164-1325 WINDOW GP-CAB -REAR S/N BGJ1-522 PART OF 164-1125, 164-1140, 206-9450, 206-9455 CAB GP-ENCLOSED ROPS Type 2 AN ATTACHMENT 416D

OPERATOR STATION

WINDOW GP

0. 164-1325 WINDOW GP-

DOOR GP

1. 164-1073 WINDOW GP-
2. 164-1074 WINDOW GP-

WIPER GP-WINDOW

3. 174-2024 WIPER GP-W

SERVICE EQUIPMENT AND SUPPLIES

CHARTS & FILMS

4. 186-5286 FILM GP

TOOLS

5. 113-0018 INSTALLATI

PROTECTION GP

6. 134-8204 LOCK GP-VA

CHARTS & FILMS

7. 185-7138 PLATE & FI
8. 185-7736 PLATE & FI
9. 185-7756 PLATE & FI
0. INFORMATION

BACKHOE LOADER 416D BACKHOE LOADER BGJ
416D Backhoe Loader BGJ00001-00522 (MACHINE) POWERED BY 3054 Engine SEBP3236 416D BGJ (1999)

OPERATOR STATION

WINDOW GP

164-1059 WINDOW GP-CAB

164-1060 WINDOW GP-CAB

164-1325 WINDOW GP-CAB

164-1073 WINDOW GP-DOOR

164-1074 WINDOW GP-DOOR

#SEBP32360750

164-1325: WINDOW GP-CAB

WINDOW GP-CAB

164-1325 WINDOW GP-CAB -REAR
S/N BGJ1-522
PART OF 164-1125, 164-1140, 206-9450, 206-9455 CAB GP-ENCLOSED ROPS
Type 2
AN ATTACHMENT

i01551949 SEBP3236

For full view, you need register

Parts for your 416D BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	110-5602	[2]	KNOB
2.	131-8203 M	[4]	SCREW-FLAT HEAD (M8X1.25X30-MM)
3.	140-9921	[2]	INSERT-THREADED
4.	146-7744	[1]	KIT-LATCH
5.	146-7745	[1]	KIT-LATCH
6.	150-8015	[2]	GASKET
7.	164-1308	[2]	ROLLER
8.	164-1311	[1]	LINKAGE AS
9.	164-1327	[1]	GLASS
10.	164-1328	[2]	SPRING AS-GAS
11.	164-1331	[1]	FRAME AS
12.	164-1342 M	[4]	BOLT-SPECIAL (M10X1.5X28-MM)
13.	164-1343	[4]	WASHER-THRUST (13.6X30X5.1-MM THK)
14.	164-1344	[4]	WASHER-THRUST (13.6X30X2.1-MM THK)
15.	164-1345	[4]	BEARING
16.	164-1346	[4]	STRIKER
17.	164-1347	[1]	WINDOW AS
	164-1326	[1]	GLASS
18.	164-1351	[2]	PIN
19.	164-1352	[1]	LATCH AS
20.	164-1353	[1]	LATCH AS
21.	167-8182	[2]	BUMPER
22.	171-2870	[2]	SPACER (7X10X5.4-MM THK)
23.	201-9465 BC	[4]	SHIM (1-MM THK)
24.	205-7536 C	[1]	BRACKET AS (LH)
25.	205-7538 C	[1]	BRACKET AS (RH)
26.	119-8349	[2]	CAP
27.	121-9743	[1]	SEAL
28.	129-3180 CM	[4]	LOCKNUT (M12X1.75-THD)
29.	5P-4115	[6]	WASHER-HARD (7.2X19X2-MM THK)
30.	5P-4116	[4]	WASHER-HARD (8.8X20.5X2-MM THK)
31.	8T-4138 M	[2]	BOLT (M6X1X20-MM)
32.	8T-4200 M	[4]	BOLT (M8X1.25X16-MM)
33.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
34.	9X-2044 M	[4]	SCREW-TRUSS HEAD (M6X1X16-MM)
35.	9X-2132	[4]	RETAINER
36.	164-1354 E		CHANNEL-WINDOW (86.6-CM)
37.	5P-5637 D		SEAL (0.85-M)
38.	9X-6383 E		SEAL (85-CM)
39.	164-1314 E	[2]	SEAL-BULK (148.5-CM)
40.	164-1354 E	[2]	CHANNEL-WINDOW (72.5-CM)
41.	164-1354 E	[2]	CHANNEL-WINDOW (73.8-CM)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP32360751

164-1073: WINDOW GP-DOOR

WINDOW GP-DOOR

164-1073 WINDOW GP-DOOR -RH
S/N BGJ1-522
PART OF 164-1061 DOOR GP-CAB
AN ATTACHMENT

i01380276 SEBP3236

For full view, you need register

Parts for your 416D BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8Y-7287	[2]	HINGE
2.	100-7608	[1]	HANDLE
3.	129-8542	[5]	RETAINER
4.	129-8543	[2]	SPACER (16-MM THK)
5.	129-8545	[6]	WASHER (13X40X3-MM THK)
6.	136-4192 M	[3]	BOLT (M6X1X35-MM)
7.	143-2830	[1]	LATCH AS
	6V-7743 M	[2]	LOCKNUT (M6X1-THD)
	9X-2045 M	[2]	SCREW-TRUSS HEAD (M6X1X20-MM)
	143-2827	[1]	SPRING
8.	159-4950	[1]	LATCH AS
	5C-2874 M	[1]	NUT (M5X0.8-THD)
	161-6984 M	[1]	SCREW-TRUSS HEAD (M5X0.8X20-MM)
	161-6987	[1]	WASHER-HARD (5.2X16X1.5-MM THK)
	161-9294	[1]	SPRING
	162-6556 M	[1]	LOCKNUT (M6X1-THD)
9.	164-1066	[1]	GLASS
10.	6V-7743 M	[2]	LOCKNUT (M6X1-THD)
11.	148-5353 E		SEAL (342-CM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP32360752

164-1074: WINDOW GP-DOOR

WINDOW GP-DOOR

164-1074 WINDOW GP-DOOR -LH
S/N BGJ1-522
PART OF 164-1062 DOOR GP-CAB
AN ATTACHMENT

i01374795 SEBP3236

For full view, you need register

Parts for your 416D BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8Y-7287	[2]	HINGE
2.	100-7608	[1]	HANDLE
3.	129-8542	[5]	RETAINER
4.	129-8543	[2]	SPACER (16-MM THK)
5.	129-8545	[6]	WASHER (13X40X3-MM THK)
6.	136-4192 M	[3]	BOLT (M6X1X35-MM)
7.	143-2830	[1]	LATCH AS
	6V-7743 M	[2]	LOCKNUT (M6X1-THD)
	9X-2045 M	[2]	SCREW-TRUSS HEAD (M6X1X20-MM)
	143-2827	[1]	SPRING
8.	159-4951	[1]	LATCH AS
	5C-2874 M	[1]	NUT (M5X0.8-THD)
	161-6984 M	[1]	SCREW-TRUSS HEAD (M5X0.8X20-MM)
	161-6987	[1]	WASHER-HARD (5.2X16X1.5-MM THK)
	161-9294	[1]	SPRING
	162-6556 M	[1]	LOCKNUT (M6X1-THD)
9.	164-1067	[1]	GLASS
10.	6V-7743 M	[2]	LOCKNUT (M6X1-THD)
11.	148-5353 E		SEAL (342-CM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP32360753

174-2024: WIPER GP-WINDOW

WIPER GP-WINDOW

174-2024 WIPER GP-WINDOW
S/N BGJ1-522
PART OF 184-9734, 184-9735, 205-2177, 206-9446, 206-9447, 206-9448 CAB AR-ENCLOSED ROPS
AN ATTACHMENT

i01373801 SEBP3236

For full view, you need register

Parts for your 416D BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6K-0806	[1]	STRAP-CABLE
2.	8T-4970 M	[5]	BOLT (M6X1X14-MM)
3.	101-0745	[2]	BLADE AS-WIPER (600-MM)
4.	132-2249	[2]	SPACER (7.4X12.7X24-MM THK)
5.	132-2250	[1]	SPACER (21X35X10-MM THK)
6.	154-5410	[1]	ARM-WINDOW WIPER
7.	174-2025	[1]	MOTOR GP-WINDOW WIPER (REAR)
	186-3735	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
8.	174-2026 J	[1]	ARM AS-WIPER
	194-5171 E		HOSE (33-CM)
9.	174-5456	[1]	PLATE
10.	186-2589 Y	[1]	MOTOR GP-WINDOW WIPER (FRONT)
11.	8C-8451 M	[2]	BOLT (M6X1X40-MM)
12.	8T-4205	[7]	WASHER-HARD (7.2X14.5X2-MM THK)

			AVAILABLE REPAIR KIT(S):
	163-4759 J	[1]	KIT-REPAIR (WINDOW WIPER ARM)
	E		ORDER BY THE CENTIMETER
	J		KIT MARKED J AVAILABLE FOR PART MARKED J
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP32360754

186-5286: FILM GP

FILM GP

186-5286 FILM GP
S/N BGJ1-522
FOR MACHINES WITH AUTOSHIFT
PART OF 185-7736 PLATE & FILM GP

i01477569 SEBP3236

For full view, you need register

Parts for your 416D BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	186-5265	[1]	FILM-IDENTIFICATION (416D, RH)
2.	101-0003	[8]	FASTENER
3.	3E-8123	[1]	FILM-IDENTIFICATION (CAT, RH)
4.	3E-8124	[1]	FILM-IDENTIFICATION (CAT, LH)
5.	186-5266	[1]	FILM-IDENTIFICATION (416D, LH)

#SEBP32360755

113-0018: INSTALLATION AR-WHEEL CHOCK

INSTALLATION AR-WHEEL CHOCK

113-0018 INSTALLATION AR-WHEEL CHOCK
S/N BGJ1-522
AN ATTACHMENT

i00526058 SEBP3236

1130018 INSTALLATION AR-WHEEL CHOCK Parts scheme

For full view, you need register

Parts for your 416D BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	114-9342	[2]	CHOCK GP-WHEEL
2.	130-7452	[2]	PLATE

#SEBP32360756

134-8204: LOCK GP-VANDALISM

LOCK GP-VANDALISM

134-8204 LOCK GP-VANDALISM
S/N BGJ1-522
SINGLE TILT
AN ATTACHMENT

i00511482 SEBP3236

For full view, you need register

Parts for your 416D BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5P-8502	[2]	PADLOCK GP
			(EACH INCLUDES)
	5P-8500	[1]	KEY
	8Y-6364	[1]	SLEEVE

#SEBP32360757

185-7138: PLATE & FILM GP

PLATE & FILM GP

185-7138 PLATE & FILM GP
S/N BGJ1-522
PART OF 184-7858 CHASSIS AR

i01367678 SEBP3236

For full view, you need register

Parts for your 416D BACKHOE LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
239-6989	[1]	PLATE-SERIAL NUMBER (MACHINE)
		(CONCEALED ON LOWER RH SIDE FRAME RAIL)
225-4150	[1]	PLATE-SERVICE INFORMATION (MACHINE)
		(TO LOCATE THIS PLATE SEE CHART-LOCATION)

199-6245	[1]	FILM-INFORMATION (WATER SEPARATOR)
		(ON SIDE OF FUEL TANK FROM BOTTOM EDGE 40-MM UP, OVER FROM BACK EDGE 20-MM)
101-0333	[1]	FILM-IDENTIFICATION (HYDRAULIC OIL)
		(ON BRAKE FLUID RESERVOIR CAP)
124-2456	[1]	FILM-INSTRUCTION (NO STEP)
		(ON INSIDE OF BATTERY BOX DOOR WITH BOTTOM EDGE OF DECAL 90-MM FROM TOP EDGE COVER
		& RIGHT SIDE OF DECAL IS 75-MM FROM RIGHT SIDE OF BOX)
169-4868	[2]	FILM-WARNING (NO CLEARANCE, STAY BACK)
		(ON BOOM 700-MM UP FROM CENTER LINE BOOM FOOT PIN BORE & 100-MM OVER FROM BOTTOM WRAPPER PLATE))
191-9108	[2]	FILM-WARNING (RADIATOR)
		(ON BOTH SIDES OF FRONT BAFFLE PLATE ON LH SIDE OF THE MACHINE. LOCATE 20-MM FROM BOTTOM OF
		BAFFLE PLATE & 5-MM FROM SIDE FRAME RAIL)
209-4121	[2]	FILM-WARNING (NO EXIT)
		(FOR CENTER PIVOT MACHINES, ON CAB STRUCTURE IN REAR AT THE BOTTOM 20-MM +/- 5 FROM BOTTOM
		EDGE & 190-MM +/- 5 FROM OUTER EDGE FOR EACH FILM)
		(FOR SIDESHIFT MACHINES, ONE ON EACH POST ON THE SLIDEFRAME, CENTRALISED AND 25-MM +/- 5
		DOWN FROM THE TOP HITCH PLATE)
8C-3274	[1]	FILM-IDENTIFICATION (BUCKET)
		(ON UPPER RH LOADER ARM BOSS ALIGNED WITH BUCKET INDICATOR POINTER)

#SEBP32360758

185-7736: PLATE & FILM GP

PLATE & FILM GP

185-7736 PLATE & FILM GP
S/N BGJ1-522
TWO WHEEL STEER, SINGLE TILT
PART OF 184-7858 CHASSIS AR

i01352893 SEBP3236

For full view, you need register

Parts for your 416D BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
	Y	[1]	FILM GP
	Y		SEPARATE ILLUSTRATION

#SEBP32360759

185-7756: PLATE & FILM GP

PLATE & FILM GP

185-7756 PLATE & FILM GP -FRENCH
S/N BGJ1-522
AN ATTACHMENT

i01478956 SEBP3236

For full view, you need register

Parts for your 416D BACKHOE LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
191-9093	[1]	PLATE-WARNING-ROPS/FOPS
		(ON UPPER REAR SHEET METAL PANEL ON ROPS STRUCTURE USING HOLES PROVIDED & RIVETS)
B	[2]	PLATE-WARNING (SECURE EXTENDABLE STICK)
		(ON THE LINES GP-EXTENDABLE STICK WHEN MACHINE IS EQUIPPED WITH AN EXTENDABLE STICK OPTION)

4S-8264	[2]	RIVET-POP

3E-8186	[1]	FILM-NOTICE (ENGINE STARTING)
		(CENTERED ABOVE WARNING FILM ON INSIDE OF BATTERY BOX DOOR)
101-0568	[1]	FILM-WARNING (JUMP START, READ OMM)
		(BATTERY STORAGE - ON INSIDE OF BATTERY BOX DOOR, WITH LOWER EDGE OF FILM 75-MM FROM TOP OF DOOR & RIGHT EDGE OF FILM
		260-MM FROM RIGHT EDGE OF DOOR. ORIENT FILM SUCH THAT IT CAN BE READ WHEN STANDING ON GROUND FACING BATTERY BOX)
		(BATTERY NON STORAGE - ON THE LEFT INSIDE FACE OF THE BOX WITH THE TOP EDGE OF THE FILM 45-MM FROM THE TOP EDGE OF THE
		BOX & THE RIGHT EDGE OF THE FILM 320-MM FROM THE BACK CORNER)
196-4852 B	[1]	FILM-WARNING (CONTROL PATTERN SELECT)
		(ON CONTROL GP-PILOT WHEN EQUIPPED WITH SWITCHING VALVE ON CENTER PIVOT MACHINES. ON LH B POST UP FROM B POST FLANGE
		PLATE 530-MM)
196-4866 B	[1]	FILM-WARNING (CONTROL PATTERN SELECT)
		(ON LINES GP-VALVE WHEN EQUIPPED WITH STANDARD CROSS MECHANICAL BACKHOE LOADER CONTROLS)
196-4985 B	[1]	FILM-WARNING (CONTROL PATTERN SELECT)
		(ON LINES GP-PILOT WHEN EQUIPPED WITH SWITCHING VALVE ON SIDESHIFT MACHINES. ON LH B POST UP FROM B POST FLANGE
		PLATE 530-MM)
	[1]	FILM-WARNING (LIFT ARM BRACE, PARALLEL LIFT)
		(ON LH LOADER ARM ON CYLINDER MOUNTING PLATE. 20-MM FORWARD OF THE SERVICE BRACE
		MOUNTING BRACKET & TOP EDGE PARALLEL WITH TOP OF PLATE)
133-8502	[1]	FILM-WARNING (LIFT ARM BRACE, SINGLE TILT)
		(ON LH LOADER ARM CENTERED BETWEEN CYLINDER MOUNTING PLATE & SERVICE BRACE RETAINER
		BAR WITH BOTTOM EDGE OF FILM TANGENT TO BOTTOM RADIUS OF LOADER ARM)
174-3335	[1]	FILM-WARNING (QCPLR, STG AID, READ OMM)
		(ON RH B POST IN SMOOTH AREA PROVIDED)
B		USE AS REQUIRED