227-0842 CYLINDER GP-RIPPER -LIFT S/N 7SP1-UP 127-MM (5-IN) BORE X 362-MM (14.25-IN) STROKE PART OF 180-4560 RIPPER AR AN ATTACHMENT D6N

HYDRAULIC SYSTEM

CYLINDER GP

0. 227-0842 CYLINDER G
1. 9T-2716 CYLINDER G
2. 115-3523 CYLINDER G
3. 160-0054 CYLINDER G

FILTER GP

4. 169-4019 FILTER GP-
5. 212-9363 FILTER GP-

HYDRAULIC GP

6. 235-8345 HYDRAULIC
7. 230-6111 HYDRAULIC
8. 254-6940 HYDRAULIC
9. 189-4623 HYDRAULIC
0. INFORMATION

TRACK-TYPE TRACTOR D6N TRACK-TYPE TRACTOR AKM
D6N XL, D/S, LGP TRACK-TYPE TRACTOR AKM00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3247 D6N AKM (2001)

HYDRAULIC SYSTEM

CYLINDER GP

192-2811 CYLINDER GP-BULLDOZER LIFT

1U-1839 CYLINDER GP-BULLDOZER LIFT

227-0842 CYLINDER GP-RIPPER

9T-2716 CYLINDER GP-RIPPER

115-3523 CYLINDER GP-TILT

160-0054 CYLINDER GP-TILT

#SEBP32470710

227-0842: CYLINDER GP-RIPPER

CYLINDER GP-RIPPER

227-0842 CYLINDER GP-RIPPER -LIFT
S/N 7SP1-UP
127-MM (5-IN) BORE X 362-MM (14.25-IN) STROKE
PART OF 180-4560 RIPPER AR
AN ATTACHMENT

i02422773 SEBP3247

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	230-4873	[1]	CYLINDER AS
1A.	4K-3128	[2]	BUSHING
2.	2J-0564	[1]	LOCKNUT (2-12-THD)
3.	3G-1753	[1]	PISTON
4.	4J-3420 J	[1]	RING-WEAR
5.	9X-7264 J	[1]	SEAL AS
6.	3G-1757	[1]	WASHER (50.95X82X12-MM THK)
7.	2K-4096 J	[1]	RING-BACKUP
8.	310-2189	[1]	SEAL-O-RING
9.	230-4872	[1]	HEAD
10.	9T-2714	[1]	ROD AS
10A.	2K-4507	[1]	BUSHING
11.	8T-5668 J	[1]	RING-WEAR
12.	289-2937 J	[1]	SEAL AS-BUFFER
13.	289-2948 J	[1]	SEAL-U-CUP
14.	225-3281 J	[1]	SEAL-WIPER
15.	6V-8237	[4]	WASHER (26X44X4-MM THK)
16.	173-9779 M	[4]	BOLT (M24X3X80-MM)
17.	1P-4576	[4]	FLANGE-HALF
18.	8T-4186 M	[8]	BOLT (M10X1.5X40-MM)
19.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)

			AVAILABLE REPAIR KIT(S):
	242-2542 J	[1]	KIT-SEAL (HYDRAULIC CYLINDER)
			(INCLUDES RINGS & SEALS)
			(FOR USE WITH REHS1392)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

#SEBP32470711

9T-2716: CYLINDER GP-RIPPER

CYLINDER GP-RIPPER

9T-2716 CYLINDER GP-RIPPER -LIFT
S/N 7SP1-UP
127-MM (5-IN) BORE X 362-MM (14.25-IN) STROKE
PART OF 180-4560 RIPPER AR
AN ATTACHMENT

i00433106 SEBP3247

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3G-1753	[1]	PISTON
2.	4J-3420	[1]	RING-WEAR
3.	5J-5020	[1]	SEAL AS
	5J-4973	[1]	RING-EXPANDER
	5J-4974	[1]	SEAL
4.	9T-2715	[1]	CYLINDER AS
4A.	4K-3128	[2]	BUSHING
5.	5P-8249	[4]	WASHER-HARD (24X41.5X4-MM THK)
6.	9T-6863 C	[1]	HEAD
7.	167-2201 C	[1]	SEAL AS-BUFFER
8.	167-2312 C	[1]	SEAL-U-CUP
9.	225-3281 C	[1]	SEAL-WIPER
10.	9T-2714	[1]	ROD AS
11.	2K-4507	[1]	BUSHING
12.	1D-4628	[4]	BOLT (7/8-9X3.25-IN)
13.	2K-4096	[1]	RING-BACKUP
14.	310-2189	[1]	SEAL-O-RING
15.	3G-1757	[1]	WASHER (50.95X82X12-MM THK)
16.	2J-0564	[1]	LOCKNUT (2-12-THD)
17.	8T-5668 C	[1]	RING-WEAR
18.	1P-4576	[4]	FLANGE-HALF
19.	4J-5267	[2]	SEAL-O-RING
20.	5H-4018	[2]	COVER
21.	9B-7237	[8]	BOLT (3/8-16X1.25-IN)
22.	8T-4896	[8]	WASHER-HARD (10.2X18.5X2.5-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP32470712

115-3523: CYLINDER GP-TILT

CYLINDER GP-TILT

115-3523 CYLINDER GP-TILT -SEMI-UNIVERSAL BULLDOZER
S/N B6A1-UP; B6D1-UP; S6D1-UP; AKM1-UP; S6S1-UP
165.1MM (6.5 IN) BORE X 128MM (5 IN) STROKE
PART OF 115-4472, 5Q-8011 PUSH ARM GP
AN ATTACHMENT

i00492056 SEBP3247

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	116-3089	[1]	CYLINDER AS
1A.	2J-8489	[1]	BEARING
2.	173-9682 M	[1]	BOLT (M36X4X100-MM)
3.	3S-6162	[1]	WASHER-HARD (40.5X67X6-MM THK)
4.	3J-9703 J	[1]	RING-WEAR
5.	4T-8695 J	[1]	SEAL AS
6.	116-3085	[1]	PISTON
7.	116-3083	[1]	HEAD
8.	116-3084	[1]	ROD AS
9.	8J-2880	[1]	CAP AS-BEARING
10.	6V-9167 M	[4]	BOLT (M20X2.5X140-MM)
11.	8E-5703 B	[28]	SHIM (0.8-MM THK)
12.	6V-7742 M	[4]	NUT-FULL (M20X2.5-THD)
13.	7J-8955 J	[1]	RING-BACKUP
14.	7J-8956 J	[1]	SEAL-O-RING
15.	6V-8133 M	[4]	BOLT (M24X3X80-MM)
16.	6V-8237	[4]	WASHER (26X44X4-MM THK)
17.	312-4247 J	[1]	SEAL-WIPER
18.	421-4025 J	[1]	SEAL-U-CUP
19.	312-4248 J	[1]	SEAL AS-BUFFER
20.	9T-0094 J	[1]	RING-WEAR

			AVAILABLE REPAIR KIT(S):
	393-3607 J	[1]	KIT-HYD CYLINDER SEAL
	B		USE AS REQUIRED
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

#SEBP32470713

160-0054: CYLINDER GP-TILT

CYLINDER GP-TILT

160-0054 CYLINDER GP-TILT -BULLDOZER
S/N B6C1-UP; B6F1-UP; G6G1-UP; B6L1-UP; DPM1-UP; G6M1-UP; F6W1-99999; B6X1-UP; B6Y1-UP; F6Y1-99999
139.7-MM (5.5-IN) BORE X 114-MM (4.5-IN) STROKE
PART OF 225-8291 BULLDOZER AR-ANGLING, 223-6303, 223-6304, 225-8288, 225-8289, 225-8292, 262-9871, 262-9872, 262-9873, 267-2837 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT

i01034865 SEBP3247

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	160-0055	[1]	CYLINDER AS
1A.	8T-7567	[1]	RING-RETAINING (INTERNAL)
1B.	160-0305	[1]	BEARING
1C.	9T-7045	[2]	ELBOW
2.	3J-9545	[1]	LOCKNUT (2-12-THD)
3.	1U-4049	[1]	WASHER (51X73X12.7-MM THK)
4.	160-0060	[1]	PISTON
5.	6E-0465	[1]	SEAL AS
6.	4J-4606	[1]	RING-WEAR
7.	2H-9247	[1]	SEAL-O-RING
8.	2K-2961	[1]	RING-BACKUP
9.	329-5398	[1]	CROWN
10.	110-4771	[1]	HEAD
11.	204-9542	[1]	ROD AS
11A.	1S-3311	[1]	RING-RETAINING
11B.	7J-1309	[1]	BEARING
12.	225-3281	[1]	SEAL-WIPER
13.	167-2312	[1]	SEAL-U-CUP
14.	167-2201	[1]	SEAL AS-BUFFER
15.	8T-5668	[1]	RING-WEAR

#SEBP32470714

169-4019: FILTER GP-OIL

FILTER GP-OIL

169-4019 FILTER GP-OIL -CASE DRAIN
S/N AKM1-UP; ALY1-UP
PART OF 191-9531, 230-8749, 268-1133 LINES GP-PUMP
ALSO AN ATTACHMENT

i01434594 SEBP3247

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9T-8578	[1]	FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC)
			-OR-
	144-0832 A	[1]	FILTER-OIL (ULTRA HIGH EFFICIENCY)(HYDRAULIC)
	A		NOT PART OF THIS GROUP

#SEBP32470715

212-9363: FILTER GP-OIL

FILTER GP-OIL

212-9363 FILTER GP-OIL -STEERING
S/N AKM1794-UP; ALY2066-UP
PART OF 261-4708 LINES GP-STEERING

i02466027 SEBP3247

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1G-8878	[1]	FILTER-OIL (ADVANCED EFFICIENCY)
			-OR-
	102-2828	[1]	FILTER-OIL (ULTRA HIGH EFFICIENCY)
			-OR-
	156-0214	[1]	FILTER-OIL (FIRE RESISTANT FLUID)
2.	8C-3446	[1]	VALVE-SAMPLING (HYDRAULIC OIL FILTER)
3.	8C-3451	[1]	CAP-DUST (HYDRAULIC OIL)
4.	134-0404	[1]	SWITCH AS-PRESSURE (OIL FILTER BYPASS)
5.	3J-1907	[1]	SEAL-O-RING
6.	3J-7354	[1]	SEAL-O-RING

#SEBP32470716

235-8345: HYDRAULIC AR

HYDRAULIC AR

235-8345 HYDRAULIC AR -BLADE CONTROL
S/N AKM1-1234; ALY1-1334
PROVIDES OPTIONAL PILOT CONTROL FOR THE DOZER
FOR USE WITH HYDRAULIC AR 4-VALVE (HYD IMP), WINCH AR TOWING (ELEC), COVER GP CONSOLE (HYD IMP), COVER GP CONSOLE (ELEC WINCH)
CANNOT BE USED WITH WINCH AR TOWING, CAB AR WITHOUT A/C, COVER GP CONSOLE (IMP), COVER GP CONSOLE (WINCH), HYDRAULIC AR 4-VALVE
AN ATTACHMENT

i02085967 SEBP3247

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
230-2117 Y	[1]	CAB AR
230-2109 Y	[1]	ELECTRONICS AR-MACHINE
230-2107 Y	[1]	HYDRAULIC AR-3 VALVE
238-6589 Y	[1]	PLATE & FILM GP
Y		SEPARATE ILLUSTRATION

#SEBP32470717

230-6111: HYDRAULIC AR-2 VALVE

HYDRAULIC AR-2 VALVE

230-6111 HYDRAULIC AR-2 VALVE
S/N AKM1-1234; ALY1-1334
REPLACED BY @@@@@254-6940@@@@@
FOR USE WITH SEMI-UNIVERSAL BULLDOZER & WINCH
CANNOT BE USED WITH RIPPER
AN ATTACHMENT

i01850225 SEBP3247

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
165-4481 Y	[1]	CONTROL GP-HYDRAULIC HAND (BULLDOZER)
228-3554 Y	[1]	LINES GP-TILT CYLINDER
209-6768 Y	[1]	VALVE GP-BANK 2 (BULLDOZER)
Y		SEPARATE ILLUSTRATION

#SEBP32470718

254-6940: HYDRAULIC AR-2 VALVE

HYDRAULIC AR-2 VALVE

254-6940 HYDRAULIC AR-2 VALVE
S/N AKM1235-UP; ALY1335-UP
FOR USE WITH BULLDOZER AR SEMI-UNIVERSAL
CANNOT BE USED WITH RIPPER, HYDRAULIC AR 4-VALVE
AN ATTACHMENT

i02135348 SEBP3247

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
254-8440 Y	[1]	CONTROL AR-PILOT HYDRAULIC
230-8750 Y	[1]	LINES GP-PILOT
254-7283 Y	[1]	LINES GP-TILT CYLINDER

	[2]	PLUG AS
		(EACH INCLUDES)
9S-4183	[1]	PLUG (1-1/16-12-THD)
3D-2824	[1]	SEAL-O-RING
Y		SEPARATE ILLUSTRATION

#SEBP32470719

189-4623: HYDRAULIC AR-3 VALVE

HYDRAULIC AR-3 VALVE

189-4623 HYDRAULIC AR-3 VALVE
S/N AKM1-1234; ALY1-1334
PART OF 189-4616, 191-6307 GENERAL AR

i02039265 SEBP3247

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
156-8948 Y	[1]	CONTROL GP-HYDRAULIC HAND (BULLDOZER)
163-0761 Y	[1]	LINES GP-ANGLE & TILT
198-5180 Y	[1]	LINES GP-DIAGNOSTIC
220-0896 Y	[1]	LINES GP-LIFT CYLINDER
220-1322 Y	[1]	LINES GP-PILOT
191-9531 Y	[1]	LINES GP-PUMP
191-9532 Y	[1]	LINES GP-STEERING
		S/N AKM1-765; ALY1-853
236-3972 Y	[1]	LINES GP-STEERING
		S/N AKM766-1234; ALY854-1334
191-9536 Y	[1]	MOTOR GP-PISTON (STEERING)
218-0100 Y	[1]	MOUNTING GP-VALVE
222-1214 Y	[1]	PUMP GP-PISTON (STEERING)
174-4485 Y	[1]	TANK & FILTER GP-HYDRAULIC
209-6765 Y	[1]	VALVE GP-BANK 3 (BULLDOZER)
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION