BASIC ENGINE
FLYWHEEL GPGEAR GP
HOUSING GP-FLYWHEEL
GEAR GP
CYLINDER HEAD GP
ENGINE GP
SERVICE EQUIPMENT AND SUPPLIES
KIT-REBUILDBASIC ENGINE
FLYWHEEL GP
#SEBP32260040
116-5386: FLYWHEEL GP
For full view, you need register
Parts for your 345B II EXCAVATOR:
CATERPILLAR SIS#SEBP32260041
163-0045: FLYWHEEL GP
For full view, you need register
Parts for your 345B II EXCAVATOR:
CATERPILLAR SIS#SEBP32260042
117-2750: GEAR GP-FRONT
For full view, you need register
Parts for your 345B II EXCAVATOR:
CATERPILLAR SIS#SEBP32260043
138-1989: HOUSING GP-FLYWHEEL
138-1989 HOUSING GP-FLYWHEEL
S/N 7ZR4337-25995
PART OF 194-6646 ENGINE AR-COMPLETE
S/N 7ZR4337-25995
PART OF 194-6646 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 345B II EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-2455 | [1] | SENSOR GP-SPEED (ENGINE) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1386 E | SLEEVE (14CM) | |||
| 2. | 7C-1445 | [1] | COVER | |
| 3. | 138-1990 | [1] | HOUSING-FLYWHEEL | |
| 4. | 274-4556 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 9S-4185 | [1] | PLUG (3/4-16-THD) | ||
| 8L-2786 | [1] | SEAL-O-RING | ||
| 5. | 061-9455 | [1] | SEAL-O-RING | |
| 6. | 169-5861 | [1] | PLUG AS | |
| 3K-8460 | [1] | PLUG (1/2-20-THD) | ||
| 5P-7814 | [1] | SEAL-O-RING | ||
| 7. | 319-6234 | [1] | PLUG AS | |
| 9S-9334 | [1] | PLUG | ||
| 238-5084 | [1] | SEAL-O-RING | ||
| 8. | 5D-9344 | [1] | SEAL-O-RING | |
| 9. | 5P-8245 | [12] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 10. | 6V-5219 M | [2] | BOLT (M8X1.25X40-MM) | |
| 11. | 6V-8197 M | [12] | BOLT (M12X1.75X40-MM) | |
| 12. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 15. | 1U-8846 B | SEALANT-GASKET | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP32260044
115-3006: HOUSING GP-FRONT
For full view, you need register
Parts for your 345B II EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 136-4296 | [1] | HOUSING AS-FRONT | |
| 1A. | 2A-3348 | [2] | DOWEL | |
| 1B. | 6V-3535 | [2] | DOWEL | |
| 126-0102 | [1] | HOUSING AS-FRONT | ||
| 1C. | 8T-0343 M | [2] | BOLT-SOCKET HEAD (M12X1.75X55-MM) | |
| 3H-7654 | [2] | WASHER-HARD (13.5X22.5X3-MM THK) | ||
| 1D. | 2H-5549 | [1] | RING-RETAINING | |
| 1E. | 115-9424 | [1] | GEAR-PUMP DRIVE (34-TEETH) | |
| 1F. | 8H-9789 | [2] | BALL BEARING | |
| 2. | 204-0712 M | [13] | BOLT (M8X1.25X30-MM) | |
| -OR- | ||||
| 6V-5219 M | [13] | BOLT (M8X1.25X40-MM) | ||
| 3. | 9M-1974 | [33] | WASHER-HARD (8.8X16X2-MM THK) | |
| 4. | 262-7131 C | [1] | COVER GP-FRONT HOUSING | |
| 5. | 174-2475 C | [1] | SEAL-INTEGRAL | |
| 6. | 262-8382 | [1] | GASKET | |
| 7. | 226-4755 C | [1] | SEAL GP-CRANKSHAFT | |
| 7A. | 220-3373 | [1] | SEAL-RING | |
| 8. | 3E-8016 M | [1] | BOLT-SELF-LOCKING (M8X1.25X25-MM) | |
| 9. | 5P-0537 | [5] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 10. | 6V-8225 M | [5] | NUT (M6X1-THD) | |
| 11. | 6V-3940 M | [19] | BOLT (M8X1.25X25-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP32260045
415-8632: KIT-CYLINDER HEAD
415-8632 KIT-CYLINDER HEAD
S/N CCC1-UP; FEE1-UP; CDJ1-UP
THIS CYLINDER HEAD REBUILD KIT IS BEING DESIGNED FOR USE OF THE 3176C ENGINE FOR THE FOLLOWING E MODELS:. 345B, 814F, 815F, 816F, D7R, 140H, 14H, 160H, 163H, D7RII, 966GII, AND 572RII
FOR USE WITH @@@@@194-6646@@@@@
FIELD INSTALLATION
S/N CCC1-UP; FEE1-UP; CDJ1-UP
THIS CYLINDER HEAD REBUILD KIT IS BEING DESIGNED FOR USE OF THE 3176C ENGINE FOR THE FOLLOWING E MODELS:. 345B, 814F, 815F, 816F, D7R, 140H, 14H, 160H, 163H, D7RII, 966GII, AND 572RII
FOR USE WITH @@@@@194-6646@@@@@
FIELD INSTALLATION
For full view, you need register
Parts for your 345B II EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 6I-1638 | [12] | BASE-INJECTOR POSITIONING | ||
| 100-8150 | [24] | GUIDE-VALVE | ||
| 138-2006 | [12] | INSERT-VALVE SEAT (INLET) | ||
| 179-9453 | [12] | INSERT-VALVE SEAT (EXHAUST) | ||
| 2A-4429 | [48] | LOCK-RETAINER | ||
| 3B-0623 | [8] | PLUG-CUP (CYLINDER HEAD) | ||
| 6V-7604 | [16] | PLUG-CUP (MARKED X) | ||
| 6I-2663 | [24] | ROTOCOIL AS | ||
| (EACH INCLUDES) | ||||
| 6I-2662 | [1] | SHIELD | ||
| 7C-8581 | [1] | ROTOCOIL AS | ||
| 116-1102 | [6] | SLEEVE-INJECTOR | ||
| 224-4441 | [24] | SPRING (VALVE) | ||
| 332-2152 | [24] | SPRING-VALVE | ||
| 133-7029 | [12] | VALVE-EXHAUST | ||
| 7E-9578 | [12] | VALVE-INLET | ||
#SEBP32260046
417-4374: KIT-CYLINDER HEAD GASKET
417-4374 KIT-CYLINDER HEAD GASKET
S/N CCC1-UP; FEE1-UP; CDJ1-UP; 7ZR4337-25995
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REBUILD & REINSTALL A SINGLE CYLINDER HEAD. KIT INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT, AS NEEDED. FOR IN LINE 4 & 6 CYLINDER HEAD ONLY, THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED. BOLTS, NUTS, STUDS, WASHERS, SPACERS. APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBERS 317-8750-UP
PART OF 415-8666 KIT-ENGINE OVERHAUL, 431-6548 KIT-ENGINE PARTS
ALSO FIELD INSTALLATION
S/N CCC1-UP; FEE1-UP; CDJ1-UP; 7ZR4337-25995
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REBUILD & REINSTALL A SINGLE CYLINDER HEAD. KIT INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT, AS NEEDED. FOR IN LINE 4 & 6 CYLINDER HEAD ONLY, THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED. BOLTS, NUTS, STUDS, WASHERS, SPACERS. APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBERS 317-8750-UP
PART OF 415-8666 KIT-ENGINE OVERHAUL, 431-6548 KIT-ENGINE PARTS
ALSO FIELD INSTALLATION
For full view, you need register
Parts for your 345B II EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1P-0451 | [1] | GASKET | ||
| 1S-4295 | [1] | GASKET (TURBOCHARGER) | ||
| 7E-5555 | [1] | GASKET | ||
| 7E-7912 | [1] | GASKET | ||
| 7W-5164 | [3] | GASKET | ||
| 8H-9788 | [1] | GASKET | ||
| 9Y-1758 | [1] | GASKET | ||
| 101-3125 | [1] | GASKET (AIR INLET MANIFOLD) | ||
| 109-5313 | [6] | GASKET | ||
| 118-2797 | [4] | GASKET | ||
| 188-6126 | [1] | GASKET | ||
| 197-8418 | [1] | GASKET | ||
| 197-8419 | [1] | GASKET (TURBOCHARGER) | ||
| 187-3307 | [1] | GASKET AS-CYLINDER HEAD | ||
| (COMPATIBLE WITH CYLINDER HEADS WITH A STRAIGHT CASTING PROFILE ON THE LIFTER LEDGE. | ||||
| 7ZR02671-UP, REFER TO REHS7793 TABLE 10 IN SISWEB.) | ||||
| 109-5309 | [1] | GASKET-VALVE COVER | ||
| 7C-8292 | [8] | ISOLATOR | ||
| 9X-6620 M | [4] | LOCKNUT (M10X1.5-THD) | ||
| 5P-5678 | SEAL (6-M) | |||
| 361-8205 | [6] | SEAL | ||
| 3S-9643 | [2] | SEAL-LIP TYPE | ||
| 3J-1907 | [4] | SEAL-O-RING | ||
| 3J-7354 | [4] | SEAL-O-RING | ||
| 3K-0360 | [6] | SEAL-O-RING | ||
| 228-4947 | [2] | SEAL-O-RING | ||
| 4G-4972 | [6] | SEAL-O-RING | ||
| 6V-3251 | [1] | SEAL-O-RING | ||
| 136-7227 | [1] | SEAL-O-RING | ||
| 6V-5048 | [1] | SEAL-O-RING | ||
| 6V-5063 | [1] | SEAL-O-RING | ||
| 6V-6609 | [2] | SEAL-O-RING | ||
| 6V-8676 | [1] | SEAL-O-RING | ||
| 7L-6580 | [1] | SEAL-O-RING | ||
| 7L-9061 | [1] | SEAL-O-RING | ||
| 8C-3089 | [1] | SEAL-O-RING | ||
| 8L-2786 | [5] | SEAL-O-RING | ||
| 033-6033 | [1] | SEAL-O-RING | ||
| 114-2687 | [1] | SEAL-O-RING | ||
| 214-7566 | [2] | SEAL-O-RING | ||
| 214-7568 | [4] | SEAL-O-RING | ||
| 9X-8281 M | [4] | STUD-TAPERLOCK (M10X1.5X45-MM) | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT: | ||||
| HTTPS://DEALER.CAT.COM/RELATED | ||||
| M | METRIC PART | |||
#SEBP32260047
465-0583: KIT-ENGINE GASKET
465-0583 KIT-ENGINE GASKET -OIL COOLER, LINES
S/N 7ZR4337-UP
KIT CONTAINS GASKETS AND SEALS TO ASSEMBLE AND REINSTALL THE OIL COOLERS, OIL FILTER BASE, AND ATTACHING LINES
FIELD INSTALLATION
S/N 7ZR4337-UP
KIT CONTAINS GASKETS AND SEALS TO ASSEMBLE AND REINSTALL THE OIL COOLERS, OIL FILTER BASE, AND ATTACHING LINES
FIELD INSTALLATION
For full view, you need register
Parts for your 345B II EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 100-8525 | [1] | GASKET | ||
| 2N-5243 | [2] | SEAL-O-RING | ||
| 5P-8068 | [2] | SEAL-O-RING | ||
| 5S-9134 | [1] | SEAL-O-RING | ||
| 6V-3831 | [2] | SEAL-O-RING | ||
| 6V-4367 | [3] | SEAL-O-RING | ||
| 6V-5134 | [3] | SEAL-O-RING | ||
| 6V-9027 | [2] | SEAL-O-RING | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 8C-5230 | [1] | SEAL-O-RING | ||
| 8J-4351 | [1] | SEAL-O-RING | ||
| 9X-7549 | [2] | SEAL-O-RING | ||
| 061-7540 | [2] | SEAL-O-RING | ||
| 346-4897 | [1] | SEAL-O-RING | ||
| 117-3036 | [2] | SEAL-O-RING | ||
| 238-5080 | [1] | SEAL-O-RING | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
#SEBP32260048
20R-1431: KIT-ENGINE OVERHAUL
20R-1431 KIT-ENGINE OVERHAUL
S/N 7ZR4337-25995
(GOLD OVERHAUL KIT)
PART OF 194-6646 ENGINE AR-COMPLETE
FOR USE WITH @@@@@194-6646@@@@@, 3176C MACHINE ENGINE
S/N 7ZR4337-25995
(GOLD OVERHAUL KIT)
PART OF 194-6646 ENGINE AR-COMPLETE
FOR USE WITH @@@@@194-6646@@@@@, 3176C MACHINE ENGINE
For full view, you need register
Parts for your 345B II EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 415-8666 Y | [1] | KIT-ENGINE OVERHAUL (BRONZE) | ||
| 0R-8778 | [6] | KIT-CYLINDER PACK | ||
| (EACH INCLUDES) | ||||
| 168-7212 | [1] | RING-PISTON (TOP) | ||
| 133-7098 | [1] | CROWN AS-PISTON | ||
| 238-2710 | [1] | SKIRT-PISTON | ||
| 197-9335 | [1] | PIN AS | ||
| 0R-8188 | [1] | ROD AS-CONNECTING | ||
| 7C-8639 M | [2] | BOLT-CONNECTING ROD | ||
| 7N-2043 | [2] | DOWEL | ||
| 7W-5844 | [1] | BEARING | ||
| 4P-1659 | [1] | RING-PISTON (OIL CONTROL) | ||
| 104-3560 | [1] | SEAL-LINER | ||
| 109-5319 | [1] | RING-PISTON | ||
| 148-2125 | [1] | LINER-CYLINDER BLOCK | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT: | ||||
| HTTPS://DEALER.CAT.COM/RELATED | ||||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32260049
20R-1464: KIT-ENGINE OVERHAUL
20R-1464 KIT-ENGINE OVERHAUL
S/N 7ZR4337-25995
(PLATINUM OVERHAUL KIT)
PART OF 194-6646 ENGINE AR-COMPLETE
FOR USE WITH @@@@@194-6646@@@@@, 3176C MACHINE ENGINE
S/N 7ZR4337-25995
(PLATINUM OVERHAUL KIT)
PART OF 194-6646 ENGINE AR-COMPLETE
FOR USE WITH @@@@@194-6646@@@@@, 3176C MACHINE ENGINE
For full view, you need register
Parts for your 345B II EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 431-6548 Y | [1] | KIT-ENGINE PARTS (BRONZE) | ||
| 0R-7440 | [1] | CYLINDER HEAD GP | ||
| 148-2149 Y | [1] | CYLINDER HEAD GP | ||
| 20R-0056 | [6] | INJECTOR GP-FUEL | ||
| (EACH INCLUDES) | ||||
| 4N-9019 | [4] | DOWEL | ||
| 8T-5452 | [1] | SEAL-O-RING | ||
| 9X-7317 | [1] | SEAL-O-RING | ||
| 100-6165 | [1] | SPRING-NOZZLE | ||
| 119-8784 | [1] | SEAL-O-RING | ||
| 147-0378 | [1] | SPRING-INJECTOR | ||
| 215-3198 | [1] | SEAL-O-RING | ||
| 0R-8778 | [6] | KIT-CYLINDER PACK | ||
| (EACH INCLUDES) | ||||
| 168-7212 | [1] | RING-PISTON (TOP) | ||
| 133-7098 | [1] | CROWN AS-PISTON | ||
| 238-2710 | [1] | SKIRT-PISTON | ||
| 197-9335 | [1] | PIN AS | ||
| 0R-8188 | [1] | ROD AS-CONNECTING | ||
| 7C-8639 M | [2] | BOLT-CONNECTING ROD | ||
| 7N-2043 | [2] | DOWEL | ||
| 7W-5844 | [1] | BEARING | ||
| 4P-1659 | [1] | RING-PISTON (OIL CONTROL) | ||
| 104-3560 | [1] | SEAL-LINER | ||
| 109-5319 | [1] | RING-PISTON | ||
| 148-2125 | [1] | LINER-CYLINDER BLOCK | ||
| 10R-2296 | [1] | PUMP GP-ENGINE OIL | ||
| 6D-7146 | [1] | SEAL-O-RING | ||
| 6V-2317 M | [4] | BOLT (M8X1.25X30-MM) | ||
| 9M-1974 | [4] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 9Y-8075 | [1] | SHAFT AS-OIL PUMP (8-TEETH) | ||
| 9Y-8076 | [1] | SHAFT AS-OIL PUMP (8-TEETH) | ||
| 0R-0705 | [1] | PUMP GP-WATER | ||
| 350-5417 | [1] | SEAL-WATER PUMP | ||
| 9Y-3513 | [1] | GEAR (41-TEETH) | ||
| 176-6995 | [1] | COVER-PUMP | ||
| 105-4210 | [1] | GASKET | ||
| 147-3781 | [1] | KIT-GASKET (WATER PUMP) | ||
| 061-9455 | [1] | SEAL-O-RING | ||
| 100-8525 | [1] | GASKET | ||
| 101-1635 | [1] | GASKET | ||
| 117-3036 | [1] | SEAL-O-RING | ||
| 129-1653 | [1] | SEAL-O-RING | ||
| 6V-5504 | [1] | SEAL-O-RING | ||
| 6V-7350 | [1] | SEAL-O-RING | ||
| 7E-5555 | [1] | GASKET | ||
| 7L-6580 | [2] | SEAL-O-RING | ||
| 9X-7549 | [1] | SEAL-O-RING | ||
| 176-6997 | [1] | SHAFT | ||
| 7X-7731 | [1] | PLUG-PIPE (3/4-14-THD) | ||
| 8C-3100 | [1] | SEAL-LIP TYPE | ||
| 8T-6762 | [1] | PLUG-PIPE (1/2-14-THD) | ||
| 8T-9598 | [1] | RING-RETAINING | ||
| 9M-1974 | [6] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 176-6998 | [1] | IMPELLER-PUMP | ||
| 1B-3867 | [2] | BALL BEARING | ||
| 6V-3940 M | [6] | BOLT (M8X1.25X25-MM) | ||
| 6V-5842 M | [1] | BOLT (M10X1.5X40-MM) | ||
| 6V-9666 | [1] | WASHER-HARD (11X36X6-MM THK) | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT: | ||||
| HTTPS://DEALER.CAT.COM/RELATED | ||||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
BASIC ENGINE
FLYWHEEL GP
Reuse And Salvage Guidelines
Disassembly and Assembly
