AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

345-7446 BLADE GP-ANGLING S/N DPM1-UP; ALY3034-UP PART OF 257-8155 BLADE GP-ANGLING Type 2 AN ATTACHMENT D6N


WORK TOOLS
BLADE GP
GROUND ENGAGING TOOLS (G.E.T.)

TRACK-TYPE TRACTOR D6N TRACK-TYPE TRACTOR AKM
 D6N XL, D/S, LGP TRACK-TYPE TRACTOR AKM00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3247 D6N AKM   (2001)

WORK TOOLS

BLADE GP
BLADE GP-ANGLING
345-7445 BLADE GP-ANGLING
BLADE GP-ANGLING
345-7446 BLADE GP-ANGLING
BLADE GP-ANGLING
345-7446 BLADE GP-ANGLING
 

#SEBP32471100
 

345-7446: BLADE GP-ANGLING

345-7446 BLADE GP-ANGLING
S/N DPM1-UP; ALY3034-UP
PART OF 257-8155 BLADE GP-ANGLING
Type 2
AN ATTACHMENT
i04782973 SEBP3247
3457446 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 C [3] FITTING-GREASE (1/8-27 PTF)  
2. 3G-8932 [4] PIN  
3. 4T-0231 [4] RETAINER  
4. 8G-5747 [4] SPACER (45X50X15-MM THK)  
5. 089-8249 [4] SPACER (64X72X13-MM THK)  
6. 104-4817 [2] PIN  
7. 104-7434 [2] RETAINER  
8. 197-6440 [1] BEARING  
9. [1] PLATE & FILM GP  
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  8T-7371 [1] PLATE-SERIAL NUMBER (BLADE)  
10. 257-8150 Y [1] EDGE GP-BIT & CUTTING  
11. 257-8113 Y [1] BLADE GP-ANGLING  
12. 376-6434 C [1] RETAINER  
13. 7X-2562 M [4] BOLT (M20X2.5X45-MM)  
14. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 8T-4956 M [4] BOLT (M12X1.75X35-MM)  
16. 9X-8271 CM [10] BOLT-12 POINT HEAD (M10X1.5X45-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32471101
 

177-4549: EDGE GP-BIT & CUTTING

177-4549 EDGE GP-BIT & CUTTING -POWER ANGLE, TILT BLADE
S/N F6W1-99999; F6Y1-99999
PART OF 223-2260, 226-5426 BLADE GP
AN ATTACHMENT
i01754122 SEBP3247
1774549 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 177-4550 [2] EDGE-CUTTING  
2. 177-4551 [1] BIT-END (RH)  
3. 177-4552 [1] BIT-END (LH)  
4. 2J-3506 [26] NUT-FULL (3/4-10-THD)  
5. 5J-4773 [26] BOLT-PLOW (3/4-10X2.5-IN)  
6. 5P-8248 [26] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP32471102
 

257-0207: EDGE GP-BIT & CUTTING

257-0207 EDGE GP-BIT & CUTTING
S/N B6C1-UP; AKM1-UP; B6Y1-UP
PART OF 257-0210 BLADE GP-ANGLING
FOR USE WITH FOLDABLE BLADE
AN ATTACHMENT
i02322911 SEBP3247
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8E-9379 [1] BIT-END (RH)  
  5J-4773 [22] BOLT-PLOW (3/4-10X2.5-IN)  
  3G-4282 [1] EDGE-CUTTING  
  257-0264 [1] EDGE-CUTTING  
  257-0265 [1] EDGE-CUTTING  
  2J-3506 [22] NUT-FULL (3/4-10-THD)  
  5P-8248 [22] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP32471103
 

257-8150: EDGE GP-BIT & CUTTING

257-8150 EDGE GP-BIT & CUTTING
S/N B6F1-UP; DPM1-UP; ALY1-2102
PART OF 257-8135, 257-8155 BLADE GP-ANGLING
FOR USE WITH FOLDABLE BLADE
AN ATTACHMENT
i02310974 SEBP3247
2578150 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-9378 [1] BIT-END (LH)  
2. 8E-9379 [1] BIT-END (RH)  
3. 257-8153 [1] EDGE-CUTTING  
4. 257-8151 [1] EDGE-CUTTING  
5. 4T-2315 [1] EDGE-CUTTING  
6. 2J-3506 [28] NUT-FULL (3/4-10-THD)  
7. 5J-4773 [28] BOLT-PLOW (3/4-10X2.5-IN)  
8. 5P-8248 [28] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP32471104
 

257-8150: EDGE GP-BIT & CUTTING

257-8150 EDGE GP-BIT & CUTTING
S/N B6F1-UP; DPM1-UP; ALY2103-UP
PART OF 257-8135, 257-8155, 345-7445, 345-7446 BLADE GP-ANGLING
FOR USE WITH FOLDABLE BLADE
AN ATTACHMENT
i02687894 SEBP3247
2578150 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-9378 [1] BIT-END (LH)  
2. 8E-9379 [1] BIT-END (RH)  
3. 278-2168 C [2] EDGE-CUTTING  
4. 278-2169 C [1] EDGE-CUTTING  
5. 278-2170 C [1] EDGE-CUTTING  
6. 2J-3506 [28] NUT-FULL (3/4-10-THD)  
7. 5J-4773 [28] BOLT-PLOW (3/4-10X2.5-IN)  
8. 5P-8248 [28] WASHER-HARD (20X36.5X3.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP32471105
 

3G-4210: EDGE GP-BIT & CUTTING

3G-4210 EDGE GP-BIT & CUTTING -LEVEL CUT
S/N AKM1-UP
19-MM (0.7-IN) THICK. REVERSIBLE
FIELD INSTALLATION
i00364466 SEBP3247
3G4210 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-4282 [2] EDGE-CUTTING  
2. 3G-4285 [2] BIT-END  
3. 2J-3506 [22] NUT-FULL (3/4-10-THD)  
4. 5J-4773 [22] BOLT-PLOW (3/4-10X2.5-IN)  
5. 5P-8248 [22] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP32471106
 

4T-2314: EDGE GP-BIT & CUTTING

4T-2314 EDGE GP-BIT & CUTTING -ANGLING BLADE
S/N G6G1-UP; B6L1-UP; ALY1-UP
PART OF 112-7446, 137-8729, 235-5001 BLADE GP-ANGLING
AN ATTACHMENT
i00375931 SEBP3247
4T2314 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-9378 [1] BIT-END (LH)  
  8E-9379 [1] BIT-END (RH)  
2. 4T-2315 [2] EDGE-CUTTING  
3. 5J-4773 [28] BOLT-PLOW (3/4-10X2.5-IN)  
  2J-3506 [28] NUT-FULL (3/4-10-THD)  
  5P-8248 [28] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP32471107
 

507-2847: EDGE GP-BIT & CUTTING

507-2847 EDGE GP-BIT & CUTTING -GENERAL DUTY
S/N AKM1-UP
FIELD INSTALLATION
i07058483 SEBP3247
5072847 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-4282 [2] EDGE-CUTTING  
2. 140-6787 [1] BIT-END (RH)  
3. 140-6788 [1] BIT-END (LH)  
4. 2J-3506 [22] NUT-FULL (3/4-10-THD)  
5. 5J-4773 [22] BOLT-PLOW (3/4-10X2.5-IN)  
6. 5P-8248 [22] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP32471108
 

507-2848: EDGE GP-BIT & CUTTING

507-2848 EDGE GP-BIT & CUTTING -LEVEL CUT
S/N AKM1-UP
FOR USE WITH SEMI-UNIVERSAL BLADES
FIELD INSTALLATION
i07058315 SEBP3247
5072848 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-6659 [1] EDGE-CUTTING  
2. 9U-8057 [2] EDGE-CUTTING  
3. 323-4279 [1] BIT-END (RH)  
4. 323-4280 [1] BIT-END (LH)  
5. 2J-3506 [23] NUT-FULL (3/4-10-THD)  
6. 5J-4773 [23] BOLT-PLOW (3/4-10X2.5-IN)  
7. 5P-8248 [23] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP32471109
 

507-2849: EDGE GP-BIT & CUTTING

507-2849 EDGE GP-BIT & CUTTING -LEVEL CUT REVERSIBLE
S/N AKM1-UP
SEMI-UNIVERSAL
FOR USE WITH ANGLE BLADE
FIELD INSTALLATION
i06991472 SEBP3247
5072849 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-4285 [2] BIT-END  
2. 4T-6659 [1] EDGE-CUTTING  
3. 9U-8057 [2] EDGE-CUTTING  
4. 2J-3506 [23] NUT-FULL (3/4-10-THD)  
5. 5J-4773 [23] BOLT-PLOW (3/4-10X2.5-IN)  
6. 5P-8248 [23] WASHER-HARD (20X36.5X3.5-MM THK)  
 

Information:

Caterpillar Parts SIS Catalog D6N :

BLADE GP-ANGLING
345-7446 BLADE GP-ANGLING
BLADE GP-ANGLING
345-7445 BLADE GP-ANGLING
BLADE GP-ANGLING
345-7445 BLADE GP-ANGLING
BLADE GP-ANGLING
257-8156 BLADE GP-ANGLING
BLADE GP-ANGLING
257-8156 BLADE GP-ANGLING
BLADE GP-ANGLING
257-8155 BLADE GP-ANGLING
BLADE GP-ANGLING
257-8155 BLADE GP-ANGLING
BLADE GP-ANGLING
257-8155 BLADE GP-ANGLING
EDGE GP-BIT & CUTTING
177-4549 EDGE GP-BIT & CUTTING
257-0207 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
257-8150 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
257-8150 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
3G-4210 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
4T-2314 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2847 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2848 EDGE GP-BIT & CUTTING

Truck sale:

 
 
Caterpillar D6N
- Crawler dozers
WESTERN STATES EQUIPMENT
Caterpillar D6NL AZ2, Crawler dozers, Construction
152,512 
Caterpillar D6NL AZ2, Crawler dozers, Construction
- Crawler dozers
MICHIGAN CAT
Caterpillar D6N, Crawler dozers, Construction
139,000 
Caterpillar D6N, Crawler dozers, Construction
- Crawler dozers
ZIEGLER CAT
 
110,000 
Caterpillar D6N, Crawler dozers, Construction
- Crawler dozers
WESTERN STATES EQUIPMENT
Caterpillar D6N, Crawler dozers, Construction
 
Caterpillar D6N, Crawler dozers, Construction
- Crawler dozers
CGT - COMPAGNIA GENERALE TRATTORI
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.