253-0937 VALVE GP-SOLENOID S/N AKM1235-UP; ALY1335-UP PART OF 250-5788 VALVE & MTG GP-BULLDOZER AN ATTACHMENT D6N

HYDRAULIC SYSTEM

VALVE GP-SOLENOID

0. 253-0937 VALVE GP-S
1. 341-9213 VALVE GP-S

IMPLEMENTS

BULLDOZER GP

2. 225-8291 BULLDOZER
3. 223-6303 BULLDOZER
4. 223-6304 BULLDOZER
5. 225-8288 BULLDOZER
6. 225-8289 BULLDOZER
7. 225-8292 BULLDOZER
8. 262-9871 BULLDOZER
9. 262-9872 BULLDOZER
0. INFORMATION

TRACK-TYPE TRACTOR D6N TRACK-TYPE TRACTOR AKM
D6N XL, D/S, LGP TRACK-TYPE TRACTOR AKM00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3247 D6N AKM (2001)

HYDRAULIC SYSTEM

VALVE GP-SOLENOID

189-8898 VALVE GP-SOLENOID

201-0950 VALVE GP-SOLENOID

235-4605 VALVE GP-SOLENOID

253-0937 VALVE GP-SOLENOID

341-9213 VALVE GP-SOLENOID

#SEBP32470830

253-0937: VALVE GP-SOLENOID

VALVE GP-SOLENOID

253-0937 VALVE GP-SOLENOID
S/N AKM1235-UP; ALY1335-UP
PART OF 250-5788 VALVE & MTG GP-BULLDOZER
AN ATTACHMENT

i02221677 SEBP3247

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	146-3728	[1]	WASHER-SPRING
2.	312-8629	[1]	COIL AS (24-VOLT)
3.	033-6043	[1]	SEAL-O-RING
4.	6V-4589	[1]	SEAL-O-RING
5.	8L-2746	[1]	SEAL-O-RING

#SEBP32470831

341-9213: VALVE GP-SOLENOID

VALVE GP-SOLENOID

341-9213 VALVE GP-SOLENOID -GRADE CONTROL
S/N AKM1235-UP; ALY1335-UP
24-VOLT
PART OF 250-5788 VALVE & MTG GP-BULLDOZER
AN ATTACHMENT

i04789527 SEBP3247

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	191-9247	[1]	WASHER (19.15X31.65X2.36-MM THK)
2.	198-2914	[1]	NUT (3/4-32-THD)
3.	312-8629	[1]	COIL AS (24-VOLT)
4.	033-6043	[1]	SEAL-O-RING
5.	6V-4589	[1]	SEAL-O-RING
6.	8L-2746	[1]	SEAL-O-RING

#SEBP32470832

225-8291: BULLDOZER AR-ANGLING

BULLDOZER AR-ANGLING

225-8291 BULLDOZER AR-ANGLING -XL-LGP-FINE GRADING
S/N G6M1-UP
AN ATTACHMENT

i02885297 SEBP3247

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

Part No	Qty	Parts name
110-5230 Y	[1]	BLADE GP-ANGLING
		-OR-
235-5000 Y	[1]	BLADE & EDGE GP-ANGLING
112-7443 Y	[1]	C-FRAME GP-POWER ANGLING
228-0320 Y	[2]	CYLINDER GP-ANGLING
		-OR-
321-7048 Y	[2]	CYLINDER GP-ANGLING (BULLDOZER)
110-3269 Y	[2]	CYLINDER GP-BULLDOZER LIFT
160-0054 Y	[1]	CYLINDER GP-TILT (BULLDOZER)
112-3447 Y	[1]	LINES GP-ANGLE & TILT
		-OR-
295-1831 Y	[1]	LINES GP-ANGLE & TILT
220-0897 Y	[1]	LINES GP-LIFT CYLINDER (POWER ANGLE, TILT BLADE)
190-5328 Y	[1]	LINK GP-PITCH
134-6775 Y	[1]	PIN GP-CYLINDER

107-8126	[2]	BEARING (FRAME)
		(BEARING MUST BE PRESSED INTO THE C-FRAME MOUNTING BORE IN THE TRACTOR MAIN FRAME PRIOR TO INSTALLATION OF C-FRAME)
109-0959	[4]	RING
8T-7371	[1]	PLATE-SERIAL NUMBER (BULLDOZER)
		(ON UPPER RH CORNER OF BLADE)
4B-4158	[2]	SCREW-DRIVE (NO 4X0.25-IN)
Y		SEPARATE ILLUSTRATION

#SEBP32470833

223-6303: BULLDOZER AR-PWR ANGLE & TILT

BULLDOZER AR-PWR ANGLE & TILT

223-6303 BULLDOZER AR-PWR ANGLE & TILT -XL-WITH ADJUSTABLE PITCH
S/N B6X1-UP
AN ATTACHMENT

i02810629 SEBP3247

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

Part No	Qty	Parts name
110-5230 Y	[1]	BLADE GP-ANGLING
110-5226 Y	[1]	C-FRAME GP-POWER ANGLING
110-3269 Y	[2]	CYLINDER GP-BULLDOZER LIFT
228-0320 Y	[2]	CYLINDER GP-ANGLING
		-OR-
321-7048 Y	[2]	CYLINDER GP-ANGLING (BULLDOZER)
160-0054 Y	[1]	CYLINDER GP-TILT (BULLDOZER)
110-6113 Y	[1]	LINES GP-ANGLE & TILT
		-OR-
295-1830 Y	[1]	LINES GP-ANGLE & TILT
220-0897 Y	[1]	LINES GP-LIFT CYLINDER (POWER ANGLE, TILT BLADE)
190-5328 Y	[1]	LINK GP-PITCH
134-6775 Y	[1]	PIN GP-CYLINDER

107-8126	[2]	BEARING
		(BEARING MUST BE PRESSED INTO THE C-FRAME MOUNTING BORE IN THE TRACTOR MAIN FRAME PRIOR TO INSTALLATION OF C-FRAME)
109-0959	[4]	RING
8T-7371	[1]	PLATE-SERIAL NUMBER (BULLDOZER)
		(ON UPPER RH CORNER OF BLADE)
4B-4158	[2]	SCREW-DRIVE (NO 4X0.25-IN)
Y		SEPARATE ILLUSTRATION

#SEBP32470834

223-6304: BULLDOZER AR-PWR ANGLE & TILT

BULLDOZER AR-PWR ANGLE & TILT

223-6304 BULLDOZER AR-PWR ANGLE & TILT -LGP-WITH ADJUSTABLE PITCH
S/N B6L1-UP
AN ATTACHMENT

i02810630 SEBP3247

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

Part No	Qty	Parts name
112-7446 Y	[1]	BLADE GP-ANGLING
112-7443 Y	[1]	C-FRAME GP-POWER ANGLING
110-3269 Y	[2]	CYLINDER GP-BULLDOZER LIFT
228-0320 Y	[2]	CYLINDER GP-ANGLING
		-OR-
321-7048 Y	[2]	CYLINDER GP-ANGLING (BULLDOZER)
160-0054 Y	[1]	CYLINDER GP-TILT (BULLDOZER)
112-3447 Y	[1]	LINES GP-ANGLE & TILT
		-OR-
295-1831 Y	[1]	LINES GP-ANGLE & TILT
220-0897 Y	[1]	LINES GP-LIFT CYLINDER (POWER ANGLE, TILT BLADE)
190-5328 Y	[1]	LINK GP-PITCH
134-6775 Y	[1]	PIN GP-CYLINDER

107-8126	[2]	BEARING
		(BEARING MUST BE PRESSED INTO THE C-FRAME MOUNTING BORE IN THE TRACTOR MAIN FRAME PRIOR TO INSTALLATION OF C-FRAME)
109-0959	[4]	RING
8T-7371	[1]	PLATE-SERIAL NUMBER (BULLDOZER)
		(ON UPPER RH CORNER OF BLADE)
4B-4158	[2]	SCREW-DRIVE (NO 4X0.25-IN)
Y		SEPARATE ILLUSTRATION

#SEBP32470835

225-8288: BULLDOZER AR-PWR ANGLE & TILT

BULLDOZER AR-PWR ANGLE & TILT

225-8288 BULLDOZER AR-PWR ANGLE & TILT -POWER ANGLE & TILT W/ADJ PITCH
S/N F6W1-99999
3-M FOLDABLE BLADE
REPLACED BY @@@@@262-9872@@@@@
FOR USE WITH FINE GRADING
AN ATTACHMENT

i01849183 SEBP3247

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

Part No	Qty	Parts name
226-5426 Y	[1]	BLADE GP
112-7443 Y	[1]	C-FRAME GP-POWER ANGLING
228-0320 Y	[2]	CYLINDER GP-ANGLING
110-3269 Y	[2]	CYLINDER GP-BULLDOZER LIFT
160-0054 Y	[1]	CYLINDER GP-TILT (BULLDOZER)
112-3447 Y	[1]	LINES GP-ANGLE & TILT
220-0897 Y	[1]	LINES GP-LIFT CYLINDER (POWER ANGLE, TILT BLADE)
190-5328 Y	[1]	LINK GP-PITCH
134-6775 Y	[1]	PIN GP-CYLINDER

107-8126	[2]	BEARING (SPECIAL C-FRAME)
		(PRESSED INTO C-FRAME MOUNTING BORE IN TRACTOR MAIN FRAME PRIOR TO INSTALLATION OF C-FRAME)
109-0959	[4]	RING
8T-7371	[1]	PLATE-SERIAL NUMBER (BULLDOZER)
4B-4158	[2]	SCREW-DRIVE (NO 4X0.25-IN)
Y		SEPARATE ILLUSTRATION

#SEBP32470836

225-8289: BULLDOZER AR-PWR ANGLE & TILT

BULLDOZER AR-PWR ANGLE & TILT

225-8289 BULLDOZER AR-PWR ANGLE & TILT -POWER ANGLE & TILT W/PITCH
S/N F6Y1-99999
3-M FOLDABLE BLADE
REPLACED BY @@@@@262-9871@@@@@
AN ATTACHMENT

i01849202 SEBP3247

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

Part No	Qty	Parts name
223-2260 Y	[1]	BLADE GP
112-7443 Y	[1]	C-FRAME GP-POWER ANGLING
228-0320 Y	[2]	CYLINDER GP-ANGLING
110-3269 Y	[2]	CYLINDER GP-BULLDOZER LIFT
160-0054 Y	[1]	CYLINDER GP-TILT (BULLDOZER)
112-3447 Y	[1]	LINES GP-ANGLE & TILT
220-0897 Y	[1]	LINES GP-LIFT CYLINDER (POWER ANGLE, TILT BLADE)
190-5328 Y	[1]	LINK GP-PITCH
134-6775 Y	[1]	PIN GP-CYLINDER

107-8126	[2]	BEARING (SPECIAL C-FRAME)
		(PRESSED INTO C-FRAME MOUNTING BORE IN TRACTOR MAIN FRAME PRIOR TO INSTALLATION OF C-FRAME)
109-0959	[4]	RING
8T-7371	[1]	PLATE-SERIAL NUMBER (BULLDOZER)
4B-4158	[2]	SCREW-DRIVE (NO 4X0.25-IN)
Y		SEPARATE ILLUSTRATION

#SEBP32470837

225-8292: BULLDOZER AR-PWR ANGLE & TILT

BULLDOZER AR-PWR ANGLE & TILT

225-8292 BULLDOZER AR-PWR ANGLE & TILT -LGP, FINE GRADING-WITH ADJUSTABLE PITCH
S/N G6G1-UP
AN ATTACHMENT

i02885458 SEBP3247

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

Part No	Qty	Parts name
137-8729 Y	[1]	BLADE GP-ANGLING
112-7443 Y	[1]	C-FRAME GP-POWER ANGLING
110-3269 Y	[2]	CYLINDER GP-BULLDOZER LIFT
228-0320 Y	[2]	CYLINDER GP-ANGLING
		-OR-
321-7048 Y	[2]	CYLINDER GP-ANGLING (BULLDOZER)
160-0054 Y	[1]	CYLINDER GP-TILT (BULLDOZER)
112-3447 Y	[1]	LINES GP-ANGLE & TILT
		-OR-
295-1831 Y	[1]	LINES GP-ANGLE & TILT
220-0897 Y	[1]	LINES GP-LIFT CYLINDER (POWER ANGLE, TILT BLADE)
190-5328 Y	[1]	LINK GP-PITCH
134-6775 Y	[1]	PIN GP-CYLINDER

107-8126	[2]	BEARING (FRAME)
		(BEARING MUST BE PRESSED INTO THE C-FRAME MOUNTING BORE IN THE TRACTOR MAIN FRAME PRIOR TO INSTALLATION OF C-FRAME)
109-0959	[4]	RING
8T-7371	[1]	PLATE-SERIAL NUMBER (BULLDOZER)
		(ON UPPER RH CORNER OF BLADE)
4B-4158	[2]	SCREW-DRIVE (NO 4X0.25-IN)
Y		SEPARATE ILLUSTRATION

#SEBP32470838

262-9871: BULLDOZER AR-PWR ANGLE & TILT

BULLDOZER AR-PWR ANGLE & TILT

262-9871 BULLDOZER AR-PWR ANGLE & TILT -LGP-WITH ADJUSTABLE PITCH
S/N DPM1-UP
3-M FOLDABLE BLADE
FOR USE WITH @@@@@177-2349@@@@@, @@@@@177-2350@@@@@
AN ATTACHMENT

i02309438 SEBP3247

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

Part No	Qty	Parts name
257-8155 Y	[1]	BLADE GP-ANGLING
112-7443 Y	[1]	C-FRAME GP-POWER ANGLING
110-3269 Y	[2]	CYLINDER GP-BULLDOZER LIFT
228-0320 Y	[2]	CYLINDER GP-ANGLING
160-0054 Y	[1]	CYLINDER GP-TILT (BULLDOZER)
112-3447 Y	[1]	LINES GP-ANGLE & TILT
220-0897 Y	[1]	LINES GP-LIFT CYLINDER (POWER ANGLE, TILT BLADE)
190-5328 Y	[1]	LINK GP-PITCH
134-6775 Y	[1]	PIN GP-CYLINDER

8T-7371	[1]	PLATE-SERIAL NUMBER (BULLDOZER)
		(ON BACK OF MOLDBOARD NEAR TOP AT RH END)
4B-4158	[2]	SCREW-DRIVE (NO 4X0.25-IN)
107-8126 J	[2]	BEARING
109-0959 J	[4]	RING
J		PRESSED INTO C-FRAME MOUNTING BORE IN TRACTOR MAIN FRAME
Y		SEPARATE ILLUSTRATION

#SEBP32470839

262-9872: BULLDOZER AR-PWR ANGLE & TILT

BULLDOZER AR-PWR ANGLE & TILT

262-9872 BULLDOZER AR-PWR ANGLE & TILT -LGP-WITH ADJUSTABLE PITCH
S/N B6F1-UP
3-M FOLDABLE BLADE
FOR USE WITH @@@@@177-2351@@@@@, FINE GRADING ARRANGEMENT
AN ATTACHMENT

i02325713 SEBP3247

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

Part No	Qty	Parts name
257-8135 Y	[1]	BLADE GP-ANGLING
112-7443 Y	[1]	C-FRAME GP-POWER ANGLING
110-3269 Y	[2]	CYLINDER GP-BULLDOZER LIFT
228-0320 Y	[2]	CYLINDER GP-ANGLING
160-0054 Y	[1]	CYLINDER GP-TILT (BULLDOZER)
112-3447 Y	[1]	LINES GP-ANGLE & TILT
220-0897 Y	[1]	LINES GP-LIFT CYLINDER (POWER ANGLE, TILT BLADE)
190-5328 Y	[1]	LINK GP-PITCH
134-6775 Y	[1]	PIN GP-CYLINDER

107-8126 J	[2]	BEARING
109-0959 J	[4]	RING
4B-4158	[2]	SCREW-DRIVE (NO 4X0.25-IN)
8T-7371	[1]	PLATE-SERIAL NUMBER (BULLDOZER)
		(ON BACK OF MOLDBOARD AT RH END NEAR TOP)
J		PRESSED INTO C-FRAME MOUNTING BORE IN TRACTOR MAIN FRAME
Y		SEPARATE ILLUSTRATION