OPERATOR STATION
CONTROL GP-HYDRAULICCONTROL GP
HYDRAULIC SYSTEM
VALVE GP-PILOTOPERATOR STATION
CONTROL GP-HYDRAULIC
#SEBP32470900
164-3504: CONTROL GP-HYDRAULIC HAND
164-3504 CONTROL GP-HYDRAULIC HAND -RIPPER
S/N AKM832-1234; ALY908-1334
PART OF 173-8641, 229-2831 HYDRAULIC AR-4 VALVE
AN ATTACHMENT
S/N AKM832-1234; ALY908-1334
PART OF 173-8641, 229-2831 HYDRAULIC AR-4 VALVE
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1B-0676 | [2] | PIN | |
| 2. | 3B-4615 | [2] | PIN-COTTER | |
| 3. | 3B-4617 | [2] | PIN-COTTER | |
| 4. | 5P-9209 | [4] | BEARING AS-NEEDLE | |
| 5. | 8M-8489 | [1] | DOWEL | |
| 6. | 102-9478 | [1] | FILM-INSTRUCTION (RIPPER CONTROL) | |
| 7. | 111-9899 | [1] | BRACKET AS | |
| 8. | 111-9900 | [1] | LEVER | |
| 9. | 118-9674 | [2] | END-YOKE ROD | |
| 10. | 121-0483 | [1] | ROD | |
| 11. | 121-0484 | [1] | LEVER | |
| 12. | 121-0487 | [1] | SHAFT AS | |
| 13. | 166-3603 | [1] | BOOT | |
| 14. | 177-4230 | [1] | PLATE | |
| 15. | 211-4634 | [1] | ROD-CONTROL | |
| 16. | 237-2836 C | [1] | PLATE AS | |
| 17. | 1B-2578 | [1] | NUT (3/8-16-THD) | |
| 18. | 2K-4973 | [1] | LOCKNUT (3/8-16-THD) | |
| 19. | 5C-7261 M | [2] | NUT (M8X1.25-THD) | |
| 20. | 8T-0192 | [1] | BOLT (3/8-16X2.25-IN) | |
| 21. | 8T-4121 | [12] | WASHER-HARD (11X21X2.5-MM THK) | |
| 22. | 8T-4195 M | [8] | BOLT (M10X1.5X30-MM) | |
| 23. | 8T-4229 | [1] | KNOB (BALL)(RIPPER CONTROL) | |
| 24. | 8T-4244 M | [2] | NUT (M12X1.75-THD) | |
| 25. | 9X-2042 M | [4] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| 26. | 9X-8257 | [4] | WASHER (17.5X30X3.5-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP32470901
165-4481: CONTROL GP-HYDRAULIC HAND
165-4481 CONTROL GP-HYDRAULIC HAND -BULLDOZER LIFT, TILT
S/N AKM1-831; ALY1-907
PART OF 230-6111 HYDRAULIC AR-2 VALVE, 229-2831 HYDRAULIC AR-4 VALVE
AN ATTACHMENT
S/N AKM1-831; ALY1-907
PART OF 230-6111 HYDRAULIC AR-2 VALVE, 229-2831 HYDRAULIC AR-4 VALVE
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1B-0676 | [5] | PIN | |
| 2. | 1B-8704 | [1] | KEY-WOODRUFF | |
| 3. | 3B-4615 | [5] | PIN-COTTER | |
| 4. | 3B-4617 | [1] | PIN-COTTER | |
| 5. | 3W-1493 | [1] | LEVER | |
| 6. | 3W-1495 | [1] | LEVER | |
| 7. | 5P-9209 | [10] | BEARING AS-NEEDLE | |
| 8. | 7F-3713 | [2] | ROD-CONTROL | |
| 9. | 7X-7915 | [3] | ROD END | |
| 10. | 9X-8257 | [5] | WASHER (17.5X30X3.5-MM THK) | |
| 11. | 8G-4659 | [1] | SHAFT AS | |
| 12. | 8T-4766 | [1] | ROD END | |
| 13. | 8T-6431 | [1] | ROD END | |
| 14. | 111-9867 | [1] | ROD | |
| 15. | 111-9870 | [1] | SHAFT AS | |
| 16. | 111-9871 | [1] | SUPPORT | |
| 17. | 111-9873 | [1] | ROD | |
| 18. | 111-9876 | [1] | SHAFT AS | |
| 19. | 111-9879 | [1] | LEVER | |
| 20. | 111-9886 | [1] | YOKE | |
| 21. | 111-9887 | [1] | ROD | |
| 22. | 111-9888 | [1] | ROD | |
| 23. | 111-9890 | [1] | LEVER | |
| 24. | 111-9891 | [1] | SHAFT AS | |
| 25. | 111-9892 | [1] | SUPPORT | |
| 26. | 115-1153 | [1] | HANDLE (HYDRAULIC HAND CONTROL) | |
| 27. | 118-9674 | [1] | END-YOKE ROD | |
| 28. | 220-2666 | [1] | FILM-INSTRUCTION (BULLDOZER LIFT, TILT) | |
| 29. | 166-3325 | [1] | BOOT | |
| 30. | 5C-7261 M | [4] | NUT (M8X1.25-THD) | |
| 31. | 6V-7744 M | [2] | LOCKNUT (M10X1.5-THD) | |
| 32. | 6V-9189 M | [3] | LOCKNUT (M8X1.25-THD) | |
| 33. | 8T-4121 | [12] | WASHER-HARD (11X21X2.5-MM THK) | |
| 34. | 8T-4133 M | [3] | NUT (M10X1.5-THD) | |
| 35. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 36. | 8T-4186 M | [1] | BOLT (M10X1.5X40-MM) | |
| 37. | 8T-4195 M | [9] | BOLT (M10X1.5X30-MM) | |
| 38. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| 39. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 40. | 8T-4244 M | [2] | NUT (M12X1.75-THD) | |
| 41. | 8T-7547 M | [3] | BOLT (M8X1.25X30-MM) | |
| M | METRIC PART | |||
#SEBP32470902
165-4481: CONTROL GP-HYDRAULIC HAND
165-4481 CONTROL GP-HYDRAULIC HAND -BULLDOZER LIFT, TILT
S/N AKM832-1234; ALY908-1334
PART OF 230-6111 HYDRAULIC AR-2 VALVE, 229-2831 HYDRAULIC AR-4 VALVE
AN ATTACHMENT
S/N AKM832-1234; ALY908-1334
PART OF 230-6111 HYDRAULIC AR-2 VALVE, 229-2831 HYDRAULIC AR-4 VALVE
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1B-0676 | [5] | PIN | |
| 2. | 1B-8704 | [1] | KEY-WOODRUFF | |
| 3. | 3B-4615 | [5] | PIN-COTTER | |
| 4. | 3B-4617 | [1] | PIN-COTTER | |
| 5. | 3W-1493 | [1] | LEVER | |
| 6. | 3W-1495 | [1] | LEVER | |
| 7. | 5P-9209 | [10] | BEARING AS-NEEDLE | |
| 8. | 7F-3713 | [2] | ROD-CONTROL | |
| 9. | 7X-7915 | [3] | ROD END | |
| 10. | 8G-4659 | [1] | SHAFT AS | |
| 11. | 8T-4766 | [1] | ROD END | |
| 12. | 111-9867 | [1] | ROD | |
| 13. | 111-9870 | [1] | SHAFT AS | |
| 14. | 111-9871 | [1] | SUPPORT | |
| 15. | 111-9873 | [1] | ROD | |
| 16. | 111-9876 | [1] | SHAFT AS | |
| 17. | 111-9879 | [1] | LEVER | |
| 18. | 111-9886 | [1] | YOKE | |
| 19. | 111-9887 | [1] | ROD | |
| 20. | 111-9888 | [1] | ROD | |
| 21. | 111-9891 | [1] | SHAFT AS | |
| 22. | 111-9892 | [1] | SUPPORT | |
| 23. | 115-1153 | [1] | HANDLE (BULLDOZER CONTROL) | |
| 24. | 118-9674 | [1] | END-YOKE ROD | |
| 25. | 220-2666 | [1] | FILM-INSTRUCTION (BULLDOZER LIFT, TILT) | |
| 26. | 242-3845 | [1] | BOOT | |
| 27. | 255-5974 | [1] | ROD END | |
| 28. | 111-9890 | [1] | LEVER | |
| 29. | 5C-7261 M | [4] | NUT (M8X1.25-THD) | |
| 30. | 6V-7744 M | [2] | LOCKNUT (M10X1.5-THD) | |
| 31. | 6V-9189 M | [3] | LOCKNUT (M8X1.25-THD) | |
| 32. | 8T-4121 | [12] | WASHER-HARD (11X21X2.5-MM THK) | |
| 33. | 8T-4133 M | [3] | NUT (M10X1.5-THD) | |
| 34. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 35. | 8T-4186 M | [1] | BOLT (M10X1.5X40-MM) | |
| 36. | 8T-4195 M | [9] | BOLT (M10X1.5X30-MM) | |
| 37. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| 38. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 39. | 8T-4244 M | [2] | NUT (M12X1.75-THD) | |
| 40. | 8T-7547 M | [3] | BOLT (M8X1.25X30-MM) | |
| 41. | 9X-8257 | [5] | WASHER (17.5X30X3.5-MM THK) | |
| M | METRIC PART | |||
#SEBP32470903
237-2828: CONTROL GP-JOYSTICK
237-2828 CONTROL GP-JOYSTICK -RIPPER
S/N AKM1-UP; ALY1-UP
PART OF 238-0962 CONTROL AR-PILOT HYDRAULIC
AN ATTACHMENT
S/N AKM1-UP; ALY1-UP
PART OF 238-0962 CONTROL AR-PILOT HYDRAULIC
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-5639 D | SEAL (0.06-M EACH) | ||
| 2. | 230-9136 Y | [1] | CONTROL GP-HANDLE (RIPPER) | |
| 3. | 240-9859 | [1] | PLATE | |
| 4. | 127-2170 M | [8] | SCREW-TRUSS HEAD (M8X1.25X20-MM) | |
| 102-9478 F | [1] | FILM-INSTRUCTION (RIPPER CONTROL) | ||
| (ON PLASTIC COVER WHEN USED ON CAB & ON SHEET METAL WHEN USED ON CANOPY) | ||||
| D | ORDER BY THE METER | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32470904
230-0749: CONTROL GP-PILOT OPERATED HYD
230-0749 CONTROL GP-PILOT OPERATED HYD -BULLDOZER
S/N AKM1-831; ALY1-907
PART OF 236-2078 CONTROL AR-PILOT HYDRAULIC
AN ATTACHMENT
S/N AKM1-831; ALY1-907
PART OF 236-2078 CONTROL AR-PILOT HYDRAULIC
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-3377 J | [1] | WEDGE-RECEPTACLE LOCK (4-PIN) | |
| 2. | 235-0889 Y | [1] | VALVE GP-PILOT (BULLDOZER) | |
| 3. | 238-8262 Y | [1] | CONTROL GP-HANDLE (BULLDOZER) | |
| 4. | 127-2170 M | [4] | SCREW-TRUSS HEAD (M8X1.25X20-MM) | |
| 5. | 102-8804 J | [1] | KIT-RECEPTACLE (4-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 6. | 4B-9808 | [2] | SETSCREW (1/4-20X0.5-IN) | |
| 7. | 9X-2044 M | [2] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 8. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| J | KIT MARKED J INCLUDES PART(S) MARKED J | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32470905
230-0749: CONTROL GP-PILOT OPERATED HYD
230-0749 CONTROL GP-PILOT OPERATED HYD -BULLDOZER
S/N AKM1235-UP; ALY1335-UP
PART OF 236-2078 CONTROL AR-PILOT HYDRAULIC
ALSO AN ATTACHMENT
S/N AKM1235-UP; ALY1335-UP
PART OF 236-2078 CONTROL AR-PILOT HYDRAULIC
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP32470906
238-9556: CONTROL GP-PILOT OPERATED HYD
238-9556 CONTROL GP-PILOT OPERATED HYD -BULLDOZER
S/N AKM1-831; ALY1-907
PART OF 233-0272 GRADE CONTROL AR-LASER
FOR USE WITH ENCLOSED ROPS
AN ATTACHMENT
S/N AKM1-831; ALY1-907
PART OF 233-0272 GRADE CONTROL AR-LASER
FOR USE WITH ENCLOSED ROPS
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-3389 J | [1] | WEDGE-RECEPTACLE LOCK (8-PIN) | |
| 2. | 208-6070 Y | [1] | CONTROL GP-HANDLE (BULLDOZER) | |
| 3. | 225-2625 Y | [1] | MOUNTING GP-MONITOR (GRADE CONTROL) | |
| 4. | 245-7725 | [1] | FILM-IDENTIFICATION (JOYSTICK)(AUTOMATIC BLADE) | |
| 5. | 102-8806 J | [1] | KIT-RECEPTACLE (8-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| J | KIT MARKED J CONTAINS PART MARKED J | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32470907
238-9556: CONTROL GP-PILOT OPERATED HYD
238-9556 CONTROL GP-PILOT OPERATED HYD -BULLDOZER
S/N AKM832-UP; ALY908-UP
PART OF 233-0272 GRADE CONTROL AR-LASER
FOR USE WITH ENCLOSED ROPS
AN ATTACHMENT
S/N AKM832-UP; ALY908-UP
PART OF 233-0272 GRADE CONTROL AR-LASER
FOR USE WITH ENCLOSED ROPS
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 225-2624 C | [1] | PLATE | |
| 2. | 229-6138 C | [2] | FASTENER | |
| 3. | 240-9653 CY | [1] | VALVE GP-PILOT (JOYSTICK)(BULLDOZER CONTROL) | |
| 4. | 245-7725 | [1] | FILM-IDENTIFICATION (JOYSTICK)(AUTOMATIC BLADE) | |
| 5. | 258-6383 C | [1] | BRACKET AS | |
| 6. | 258-6385 | [1] | BRACKET AS (ANTENNA) | |
| 7. | 096-3772 CM | [2] | SCREW-MACHINE (M4X0.7X16-MM) | |
| 8. | 198-4766 C | [1] | WASHER-HARD (11X25X10-MM THK) | |
| 9. | 3B-4502 C | [2] | LOCKWASHER | |
| 10. | 4P-7581 | [1] | CLIP (LADDER) | |
| 11. | 5C-8312 CM | [2] | NUT (M4X0.7-THD) | |
| 12. | 8T-0328 C | [2] | WASHER-HARD (5.5X10X1-MM THK) | |
| 13. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 14. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| 15. | 8T-4224 C | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 16. | 8T-7547 CM | [1] | BOLT (M8X1.25X30-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32470908
238-9557: CONTROL GP-PILOT OPERATED HYD
238-9557 CONTROL GP-PILOT OPERATED HYD -BULLDOZER
S/N AKM1-831; ALY1-907
PART OF 233-0275 GRADE CONTROL AR-LASER
FOR USE WITH OPEN ROPS
AN ATTACHMENT
S/N AKM1-831; ALY1-907
PART OF 233-0275 GRADE CONTROL AR-LASER
FOR USE WITH OPEN ROPS
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 2. | 208-6070 Y | [1] | CONTROL GP-HANDLE (BULLDOZER) | |
| 3. | 241-9914 | [1] | PLATE | |
| 4. | 245-7725 | [1] | FILM-IDENTIFICATION (JOYSTICK)(AUTOMATIC BLADE) | |
| 5. | 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 6. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 7. | 8T-7547 M | [2] | BOLT (M8X1.25X30-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32470909
238-9557: CONTROL GP-PILOT OPERATED HYD
238-9557 CONTROL GP-PILOT OPERATED HYD -BULLDOZER
S/N AKM832-UP; ALY908-UP
PART OF 233-0275 GRADE CONTROL AR-LASER
FOR USE WITH OPEN ROPS
AN ATTACHMENT
S/N AKM832-UP; ALY908-UP
PART OF 233-0275 GRADE CONTROL AR-LASER
FOR USE WITH OPEN ROPS
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 229-6138 | [2] | FASTENER | |
| 2. | 240-9653 CY | [1] | VALVE GP-PILOT (JOYSTICK)(BULLDOZER) | |
| 3. | 245-7725 | [1] | FILM-IDENTIFICATION (JOYSTICK)(AUTOMATIC BLADE) | |
| 4. | 258-6384 | [1] | BRACKET AS | |
| 5. | 258-6386 | [1] | BRACKET AS (ANTENNA) | |
| 6. | 096-3772 M | [2] | SCREW-MACHINE (M4X0.7X16-MM) | |
| 7. | 3B-4502 | [2] | LOCKWASHER | |
| 8. | 4P-7581 | [1] | CLIP (LADDER) | |
| 9. | 5C-8312 M | [2] | NUT (M4X0.7-THD) | |
| 10. | 8T-0328 | [2] | WASHER-HARD (5.5X10X1-MM THK) | |
| 11. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 12. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| 13. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 14. | 8T-7547 M | [2] | BOLT (M8X1.25X30-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
