OPERATOR STATION
AIR CONDITIONER GPCONSOLE GP
CONTROL GP-BRAKE
CONTROL GP-HANDLE
OPERATOR STATION
AIR CONDITIONER GP
#SEBP32470880
183-5106: COMPRESSOR GP-REFRIGERANT
183-5106 COMPRESSOR GP-REFRIGERANT
S/N AKM1-UP; ALY1-UP
PART OF 189-2229 COMPRESSOR GP-REFRIGERANT
S/N AKM1-UP; ALY1-UP
PART OF 189-2229 COMPRESSOR GP-REFRIGERANT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP32470881
189-2229: COMPRESSOR GP-REFRIGERANT
189-2229 COMPRESSOR GP-REFRIGERANT
S/N AKM1-UP; ALY1-UP
PART OF 189-4622, 230-2101 INSTALLATION AR-ENGINE
S/N AKM1-UP; ALY1-UP
PART OF 189-4622, 230-2101 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 106-4159 | [1] | SPACER (11.13X19.05X13.5-MM THK) | |
| 2. | 123-8395 Y | [1] | PULLEY AS-IDLER (8-GROOVE) | |
| 3. | 183-5106 Y | [1] | COMPRESSOR GP-REFRIGERANT | |
| 4. | 201-4230 | [1] | GUARD | |
| 5. | 255-1281 M | [2] | BOLT-FLANGE HEAD (M8X1.25X100-MM) | |
| 6. | 7X-2538 M | [2] | BOLT (M8X1.25X100-MM) | |
| 7. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32470882
175-2540: CONDENSER GP-REFRIGERANT
175-2540 CONDENSER GP-REFRIGERANT
S/N AKM1-831; ALY1-907
PART OF 167-1458 AIR CONDITIONER GP
S/N AKM1-831; ALY1-907
PART OF 167-1458 AIR CONDITIONER GP
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5239 | [1] | RELAY AS (24-VOLT)(AIR CONDITIONER CONDENSER) | |
| 2. | 3S-2093 | [2] | STRAP-CABLE | |
| 3. | 8C-3756 | [1] | FILM-IDENTIFICATION (AIR CONDITIONER)(CONDENSER) | |
| 4. | 169-7434 | [2] | FAN AS-CONDENSER (5-BLADE) | |
| 5. | 175-2539 | [1] | CASE AS | |
| 6. | 179-0589 | [2] | GUARD-FAN | |
| 7. | 199-7698 | [1] | COIL AS (CONDENSER) | |
| 8. | 234-2912 | [1] | HARNESS AS-HEATER & AIR COND (CONDENSER FANS) | |
| 8A. | 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8B. | 9X-1054 | [1] | PLUG AS-CONNECTOR (4-PIN) | |
| 8C. | 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | |
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 9. | 4P-8134 | [1] | CLIP (LADDER) | |
| 10. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 11. | 5C-9553 M | [1] | BOLT (M6X1X16-MM) | |
| 12. | 5P-4116 | [8] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 13. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 14. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 15. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 16. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 17. | 8T-4908 M | [8] | BOLT (M8X1.25X25-MM) | |
| 18. | 126-8472 E | SEAL (79-CM) | ||
| 19. | 5P-5673 D | SEAL (1.9-M) | ||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP32470883
245-4413: CONDENSER GP-REFRIGERANT
245-4413 CONDENSER GP-REFRIGERANT
S/N AKM832-UP; ALY908-UP
PART OF 167-1458 AIR CONDITIONER GP
S/N AKM832-UP; ALY908-UP
PART OF 167-1458 AIR CONDITIONER GP
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5239 | [2] | RELAY AS (24-VOLT)(CONDENSER FAN MOTOR) | |
| 2. | 3S-2093 | [2] | STRAP-CABLE | |
| 3. | 8C-3756 | [1] | FILM-IDENTIFICATION (AIR CONDITIONER)(CONDENSER) | |
| 4. | 175-2539 | [1] | CASE AS | |
| 5. | 199-7698 | [1] | COIL AS (CONDENSER) | |
| 6. | 245-5891 | [1] | HARNESS AS-HEATER & AIR COND | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-1054 | [2] | PLUG AS-CONNECTOR (4-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 7. | 304-3715 | [2] | FAN AS-CONDENSER (24-VOLT, 5-BLADE) | |
| 8. | 4P-8134 | [1] | CLIP (LADDER) | |
| 9. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 10. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 11. | 8T-4137 M | [8] | BOLT (M10X1.5X20-MM) | |
| 12. | 8T-4138 M | [1] | BOLT (M6X1X20-MM) | |
| 13. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 14. | 8T-4224 | [8] | WASHER-HARD (8.8X16X2-MM THK) | |
| 15. | 8T-4908 M | [8] | BOLT (M8X1.25X25-MM) | |
| 16. | 126-8472 E | SEAL (79-CM) | ||
| 17. | 5P-5673 D | SEAL (0.8-M EACH) | ||
| 17A. | 5P-5673 D | SEAL (0.2-M EACH) | ||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP32470884
237-2832: CONSOLE GP-OPERATOR
237-2832 CONSOLE GP-OPERATOR -HYDRAULIC IMPLEMENT
S/N AKM1-UP; ALY1-UP
PART OF 237-7282 COVER GP-CONSOLE
AN ATTACHMENT
S/N AKM1-UP; ALY1-UP
PART OF 237-7282 COVER GP-CONSOLE
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP32470885
237-2834: CONSOLE GP-OPERATOR
237-2834 CONSOLE GP-OPERATOR -RIPPER, WINCH
S/N AKM1-UP; ALY1-UP
PART OF 237-7283 COVER GP-CONSOLE
AN ATTACHMENT
S/N AKM1-UP; ALY1-UP
PART OF 237-7283 COVER GP-CONSOLE
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP32470886
248-0760: CONTROL GP-GOVERNOR & BRAKE
248-0760 CONTROL GP-GOVERNOR & BRAKE
S/N AKM1029-2409; ALY1141-3033
PART OF 248-0770 PEDAL GP-GOVERNOR & BRAKE
ALSO AN ATTACHMENT
S/N AKM1029-2409; ALY1141-3033
PART OF 248-0770 PEDAL GP-GOVERNOR & BRAKE
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [3] | STRAP-CABLE | |
| 2. | 160-2443 Y | [1] | SENSOR GP-POSITION (ROTARY)(DECELERATION PEDAL) | |
| 3. | 199-4787 | [1] | PIN | |
| 4. | 200-8575 | [1] | PEDAL AS (DECELERATOR) | |
| 5. | 206-1487 | [1] | SWITCH AS-ROLLER (BRAKE PEDAL) | |
| 2H-3922 | [1] | LOCKWASHER | ||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 6V-8370 | [1] | NUT-HEX (3/4-32-THD) | ||
| 9X-0199 | [1] | BOOT-SWITCH | ||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 6. | 214-1606 | [1] | BOSS | |
| 7. | 214-4863 Y | [1] | SENSOR GP-POSITION (ROTARY)(SERVICE BRAKE PEDAL) | |
| 8. | 214-5012 | [2] | SPRING | |
| 9. | 214-5013 | [1] | SPRING | |
| 10. | 214-7536 | [3] | SPACER (8.3X10.8X6-MM THK) | |
| 11. | 248-0758 | [1] | ARM AS (DECELERATOR) | |
| 12. | 248-0761 | [1] | SUPPORT AS | |
| 13. | 248-0790 | [1] | PEDAL AS-BRAKE (SERVICE BRAKE) | |
| 14. | 248-2749 | [1] | SHAFT | |
| 15. | 248-2750 | [1] | SHAFT | |
| 16. | 095-0916 | [1] | RING-RETAINING | |
| 17. | 138-1645 | [1] | PIN-SPRING | |
| 18. | 2K-9183 | [1] | PIN-SPRING | |
| 19. | 3K-6662 | [4] | BEARING | |
| 20. | 4P-7581 | [2] | CLIP (LADDER) | |
| 21. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 22. | 6V-0894 | [2] | SEAL-O-RING | |
| 23. | 6V-4447 | [2] | SEAL-LIP TYPE | |
| 24. | 8T-0328 | [4] | WASHER-HARD (5.5X10X1-MM THK) | |
| 25. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 26. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 27. | 8T-4189 M | [3] | BOLT (M8X1.25X20-MM) | |
| 28. | 8T-4908 M | [2] | BOLT (M8X1.25X25-MM) | |
| 29. | 8T-6699 M | [4] | BOLT-SOCKET HEAD (M5X0.8X35-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32470887
112-4820: CONTROL GP-HANDLE
112-4820 CONTROL GP-HANDLE -STEERING, TRANSMISSION
S/N AKM1-831; ALY1-907
PART OF 166-6082 CONTROL GP-STEERING & XMSN
ALSO AN ATTACHMENT
S/N AKM1-831; ALY1-907
PART OF 166-6082 CONTROL GP-STEERING & XMSN
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1H-3340 | [1] | BOLT (10-24X1-IN) | |
| 2. | 151-9275 | [1] | KIT-RECEPTACLE (6-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3. | 3E-3383 | [1] | WEDGE-RECEPTACLE LOCK (6-PIN) | |
| 4. | 5H-9899 | [1] | RING-RETAINING (EXTERNAL) | |
| 5. | 6V-2314 M | [2] | BOLT (M5X0.8X35-MM) | |
| 6. | 6V-3545 | [1] | BEARING-ROLLER | |
| 7. | 7X-4771 | [1] | SEAL-V-RING | |
| 8. | 7Y-5226 M | [2] | NUT (M5X0.8-THD) | |
| 9. | 8T-8729 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 10. | 103-6262 | [2] | SCREW-MACHINE (4-40X0.63-IN) | |
| 11. | 214-4862 CY | [1] | SENSOR GP-POSITION (STEERING, XMSN CONTROL HANDLE) | |
| 12. | 110-2028 | [2] | SCREW-PAN HEAD (10-14X0.75-IN) | |
| 13. | 110-7882 | [1] | SWITCH AS-LIMIT (REVERSE) | |
| 5S-4246 | [3] | LOCKWASHER | ||
| 6V-8818 | [3] | SCREW-MACHINE (4-40-THD) | ||
| 14. | 111-8642 | [1] | COVER-FRONT | |
| 15. | 111-8950 | [1] | ANGLE | |
| 16. | 112-4740 | [1] | HANDLE | |
| 17. | 112-4757 | [1] | COVER | |
| 18. | 128-2660 | [1] | WIRE AS | |
| 19. | 131-0447 | [2] | NUT-SPECIAL (15/32-32-THD) | |
| 20. | 132-7419 | [1] | SWITCH AS-PUSH BUTTON (ELECTRONIC-DOWNSHIFT) | |
| 144-0331 | [1] | CAP-PUSH BUTTON (YELLOW) | ||
| 21. | 132-7450 | [1] | SWITCH AS-PUSH BUTTON (ELECTRONIC-UPSHIFT) | |
| 144-0331 | [1] | CAP-PUSH BUTTON (YELLOW) | ||
| 22. | 151-5803 | [1] | SHAFT AS-DETENT | |
| 23. | 158-2734 | [2] | SPRING | |
| 24. | 158-2735 | [1] | BASE | |
| 25. | 6V-1232 | [2] | SCREW-BUTTON HEAD (8-32X9.52-MM) | |
| 26. | 9W-1464 | [2] | SCREW (1/4-20X1-IN) | |
| 27. | 7X-0584 | [1] | WASHER-HARD (13.5X20.5X2-MM THK) | |
| 28. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 29. | 9X-8256 | [3] | WASHER (6.6X12X2-MM THK) | |
| 30. | 6V-2689 BD | TUBE-HEAT SHRINK (6.35-MM DIA) | ||
| 31. | 8M-2771 | [1] | CLIP | |
| 32. | 226-9423 | [2] | SPRING | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32470888
208-6070: CONTROL GP-HANDLE
208-6070 CONTROL GP-HANDLE -BULLDOZER
S/N AKM1-2080; ALY1-2485
PART OF 257-5081 CONTROL GP-HANDLE, 238-9556, 238-9557 CONTROL GP-PILOT OPERATED HYD, 240-9653 VALVE GP-PILOT
AN ATTACHMENT
S/N AKM1-2080; ALY1-2485
PART OF 257-5081 CONTROL GP-HANDLE, 238-9556, 238-9557 CONTROL GP-PILOT OPERATED HYD, 240-9653 VALVE GP-PILOT
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 2. | 144-0331 | [3] | CAP-PUSH BUTTON (YELLOW) | |
| 3. | 208-6067 | [1] | HOUSING AS | |
| 4. | 162-8387 | [1] | LEVER | |
| 5. | 9B-1117 | [2] | LOCKWASHER | |
| 6. | 162-8389 | [1] | PLATE (SWITCH) | |
| 7. | 175-4170 | [2] | SCREW-PAN HEAD (6-19X1.625-IN) | |
| 8. | 208-6081 | [1] | SLEEVE | |
| 9. | 218-7136 BE | SLEEVE | ||
| 10. | 179-7376 | [1] | SWITCH AS-PUSH BUTTON (IMPLEMENT) | |
| 5P-8435 BE | WIRE (22-GA) | |||
| 162-8378 | [1] | SWITCH AS-PUSH BUTTON (IMPLEMENT) | ||
| 144-0331 | [1] | CAP-PUSH BUTTON (YELLOW) | ||
| 11. | 6V-1614 BD | TUBE-HEAT SHRINK (9.52-MM DIA) | ||
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP32470889
230-9136: CONTROL GP-HANDLE
230-9136 CONTROL GP-HANDLE -RIPPER CONTROL
S/N AKM1-UP; ALY1-UP
PART OF 237-2828 CONTROL GP-JOYSTICK
AN ATTACHMENT
S/N AKM1-UP; ALY1-UP
PART OF 237-2828 CONTROL GP-JOYSTICK
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8U-9427 | [2] | KIT-PLUNGER | |
| (EACH INCLUDES PLUNGER, GUIDE, SEAL, & O-RING) | ||||
| 2. | 131-0432 | [1] | KIT-SPRING | |
| (INCLUDES SPRINGS) | ||||
| 3. | 201-1734 | [1] | KIT-CONTROL | |
| (INCLUDES CAM, LEVER, LEVER PIN, COVER & BOLTS) | ||||
| 4. | 149-8652 | [1] | BALL | |
| 5. | 8U-5892 | [1] | BOOT | |
| 6. | 241-5734 | [1] | PLATE-RETAINING | |
| 7. | 241-5735 | [2] | KIT-REGULATOR | |
| (EACH INCLUDES RETAINER-WASHERS, RETAINER-SPRING, SPRING, CLIP, SHIMS & SPOOL) | ||||
