WORK TOOLS
BLADE GPWORK TOOLS
BLADE GP
#SEBP32471090
257-8135: BLADE GP-ANGLING
257-8135 BLADE GP-ANGLING
S/N B6F1-UP; ALY3058-UP
FOLDABLE
PART OF 262-9872 BULLDOZER AR-PWR ANGLE & TILT
Type 1
FOR USE WITH FINE GRADING AR, GRADE CONTROL AR
AN ATTACHMENT
S/N B6F1-UP; ALY3058-UP
FOLDABLE
PART OF 262-9872 BULLDOZER AR-PWR ANGLE & TILT
Type 1
FOR USE WITH FINE GRADING AR, GRADE CONTROL AR
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8G-7703 | [2] | BODY-VALVE | |
| 2. | 8G-7707 | [2] | ORIFICE | |
| 3. | 335-3861 I | [2] | HOSE AS | |
| 4. | 345-7445 Y | [1] | BLADE GP-ANGLING (FOLDABLE) | |
| 5. | 326-0307 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 326-0306 | [1] | CONNECTOR | ||
| 7J-9108 | [1] | SEAL-O-RING | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 6. | 3D-2824 | [2] | SEAL-O-RING | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32471091
257-8135: BLADE GP-ANGLING
257-8135 BLADE GP-ANGLING
S/N B6F1-UP; ALY3058-UP
FOLDABLE
PART OF 262-9872 BULLDOZER AR-PWR ANGLE & TILT
Type 2
FOR USE WITH FINE GRADING AR, GRADE CONTROL AR
AN ATTACHMENT
S/N B6F1-UP; ALY3058-UP
FOLDABLE
PART OF 262-9872 BULLDOZER AR-PWR ANGLE & TILT
Type 2
FOR USE WITH FINE GRADING AR, GRADE CONTROL AR
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 345-7445 Y | [1] | BLADE GP-ANGLING (FOLDABLE) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32471092
257-8155: BLADE GP-ANGLING
257-8155 BLADE GP-ANGLING
S/N DPM1-UP; ALY1-3033
FOLDABLE
PART OF 262-9871 BULLDOZER AR-PWR ANGLE & TILT
FOR USE WITH FINE GRADING AR, GRADE CONTROL AR, LGP
AN ATTACHMENT
S/N DPM1-UP; ALY1-3033
FOLDABLE
PART OF 262-9871 BULLDOZER AR-PWR ANGLE & TILT
FOR USE WITH FINE GRADING AR, GRADE CONTROL AR, LGP
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [4] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 3G-8932 | [4] | PIN | |
| 3. | 4T-0231 | [4] | RETAINER | |
| 4. | 8G-5747 | [4] | SPACER (45X50X15-MM THK) | |
| 5. | 089-8249 | [4] | SPACER (64X72X13-MM THK) | |
| 6. | 104-4817 | [2] | PIN | |
| 7. | 104-7434 | [2] | RETAINER | |
| 8. | 197-6440 | [1] | BEARING | |
| 9. | 257-8113 Y | [1] | BLADE GP-ANGLING | |
| 10. | 257-8150 Y | [1] | EDGE GP-BIT & CUTTING | |
| 11. | 7X-2562 M | [4] | BOLT (M20X2.5X45-MM) | |
| 12. | 8J-8905 | [1] | RING-LOCK | |
| 13. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 14. | 8T-4956 M | [4] | BOLT (M12X1.75X35-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32471093
257-8155: BLADE GP-ANGLING
257-8155 BLADE GP-ANGLING
S/N DPM1-UP; ALY3034-UP
FOLDABLE
PART OF 262-9871 BULLDOZER AR-PWR ANGLE & TILT
Type 1
FOR USE WITH FINE GRADING AR, GRADE CONTROL AR, LGP
AN ATTACHMENT
S/N DPM1-UP; ALY3034-UP
FOLDABLE
PART OF 262-9871 BULLDOZER AR-PWR ANGLE & TILT
Type 1
FOR USE WITH FINE GRADING AR, GRADE CONTROL AR, LGP
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8G-7703 | [2] | BODY-VALVE | |
| 2. | 8G-7707 | [2] | ORIFICE | |
| 3. | 335-3861 I | [2] | HOSE AS | |
| 4. | 345-7446 Y | [1] | BLADE GP-ANGLING | |
| 5. | 326-0307 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 326-0306 | [1] | CONNECTOR | ||
| 7J-9108 | [1] | SEAL-O-RING | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 6. | 3D-2824 | [2] | SEAL-O-RING | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32471094
257-8155: BLADE GP-ANGLING
257-8155 BLADE GP-ANGLING
S/N DPM1-UP; ALY3034-UP
FOLDABLE
PART OF 262-9871 BULLDOZER AR-PWR ANGLE & TILT
Type 2
FOR USE WITH FINE GRADING AR, GRADE CONTROL AR, LGP
AN ATTACHMENT
S/N DPM1-UP; ALY3034-UP
FOLDABLE
PART OF 262-9871 BULLDOZER AR-PWR ANGLE & TILT
Type 2
FOR USE WITH FINE GRADING AR, GRADE CONTROL AR, LGP
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 345-7446 Y | [1] | BLADE GP-ANGLING | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32471095
257-8156: BLADE GP-ANGLING
257-8156 BLADE GP-ANGLING
S/N B6F1-UP; ALY1-3057
FOLDABLE
PART OF 257-8135 BLADE GP-ANGLING
AN ATTACHMENT
S/N B6F1-UP; ALY1-3057
FOLDABLE
PART OF 257-8135 BLADE GP-ANGLING
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4T-0231 | [2] | RETAINER | |
| 2. | 8V-7659 | [2] | PIN AS | |
| 3. | 170-5707 | [4] | LOCKPIN | |
| 4. | 257-0205 | [2] | PIN-DOWEL | |
| 5. | 257-8115 | [1] | BLADE AS (LH) | |
| 6. | 257-8140 | [1] | SUPPORT AS-BLADE | |
| 7. | 257-8157 | [1] | BLADE AS (RH) | |
| 8. | 265-2696 | [2] | LINK AS | |
| 9. | 265-5601 | [2] | PIN | |
| 10. | 5P-1076 | [2] | WASHER-HARD (13.5X30X4-MM THK) | |
| 11. | 7G-8839 | [2] | SPACER (13.5X57X6-MM THK) | |
| 12. | 8T-4183 M | [2] | BOLT (M12X1.75X40-MM) | |
| 13. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 14. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| M | METRIC PART | |||
#SEBP32471096
257-8156: BLADE GP-ANGLING
257-8156 BLADE GP-ANGLING
S/N B6F1-UP; ALY3058-UP
FOLDABLE
PART OF 345-7445 BLADE GP-ANGLING
AN ATTACHMENT
S/N B6F1-UP; ALY3058-UP
FOLDABLE
PART OF 345-7445 BLADE GP-ANGLING
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4T-0231 | [2] | RETAINER | |
| 2. | 8V-7659 | [2] | PIN AS | |
| 3. | 8D-3791 | [4] | PIN | |
| 4. | 257-0205 | [2] | PIN-DOWEL | |
| 5. | 257-8115 | [1] | BLADE AS (LH) | |
| 6. | 257-8140 | [1] | SUPPORT AS-BLADE | |
| 7. | 296-9831 C | [1] | BLADE AS (RH) | |
| 8. | 265-2696 | [2] | LINK AS | |
| 9. | 265-5601 | [2] | PIN | |
| 10. | 5P-1076 | [2] | WASHER-HARD (13.5X30X4-MM THK) | |
| 11. | 7G-8839 | [2] | SPACER (13.5X57X6-MM THK) | |
| 12. | 8T-4183 M | [2] | BOLT (M12X1.75X40-MM) | |
| 13. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 14. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP32471097
345-7445: BLADE GP-ANGLING
345-7445 BLADE GP-ANGLING
S/N B6F1-UP; ALY3058-UP
FOLDABLE
PART OF 257-8135 BLADE GP-ANGLING
Type 1
AN ATTACHMENT
S/N B6F1-UP; ALY3058-UP
FOLDABLE
PART OF 257-8135 BLADE GP-ANGLING
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [4] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 3G-8932 | [4] | PIN | |
| 3. | 4T-0231 | [4] | RETAINER | |
| 4. | 8G-5747 | [4] | SPACER (45X50X15-MM THK) | |
| 5. | 089-8249 | [4] | SPACER (64X72X13-MM THK) | |
| 6. | 104-4817 | [2] | PIN | |
| 7. | 104-7434 | [2] | RETAINER | |
| 8. | 197-6440 | [1] | BEARING | |
| 9. | [1] | PLATE & FILM GP | ||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 8T-7371 | [1] | PLATE-SERIAL NUMBER (BLADE) | ||
| 10. | 257-8150 Y | [1] | EDGE GP-BIT & CUTTING | |
| 11. | 257-8156 Y | [1] | BLADE GP-ANGLING | |
| 12. | 266-9599 | [1] | RETAINER | |
| 13. | 7X-2562 M | [4] | BOLT (M20X2.5X45-MM) | |
| 14. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 8T-4956 M | [4] | BOLT (M12X1.75X35-MM) | |
| 16. | 9X-8271 M | [8] | BOLT-12 POINT HEAD (M10X1.5X45-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32471098
345-7445: BLADE GP-ANGLING
345-7445 BLADE GP-ANGLING
S/N B6F1-UP; ALY3058-UP
FOLDABLE
PART OF 257-8135 BLADE GP-ANGLING
Type 2
AN ATTACHMENT
S/N B6F1-UP; ALY3058-UP
FOLDABLE
PART OF 257-8135 BLADE GP-ANGLING
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 C | [3] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 3G-8932 | [4] | PIN | |
| 3. | 4T-0231 | [4] | RETAINER | |
| 4. | 8G-5747 | [4] | SPACER (45X50X15-MM THK) | |
| 5. | 089-8249 | [4] | SPACER (64X72X13-MM THK) | |
| 6. | 104-4817 | [2] | PIN | |
| 7. | 104-7434 | [2] | RETAINER | |
| 8. | 197-6440 | [1] | BEARING | |
| 9. | [1] | PLATE & FILM GP | ||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 8T-7371 | [1] | PLATE-SERIAL NUMBER (BLADE) | ||
| 10. | 257-8150 Y | [1] | EDGE GP-BIT & CUTTING | |
| 11. | 257-8156 Y | [1] | BLADE GP-ANGLING | |
| 12. | 376-6434 C | [1] | RETAINER | |
| 13. | 7X-2562 M | [4] | BOLT (M20X2.5X45-MM) | |
| 14. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 8T-4956 M | [4] | BOLT (M12X1.75X35-MM) | |
| 16. | 9X-8271 CM | [10] | BOLT-12 POINT HEAD (M10X1.5X45-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32471099
345-7446: BLADE GP-ANGLING
345-7446 BLADE GP-ANGLING
S/N DPM1-UP; ALY3034-UP
PART OF 257-8155 BLADE GP-ANGLING
Type 1
AN ATTACHMENT
S/N DPM1-UP; ALY3034-UP
PART OF 257-8155 BLADE GP-ANGLING
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [4] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 3G-8932 | [4] | PIN | |
| 3. | 4T-0231 | [4] | RETAINER | |
| 4. | 8G-5747 | [4] | SPACER (45X50X15-MM THK) | |
| 5. | 089-8249 | [4] | SPACER (64X72X13-MM THK) | |
| 6. | 104-4817 | [2] | PIN | |
| 7. | 104-7434 | [2] | RETAINER | |
| 8. | 197-6440 | [1] | BEARING | |
| 9. | [1] | PLATE & FILM GP | ||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 8T-7371 | [1] | PLATE-SERIAL NUMBER (BLADE) | ||
| 10. | 257-8150 Y | [1] | EDGE GP-BIT & CUTTING | |
| 11. | 257-8113 Y | [1] | BLADE GP-ANGLING | |
| 12. | 266-9599 | [1] | RETAINER | |
| 13. | 7X-2562 M | [4] | BOLT (M20X2.5X45-MM) | |
| 14. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 8T-4956 M | [4] | BOLT (M12X1.75X35-MM) | |
| 16. | 9X-8271 M | [8] | BOLT-12 POINT HEAD (M10X1.5X45-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
