273-6372 SUSPENSION GP-SEAT -AIR S/N BRG1-827; BRY1-746 PART OF 206-1792 SEAT GP-SUSPENSION AN ATTACHMENT 442D

Part No	Qty	Parts name
397-6409 Y	[1]	AIR COMPRESSOR GP-SEAT (SUSPENSION SEAT)
164-1215	[1]	ABSORBER AS-SHOCK (SEAT)
164-1218	[2]	ARM AS-SUSPENSION (OUTER)
260-0060	[1]	ARM AS-SUSPENSION (INNER)
4B-9784	[8]	BALL
260-0063	[1]	BASE-SEAT
164-1230	[12]	BEARING
260-0067	[2]	BEARING
	[1]	BEARING-FLANGED
161-9289	[2]	BLOCK-SLIDER
260-0043	[1]	BLOCK-STOP
0S-0509	[1]	BOLT (3/8-16X0.75-IN)
1H-3337	[4]	BOLT (1/4-20X0.875-IN)
4M-0061	[2]	BOLT (5/16-18X0.75-IN)
7X-0481	[1]	BOLT (1/2-13X8-IN)
260-0041	[1]	BOLT (3/4-10X1.42-IN)
197-6657 M	[1]	BOLT-CARRIAGE (M12X1.75X80-MM)
164-1240	[1]	BOOT
237-3943	[1]	BRACKET
164-1219	[1]	BRACKET AS (FRONT)
164-1220	[1]	BRACKET AS (REAR)
164-1229	[4]	BUMPER
164-1237	[1]	BUSHING
111-5042	[34]	FASTENER
260-0036	[1]	HARNESS AS-RIDE CONTROL
260-0046	[1]	HOUSING-UPPER
102-8804	[1]	KIT-RECEPTACLE (4-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)
149-4745	[2]	KIT-SLIDER BLOCK (SUSPENSION SEAT)
		(EACH INCLUDES BOLT & BLOCK-SLIDER)
260-0057	[1]	LATCH AS-SLIDE
260-0031	[1]	LEVER
260-0032	[1]	LEVER
1K-6872	[1]	LOCKNUT (1/2-13-THD)
2D-6235	[4]	LOCKNUT (1/4-20-THD)
2K-4973	[8]	LOCKNUT (3/8-16-THD)
6V-7687 M	[1]	LOCKNUT (M12X1.75-THD)
096-4882 M	[2]	LOCKNUT (M8X1.25-THD)
142-2928	[4]	LOCKNUT (4-40-THD)
3B-4505	[2]	LOCKWASHER
3J-4818	[2]	LOCKWASHER (EXTERNAL TOOTH)
6V-8185	[2]	NUT (1/4-20-THD)
2L-5893	[1]	PIN-SPRING
4H-8380	[4]	PIN-SPRING
164-1232	[1]	PLATE
260-0052	[1]	PLATE AS-SLIDE
260-0051	[1]	PLATE AS-UPPER
260-0044	[1]	PLATE-LATCH
5V-1497	[2]	RETAINER
215-1242	[1]	RING
8S-7803	[3]	RING-RETAINING
130-8343 M	[1]	SCREW-BUTTON HEAD (3/8-16X0.625-IN)
6L-7155	[2]	SCREW-MACHINE (1/4-20X0.5-IN)
173-5787	[2]	SETSCREW (1/4-20-THD)
164-1226	[2]	SHAFT
260-0047	[2]	SHAFT-UPPER
260-0049	[2]	SHAFT-LOWER
161-9288	[1]	SHAFT-PIVOT
260-0030	[1]	SHAFT-PIVOT
164-1233	[2]	SPACER (13X25.4X20.5-MM THK)
164-1238	[1]	SPACER (12.8X22.2X3.1-MM THK)
164-1239	[2]	SPACER (13.5X19X61.9-MM THK)
163-1135	[1]	SPRING
260-0034	[1]	SPRING-RETURN
260-0035	[1]	SPRING-RETURN
260-0033	[1]	SPRING-TORSION
218-0235	[2]	SWITCH AS-LIMIT (SUSPENSION SEAT)
		(EACH INCLUDES)
102-8803	[1]	KIT-RECEPTACLE (3-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)
8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
7X-0622	[6]	WASHER (13X24X2.5-MM THK)
9X-1481	[2]	WASHER (13X25.4X1.6-MM THK)
M		METRIC PART
Y		SEPARATE ILLUSTRATION

#SEBP32120791

164-1370: TRIM GP-CAB

TRIM GP-CAB

164-1370 TRIM GP-CAB
S/N BRG1-827; BRY1-746
BRUSH SEALS
PART OF 184-9745, 184-9746 CAB AR-ENCLOSED ROPS
AN ATTACHMENT

i01374001 SEBP3212

For full view, you need register

Parts for your 442D BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9R-1948	[4]	RIVET
2.	164-1110	[1]	COVER (PARKING BRAKE)
3.	164-1366	[1]	BRUSH AS
4.	9X-2044 M	[2]	SCREW-TRUSS HEAD (M6X1X16-MM)
	M		METRIC PART

#SEBP32120792

108-8251: VISOR GP-CAB

VISOR GP-CAB

108-8251 VISOR GP-CAB
S/N BRG1-827; BRY1-746
PART OF 184-9746 CAB AR-ENCLOSED ROPS
AN ATTACHMENT

i00486219 SEBP3212

For full view, you need register

Parts for your 442D BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9R-3205	[1]	VISOR AS
2.	9R-3204	[1]	PLATE AS
3.	8T-4171 M	[4]	BOLT (M6X1X12-MM)
4.	9R-3203	[2]	PLATE
	M		METRIC PART

#SEBP32120793

167-8187: WASHER GP-WINDOW

WASHER GP-WINDOW

167-8187 WASHER GP-WINDOW
S/N BRG1-827; BRY1-746
PART OF 184-9745, 184-9746 CAB AR-ENCLOSED ROPS
AN ATTACHMENT

i01373723 SEBP3212

For full view, you need register

Parts for your 442D BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-4971 M	[1]	BOLT (M6X1X30-MM)
2.	276-8791	[1]	CLIP
3.	8T-1118	[1]	NOZZLE AS-WASHER
4.	9R-3469	[2]	DIAPHRAGM
5.	112-9450	[1]	PLATE
6.	121-6936	[2]	CONNECTOR
7.	123-8670	[1]	TANK AS (WINDOW WASHER)
	123-8669	[1]	TANK
	117-2823	[1]	CAP
	117-2824	[2]	GROMMET
	117-2826	[2]	PUMP AS-WASHER
8.	131-1368	[1]	HARNESS AS-WINDOW WIPER (WINDOW WASHER)
9.	168-9906	[1]	BRACKET
10.	186-0817	[1]	WASHER-HARD (7X19X2-MM THK)
11.	129-3178 M	[1]	LOCKNUT (M6X1-THD)
12.	7X-7729	[1]	WASHER (11X25X3-MM THK)
13.	8T-4121 B	[2]	WASHER-HARD (11X21X2.5-MM THK)
14.	8T-4201 M	[2]	BOLT-LOCKING (M10X1.5X20-MM)
15.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
16.	144-0195 E		HOSE (201-CM)
17.	144-0195 E		HOSE (15-CM EACH)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP32120794

164-1059: WINDOW GP-CAB

WINDOW GP-CAB

164-1059 WINDOW GP-CAB -RH
S/N BRG1-827; BRY1-746
PART OF 180-7225 CAB GP-ENCLOSED ROPS
AN ATTACHMENT

i01374504 SEBP3212

For full view, you need register

Parts for your 442D BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7X-2393	[1]	BUMPER-CONICAL
2.	8Y-7309	[1]	RETAINER
3.	100-7608	[1]	HANDLE
4.	129-8542	[6]	RETAINER
5.	129-8545	[8]	WASHER (13X40X3-MM THK)
6.	136-4192 M	[4]	BOLT (M6X1X35-MM)
7.	143-2830	[1]	LATCH AS
	6V-7743 M	[2]	LOCKNUT (M6X1-THD)
	9X-2045 M	[2]	SCREW-TRUSS HEAD (M6X1X20-MM)
	143-2827	[1]	SPRING
8.	154-5423	[2]	SPACER (6.6X12.7X17-MM THK)
9.	154-5424	[2]	HINGE
10.	159-4951	[2]	LATCH AS
	5C-2874 M	[2]	NUT (M5X0.8-THD)
	161-6984 M	[2]	SCREW-TRUSS HEAD (M5X0.8X20-MM)
	161-6987	[2]	WASHER-HARD (5.2X16X1.5-MM THK)
	161-9294	[2]	SPRING
	162-6556 M	[2]	LOCKNUT (M6X1-THD)
11.	164-1064	[1]	GLASS-CAB
12.	5C-7261 M	[1]	NUT (M8X1.25-THD)
13.	6V-7743 M	[2]	LOCKNUT (M6X1-THD)
14.	148-5353 E		SEAL (378-CM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP32120795

164-1060: WINDOW GP-CAB

WINDOW GP-CAB

164-1060 WINDOW GP-CAB -LH
S/N BRG1-827; BRY1-746
PART OF 180-7225 CAB GP-ENCLOSED ROPS
AN ATTACHMENT

i01374537 SEBP3212

For full view, you need register

Parts for your 442D BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7X-2393	[1]	BUMPER-CONICAL
2.	8Y-7309	[1]	RETAINER
3.	100-7608	[1]	HANDLE
4.	129-8542	[6]	RETAINER
5.	129-8545	[8]	WASHER (13X40X3-MM THK)
6.	136-4192 M	[4]	BOLT (M6X1X35-MM)
7.	143-2830	[1]	LATCH AS
	6V-7743 M	[2]	LOCKNUT (M6X1-THD)
	9X-2045 M	[2]	SCREW-TRUSS HEAD (M6X1X20-MM)
	143-2827	[1]	SPRING
8.	154-5423	[2]	SPACER (6.6X12.7X17-MM THK)
9.	154-5424	[2]	HINGE
10.	159-4950	[2]	LATCH AS
	5C-2874 M	[2]	NUT (M5X0.8-THD)
	161-6984 M	[2]	SCREW-TRUSS HEAD (M5X0.8X20-MM)
	161-6987	[2]	WASHER-HARD (5.2X16X1.5-MM THK)
	161-9294	[2]	SPRING
	162-6556 M	[2]	LOCKNUT (M6X1-THD)
11.	164-1065	[1]	GLASS-CAB
12.	5C-7261 M	[1]	NUT (M8X1.25-THD)
13.	6V-7743 M	[2]	LOCKNUT (M6X1-THD)
14.	148-5353 E		SEAL (378-CM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP32120796

164-1300: WINDOW GP-CAB

WINDOW GP-CAB

164-1300 WINDOW GP-CAB -REAR
S/N BRG1-827; BRY1-746
PART OF 180-7225 CAB GP-ENCLOSED ROPS
AN ATTACHMENT

i01386227 SEBP3212

For full view, you need register

Parts for your 442D BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	110-5602	[2]	KNOB
2.	131-8203 M	[4]	SCREW-FLAT HEAD (M8X1.25X30-MM)
3.	140-9921	[2]	INSERT-THREADED
4.	146-7744	[1]	KIT-LATCH
5.	146-7745	[1]	KIT-LATCH
6.	150-8015	[2]	GASKET
7.	164-1304	[1]	GLASS
8.	164-1308	[2]	ROLLER
9.	164-1311	[1]	LINKAGE AS
10.	164-1317	[1]	FRAME AS
	140-9921	[4]	INSERT-THREADED
11.	164-1328	[2]	SPRING AS-GAS
12.	164-1342 M	[4]	BOLT-SPECIAL (M10X1.5X28-MM)
13.	164-1343	[4]	WASHER-THRUST (13.6X30X5.1-MM THK)
14.	164-1344	[4]	WASHER-THRUST (13.6X30X2.1-MM THK)
15.	164-1345	[4]	BEARING
16.	164-1346	[4]	STRIKER
17.	164-1348	[1]	WINDOW AS
	164-1303	[1]	GLASS
	164-1316	[1]	FRAME AS
18.	164-1351	[2]	PIN
19.	164-1352	[1]	LATCH AS
20.	164-1353	[1]	LATCH AS
21.	167-8182	[2]	BUMPER
22.	171-2870	[2]	SPACER (7X10X5.4-MM THK)
23.	201-9465 B	[4]	SHIM (1-MM THK)
24.	205-7536	[1]	BRACKET AS (LH)
25.	205-7538	[1]	BRACKET AS (RH)
26.	119-8349	[2]	CAP
27.	121-9743	[1]	SEAL
28.	129-3180 M	[4]	LOCKNUT (M12X1.75-THD)
29.	5P-4115	[6]	WASHER-HARD (7.2X19X2-MM THK)
30.	5P-4116	[4]	WASHER-HARD (8.8X20.5X2-MM THK)
31.	8T-4138 M	[2]	BOLT (M6X1X20-MM)
32.	8T-4200 M	[4]	BOLT (M8X1.25X16-MM)
33.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
34.	9X-2044 M	[4]	SCREW-TRUSS HEAD (M6X1X16-MM)
35.	9X-2132	[4]	RETAINER
36.	164-1354 E		CHANNEL-WINDOW (86.6CM)
37.	5P-5637 D		SEAL (0.85M)
38.	9X-6383 E		SEAL (85CM)
39.	164-1314 E	[2]	SEAL-BULK (148.5CM)
40.	164-1354 E	[2]	CHANNEL-WINDOW (95.4CM)
41.	164-1354 E	[2]	CHANNEL-WINDOW (50.9CM)
	B		USE AS REQUIRED
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP32120797

164-1073: WINDOW GP-DOOR

WINDOW GP-DOOR

164-1073 WINDOW GP-DOOR -RH
S/N BRG1-827; BRY1-746
PART OF 164-1061 DOOR GP-CAB
AN ATTACHMENT

i01380276 SEBP3212

For full view, you need register

Parts for your 442D BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8Y-7287	[2]	HINGE
2.	100-7608	[1]	HANDLE
3.	129-8542	[5]	RETAINER
4.	129-8543	[2]	SPACER (16-MM THK)
5.	129-8545	[6]	WASHER (13X40X3-MM THK)
6.	136-4192 M	[3]	BOLT (M6X1X35-MM)
7.	143-2830	[1]	LATCH AS
	6V-7743 M	[2]	LOCKNUT (M6X1-THD)
	9X-2045 M	[2]	SCREW-TRUSS HEAD (M6X1X20-MM)
	143-2827	[1]	SPRING
8.	159-4950	[1]	LATCH AS
	5C-2874 M	[1]	NUT (M5X0.8-THD)
	161-6984 M	[1]	SCREW-TRUSS HEAD (M5X0.8X20-MM)
	161-6987	[1]	WASHER-HARD (5.2X16X1.5-MM THK)
	161-9294	[1]	SPRING
	162-6556 M	[1]	LOCKNUT (M6X1-THD)
9.	164-1066	[1]	GLASS
10.	6V-7743 M	[2]	LOCKNUT (M6X1-THD)
11.	148-5353 E		SEAL (342-CM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP32120798

164-1074: WINDOW GP-DOOR

WINDOW GP-DOOR

164-1074 WINDOW GP-DOOR -LH
S/N BRG1-827; BRY1-746
PART OF 164-1062 DOOR GP-CAB
AN ATTACHMENT

i01374795 SEBP3212

For full view, you need register

Parts for your 442D BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8Y-7287	[2]	HINGE
2.	100-7608	[1]	HANDLE
3.	129-8542	[5]	RETAINER
4.	129-8543	[2]	SPACER (16-MM THK)
5.	129-8545	[6]	WASHER (13X40X3-MM THK)
6.	136-4192 M	[3]	BOLT (M6X1X35-MM)
7.	143-2830	[1]	LATCH AS
	6V-7743 M	[2]	LOCKNUT (M6X1-THD)
	9X-2045 M	[2]	SCREW-TRUSS HEAD (M6X1X20-MM)
	143-2827	[1]	SPRING
8.	159-4951	[1]	LATCH AS
	5C-2874 M	[1]	NUT (M5X0.8-THD)
	161-6984 M	[1]	SCREW-TRUSS HEAD (M5X0.8X20-MM)
	161-6987	[1]	WASHER-HARD (5.2X16X1.5-MM THK)
	161-9294	[1]	SPRING
	162-6556 M	[1]	LOCKNUT (M6X1-THD)
9.	164-1067	[1]	GLASS
10.	6V-7743 M	[2]	LOCKNUT (M6X1-THD)
11.	148-5353 E		SEAL (342-CM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP32120799

174-2024: WIPER GP-WINDOW

WIPER GP-WINDOW

174-2024 WIPER GP-WINDOW
S/N BRG1-827; BRY1-746
PART OF 184-9745, 184-9746 CAB AR-ENCLOSED ROPS
AN ATTACHMENT

i01373801 SEBP3212

For full view, you need register

Parts for your 442D BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6K-0806	[1]	STRAP-CABLE
2.	8T-4970 M	[5]	BOLT (M6X1X14-MM)
3.	101-0745	[2]	BLADE AS-WIPER (600-MM)
4.	132-2249	[2]	SPACER (7.4X12.7X24-MM THK)
5.	132-2250	[1]	SPACER (21X35X10-MM THK)
6.	154-5410	[1]	ARM-WINDOW WIPER
7.	174-2025	[1]	MOTOR GP-WINDOW WIPER (REAR)
	186-3735	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
8.	174-2026 J	[1]	ARM AS-WIPER
	194-5171 E		HOSE (33-CM)
9.	174-5456	[1]	PLATE
10.	186-2589 Y	[1]	MOTOR GP-WINDOW WIPER (FRONT)
11.	8C-8451 M	[2]	BOLT (M6X1X40-MM)
12.	8T-4205	[7]	WASHER-HARD (7.2X14.5X2-MM THK)

			AVAILABLE REPAIR KIT(S):
	163-4759 J	[1]	KIT-REPAIR (WINDOW WIPER ARM)
	E		ORDER BY THE CENTIMETER
	J		KIT MARKED J AVAILABLE FOR PART MARKED J
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION