THK) | ||
| 110-0156 B | [1] | RING (16.2-MM THK) | ||
| 110-0157 B | [1] | RING (16.1-MM THK) | ||
| 110-0142 B | [1] | RING (17.04-MM THK) | ||
| 110-0144 B | [1] | RING (16.98-MM THK) | ||
| 110-0148 B | [1] | RING (16.86-MM THK) | ||
| 193-1454 B | [1] | RING (16.66-MM THK) | ||
| 193-1455 B | [1] | RING (16.96-MM THK) | ||
| 193-1458 B | [1] | RING (17-MM THK) | ||
| 193-1460 B | [1] | RING (17.02-MM THK) | ||
| 193-1461 B | [1] | RING (17.06-MM THK) | ||
| 193-1462 B | [1] | RING (17.08-MM THK) | ||
| 193-1463 B | [1] | RING (17.12-MM THK) | ||
| 193-1464 B | [1] | RING (17.14-MM THK) | ||
| 193-1465 B | [1] | RING (17.16-MM THK) | ||
| 193-1466 B | [1] | RING (17.18-MM THK) | ||
| 193-1467 B | [1] | RING (17.22-MM THK) | ||
| 193-1469 B | [1] | RING (17.24-MM THK) | ||
| 193-1470 B | [1] | RING (17.26-MM THK) | ||
| 193-1471 B | [1] | RING (17.28-MM THK) | ||
| 225-5014 B | [1] | RING (16.56-MM THK) | ||
| 225-5015 B | [1] | RING (16.62-MM THK) | ||
| 225-5016 B | [1] | RING (16.64-MM THK) | ||
| 225-5017 B | [1] | RING (16.68-MM THK) | ||
| 225-5018 B | [1] | RING (16.72-MM THK) | ||
| 225-5024 B | [1] | RING (16.84-MM THK) | ||
| 225-5025 B | [1] | RING (16.88-MM THK) | ||
| 225-5026 B | [1] | RING (16.9-MM THK) | ||
| 225-5027 B | [1] | RING (16.94-MM THK) | ||
| 225-5019 B | [1] | RING (16.74-MM THK) | ||
| 225-5020 B | [1] | RING (16.76-MM THK) | ||
| 225-5021 B | [1] | RING (16.76-MM THK) | ||
| 225-5022 B | [1] | RING (16.78-MM THK) | ||
| 225-5023 B | [1] | RING (16.82-MM THK) | ||
| 21. | 110-0159 B | [2] | WASHER-THRUST (3-MM THK) | |
| 110-0160 B | [2] | WASHER-THRUST (2.7-MM THK) | ||
| 110-0161 B | [2] | WASHER-THRUST (2.5-MM THK) | ||
| 110-0162 B | [2] | WASHER-THRUST (2.2-MM THK) | ||
| 110-0163 B | [2] | WASHER-THRUST (2-MM THK) | ||
| 110-0164 B | [2] | WASHER-THRUST (1.7-MM THK) | ||
| 110-0165 B | [2] | WASHER-THRUST (1.5-MM THK) | ||
| 22. | 5W-5547 B | [1] | DISC (1-MM THK) | |
| 5W-5548 B | [1] | DISC (1.1-MM THK) | ||
| 5W-5549 B | [1] | DISC (1.2-MM THK) | ||
| 5W-5550 B | [1] | DISC (1.3-MM THK) | ||
| 5W-5551 B | [1] | DISC (1.4-MM THK) | ||
| 5W-5552 B | [1] | DISC (1.5-MM THK) | ||
| 5W-5553 B | [1] | DISC (1.6-MM THK) | ||
| 5W-5554 B | [1] | DISC (1.7-MM THK) | ||
| 5W-5555 B | [1] | DISC (1.05-MM THK) | ||
| 5W-5556 B | [1] | DISC (1.15-MM THK) | ||
| 5W-5557 B | [1] | DISC (1.25-M THK) | ||
| 5W-5558 B | [1] | DISC (1.35-MM THK) | ||
| 5W-5559 B | [1] | DISC (1.45-MM THK) | ||
| 5W-5560 B | [1] | DISC (1.55-MM THK) | ||
| 5W-5561 B | [1] | DISC (1.65-MM THK) | ||
| 5W-5562 B | [1] | DISC (1.75-MM THK) | ||
| 5W-6400 B | [1] | DISC (1.8-MM THK) | ||
| 8U-2752 B | [1] | DISC (0.7-MM THK) | ||
| 8U-2753 B | [1] | DISC (0.8-MM THK) | ||
| 8U-2754 B | [1] | DISC (0.9-MM THK) | ||
| 23. | 110-2461 M | [8] | BOLT (M16X1.5X100-MM) | |
| 24. | 110-2457 | [4] | PIN-SPRING | |
| 25. | 110-2458 | [4] | PIN-SPRING | |
| 26. | 110-2467 | [1] | SHAFT-DIFFERENTIAL | |
| 27. | 213-9783 | [6] | BEARING-ROLLER | |
| 28. | 248-1017 | [4] | WASHER-THRUST | |
| 29. | 110-0855 | [2] | GEAR-AXLE BEVEL | |
| 30. | 110-0852 | [2] | DISC-PRESSURE | |
| 31. | 110-0854 | [8] | DISC-FRICTION | |
| 32. | 110-0853 | [10] | PLATE | |
| 33. | 253-9741 | [1] | CASE-DIFFERENTIAL | |
| 34. | 190-8591 | [12] | WASHER (64.5X72.1X2-MM THK) | |
| 35. | 213-9759 | [4] | GEAR-BEVEL | |
| 36. | 193-1132 | [6] | GEAR-PLANETARY | |
| 37. | 190-8590 | [12] | RING-SNAP | |
| 38. | 110-0867 | [1] | HOUSING-AXLE DRIVE | |
| 39. | 110-0883 | [2] | HOUSING-BRAKE | |
| 40. | 190-8567 B | [1] | SHIM (1-MM THK) | |
| 190-8561 B | [1] | SHIM (0.6-MM THK) | ||
| 110-0124 B | [1] | SHIM (2-MM THK) | ||
| 110-0122 B | [1] | SHIM (1.8-MM THK) | ||
| 110-0121 B | [1] | SHIM (1.5-MM THK) | ||
| 110-0120 B | [1] | SHIM (1.2-MM THK) | ||
| 190-8566 B | [1] | SHIM (0.9-MM THK) | ||
| 190-8565 B | [1] | SHIM (0.8-MM THK) | ||
| 190-8563 B | [1] | SHIM (0.7-MM THK) | ||
| 5W-2073 B | [1] | SHIM (0.3-MM THK) | ||
| 5W-2074 B | [1] | SHIM (0.5-MM THK) | ||
| 5W-3644 B | [1] | SHIM (0.2-MM THK) | ||
| 5W-2072 B | [1] | SHIM (0.1-MM THK) | ||
| 193-1123 B | [1] | SHIM (0.75-MM THK) | ||
| 193-1124 B | [1] | SHIM (0.65-MM THK) | ||
| 193-1125 B | [1] | SHIM (0.1-MM THK)(0.1MM THK) | ||
| 193-1127 B | [1] | SHIM (0.15-MM THK) | ||
| 193-1128 B | [1] | WASHER (0.1-MM THK) | ||
| 193-1129 B | [1] | WASHER (0.15-MM THK) | ||
| 193-1130 B | [1] | WASHER (0.5-MM THK) | ||
| 41. | 3N-4969 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 42. | 110-4746 | [1] | SEAL | |
| 43. | 110-0856 | [1] | CAP-PROTECTION | |
| 44. | 113-5988 | [1] | FLANGE | |
| 45. | 110-4791 | [1] | HOUSING-AXLE | |
| 46. | 110-4749 | [2] | PLUG | |
| 47. | 110-2463 | [1] | BEARING-ROLLER | |
| 48. | 110-0180 B | [2] | WASHER (90X99.8X0.3-MM THK) | |
| 6T-8671 B | [2] | SHIM (0.8-MM THK) | ||
| 6T-8672 B | [2] | SHIM (0.7-MM THK) | ||
| 6T-8673 B | [2] | SHIM (0.6-MM THK) | ||
| 6T-8674 B | [2] | SHIM (0.5-MM THK) | ||
| 6T-8675 B | [2] | SHIM (0.4-MM THK) | ||
| 110-0167 B | [2] | WASHER (90X99.8X0.85-MM THK) | ||
| 110-0168 B | [2] | WASHER (90X99.8X0.75-MM THK) | ||
| 110-0169 B | [2] | WASHER (90X99.8X0.65-MM THK) | ||
| 110-0170 B | [2] | WASHER (0.55-MM THK) | ||
| 110-0177 B | [2] | WASHER (90X99.8X0.45-MM THK) | ||
| 110-0178 B | [2] | WASHER (90X99.8X0.35-MM THK) | ||
| 110-0181 B | [2] | RING (2-MM THK) | ||
| 110-0182 B | [2] | RING (1.95-MM THK) | ||
| 110-0183 B | [2] | RING (1.9-MM THK) | ||
| 110-0184 B | [2] | RING (1.85-MM THK) | ||
| 098-2961 B | [2] | SHIM (1.7-MM THK) | ||
| 098-2962 B | [2] | SHIM (1.8-MM THK) | ||
| 098-2959 B | [2] | SHIM (1.5-MM THK) | ||
| 098-2960 B | [2] | SHIM (1.6-MM THK) | ||
| 098-2957 B | [2] | SHIM (1.3-MM THK) | ||
| 098-2958 B | [2] | SHIM (1.4-MM THK) | ||
| 6T-8668 B | [2] | SHIM (1.2-MM THK) | ||
| 6T-8669 B | [2] | SHIM (1.1-MM THK) | ||
| 6T-8670 B | [2] | SHIM (1-MM THK) | ||
| 110-0191 B | [2] | RING (1.25-MM THK) | ||
| 110-0192 B | [2] | RING (1.15-MM THK) | ||
| 110-0193 B | [2] | RING (1.05-MM THK) | ||
| 110-0194 B | [2] | RING (0.95-MM THK) | ||
| 110-0195 B | [2] | RING (0.9-MM THK) | ||
| 49. | 110-0875 | [2] | PISTON | |
| 50. | 110-4753 | [2] | BEARING | |
| 51. | 008-1902 | [2] | CONE-BEARING | |
| 52. | 110-4790 | [1] | HOUSING-AXLE | |
| 53. | 110-4792 | [1] | HOUSING-BRAKE (LH) | |
| 110-4793 | [1] | HOUSING-BRAKE (RH) | ||
| 54. | 3N-6408 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 55. | 110-0134 B | [1] | SHIM (0.4-MM THK) | |
| 110-0131 B | [1] | SHIM (1-MM THK) | ||
| 110-0132 B | [1] | SHIM (0.8-MM THK) | ||
| 110-0133 B | [1] | SHIM (0.6-MM THK) | ||
| B | [1] | SHIM (0.3-MM THK) | ||
| 110-0136 B | [1] | SHIM (0.2-MM THK) | ||
| 110-0126 B | [1] | SHIM (2-MM THK) | ||
| 110-0127 B | [1] | SHIM (1.8-MM THK) | ||
| 110-0128 B | [1] | SHIM (1.6-MM THK) | ||
| 56. | 110-0859 | [2] | PIN-BEARING | |
| 57. | 096-9988 M | [8] | BOLT (M14X2X30-MM) | |
| 58. | 9R-6947 | [2] | SEAL-O-RING | |
| 59. | 9R-6952 | [2] | CAP-SEALING | |
| 60. | 110-0884 | [2] | HUB | |
| 61. | 110-0874 | [20] | BOLT-WHEEL | |
| 62. | 110-4745 | [2] | SEAL-O-RING | |
| 63. | 110-2464 | [4] | BEARING-ROLLER | |
| 64. | 110-0866 | [2] | CARRIER-PLANETARY | |
| 65. | 110-0862 | [2] | GEAR-RING | |
| 66. | 098-2996 | [4] | SEAL-O-RING | |
| 67. | 6S-3051 | [2] | CUP-BEARING | |
| 68. | 110-4737 | [6] | RING-RETAINING | |
| 69. | 4D-8648 | [2] | CUP-BEARING | |
| 70. | 110-0865 | [2] | SHAFT-SUN GEAR | |
| 71. | 009-3818 | [1] | CUP-BEARING | |
| 72. | 110-0846 | [2] | RING-RETAINING | |
| 73. | 2D-9190 | [1] | CUP-BEARING | |
| 74. | 110-0863 | [2] | WASHER-THRUST | |
| 75. | 110-0844 | [2] | WASHER-THRUST | |
| 76. | 110-0849 | [2] | NUT-SLOTTED | |
| 77. | 110-0861 | [2] | WASHER-TAB | |
| 78. | 9R-6965 M | [4] | SCREW (M10X1.5X20-MM) | |
| 79. | 110-0851 | [2] | SEAL | |
| 80. | 110-0850 | [4] | SEAL | |
| 81. | 110-0839 | [2] | BUSHING | |
| 82. | 110-0864 | [2] | RING-RETAINING | |
| 83. | 110-2460 M | [4] | BOLT (M12X1.5X95-MM) | |
| 84. | 8T-6385 M | [32] | BOLT (M16X2X180-MM) | |
| 85. | 110-2455 M | [4] | BOLT (M12X1.5X20-MM) | |
| 86. | 110-4733 | [2] | UNIVERSAL JOINT | |
| 87. | 8T-4779 M | [8] | BOLT (M16X2X35-MM) | |
| 88. | 110-0860 | [2] | PIN-BEARING | |
| 89. | 130-2703 | [1] | GEAR SET | |
| 90. | 110-0843 | [1] | WASHER (31X56X6-MM THK) | |
| 91. | 110-0848 M | [1] | NUT (M30X1.5-THD) | |
| 92. | 110-2456 | [4] | PIN-SPRING | |
| 93. | 110-0840 | [2] | TIE ROD | |
| 94. | 110-0871 | [1] | GUIDE | |
| 95. | 110-0847 | [1] | PLUG-SCREW | |
| 96. | 9R-6953 | [6] | SEAL-O-RING | |
| 97. | 109-4440 | [5] | PLUG | |
| 98. | 110-0841 | [1] | ROD-PISTON | |
| 99. | 110-4754 | [1] | GASKET | |
| 100. | 110-4759 | [2] | GUIDE-PISTON | |
| 101. | 110-0873 | [1] | CYLINDER | |
| 102. | 110-4742 | [2] | SEAL-O-RING | |
| 103. | 110-4739 | [12] | RING-SNAP | |
| 104. | 110-4735 | [4] | RING-GUIDE | |
| 105. | 5W-6392 | [2] | SEAL-O-RING | |
| 106. | 5W-6391 | [2] | SCRAPER | |
| 107. | 110-0872 | [1] | GUIDE | |
| 108. | 110-2459 M | [8] | BOLT (M14X2X105-MM) | |
| 109. | 6V-2652 | [2] | CONE-BEARING | |
| 110. | 110-0858 | [2] | CAP-SEALING | |
| 111. | 110-4743 | [2] | SEAL-O-RING | |
| 112. | 9R-3171 | [4] | FITTING | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP32110203
154-5472: AXLE GP-DRIVE & STEERING
154-5472 AXLE GP-DRIVE & STEERING -FRONT
S/N BPE1-663; BPN1-475
PART OF 186-3462 AXLE GP-DRIVE & STEERING
S/N BPE1-663; BPN1-475
PART OF 186-3462 AXLE GP-DRIVE & STEERING
For full view, you need register
Parts for your 438D BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 174-5698 | [1] | HOUSING (RH) | |
| 2. | 119-7056 | [1] | HOUSING (LH) | |
| 3. | 9R-3175 | [1] | PLUG | |
| 5. | 130-7008 B | [2] | SHIM (0.2-MM THK) | |
| 130-7009 B | [2] | SHIM (0.3-MM THK) | ||
| 130-7010 B | [2] | SHIM (0.4-MM THK) | ||
| 130-7011 B | [2] | SHIM (0.6-MM THK) | ||
| 130-7012 B | [2] | SHIM (0.8-MM THK) | ||
| 130-7013 B | [2] | SHIM (1-MM THK) | ||
| 130-7015 B | [2] | SHIM (1.6-MM THK) | ||
| 130-7017 B | [2] | SHIM (2-MM THK) | ||
| 6. | 9X-0796 | [3] | SEAL-O-RING | |
| 7. | 130-2998 | [2] | BUSHING | |
| 8. | 130-6877 | [2] | SEAL | |
| 9. | 154-5404 | [2] | BEARING | |
| 10. | 9R-3168 M | [4] | SCREW (M10X1.5X20-MM) | |
| 11. | 119-7061 | [2] | PLUG | |
| 12. | 130-6878 | [6] | RING | |
| 13. | 169-4161 | [6] | CONE-BEARING | |
| 14. | 169-4162 | [6] | CONE-BEARING | |
| 15. | 169-4160 | [6] | GEAR | |
| 16. | 130-7027 | [2] | CARRIER | |
| 17. | 119-7042 | [2] | SHAFT | |
| 18. | 119-7040 | [2] | GEAR-RING | |
| 19. | 130-3007 | [2] | NUT | |
| 20. | 119-7060 M | [2] | SCREW-STOP (M14X1.5X50-MM) | |
| 21. | 130-7047 | [16] | STUD | |
| 22. | 130-3008 M | [16] | BOLT (M10X1.5X45-MM) | |
| 23. | 2S-0480 | [4] | CUP-TAPERED ROLLER | |
| 24. | 178-8608 | [4] | CONE-TAPERED | |
| 25. | 130-6879 | [2] | SEAL | |
| 26. | 9X-0640 | [2] | SEAL-O-RING | |
| 27. | 130-3014 Y | [1] | SHAFT GP-DRIVE (LH) | |
| 28. | 130-3013 Y | [1] | SHAFT GP-DRIVE (RH) | |
| 29. | 054-6589 | [2] | CLIP | |
| 30. | 119-7045 | [2] | SEAL | |
| 31. | 7X-5771 | [2] | RING-RETAINING | |
| 32. | 131-3816 | [2] | RING | |
| 33. | 119-7053 | [2] | FLANGE | |
| 34. | 5P-9439 | [2] | BALL BEARING | |
| 35. | 130-6677 | [16] | BOLT (M12X1.75X30-MM) | |
| 36. | 130-7026 | [2] | PIN | |
| 37. | 119-7038 | [2] | PIN | |
| 38. | 119-7047 | [2] | SEAL | |
| 39. | 119-7046 | [2] | SEAL | |
| 40. | 031-0426 | [2] | CUP-BEARING | |
| 41. | 077-3918 | [2] | BEARING | |
| 42. | 119-7057 | [1] | HOUSING (RH) | |
| 43. | 130-7031 | [1] | HOUSING (LH) | |
| 44. | 054-6459 B | [1] | SHIM (1-MM THK) | |
| 054-6460 B | [1] | SHIM (1.05-MM THK) | ||
| 054-6461 B | [1] | SHIM (1.1-MM THK) | ||
| 054-6462 B | [1] | SHIM (1.15-MM THK) | ||
| 054-6463 B | [1] | SHIM (1.2-MM THK) | ||
| 054-6464 B | [1] | SHIM (1.25-MM THK) | ||
| 054-6465 B | [1] | SHIM (1.3-MM THK) | ||
| 054-6466 B | [1] | SHIM (1.35-MM THK) | ||
| 054-6467 B | [1] | SHIM (1.4-MM THK) | ||
| 054-6468 B | [1] | SHIM (1.45-MM THK) | ||
| 054-6469 B | [1] | SHIM (1.5-MM THK) | ||
| 054-6470 B | [1] | SHIM (1.55-MM THK) | ||
| 054-6471 B | [1] | SHIM (1.6-MM THK) | ||
| 054-6472 B | [1] | SHIM (0.95-MM THK) | ||
| 054-6473 B | [1] | SHIM (0.9-MM THK) | ||
| 054-6474 B | [1] | SHIM (0.65-MM THK) | ||
| 054-6475 B | [1] | SHIM (0.7-MM THK) | ||
| 054-6476 B | [1] | SHIM (0.75-MM THK) | ||
| 054-6477 B | [1] | SHIM (0.85-MM THK) | ||
| 130-3850 B | [1] | SHIM (0.8-MM THK) | ||
| 45. | 130-6689 B | [1] | RING (15.1-MM THK) | |
| 130-6690 B | [1] | RING (15.2-MM THK) | ||
| 130-6691 B | [1] | RING (15.26-MM THK) | ||
| 130-6693 B | [1] | RING (15.3-MM THK) | ||
| 130-6694 B | [1] | RING (15.33-MM THK) | ||
| 130-6695 B | [1] | RING (15.36-MM THK) | ||
| 130-6696 B | [1] | RING (15.38-MM THK) | ||
| 130-6697 B | [1] | RING (15.4-MM THK) | ||
| 130-6698 B | [1] | RING (15.43-MM THK) | ||
| 130-6699 B | [1] | RING (15.46-MM THK) | ||
| 130-6701 B | [1] | RING (15.48-MM THK) | ||
| 130-6702 B | [1] | RING (15.5-MM THK) | ||
| 130-6703 B | [1] | RING (15.53-MM THK) | ||
| 130-6704 B | [1] | RING (15.56-MM THK) | ||
| 130-6705 B | [1] | RING (15.58-MM THK) | ||
| 130-6706 B | [1] | RING (15.6-MM THK) | ||
| 130-6707 B | [1] | RING (15.63-MM THK) | ||
| 130-6708 B | [1] | RING (15.66-MM THK) | ||
| 130-6709 B | [1] | RING (15.68-MM THK) | ||
| 130-6710 B | [1] | RING (15.7-MM THK) | ||
| 130-6711 B | [1] | RING (15.73-MM THK) | ||
| 46. | 130-6712 B | [1] | RING (15.8-MM THK) | |
| 130-6713 B | [1] | RING (15.83-MM THK) | ||
| 130-6714 B | [1] | RING (15.86-MM THK) | ||
| 130-6715 B | [1] | RING (15.9-MM THK) | ||
| 130-6716 B | [1] | RING (15.93-MM THK) | ||
| 130-6718 B | [1] | RING (15.96-MM THK) | ||
| 130-6719 B | [1] | RING (16-MM THK) | ||
| 130-6720 B | [1] | RING (16.03-MM THK) | ||
| 130-6721 B | [1] | RING (16.06-MM THK) | ||
| 130-6722 B | [1] | RING (16.1-MM THK) | ||
| 130-6724 B | [1] | RING (16.13-MM THK) | ||
| 130-6725 B | [1] | RING (16.16-MM THK) | ||
| 130-6726 B | [1] | RING (16.2-MM THK) | ||
| 130-6727 B | [1] | RING (16.23-MM) | ||
| 130-6728 B | [1] | RING (16.26-MM THK) | ||
| 130-6729 B | [1] | RING (16.3-MM THK) | ||
| 130-6731 B | [1] | RING (16.4-MM THK) | ||
| 130-6732 B | [1] | RING (16.76-MM THK) | ||
| 47. | 130-6798 B | [2] | SHIM (1-MM THK) | |
| 130-6799 B | [2] | WASHER (1.05-MM THK) | ||
| 130-6800 B | [2] | SHIM (1.1-MM THK) | ||
| 130-6801 B | [2] | WASHER (62.2X75X1.15-MM THK) | ||
| 130-6802 B | [2] | WASHER (62.2X75X1.2-MM THK) | ||
| 130-6803 B | [2] | WASHER (62.2X75X1.25-MM THK) | ||
| 130-6804 B | [2] | SHIM (1.3-MM THK) | ||
| 130-6805 B | [2] | SHIM (1.35-MM THK) | ||
| 130-6806 B | [2] | SHIM (1.4-MM THK) | ||
| 130-6807 B | [2] | WASHER (1.45-MM THK) | ||
| 130-6808 B | [2] | SHIM (1.5-MM THK) | ||
| 130-6809 B | [2] | SHIM (1.55-MM THK) | ||
| 130-6810 B | [2] | SHIM (1.6-MM THK) | ||
| 130-6811 B | [2] | SHIM (1.65-MM THK) | ||
| 130-6812 B | [2] | SHIM (1.7-MM THK) | ||
| 130-6813 B | [2] | SHIM (1.75-MM THK) | ||
| 130-6814 B | [2] | SHIM (1.8-MM THK) | ||
| 130-6815 B | [2] | SHIM (1.85-MM THK) | ||
| 130-6816 B | [2] | SHIM (1.9-MM THK) | ||
| 130-6817 B | [2] | WASHER (62.2X75X1.95-MM THK) | ||
| 130-6818 B | [2] | WASHER (62.2X75X2-MM THK) | ||
| 130-6819 B | [2] | WASHER (62.2X75X2.05-MM THK) | ||
| 130-6820 B | [2] | SHIM (2.1-MM THK) | ||
| 48. | 130-6673 | [1] | PLUG | |
| 49. | 3N-6408 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 50. | 6V-3303 M | [15] | BOLT (M16X2X60-MM) | |
| 51. | 178-7190 Y | [1] | CYLINDER GP-STEERING | |
| 52. | 6V-2200 | [2] | CUP-BEARING | |
| 53. | 003-7501 | [2] | CONE-BEARING | |
| 54. | 130-6675 | [1] | PIN | |
| 55. | 082-3077 | [4] | PIN | |
| 56. | 130-3010 | [4] | PIN (13.5MM DIA) | |
| 57. | 105-3484 M | [12] | BOLT-SOCKET HEAD (M10X1.5X25-MM) | |
| 58. | 119-7036 | [1] | PIN | |
| 59. | 9R-6994 | [2] | WASHER-THRUST | |
| 60. | 128-7855 | [2] | GEAR-PINION | |
| 61. | 107-5608 | [1] | GEAR SET-BEVEL | |
| 62. | 130-3000 M | [2] | WASHER (53.2X71.9X1.9-MM THK) | |
| 63. | 130-7048 B | [2] | RING (13.5-MM THK) | |
| 130-7049 B | [2] | RING (13.6-MM THK) | ||
| 130-7050 B | [2] | RING (13.7-MM THK) | ||
| 64. | 130-7024 | [1] | CASE | |
| 65. | 130-3005 M | [1] | NUT (M24X2-THD) | |
| 66. | 054-6480 | [1] | DISC | |
| 67. | 130-7028 | [1] | PLATE | |
| 68. | 130-7046 | [1] | FLANGE | |
| 69. | 055-1986 | [1] | SEAL-LIP TYPE | |
| 70. | 6S-3051 | [3] | CUP-BEARING | |
| 71. | 008-1902 | [3] | CONE-BEARING | |
| 72. | 119-7035 | [2] | GEAR | |
| 73. | 130-3809 | [1] | TIE ROD AS (RH) | |
| 130-5010 M | [1] | LOCKNUT (M22X1.5-THD) | ||
| 130-6674 | [1] | CLAMP | ||
| 130-6880 | [1] | BALL JOINT | ||
| 130-7043 | [1] | JOINT | ||
| 74. | 130-3012 | [1] | TIE ROD AS (LH) | |
| 130-5010 M | [1] | LOCKNUT (M22X1.5-THD) | ||
| 130-6674 | [1] | CLAMP | ||
| 130-6881 | [1] | BALL JOINT | ||
| 130-7043 | [1] | JOINT | ||
| 75. | 3N-4969 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 76. | 154-5405 | [2] | SEAL-LIP TYPE | |
| 77. | 054-6847 | [1] | SEAL-O-RING | |
| 78. | 054-6526 | [15] | DISC | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32110204
186-3462: AXLE GP-DRIVE & STEERING
186-3462 AXLE GP-DRIVE & STEERING
S/N BPE1-663; BPN1-475
PART OF 184-7950, 184-7955 DRIVE AR-BACKHOE LOADER
S/N BPE1-663; BPN1-475
PART OF 184-7950, 184-7955 DRIVE AR-BACKHOE LOADER
For full view, you need register
Parts for your 438D BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1K-7082 B | [1] | WASHER (2.266X4X0.031-IN THK) | |
| 2. | 9R-9702 B | [2] | WASHER (56X100X1.6-MM THK) | |
| 3. | 112-9629 | [1] | PIN | |
| 4. | 154-5472 Y | [1] | AXLE GP-DRIVE & STEERING (FRONT) | |
| 5. | 165-8996 | [2] | WASHER-THRUST (55.5X100.5X5-MM THK) | |
| 6. | 8T-5041 M | [1] | BOLT (M12X1.75X120-MM) | |
| 7. | 8T-8549 M | [1] | LOCKNUT (M12X1.75-THD) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32110205
156-2857: AXLE GP-REAR
For full view, you need register
Parts for your 438D BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 118-5837 | [2] | SHAFT AS | |
| (EACH INCLUDES) | ||||
| 1A. | 9R-5219 | [8] | BOLT-SPECIAL | |
| 2. | 9R-2407 | [1] | RETAINER AS | |
| 2A. | 3N-6408 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 2B. | 4K-5843 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 3. | 156-1928 | [1] | HOUSING AS (LH) | |
| 3A. | 6Y-7652 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 3B. | 8S-9151 | [1] | CUP-BEARING | |
| 3C. | [2] | STUD | ||
| 3D. | 156-1930 | [1] | GEAR-RING (56-TEETH) | |
| 4. | [1] | HOUSING AS | ||
| 4A. | 6Y-7652 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 4B. | 8S-9151 | [1] | CUP-BEARING | |
| 4C. | [2] | STUD | ||
| 4D. | 156-1930 | [1] | GEAR-RING (56-TEETH) | |
| 5. | 186-4117 | [2] | CARRIER AS | |
| (EACH INCLUDES) | ||||
| 5A. | 7T-6652 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 5B. | 9R-2417 | [3] | WASHER (33.07X48.38X1.06-MM THK) | |
| 5C. | 9R-2418 | [6] | WASHER (32.94X57.21X0.78-MM THK) | |
| 5D. | 9R-2419 | [3] | KIT-BEARING | |
| 5E. | 9R-2420 | [1] | RETAINER | |
| 5F. | 9R-2421 | [3] | SHAFT | |
| 5G. | 186-4118 | [3] | GEAR-PLANETARY (20-TEETH) | |
| 6. | 9F-2167 | [2] | SCREW-PURGE (3/8-24X1.164-IN) | |
| 7. | 9R-0883 | [1] | PIN | |
| 8. | 9R-0823 | [1] | LEVER AS | |
| 9. | 9R-2427 B | [1] | SHIM (0.965-MM THK) | |
| 9R-2428 B | [1] | SHIM (1.118-MM THK) | ||
| 9R-2429 B | [1] | SHIM (1.27-MM THK) | ||
| 9R-2430 B | [1] | SHIM (1.422-MM THK) | ||
| 9R-2431 B | [1] | SHIM (1.575-MM THK) | ||
| 9R-2432 B | [1] | SHIM (1.727-MM THK) | ||
| 9R-2433 B | [1] | SHIM (1.88-MM THK) | ||
| 9R-2434 B | [1] | SHIM (2.032-MM THK) | ||
| 10. | 9R-2425 | [2] | WASHER (23.088X69.6X9.52-MM THK) | |
| 11. | 156-2572 | [1] | HOUSING-REAR BRAKE (RH) | |
| 12. | 9R-9410 | [2] | SEAL-REAR BRAKE | |
| 13. | 9R-9409 | [2] | SEAL-REAR BRAKE | |
| 14. | 9R-9408 | [2] | PISTON-REAR BRAKE | |
| 15. | 9R-2446 B | [1] | SPACER (45.86X50.98X31.858-MM THK) | |
| 9R-2447 B | [1] | SPACER (45.86X50.98X31.908-MM THK) | ||
| 9R-2448 B | [1] | SPACER (45.86X50.98X31.959-MM THK) | ||
| 9R-2449 B | [1] | SPACER (45.86X50.98X32.01-MM THK) | ||
| 9R-2450 B | [1] | SPACER (45.86X50.98X32.061-MM THK) | ||
| 9R-2451 B | [1] | SPACER (45.86X50.98X32.112-MM THK) | ||
| 9R-2452 B | [1] | SPACER (45.86X50.98X32.162-MM THK) | ||
| 9R-2453 B | [1] | SPACER (45.86X50.98X32.213-MM THK) | ||
| 9R-2454 B | [1] | SPACER (45.86X50.98X32.264-MM THK) | ||
| 9R-2455 B | [1] | SPACER (45.86X50.98X32.315-MM THK) | ||
| 9R-2456 B | [1] | SPACER (45.86X50.98X32.366-MM THK) | ||
| 9R-2457 B | [1] | SPACER (45.86X50.98X32.416-MM THK) | ||
| 9R-2458 B | [1] | SPACER (45.86X50.98X32.467-MM THK) | ||
| 9R-2459 B | [1] | SPACER (45.86X50.98X32.518-MM THK) | ||
| 9R-2460 B | [1] | SPACER (45.86X50.98X32.569-MM THK) | ||
| 16. | 230-4017 | [8] | DISC-BRAKE | |
| 17. | 9R-2474 | [2] | PIN | |
| 18. | 9R-9401 | [8] | PLATE | |
| 19. | 8S-4740 | [12] | BOLT (9/16-12X5-IN) | |
| 20. | 9R-9398 | [2] | MANIFOLD-BRAKE TUBE | |
| 21. | 8H-1607 | [2] | SEAL-O-RING | |
| 22. | 9R-2424 | [2] | GEAR (16-TEETH) | |
| 23. | 8M-8157 | [4] | SEAL-O-RING | |
| 24. | 2A-4576 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 25. | 5L-9656 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 26. | 9X-8880 | [25] | BOLT (5/8-11X2-IN) | |
| 27. | 9R-2508 | [1] | HOUSING | |
| 28. | 113-1147 | [1] | FLANGE | |
| 29. | 9R-2497 | [1] | SEAL | |
| 30. | 9R-2501 | [1] | WASHER (32.5X60.5X5.6-MM THK) | |
| 31. | 9R-2502 | [1] | NUT (1-1/4-18-THD) | |
| 32. | 3B-5302 | [1] | PIN-COTTER | |
| 33. | 9R-2498 | [1] | RETAINER | |
| 34. | 3B-4509 | [6] | LOCKWASHER | |
| 35. | 3K-3379 | [6] | BOLT (9/16-12X1-IN) | |
| 36. | 9X-8883 | [1] | BOLT (5/8-11X2.75-IN) | |
| 37. | 5L-9018 | [4] | BOLT-SOCKET HEAD (1/4-20X1.75-IN) | |
| 38. | 8T-6760 | [2] | PLUG-PIPE (1-1/2-11-1/2 NPT) | |
| 39. | 9R-2499 | [1] | SEAL AS | |
| 40. | 9R-2496 | [1] | SEAL | |
| 41. | 7T-6653 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 42. | 118-5839 | [2] | SEAL-REAR AXLE | |
| 43. | 9R-2512 | [1] | SEAL | |
| 44. | 030-1957 | [2] | CONE-BEARING (TAPERED ROLLER) | |
| 45. | 7T-6654 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 46. | 9R-2505 | [1] | SEAL | |
| 47. | 9R-2504 | [1] | SHAFT | |
| 48. | 9R-2507 M | [1] | SCREW-SPECIAL | |
| 49. | 7T-7621 | [1] | BEARING AS | |
| 50. | 9R-2494 | [1] | RING | |
| 51. | 9R-2480 | [1] | CASE AS | |
| 52. | 2S-0480 | [1] | CUP-TAPERED ROLLER | |
| 53. | 2S-0479 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 54. | 9R-2506 | [1] | FORK | |
| 55. | 9R-2492 | [1] | WASHER (64.389X78.74X3.124-MM THK) | |
| 56. | 9R-2493 | [1] | RING | |
| 57. | 9R-2488 | [1] | GEAR (16-TEETH) | |
| 58. | 9R-2482 | [1] | COUPLING | |
| 59. | 282-9821 | [1] | HOUSING-BRAKE (LH) | |
| 60. | 9R-2486 | [1] | SPRING | |
| 61. | 9R-2483 | [1] | ADAPTER | |
| 62. | 9R-2484 | [2] | BUSHING-TERMINAL | |
| 63. | 9R-2490 | [2] | WASHER (76.2X101.6X1.524-MM THK) | |
| 64. | 9R-2491 | [1] | SPIDER | |
| 65. | 9R-9403 | [4] | PINION | |
| 66. | 9R-2489 | [4] | WASHER-SPRING | |
| 67. | 9R-2485 | [8] | BOLT (1/2-13X2.87-IN) | |
| 68. | 9R-2495 | [2] | SEAL | |
| 69. | 118-9117 | [1] | GEAR SET | |
| 70. | 9R-6671 M | [12] | BOLT (1/2-20X1.62-IN) | |
| 71. | 2M-2570 | [12] | LOCKNUT (1/2-20-THD) | |
| 72. | 9R-2503 | [1] | BLOCK | |
| 73. | 2L-6267 | [1] | LOCKNUT (3/8-24-THD) | |
| 74. | 0T-0318 | [2] | BOLT (7/16-14X1-IN) | |
| 75. | 9R-2487 | [1] | GEAR (16-TEETH) | |
| 76. | 9R-2435 B | [2] | SPACER (22.86X53.85X1.25-MM THK) | |
| 9R-2436 B | [2] | SPACER (22.86X53.85X1.35-MM THK) | ||
| 9R-2437 B | [2] | SPACER (22.86X53.85X1.45-MM THK) | ||
| 9R-2438 B | [2] | SPACER (22.86X53.85X1.55-MM THK) | ||
| 9R-2439 B | [2] | SPACER (22.86X53.85X1.65-MM THK) | ||
| 9R-2440 B | [2] | SPACER (22.86X53.85X1.75-MM THK) | ||
| 9R-2441 B | [2] | SPACER (22.86X53.85X1.85-MM THK) | ||
| 9R-2442 B | [2] | SPACER (22.86X53.85X1.96-MM THK) | ||
| 9R-2443 B | [2] | SPACER (22.86X53.85X2.06-MM THK) | ||
| 9R-2444 B | [2] | SPACER (22.86X53.85X2.16-MM THK) | ||
| 9R-2445 B | [2] | SPACER (22.86X53.85X2.26-MM THK) | ||
| 77. | 9R-6602 | [2] | PLUG-MAGNETIC | |
| 78. | 5P-0540 | [4] | NUT-HEX FULL (9/16-18-THD) | |
| 79. | 282-9822 | [1] | HOUSING-BRAKE (RH) | |
| 80. | 156-1933 | [1] | HOUSING-REAR BRAKE (LH) | |
| 81. | 9R-2426 | [2] | LOCK | |
| 82. | 9R-2466 M | [2] | BOLT (7/8-14X2.2-IN) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP32110206
191-9114: CONTROL GP-DIFFERENTIAL LOCK
191-9114 CONTROL GP-DIFFERENTIAL LOCK
S/N BPE1-663
PART OF 184-7970 POWER TRAIN AR
S/N BPE1-663
PART OF 184-7970 POWER TRAIN AR
For full view, you need register
Parts for your 438D BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9R-5567 | [1] | PLATE AS | |
| 2. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 3. | 5P-0372 | [2] | LOCK PIN | |
| 4. | 8B-1419 | [1] | PIN-CLEVIS | |
| 5. | 191-9113 | [1] | ROD AS | |
| 6. | 8T-4815 | [2] | ROD END | |
| 7. | 8C-4987 | [1] | PIN-CLEVIS | |
| 8. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 9. | 9R-3051 | [1] | ROD | |
| 10. | 9R-2806 | [1] | PIN | |
| 11. | 9R-2807 | [1] | CLIP (RETAINER) | |
| 12. | 103-4867 | [1] | SPRING | |
| 13. | 9R-1581 | [1] | BOOT | |
| M | METRIC PART | |||
#SEBP32110207
111-7907: DRIVE GP-FLEXIBLE COUPLING
111-7907 DRIVE GP-FLEXIBLE COUPLING
S/N BPE1-663; BPN1-475
PART OF 185-7585, 185-7586 TRANSMISSION AR-DIRECT DRIVE, 185-7587 TRANSMISSION AR-POWER SHIFT
AN ATTACHMENT
S/N BPE1-663; BPN1-475
PART OF 185-7585, 185-7586 TRANSMISSION AR-DIRECT DRIVE, 185-7587 TRANSMISSION AR-POWER SHIFT
AN ATTACHMENT
For full view, you need register
Parts for your 438D BACKHOE LOADER:
CATERPILLAR SIS#SEBP32110208
136-3110: FILLER GP-POWER TRAIN OIL
136-3110 FILLER GP-POWER TRAIN OIL -2-WHEEL DRIVE
S/N BPE1-663; BPN1-475
PART OF 185-1490, 185-6399, 226-1604 POWER TRAIN AR
AN ATTACHMENT
S/N BPE1-663; BPN1-475
PART OF 185-1490, 185-6399, 226-1604 POWER TRAIN AR
AN ATTACHMENT
For full view, you need register
Parts for your 438D BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4J-0522 | [2] | SEAL-O-RING | |
| 2. | 5P-7854 | [2] | CLIP | |
| 3. | 7C-8246 | [1] | SPACER (10.5X20X24-MM THK) | |
| 4. | 104-8566 | [1] | GAUGE AS-OIL LEVEL (DIPSTICK) (TRANSMISSION) | |
| 5. | 112-6219 | [1] | BRACKET AS | |
| 6. | 146-1816 | [1] | BRACKET AS | |
| 7. | 125-0851 | [1] | TUBE AS | |
| 8. | 136-3112 | [1] | SPACER | |
| 9. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 11. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| 12. | 8T-4192 M | [2] | BOLT (M12X1.75X25-MM) | |
| 13. | 8T-4223 | [5] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 14. | 8T-4194 M | [2] | BOLT (M12X1.75X50-MM) | |
| 15. | 148-1899 M | [1] | BOLT-CARRIAGE (M10X1.5X60-MM)(M10X1.50X60MM) | |
| 16. | 3J-1907 | [2] | SEAL-O-RING | |
| 17. | 6V-0852 | [2] | CAP-DUST | |
| 18. | 6V-3965 | [2] | FITTING (QUICK DISCONNECT) | |
| 19. | 150-3065 | [1] | ELBOW AS | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-0484 | [1] | ELBOW | ||
| M | METRIC PART | |||
#SEBP32110209
138-7381: FILLER GP-POWER TRAIN OIL
138-7381 FILLER GP-POWER TRAIN OIL -POWER SHIFT
S/N BPE1-663; BPN1-475
PART OF 185-1486, 185-6395, 226-2236 POWER TRAIN AR
AN ATTACHMENT
S/N BPE1-663; BPN1-475
PART OF 185-1486, 185-6395, 226-2236 POWER TRAIN AR
AN ATTACHMENT
For full view, you need register
Parts for your 438D BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3J-1907 | [2] | SEAL-O-RING | |
| 2. | 4J-0522 | [1] | SEAL-O-RING | |
| 3. | 6V-0852 | [2] | CAP-DUST | |
| 4. | 6V-3965 | [2] | FITTING (QUICK DISCONNECT) | |
| 5. | 7C-8246 | [1] | SPACER (10.5X20X24-MM THK) | |
| 6. | 112-6219 | [1] | BRACKET AS | |
| 7. | 138-7378 | [1] | GAUGE AS-OIL LEVEL (DIPSTICK) (TRANSMISSION) | |
| 8. | 138-7380 | [1] | TUBE AS | |
| 9. | 146-1816 | [1] | BRACKET AS | |
| 10. | 148-1899 M | [1] | BOLT-CARRIAGE (M10X1.5X60-MM) | |
| 11. | 5P-7854 | [2] | CLIP | |
| 12. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 13. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 14. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| 15. | 8T-4192 M | [2] | BOLT (M12X1.75X25-MM) | |
| 16. | 8T-4223 | [5] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 17. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| M | METRIC PART | |||
Information:
POWER TRAIN
AXLE GP
Special Instruction
Service Magazine
