POWER TRAIN
CONTROL GP-TRANSMISSION HYDDRAIN GP
DRIVE GP-FINAL
DRIVE GP
FILTER GP
POWER TRAIN
CONTROL GP-TRANSMISSION HYD
#SEBP32450370
163-5641: CONTROL GP-TRANSMISSION HYD
163-5641 CONTROL GP-TRANSMISSION HYD
S/N 6GY1-99999
PART OF 164-0234 TRANSMISSION AR
S/N 6GY1-99999
PART OF 164-0234 TRANSMISSION AR
For full view, you need register
Parts for your D8R II TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5K-5120 | [2] | STRIP | |
| 2. | 104-6729 | [1] | RETAINER | |
| 3. | 104-6730 | [1] | GASKET | |
| 4. | 109-4365 Y | [1] | VALVE GP-RELIEF (TRANSMISSION HYDRAULIC CONTROL) | |
| 5. | 110-2836 | [2] | SLEEVE | |
| 6. | 124-5332 | [1] | ELBOW | |
| 7. | 144-7871 | [1] | HARNESS AS-SENSOR (TRANSMISSION SPEED) | |
| 8. | 160-8408 Y | [5] | VALVE GP-MODULATING (TRANSMISSION CLUTCH) | |
| 9. | 167-6834 | [1] | HARNESS AS-TRANSMISSION | |
| 10. | 031-0218 | [2] | BOLT-LOCKING (3/8-16X0.5-IN) | |
| 11. | 0S-0509 | [2] | BOLT (3/8-16X0.75-IN) | |
| 12. | 0S-1594 | [2] | BOLT (3/8-16X1-IN) | |
| 13. | 0S-1619 | [4] | BOLT (3/8-16X3-IN) | |
| 14. | 0T-0065 | [3] | BOLT (3/8-16X3.5-IN) | |
| 15. | 1D-4540 | [10] | BOLT (5/16-18X2.75-IN) | |
| 16. | 2H-3932 | [2] | SEAL-O-RING | |
| 17. | 5M-2894 | [9] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 18. | 8M-4432 | [4] | SEAL-O-RING | |
| 19. | 9M-1974 | [10] | WASHER-HARD (8.8X16X2-MM THK) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32450371
207-2373: CONTROL GP-TRANSMISSION HYD
207-2373 CONTROL GP-TRANSMISSION HYD
S/N HRC1-1743
PART OF 219-2624 TRANSMISSION AR
S/N HRC1-1743
PART OF 219-2624 TRANSMISSION AR
For full view, you need register
Parts for your D8R II TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5K-5120 | [2] | STRIP | |
| 2. | 6P-4977 | [2] | SLEEVE | |
| 3. | 104-6729 | [1] | RETAINER | |
| 4. | 104-6730 | [1] | GASKET | |
| 5. | 144-7871 | [1] | HARNESS AS-SENSOR (TRANSMISSION SPEED) | |
| 3S-2093 | [1] | STRAP-CABLE | ||
| 4P-7581 | [1] | CLIP (LADDER) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2270 | [4] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS & WEDGE) | ||||
| 6. | 167-6834 | [1] | HARNESS AS-TRANSMISSION (TRANSMISSION SHIFT) | |
| 3S-2093 | [5] | STRAP-CABLE | ||
| 4P-7581 | [3] | CLIP (LADDER) | ||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 6J-2419 | [1] | SEAL-O-RING | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 7. | 204-6501 | [1] | ELBOW | |
| 8. | 205-0076 Y | [1] | VALVE GP-RELIEF (TRANSMISSION HYDRAULIC CONTROL) | |
| 9. | 205-7205 | [5] | SLEEVE | |
| 10. | 220-4324 Y | [5] | VALVE GP-MODULATING (TRANSMISSION CLUTCH) | |
| 11. | 031-0218 | [2] | BOLT-LOCKING (3/8-16X0.5-IN) | |
| 12. | 0L-1352 | [3] | BOLT (3/8-16X3.25-IN) | |
| 13. | 0S-0509 | [2] | BOLT (3/8-16X0.75-IN) | |
| 14. | 0S-1594 | [2] | BOLT (3/8-16X1-IN) | |
| 15. | 1D-4540 | [10] | BOLT (5/16-18X2.75-IN) | |
| 16. | 2H-3932 | [2] | SEAL-O-RING | |
| 17. | 5F-4899 | [4] | BOLT (3/8-16X5.5-IN) | |
| 18. | 5M-2894 | [9] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 19. | 8M-4432 | [4] | SEAL-O-RING | |
| 20. | 8M-8157 | [10] | SEAL-O-RING | |
| 21. | 9M-1974 | [10] | WASHER-HARD (8.8X16X2-MM THK) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32450372
241-8129: CONTROL GP-TRANSMISSION HYD
241-8129 CONTROL GP-TRANSMISSION HYD
S/N HRC1744-UP
PART OF 219-2624 TRANSMISSION AR
S/N HRC1744-UP
PART OF 219-2624 TRANSMISSION AR
For full view, you need register
Parts for your D8R II TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5K-5120 | [2] | STRIP | |
| 2. | 6P-4977 | [2] | SLEEVE | |
| 3. | 104-6729 | [1] | RETAINER | |
| 4. | 104-6730 | [1] | GASKET | |
| 5. | 204-6501 | [1] | ELBOW | |
| 6. | 205-0076 Y | [1] | VALVE GP-RELIEF (TRANSMISSION HYDRAULIC CONTROL) | |
| 7. | 205-4626 | [1] | HARNESS AS-SOLENOID (TRANSMISSION) | |
| 3S-2093 | [5] | STRAP-CABLE | ||
| 4P-7581 | [4] | CLIP (LADDER) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 155-2270 | [5] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 6J-2419 | [1] | SEAL-O-RING | ||
| 8T-6342 E | TUBE-HEAT SHRINK (3.2-MM DIA)(53-CM) | |||
| 186-3735 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 186-3736 | [10] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8. | 205-7205 | [5] | SLEEVE | |
| 9. | 220-4324 Y | [5] | VALVE GP-MODULATING (TRANSMISSION CLUTCH) | |
| 10. | 241-8424 | [1] | HARNESS AS-SENSOR (TRANSMISSION OUTPUT SPEED) | |
| 3S-2093 | [1] | STRAP-CABLE | ||
| 4P-7581 | [1] | CLIP (LADDER) | ||
| 186-3736 | [8] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 11. | 031-0218 | [2] | BOLT-LOCKING (3/8-16X0.5-IN) | |
| 12. | 0L-1352 | [3] | BOLT (3/8-16X3.25-IN) | |
| 13. | 0S-0509 | [2] | BOLT (3/8-16X0.75-IN) | |
| 14. | 0S-1594 | [2] | BOLT (3/8-16X1-IN) | |
| 15. | 1D-4540 | [10] | BOLT (5/16-18X2.75-IN) | |
| 16. | 2H-3932 | [2] | SEAL-O-RING | |
| 17. | 5F-4899 | [4] | BOLT (3/8-16X5.5-IN) | |
| 18. | 5M-2894 | [9] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 19. | 8M-4432 | [4] | SEAL-O-RING | |
| 20. | 8M-8157 | [10] | SEAL-O-RING | |
| 21. | 9M-1974 | [10] | WASHER-HARD (8.8X16X2-MM THK) | |
| 22. | 125-5341 | [1] | NUT (1-1/4-18-THD) | |
| 23. | 6J-2419 | [1] | SEAL-O-RING | |
| E | ORDER BY THE CENTIMETER | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32450373
106-4150: DRAIN GP-ECOLOGY
106-4150 DRAIN GP-ECOLOGY
S/N HRC1-UP; 6GY1-99999
PART OF 128-2723, 219-2628 CASE & PARTS GP-PLANETARY
S/N HRC1-UP; 6GY1-99999
PART OF 128-2723, 219-2628 CASE & PARTS GP-PLANETARY
For full view, you need register
#SEBP32450374
128-0302: DRIVE GP-FINAL
128-0302 DRIVE GP-FINAL -WASTE HANDLING
S/N AKA1-UP
PART OF 199-0818 WASTE HANDLING AR
S/N AKA1-UP
PART OF 199-0818 WASTE HANDLING AR
For full view, you need register
Parts for your D8R II TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 136-6820 | [1] | HUB AS-SUPPORT | |
| [1] | HUB-SUPPORT | |||
| 137-4489 | [1] | GUARD | ||
| 2. | 6Y-0859 | [1] | SEAL GP-DUO-CONE | |
| 2A. | 1M-9011 | [2] | RING-TORIC | |
| 3. | 6V-0663 | [1] | CONE-BEARING | |
| 4. | 6V-0662 | [1] | CUP-BEARING | |
| 5. | 6V-0664 | [1] | CONE-BEARING | |
| 6. | 5F-2465 | [1] | CUP-BEARING | |
| 7. | 5K-8454 | [15] | BOLT (1/2-13X1.12-IN) | |
| 8. | 8E-7533 | [4] | SHAFT-PLANETARY | |
| 9. | 137-4492 | [1] | HUB AS | |
| 137-4488 | [1] | GUARD | ||
| 10. | 156-5341 Y | [1] | SEGMENT GP-SPROCKET | |
| 11. | 1M-7911 | [8] | CUP-BEARING | |
| 12. | 157-5075 | [4] | GEAR-PLANETARY (21-TEETH) | |
| 13. | 1M-7912 | [8] | CONE-BEARING | |
| 14. | 9W-9393 | [1] | GEAR-RING (62-TEETH) | |
| 15. | 9W-3372 | [4] | GEAR-PLANETARY (21-TEETH) | |
| 16. | 7T-9526 | [8] | CONE-BEARING | |
| 17. | 7T-9527 | [8] | CUP-BEARING | |
| 18. | 7X-0366 | [29] | BOLT (3/4-10X2-IN) | |
| 19. | 8T-4994 | [29] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 20. | 9H-0846 | [1] | SEAL-O-RING | |
| 21. | 9W-3377 | [4] | SHAFT | |
| 22. | 3D-2895 | [4] | SEAL-QUAD RING | |
| 23. | 9W-3378 | [4] | COVER | |
| 24. | 034-3557 | [16] | BOLT-LOCKING (3/8-16X1.125-IN) | |
| 25. | 8T-4896 | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 26. | 8J-1665 | [1] | SEAL-O-RING | |
| 27. | 9W-3373 | [1] | GEAR-SUN (18-TEETH) | |
| 28. | 9W-3232 | [1] | RETAINER | |
| 29. | 9W-9394 | [1] | COVER | |
| 30. | 8T-8917 | [4] | BOLT (1/2-13X1.25-IN) | |
| 31. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 32. | 9W-9392 | [1] | CARRIER-PLANETARY | |
| 33. | 6V-3298 | [1] | PLUG-MAGNETIC (FINAL DRIVE, OIL FILL) | |
| 34. | 2S-4078 | [1] | SEAL-O-RING | |
| 35. | 9S-4185 | [1] | PLUG (3/4-16-THD)(FINAL DRIVE, OIL DRAIN) | |
| 36. | 3K-0360 | [1] | SEAL-O-RING | |
| 37. | 5F-7054 | [1] | SEAL-O-RING | |
| 38. | 6Y-1336 | [1] | CARRIER-PLANETARY | |
| 39. | 5P-8472 | [1] | RING-RETAINING | |
| 40. | 7T-2524 | [1] | GEAR-SUN (18-TEETH) | |
| 41. | 7T-2530 | [2] | RING-THRUST | |
| 42. | 7G-5832 | [1] | RETAINER | |
| 43. | 7G-5831 | [1] | RING-RETAINING | |
| 44. | 8E-7532 | [1] | HUB-REACTION | |
| 45. | 3T-5923 | [1] | RETAINER | |
| 46. | 6T-2173 | [15] | PIN | |
| 47. | 7X-4777 | [1] | SEAL-LIP TYPE | |
| 48. | 2R-0098 | [1] | SEAL-O-RING | |
| 49. | 137-4490 | [2] | RETAINER | |
| 50. | 8T-4224 | [16] | WASHER-HARD (8.8X16X2-MM THK) | |
| 51. | 8E-7534 | [4] | RETAINER | |
| 52. | 137-9810 | [2] | SEAL-PACKING | |
| 53. | 8C-6561 | [16] | BOLT (5/16-18X1.375-IN) | |
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32450375
157-5072: DRIVE GP-FINAL
157-5072 DRIVE GP-FINAL
S/N AKA1-UP
PART OF 157-5073, 159-2542 FINAL DRIVE & BRAKE GP, 157-0820 POWER TRAIN AR
FIELD REPLACEMENT ORDER @@@@@ 9W-9603@@@@@
S/N AKA1-UP
PART OF 157-5073, 159-2542 FINAL DRIVE & BRAKE GP, 157-0820 POWER TRAIN AR
FIELD REPLACEMENT ORDER @@@@@ 9W-9603@@@@@
For full view, you need register
Parts for your D8R II TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1M-7912 | [8] | CONE-BEARING | |
| 2. | 1M-7911 | [8] | CUP-BEARING | |
| 3. | 3T-5923 | [1] | RETAINER | |
| 4. | 5F-2465 | [1] | CUP-BEARING | |
| 5. | 6V-0662 | [1] | CUP-BEARING | |
| 6. | 6V-0663 | [1] | CONE-BEARING | |
| 7. | 6V-0664 | [1] | CONE-BEARING | |
| 8. | 6V-3298 | [1] | PLUG-MAGNETIC (FINAL DRIVE, OIL FILL) | |
| 9. | 6Y-0859 | [1] | SEAL GP-DUO-CONE | |
| 1M-9011 | [2] | RING-TORIC | ||
| 10. | 6Y-1336 | [1] | CARRIER-PLANETARY | |
| 11. | 7G-5831 | [1] | RING-RETAINING | |
| 12. | 7G-5832 | [1] | RETAINER | |
| 13. | 7T-2524 | [1] | GEAR-SUN (18-TEETH) | |
| 14. | 7T-2530 | [2] | RING-THRUST | |
| 15. | 7T-8001 | [1] | HUB-SPINDLE | |
| 16. | 7T-9526 | [8] | CONE-BEARING | |
| 17. | 7T-9527 | [8] | CUP-BEARING | |
| 18. | 7X-4777 | [1] | SEAL-LIP TYPE | |
| 19. | 8E-2481 | [1] | HUB-SPROCKET | |
| 20. | 8E-7532 | [1] | HUB-REACTION | |
| 21. | 8E-7533 | [4] | SHAFT-PLANETARY | |
| 22. | 8E-7534 | [4] | RETAINER | |
| 23. | 9W-3232 | [1] | RETAINER | |
| 24. | 9W-3372 | [4] | GEAR-PLANETARY (21-TEETH) | |
| 25. | 9W-3373 | [1] | GEAR-SUN (18-TEETH) | |
| 26. | 9W-3377 | [4] | SHAFT | |
| 27. | 9W-3378 | [4] | COVER | |
| 28. | 9W-9392 | [1] | CARRIER-PLANETARY | |
| 29. | 9W-9393 | [1] | GEAR-RING (62-TEETH) | |
| 30. | 9W-9394 | [1] | COVER | |
| 31. | 156-5341 Y | [1] | SEGMENT GP-SPROCKET | |
| 32. | 157-5075 | [4] | GEAR-PLANETARY (21-TEETH) | |
| 33. | 034-3557 | [16] | BOLT-LOCKING (3/8-16X1.125-IN) | |
| 34. | 2R-0098 | [1] | SEAL-O-RING | |
| 35. | 2S-4078 | [1] | SEAL-O-RING | |
| 36. | 3D-2895 | [4] | SEAL-QUAD RING | |
| 37. | 3K-0360 | [1] | SEAL-O-RING | |
| 38. | 5F-7054 | [1] | SEAL-O-RING | |
| 39. | 5K-8454 | [15] | BOLT (1/2-13X1.12-IN) | |
| 40. | 5P-8472 | [1] | RING-RETAINING | |
| 41. | 6T-2173 | [15] | PIN | |
| 42. | 7X-0366 | [29] | BOLT (3/4-10X2-IN) | |
| 43. | 8J-1665 | [1] | SEAL-O-RING | |
| 44. | 8T-4223 | [6] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 45. | 8T-4896 | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 46. | 8T-4994 | [29] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 47. | 8T-8917 | [4] | BOLT (1/2-13X1.25-IN) | |
| 48. | 8T-8919 | [2] | BOLT (1/2-13X1.75-IN) | |
| 49. | 9H-0846 | [1] | SEAL-O-RING | |
| 50. | 9S-4185 | [1] | PLUG (3/4-16-THD)(FINAL DRIVE, OIL DRAIN) | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32450376
159-7941: DRIVE GP-FINAL
For full view, you need register
Parts for your D8R II TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 137-4491 | [1] | HUB AS | |
| 137-4489 | [1] | GUARD | ||
| 2. | 6Y-0859 | [1] | SEAL GP-DUO-CONE | |
| 2A. | 1M-9011 | [2] | RING-TORIC | |
| 2B. | Z | [2] | SEAL-RING | |
| 3. | 6V-0663 | [1] | CONE-BEARING | |
| 4. | 6V-0662 | [1] | CUP-BEARING | |
| 5. | 6V-0664 | [1] | CONE-BEARING | |
| 6. | 5F-2465 | [1] | CUP-BEARING | |
| 7. | 5K-8454 | [15] | BOLT (1/2-13X1.12-IN) | |
| 8. | 157-5075 | [4] | GEAR-PLANETARY (21-TEETH) | |
| 9. | 137-4492 | [1] | HUB AS | |
| 137-4488 | [1] | GUARD | ||
| 10. | 156-5341 Y | [1] | SEGMENT GP-SPROCKET | |
| 11. | 1M-7911 | [8] | CUP-BEARING | |
| 12. | 8E-7534 | [4] | RETAINER | |
| 13. | 8E-7533 | [4] | SHAFT-PLANETARY | |
| 14. | 9W-9393 | [1] | GEAR-RING (62-TEETH) | |
| 15. | 9W-3372 | [4] | GEAR-PLANETARY (21-TEETH) | |
| 16. | 7T-9526 | [8] | CONE-BEARING | |
| 17. | 7T-9527 | [8] | CUP-BEARING | |
| 18. | 7X-0366 | [29] | BOLT (3/4-10X2-IN) | |
| 19. | 8T-4994 | [29] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 20. | 9H-0846 | [1] | SEAL-O-RING | |
| 21. | 9W-3377 | [4] | SHAFT | |
| 22. | 3D-2895 | [4] | SEAL-QUAD RING | |
| 23. | 9W-3378 | [4] | COVER | |
| 24. | 034-3557 | [16] | BOLT-LOCKING (3/8-16X1.125-IN) | |
| 25. | 8T-4896 | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 26. | 8J-1665 | [1] | SEAL-O-RING | |
| 27. | 9W-3373 | [1] | GEAR-SUN (18-TEETH) | |
| 28. | 9W-3232 | [1] | RETAINER | |
| 29. | 9W-9394 | [1] | COVER | |
| 30. | 8T-8917 | [4] | BOLT (1/2-13X1.25-IN) | |
| 31. | 8T-4223 | [6] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 32. | 9W-9392 | [1] | CARRIER-PLANETARY | |
| 33. | 6V-3298 | [1] | PLUG-MAGNETIC (FINAL DRIVE, OIL FILL) | |
| 34. | 2S-4078 | [1] | SEAL-O-RING | |
| 35. | 9S-4185 | [1] | PLUG (3/4-16-THD)(FINAL DRIVE, OIL DRAIN) | |
| 36. | 3K-0360 | [1] | SEAL-O-RING | |
| 37. | 5F-7054 | [1] | SEAL-O-RING | |
| 38. | 8E-7532 | [1] | HUB-REACTION | |
| 39. | 5P-8472 | [1] | RING-RETAINING | |
| 40. | 7T-2524 | [1] | GEAR-SUN (18-TEETH) | |
| 41. | 7T-2530 | [2] | RING-THRUST | |
| 42. | 7G-5832 | [1] | RETAINER | |
| 43. | 7G-5831 | [1] | RING-RETAINING | |
| 44. | 6Y-1336 | [1] | CARRIER-PLANETARY | |
| 45. | 3T-5923 | [1] | RETAINER | |
| 46. | 6T-2173 | [15] | PIN | |
| 47. | 7X-4777 | [1] | SEAL-LIP TYPE | |
| 48. | 2R-0098 | [1] | SEAL-O-RING | |
| 49. | 8T-4224 | [16] | WASHER-HARD (8.8X16X2-MM THK) | |
| 50. | 1M-7912 | [8] | CONE-BEARING | |
| 51. | 137-9810 | [2] | SEAL-PACKING | |
| 52. | 137-4490 | [2] | RETAINER | |
| 53. | 8C-6561 | [16] | BOLT (5/16-18X1.375-IN) | |
| 54. | 8T-8919 | [2] | BOLT (1/2-13X1.75-IN) | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
| Z | NOT SERVICED SEPARATELY | |||
#SEBP32450377
9W-9603: DRIVE GP-FINAL
For full view, you need register
Parts for your D8R II TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7T-8001 | [1] | HUB-SPINDLE | |
| 2. | 6Y-0859 | [1] | SEAL GP-DUO-CONE | |
| 1M-9011 | [2] | RING-TORIC | ||
| 3. | 6V-0663 | [1] | CONE-BEARING | |
| 4. | 6V-0662 | [1] | CUP-BEARING | |
| 5. | 6V-0664 | [1] | CONE-BEARING | |
| 6. | 5F-2465 | [1] | CUP-BEARING | |
| 7. | 5K-8454 | [15] | BOLT (1/2-13X1.12-IN) | |
| 8. | 8E-7533 | [4] | SHAFT-PLANETARY | |
| 9. | 8E-2481 | [1] | HUB-SPROCKET | |
| 10. | 1M-7911 | [4] | CUP-BEARING | |
| 11. | 157-5075 | [4] | GEAR-PLANETARY (21-TEETH) | |
| 12. | 1M-7912 | [8] | CONE-BEARING | |
| 13. | 9W-9393 | [1] | GEAR-RING (62-TEETH) | |
| 14. | 9W-3372 | [4] | GEAR-PLANETARY (21-TEETH) | |
| 15. | 7T-9526 | [8] | CONE-BEARING | |
| 16. | 7T-9527 | [8] | CUP-BEARING | |
| 17. | 7X-0366 | [29] | BOLT (3/4-10X2-IN) | |
| 18. | 8T-4994 | [29] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 19. | 9H-0846 | [1] | SEAL-O-RING | |
| 20. | 9W-3377 | [4] | SHAFT | |
| 21. | 3D-2895 | [4] | SEAL-QUAD RING | |
| 22. | 9W-3378 | [4] | COVER | |
| 23. | 034-3557 | [16] | BOLT-LOCKING (3/8-16X1.125-IN) | |
| 24. | 8T-4896 | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 25. | 8J-1665 | [1] | SEAL-O-RING | |
| 26. | 9W-3373 | [1] | GEAR-SUN (18-TEETH) | |
| 27. | 9W-3232 | [1] | RETAINER | |
| 28. | 9W-9394 | [1] | COVER | |
| 29. | 8T-8917 | [4] | BOLT (1/2-13X1.25-IN) | |
| 30. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 31. | 9W-9392 | [1] | CARRIER-PLANETARY | |
| 32. | 6V-3298 | [1] | PLUG-MAGNETIC (FINAL DRIVE, OIL FILL) | |
| 33. | 2S-4078 | [1] | SEAL-O-RING | |
| 34. | 9S-4185 | [1] | PLUG (3/4-16-THD)(FINAL DRIVE, OIL DRAIN) | |
| 35. | 3K-0360 | [1] | SEAL-O-RING | |
| 36. | 5F-7054 | [1] | SEAL-O-RING | |
| 37. | 6Y-1336 | [1] | CARRIER-PLANETARY | |
| 38. | 5P-8472 | [1] | RING-RETAINING | |
| 39. | 7T-2524 | [1] | GEAR-SUN (18-TEETH) | |
| 40. | 7T-2530 | [2] | RING-THRUST | |
| 41. | 7G-5832 | [1] | RETAINER | |
| 42. | 7G-5831 | [1] | RING-RETAINING | |
| 43. | 8E-7532 | [1] | HUB-REACTION | |
| 44. | 3T-5923 | [1] | RETAINER | |
| 45. | 6T-2173 | [15] | PIN | |
| 46. | 7X-4777 | [1] | SEAL-LIP TYPE | |
| 47. | 2R-0098 | [1] | SEAL-O-RING | |
| 48. | 8E-7534 | [4] | RETAINER | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP32450378
6I-3638: DRIVE GP-PUMP
6I-3638 DRIVE GP-PUMP
S/N BET1-UP
LEFT HAND REARWARD FACING SAE 2 BOLT FLANGE WITH SPLINE DRIVE
PART OF 160-0566, 235-3453 ENGINE AR-CORE
FOR USE WITH THE 2.5 BASE MODULE LARGE CAM GEAR TRAIN, CUSTOMER SUPPLIED SAE "A" PUMP WITH 11 TOOTH, 16/32 DEPTH SPLINE
S/N BET1-UP
LEFT HAND REARWARD FACING SAE 2 BOLT FLANGE WITH SPLINE DRIVE
PART OF 160-0566, 235-3453 ENGINE AR-CORE
FOR USE WITH THE 2.5 BASE MODULE LARGE CAM GEAR TRAIN, CUSTOMER SUPPLIED SAE "A" PUMP WITH 11 TOOTH, 16/32 DEPTH SPLINE
For full view, you need register
#SEBP32450379
178-0568: FILTER GP-OIL
178-0568 FILTER GP-OIL -TRANSMISSION CHARGING
S/N AKA1-UP
PART OF 156-2542 LINES GP-POWER TRAIN OIL
S/N AKA1-UP
PART OF 156-2542 LINES GP-POWER TRAIN OIL
For full view, you need register
Parts for your D8R II TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3J-1907 | [1] | SEAL-O-RING | |
| 2. | 3S-8652 | [1] | SPRING | |
| 3. | 5P-3620 | [1] | SEAL-O-RING | |
| 4. | 6T-9222 | [1] | SPOOL | |
| 6. | 132-8876 | [1] | FILTER ELEMENT AS-OIL (ULTRA HIGH EFFICIENCY) | |
| -OR- | ||||
| 4T-3132 | [1] | FILTER ELEMENT AS-OIL (FIRE RESISTANT FLUID) | ||
| 7. | 133-1279 | [1] | HOUSING AS-OIL FILTER | |
| 8. | 133-2199 | [1] | SPRING | |
| 9. | 165-8079 | [1] | RETAINER | |
| 11. | 231-9483 | [1] | BASE-FILTER | |
| 12. | 8M-6393 | [1] | RING-RETAINING | |
| 13. | 9S-4191 | [1] | PLUG (9/16-18-THD)(DRAIN) | |
