OPERATOR STATION
AIR CONDITIONER GPBLOWER GP-CAB
CAB GP
OPERATOR STATION
AIR CONDITIONER GP
#SEBP32460790
108-0720: AIR CONDITIONER GP
108-0720 AIR CONDITIONER GP
S/N ALH1-UP; ALR1-UP
PART OF 167-1458 AIR CONDITIONER GP
S/N ALH1-UP; ALR1-UP
PART OF 167-1458 AIR CONDITIONER GP
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6K-9555 | [1] | GROMMET (7.9MM OD) | |
| -OR- | ||||
| 2V-1937 | [1] | GROMMET (14.3MM OD) | ||
| 2. | 5P-5643 BD | SEAL | ||
| 3. | 109-6406 | [1] | COIL AS | |
| 4. | 3E-5464 | [1] | SWITCH AS-THERMOSTAT (HVAC)(A/C) | |
| 5. | 6L-7159 | [2] | SCREW-MACHINE (8-32X0.313-IN) | |
| 6. | 8T-4191 M | [2] | BOLT (M10X1.5X16-MM) | |
| 7. | 2V-1937 | [1] | GROMMET | |
| 8. | 5P-1075 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 9. | 1V-3113 B | [1] | CLIP | |
| 10. | 2A-3211 B | [1] | WASHER (5.5X12.3X0.8-MM THK) | |
| 11. | 7S-4346 B | [1] | SCREW-MACHINE (10-32X0.5-IN) | |
| 12. | 5P-5992 D | HOSE (.1M) | ||
| 13. | 110-6109 A | [1] | KNOB-CONTROL (A/C) | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
#SEBP32460791
167-1458: AIR CONDITIONER GP
167-1458 AIR CONDITIONER GP
S/N ALH1-389; ALR1-366
PART OF 217-3818 CAB GP-ENCLOSED ROPS
S/N ALH1-389; ALR1-366
PART OF 217-3818 CAB GP-ENCLOSED ROPS
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP32460792
167-1458: AIR CONDITIONER GP
167-1458 AIR CONDITIONER GP
S/N ALH390-UP; ALR367-UP
PART OF 217-3818, 253-2422 CAB GP-ENCLOSED ROPS
S/N ALH390-UP; ALR367-UP
PART OF 217-3818, 253-2422 CAB GP-ENCLOSED ROPS
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 245-4413 CY | [1] | CONDENSER GP-REFRIGERANT | |
| 2. | 171-9593 Y | [1] | LINES GP-AIR CONDITIONER (COMPRESSOR) | |
| 3. | 108-0720 Y | [1] | AIR CONDITIONER GP | |
| 4. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 5. | 8T-4195 CM | [4] | BOLT (M10X1.5X30-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32460793
198-7281: BLOWER GP-CAB
198-7281 BLOWER GP-CAB
S/N ALH1-UP; ALR1-UP
PART OF 163-0152 PRESSURIZER GP-CAB
ALSO AN ATTACHMENT
S/N ALH1-UP; ALR1-UP
PART OF 163-0152 PRESSURIZER GP-CAB
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1M-1230 | [4] | NUT-LOCKING (10-32-THD) | |
| 2. | 3S-2093 | [1] | STRAP-CABLE | |
| 3. | 6T-6708 | [2] | WASHER (7X28.6X4.1-MM THK) | |
| 4. | 7G-0942 | [2] | PLATE-ORIFICE | |
| 5. | 9G-1950 | [1] | RESISTOR | |
| 6. | 111-7198 | [1] | HARNESS AS-MOTOR (BLOWER) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 7. | 256-0622 | [1] | WHEEL-BLOWER (CCW) | |
| 8. | 256-0623 | [1] | WHEEL-BLOWER (CW) | |
| 9. | 174-1504 | [1] | MOTOR AS-BLOWER (24-VOLT, A/C, HEATER) | |
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 10. | 174-1505 | [1] | MOTOR AS-BLOWER (24-VOLT, A/C, HEATER) | |
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 11. | 175-0070 | [4] | BRACKET | |
| 12. | 198-7282 | [1] | PLATE AS | |
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 4K-9230 | [1] | NUT-WELD (10-32-THD) | ||
| 13. | 198-7284 | [1] | GASKET | |
| 14. | 3E-9865 | [7] | LOCKNUT (1/4-20-THD) | |
| 15. | 4B-4274 | [4] | WASHER (5.5X13X1.2-MM THK) | |
| 16. | 5P-4115 | [6] | WASHER-HARD (7.2X19X2-MM THK) | |
| 17. | 5P-8167 | [1] | BOLT (3/8-16X0.625-IN) | |
| 18. | 266-6606 | [1] | GROMMET | |
| 19. | 5P-9085 | [1] | CLIP (LOOP) | |
| 20. | 130-5300 | [2] | CLIP | |
| 21. | 6V-1668 | [2] | WASHER (6.5X29.1X3-MM THK) | |
| 22. | 6V-3320 | [1] | SCREW-MACHINE (1/4-20X7.5-IN) | |
| 23. | 8T-4896 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 24. | 8C-3756 | [1] | FILM-IDENTIFICATION (AIR CONDITIONER) | |
#SEBP32460794
156-9516: CAB AR
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 217-3818 Y | [1] | CAB GP-ENCLOSED ROPS | ||
| S/N ALH1-734; ALR1-634 | ||||
| 253-2422 Y | [1] | CAB GP-ENCLOSED ROPS | ||
| S/N ALH735-UP; ALR635-UP | ||||
| 177-3860 Y | [1] | COVER GP-CONSOLE | ||
| S/N ALH1-734; ALR1-634 | ||||
| 237-2820 Y | [1] | COVER GP-CONSOLE | ||
| S/N ALH735-UP; ALR635-UP | ||||
| 202-1871 Y | [1] | COVER GP-CONSOLE | ||
| 222-3800 Y | [1] | LINES GP-HEATER | ||
| 204-6414 Y | [1] | INSTALLATION GP-LINES (AIR CONDITIONER) | ||
| 156-8915 Y | [1] | MOUNTING GP-CAB | ||
| 167-1457 Y | [1] | ROPS GP-ENCLOSED | ||
| 167-1455 Y | [1] | TANK GP-WINDOW WASHER | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| S/N ALH735-757; ALR635-666 | ||||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 8T-8737 | [8] | PLUG-SEAL | ||
| S/N ALH735-757; ALR635-666 | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32460795
218-3069: CAB AR
218-3069 CAB AR
S/N ALH1-UP; ALR1-UP
FOR USE WITH ENGINE AR WITHOUT AIR CONDITIONING
CANNOT BE USED WITH CANOPY AR
AN ATTACHMENT
S/N ALH1-UP; ALR1-UP
FOR USE WITH ENGINE AR WITHOUT AIR CONDITIONING
CANNOT BE USED WITH CANOPY AR
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP32460796
230-2115: CAB AR
230-2115 CAB AR -PILOT CONTROL
S/N ALH1-734; ALR1-634
PART OF 235-8344 HYDRAULIC AR-3 VALVE
AN ATTACHMENT
S/N ALH1-734; ALR1-634
PART OF 235-8344 HYDRAULIC AR-3 VALVE
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP32460797
220-3621: CAB GP
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| Y | [1] | CAB GP-ENCLOSED ROPS | ||
| 156-8955 Y | [1] | CONTROL GP-STEERING & XMSN | ||
| 156-8951 Y | [1] | PANEL GP-INSTRUMENT | ||
| 217-3815 Y | [1] | PANEL GP-INSULATION (SOUND) | ||
| 199-4801 Y | [1] | PEDAL GP-GOVERNOR & BRAKE | ||
| 156-7378 Y | [1] | WIRING GP-PLATFORM | ||
| S/N ALH1-389; ALR1-366 | ||||
| 237-4491 Y | [1] | WIRING GP-PLATFORM | ||
| S/N ALH390-734; ALR367-634 | ||||
| 220-0229 | [1] | ALARM AS (BACKUP) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 5P-5623 BD | WIRE-ELECTRICAL (16-GA, BLACK) | |||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 E | SLEEVE (31-CM) | |||
| 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | ||
| 179-6714 | [1] | PLUG AS-CODE (MONITOR) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 125-7874 BE | TUBE-HEAT SHRINK (5.72-MM DIA) | |||
| 111-7003 | [1] | PLUG AS-CODE (POWER TRAIN) | ||
| S/N ALH1-389; ALR1-366 | ||||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 240-9420 | [1] | PLUG AS-CODE (POWER TRAIN) | ||
| S/N ALH390-734; ALR367-634 | ||||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 119-3662 BE | TUBE-HEAT SHRINK (10.85-MM DIA) | |||
| 6V-4360 | [3] | PLUG-BUTTON | ||
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32460798
253-2428: CAB GP
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| Y | [1] | CAB GP-ENCLOSED ROPS | ||
| 156-8955 Y | [1] | CONTROL GP-STEERING & XMSN | ||
| 156-8951 Y | [1] | PANEL GP-INSTRUMENT | ||
| 217-3815 Y | [1] | PANEL GP-INSULATION (SOUND) | ||
| 248-0770 Y | [1] | PEDAL GP-GOVERNOR & BRAKE | ||
| 237-4485 Y | [1] | WIRING GP-PLATFORM | ||
| 220-0229 | [1] | ALARM AS (BACKUP) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 5P-5623 BD | WIRE-ELECTRICAL (16-GA, BLACK) | |||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 E | SLEEVE (31-CM) | |||
| 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | ||
| 179-6714 | [1] | PLUG AS-CODE (MONITOR) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 125-7874 BE | TUBE-HEAT SHRINK (5.72-MM DIA) | |||
| 240-9420 | [1] | PLUG AS-CODE (POWER TRAIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 119-3662 BE | TUBE-HEAT SHRINK (10.85-MM DIA) | |||
| 6V-4360 | [3] | PLUG-BUTTON | ||
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32460799
156-8911: CAB GP-ENCLOSED ROPS
156-8911 CAB GP-ENCLOSED ROPS
S/N ALH1-389; ALR1-366
PART OF 220-3621 CAB GP, 217-3818 CAB GP-ENCLOSED ROPS
Type 1
ALSO AN ATTACHMENT
S/N ALH1-389; ALR1-366
PART OF 220-3621 CAB GP, 217-3818 CAB GP-ENCLOSED ROPS
Type 1
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-8928 | [1] | HOOK-COAT | |
| 2. | 7K-1181 | [26] | STRAP-CABLE | |
| 3. | 8C-5607 | [8] | MOUNT-ISOLATION | |
| 4. | 8C-5608 | [4] | SPACER (6.5X9.5X25.4-MM THK) | |
| 5. | 109-1645 | [1] | CLIP | |
| 6. | 123-6449 | [1] | ALARM GP (CAB) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 5P-5677 BD | WIRE (18-GA, BLACK) | |||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 BE | SLEEVE | |||
| 7. | 132-5792 M | [4] | INSERT-THREADED (M4X0.7-THD) | |
| 8. | Y | [1] | WINDOW GP-CAB | |
| 9. | [1] | HARNESS AS-CAB (MAIN) | ||
| 102-8802 | [5] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [25] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [6] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [3] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 10. | 161-7000 | [1] | CAB AS | |
| 6V-9632 M | [6] | NUT-WELD (M6X1-THD) | ||
| 10A. | 9B-2923 | [2] | HINGE | |
| 10B. | [1] | HANDLE (RH) | ||
| 10C. | 178-9009 | [1] | HANDLE (LH) | |
| 10D. | 189-9021 | [1] | PLATE | |
| 11. | 163-0152 Y | [1] | PRESSURIZER GP-CAB | |
| 12. | 164-9136 | [1] | GUARD AS | |
| 13. | 167-1451 Y | [1] | DOOR GP-CAB (RH) | |
| 14. | 167-1453 Y | [1] | DOOR GP-CAB (LH) | |
| 15. | 168-8929 | [2] | STRIKER AS | |
| (EACH INCLUDES) | ||||
| 8T-4244 M | [1] | NUT (M12X1.75-THD) | ||
| 129-3737 M | [1] | STRIKER BOLT-CAB (M12X1.75X17.8-MM) | ||
| 16. | 170-2062 | [1] | GRID | |
| 17. | 170-2084 Y | [1] | LINER GP-CAB | |
| 18. | 170-2086 Y | [1] | WIPER GP-WINDOW | |
| 19. | 175-6956 Y | [1] | COVER GP-CONSOLE | |
| 20. | 175-7654 Y | [1] | HEATER GP-CAB | |
| 21. | 176-7456 | [1] | HARNESS AS-WINDOW WIPER (LH) | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 22. | 177-3851 Y | [1] | INSULATION GP-WEATHER | |
| 23. | 177-3852 Y | [1] | STEP GP | |
| 24. | 178-8375 | [2] | PLATE | |
| 25. | 178-9018 Y | [1] | INDICATOR GP-AIR FILTER CHANGE | |
| 26. | 194-3315 Y | [1] | LATCH GP | |
| 27. | 194-3333 Y | [1] | INSTALLATION GP-RADIO | |
| 28. | 196-7553 | [1] | HANDLE AS | |
| 29. | 211-0238 | [1] | FILM-IDENTIFICATION (LUBE POINT) | |
| 30. | 224-2470 | [1] | PLATE | |
| 31. | 224-2669 | [8] | PLUG-PLASTIC | |
| 32. | 2V-8259 | [2] | GROMMET | |
| 33. | 4H-2558 | [3] | GROMMET | |
| 34. | 5P-4116 | [4] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 35. | 5P-8439 | [1] | GROMMET | |
| 36. | 6V-6716 | [2] | RIVET-TRUSS HEAD | |
| 37. | 6V-7357 M | [1] | BOLT (M6X1X25-MM) | |
| 38. | 7X-7729 | [21] | WASHER (11X25X3-MM THK) | |
| 39. | 8C-8451 M | [4] | BOLT (M6X1X40-MM) | |
| 40. | 8E-8706 Y | [1] | MIRROR GP-REAR VIEW | |
| 41. | 8K-1433 | [1] | GROMMET | |
| 42. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 43. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 44. | 8T-4137 M | [7] | BOLT (M10X1.5X20-MM) | |
| 45. | 8T-4189 M | [4] | BOLT (M8X1.25X20-MM) | |
| 46. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 47. | 8T-4198 M | [2] | BOLT (M10X1.5X100-MM) | |
| 48. | 9X-2040 M | [4] | SCREW-TRUSS HEAD (M10X1.5X25-MM) | |
| 49. | 9X-6165 | [4] | WASHER (6.5X22X2.5-MM THK) | |
| 50. | 5P-5952 BD | SEAL | ||
| 51. | 172-1681 BE | SEAL | ||
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
