AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

169-9530 CYLINDER GP-SWING S/N BPE1-511; BPN1-364 101.6MM(4 IN) BORE X 249MM(10 IN) STROKE PART OF 184-7968 HYDRAULIC AR 438D


HYDRAULIC SYSTEM
CYLINDER GP
FUEL SYSTEM
DRAIN GP-FUEL
HYDRAULIC SYSTEM
DRIVE GP
FILTER GP
FITTING GP
HYDRAULIC GP

BACKHOE LOADER 438D BACKHOE LOADER BPE
 438D Backhoe Loader BPE00001-00663 (MACHINE) POWERED BY 3054 Engine SEBP3211 438D BPE   (1999)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-STICK
213-0234 CYLINDER GP-STICK
CYLINDER GP-SWING
169-9529 CYLINDER GP-SWING
CYLINDER GP-SWING
169-9530 CYLINDER GP-SWING
CYLINDER GP-SWING
191-7735 CYLINDER GP-SWING
CYLINDER GP-SWING
191-8161 CYLINDER GP-SWING
CYLINDER GP-TILT
183-2848 CYLINDER GP-TILT
 

#SEBP32110370
 

169-9530: CYLINDER GP-SWING

169-9530 CYLINDER GP-SWING
S/N BPE1-511; BPN1-364
101.6MM(4 IN) BORE X 249MM(10 IN) STROKE
PART OF 184-7968 HYDRAULIC AR
i01077489 SEBP3211
1699530 CYLINDER GP-SWING Parts scheme
  For full view, you need register

Parts for your 438D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 116-6859 [1] CYLINDER AS (RH)  
  9T-2883 [2] BEARING  
2. 169-6947 [1] NUT (1-1/2-12-THD)  
3. 6J-2797 [1] RING-WEAR  
4. 8C-9160 [1] SEAL AS  
5. 112-1773 [1] PISTON  
6. 175-7900 [1] SEAL-O-RING  
7. 168-2271 [1] RING-BACKUP  
8. 6E-5649 [1] WASHER (1.25-MM THK)  
9. 6E-5651 [1] HEAD  
10. 4T-5613 [1] RING-WEAR  
11. 167-2457 [1] SEAL-WIPER  
12. 167-2304 [1] SEAL-U-CUP  
13. 167-2195 [1] SEAL AS-BUFFER  
14. 125-7894 [1] ROD AS  
15. 102-3582 [1] WASHER (11X19.5X2.5-MM THK)  
16. 2Y-5821 [1] RING  
17. 3N-5739 [1] SPRING  
18. 6E-1478 [1] PLUNGER  
19. 9R-9505 [2] BUSHING  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP32110371
 

191-7735: CYLINDER GP-SWING

191-7735 CYLINDER GP-SWING
S/N BPE512-663; BPN365-475
101.6MM BORE X 249.0MM STROKE
PART OF 184-7968 HYDRAULIC AR
i01508032 SEBP3211
1917735 CYLINDER GP-SWING Parts scheme
  For full view, you need register

Parts for your 438D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 191-7734 [1] CYLINDER AS  
  9T-2883 [2] BEARING  
2. 169-6947 [1] NUT (1-1/2-12-THD)  
3. 6J-2797 [1] RING-WEAR  
4. 5J-5402 [1] SEAL AS  
5. 112-1773 [1] PISTON  
6. 9X-4611 [1] SEAL-O-RING  
7. 2K-6830 [1] RING-BACKUP  
8. 191-6577 [1] HEAD-CYLINDER  
9. 125-7894 [1] ROD AS  
9A. 6E-1478 [1] PLUNGER  
9B. 2Y-5821 [1] RING  
9C. 102-3582 [1] WASHER (11X19.5X2.5-MM THK)  
9D. 3N-5739 [1] SPRING  
9E. 9R-9505 [2] BUSHING  
10. 229-9382 [1] SEAL-WIPER  
11. 167-2304 [1] SEAL-U-CUP  
12. 167-2195 [1] SEAL AS-BUFFER  
13. 4T-5613 [1] RING-WEAR  
14. 8H-7521 [1] SEAL-O-RING  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP32110372
 

191-8161: CYLINDER GP-SWING

191-8161 CYLINDER GP-SWING
S/N BPE512-663; BPN365-475
101.6-MM (4-IN) BORE X 249-MM (9.8-IN) STROKE
PART OF 184-7968 HYDRAULIC AR
i01535422 SEBP3211
1918161 CYLINDER GP-SWING Parts scheme
  For full view, you need register

Parts for your 438D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 191-7738 [1] CYLINDER AS  
1A. 9T-2883 [2] BEARING  
2. 169-6947 [1] NUT (1-1/2-12-THD)  
3. 6J-2797 [1] RING-WEAR  
4. 5J-5402 [1] SEAL AS  
5. 112-1773 [1] PISTON  
6. 9X-4611 [1] SEAL-O-RING  
7. 2K-6830 [1] RING-BACKUP  
8. 191-6577 [1] HEAD-CYLINDER  
9. 125-7894 [1] ROD AS  
9A. 6E-1478 [1] PLUNGER  
9B. 2Y-5821 [1] RING  
9C. 102-3582 [1] WASHER (11X19.5X2.5-MM THK)  
9D. 3N-5739 [1] SPRING  
9E. 9R-9505 [2] BUSHING  
10. 229-9382 [1] SEAL-WIPER  
11. 167-2304 [1] SEAL-U-CUP  
12. 167-2195 [1] SEAL AS-BUFFER  
13. 4T-5613 [1] RING-WEAR  
14. 8H-7521 [1] SEAL-O-RING  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP32110373
 

183-2848: CYLINDER GP-TILT

183-2848 CYLINDER GP-TILT
S/N BPE1-511; BPN1-364
75-MM (2.95-IN) BORE X 884.5-MM (34.8-IN) STROKE
PART OF 184-7968 HYDRAULIC AR
i01338996 SEBP3211
1832848 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your 438D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 148-2593 [1] HEAD  
2. 184-1615 [1] CYLINDER AS  
2A. 9R-0153 [2] BUSHING  
3. 184-2365 [1] ROD AS  
4. 184-2409 [1] PISTON  
5. 143-8918 [1] RING-WEAR  
6. 167-2195 [1] SEAL AS-BUFFER  
7. 167-2304 [1] SEAL-U-CUP  
8. 167-2457 [1] SEAL-WIPER  
9. 173-9779 M [1] BOLT (M24X3X80-MM)  
10. 184-6970 [1] SEAL AS  
11. 1H-7339 [1] SEAL-O-RING  
12. 4T-5613 [1] RING-WEAR  
13. 6J-5731 [1] RING-BACKUP  
14. 6V-8237 [1] WASHER (26X44X4-MM THK)  
  M   METRIC PART
 

#SEBP32110374
 

192-3884: CYLINDER GP-TILT

192-3884 CYLINDER GP-TILT
S/N BPE512-663; BPN365-475
75-MM (2.95-IN) BORE X 884.5-MM (34.82-IN) STROKE
PART OF 184-7968 HYDRAULIC AR
i01564114 SEBP3211
1923884 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your 438D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 184-2365 [1] ROD AS  
1A. 9R-0321 [2] BUSHING  
2. 184-2409 [1] PISTON  
3. 192-3886 [1] CYLINDER AS  
3A. 6V-8398 [1] SEAL-O-RING  
3B. 9R-0153 [2] BUSHING  
3C. 203-7806 [1] ELBOW  
4. 143-8918 [1] RING-WEAR  
5. 289-2935 [1] SEAL AS-BUFFER  
6. 167-2304 [1] SEAL-U-CUP  
7. 229-9382 [1] SEAL-WIPER  
8. 173-9779 M [1] BOLT (M24X3X80-MM)  
9. 210-7029 [1] SEAL AS  
10. 191-6149 [1] HEAD  
11. 1H-7339 [1] SEAL-O-RING  
12. 4T-5613 [1] RING-WEAR  
13. 6J-2420 [1] RING  
14. 6V-8237 [1] WASHER (26X44X4-MM THK)  
15. 8F-8882 [1] SEAL-O-RING  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP32110375
 

208-8658: DRAIN GP-ECOLOGY

208-8658 DRAIN GP-ECOLOGY
S/N BPE1-663; BPN1-475
AN ATTACHMENT
i01667411 SEBP3211
2088658 DRAIN GP-ECOLOGY Parts scheme
  For full view, you need register

Parts for your 438D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-0743 E HOSE (40CM)  
2. 8T-0154 [1] CLAMP-HOSE  
3. 165-2273 [1] VALVE AS-SHUTOFF  
  3K-0360 [1] SEAL-O-RING  
  6V-7238 [1] VALVE-SHUTOFF  
  E   ORDER BY THE CENTIMETER
 

#SEBP32110376
 

112-1826: DRIVE & MTG GP-PUMP

112-1826 DRIVE & MTG GP-PUMP
S/N BPE1-663; BPN1-475
PART OF 184-7968 HYDRAULIC AR
i00487466 SEBP3211
1121826 DRIVE & MTG GP-PUMP Parts scheme
  For full view, you need register

Parts for your 438D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-9405 M [4] BOLT-SOCKET HEAD (M4X0.7X16-MM)  
2. 9U-8886 [1] RING-SEAL  
3. 115-1918 [1] PLATE  
4. 117-3534 [1] ADAPTER  
5. 274-4555 [1] HUB  
6. 128-5596 Y [1] SHAFT GP-PUMP DRIVE  
7. 175-7904 [1] SEAL-O-RING  
8. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
9. 8T-7338 M [2] BOLT (M16X2X45-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32110377
 

178-0094: FILTER GP-OIL

178-0094 FILTER GP-OIL -HYDRAULIC
S/N BPE1-663; BPN1-475
PART OF 184-7968 HYDRAULIC AR
i01361850 SEBP3211
1780094 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 438D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 126-1817 [1] FILTER-OIL (ULTRA HIGH EFFICIENCY)(HYDRAULIC)  
2. 164-6709 [1] PLUG AS  
  3J-1907 [1] SEAL-O-RING  
  5F-9144 [1] SEAL-O-RING  
 

#SEBP32110378
 

132-8769: FITTING GP-HYDRAULIC

132-8769 FITTING GP-HYDRAULIC -QUICK DISCONNECT
S/N BPE1-663; BPN1-475
FOR USE WITH HYDRAULIC ATTACHMENTS
AN ATTACHMENT
i00498765 SEBP3211
1328769 FITTING GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 438D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 106-0406 [1] FITTING (QUICK DISCONNECT, MALE)  
2. 106-0401 [1] FITTING (QUICK DISCONNECT, FEMALE)  
 

#SEBP32110379
 

184-7968: HYDRAULIC AR

184-7968 HYDRAULIC AR
S/N BPE1-663; BPN1-475
PART OF 184-7854, 184-7855 COMMON AR
i01617818 SEBP3211
  For full view, you need register

Parts for your 438D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  202-6139 Y [1] LINES GP-PILOT  
  152-9148 Y [1] CYLINDER GP-BOOM  
    S/N BPE1-511; BPN1-364
  206-3630 Y [1] CYLINDER GP-BOOM  
    S/N BPE512-663; BPN365-475
  180-7490 Y [2] CYLINDER GP-LIFT  
    S/N BPE1-511; BPN1-364
  192-3791 Y [2] CYLINDER GP-LIFT  
    S/N BPE512-663; BPN365-475
  173-4565 Y [2] CYLINDER GP-STABILIZER  
  173-4015 Y [1] CYLINDER GP-STICK  
    S/N BPE1-511; BPN1-364
  206-0509 Y [1] CYLINDER GP-STICK  
    S/N BPE512-663; BPN365-475
  169-9529 Y [1] CYLINDER GP-SWING  
    S/N BPE1-511; BPN1-364
  191-8161 Y [1] CYLINDER GP-SWING  
    S/N BPE512-663; BPN365-475
  169-9530 Y [1] CYLINDER GP-SWING  
    S/N BPE1-511; BPN1-364
  191-7735 Y [1] CYLINDER GP-SWING  
    S/N BPE512-663; BPN365-475
  183-2848 Y [2] CYLINDER GP-TILT  
    S/N BPE1-511; BPN1-364
  192-3884 Y [2] CYLINDER GP-TILT  
    S/N BPE512-663; BPN365-475
  178-0094 Y [1] FILTER GP-OIL (HYDRAULIC)  
  186-4168 Y [1] LINES GP-PILOT (STABILIZER)  
    S/N BPE1-524; BPN1-375
  202-5928 Y [1] LINES GP-PILOT (STABILIZER)  
    S/N BPE525-663; BPN376-475
  185-3414 Y [1] LINES GP-STABILIZER  
  183-8505 Y [1] LINES GP-SWING  
  112-1826 Y [1] DRIVE & MTG GP-PUMP  
  185-3167 Y [1] MOUNTING GP-BANK VALVE  
  185-5918 Y [1] PUMP GP-PISTON  
  163-7934 Y [1] TANK & MTG GP-HYDRAULIC  
  185-9784 Y [1] VALVE & MTG GP-BANK (STABILIZER)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 438D :

CYLINDER GP-SWING
169-9529 CYLINDER GP-SWING
CYLINDER GP-STICK
213-0234 CYLINDER GP-STICK
CYLINDER GP-STICK
206-0509 CYLINDER GP-STICK
CYLINDER GP-STICK
173-4015 CYLINDER GP-STICK
CYLINDER GP-STABILIZER
173-4565 CYLINDER GP-STABILIZER
CYLINDER GP-MULTIPURPOSE BUKT
185-1839 CYLINDER GP-MULTIPURPOSE BUKT
CYLINDER GP-LIFT
192-3791 CYLINDER GP-LIFT
CYLINDER GP-LIFT
180-7490 CYLINDER GP-LIFT
CYLINDER GP-SWING
191-7735 CYLINDER GP-SWING
CYLINDER GP-SWING
191-8161 CYLINDER GP-SWING
CYLINDER GP-TILT
183-2848 CYLINDER GP-TILT
CYLINDER GP-TILT
192-3884 CYLINDER GP-TILT
DRAIN GP-ECOLOGY
208-8658 DRAIN GP-ECOLOGY
DRIVE & MTG GP-PUMP
112-1826 DRIVE & MTG GP-PUMP
FILTER GP-OIL
178-0094 FILTER GP-OIL
FITTING GP-HYDRAULIC
132-8769 FITTING GP-HYDRAULIC

Truck sale:

1995 CAT 438D
USD $17,608 
1995 CAT 438D

AMMAR GENERAL TRADING
 
Call 
2002 CAT 438D

MyTractor
TENERIFE, ??, Spain
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.