AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

C-10 Industrial Engine BCX00001-UP FUEL SYSTEM Caterpillar SIS



INDUSTRIAL ENGINE C-10 INDUSTRIAL ENGINE BCX
 C-10 Industrial Engine BCX00001-UP SEBP3251 C-10 BCX   (2000)

Parts group C-10:

  For full view, you need register
FUEL SYSTEM
FILTER GP-FUEL
COVER GP-FUEL FILTER BASE
116-5410 COVER GP-FUEL FILTER BASE
116-5410 COVER GP-FUEL FILTER BASE
PROVIDES COVER AND SEAL WHEN NO PRIMING PUMP IS REQUIRED
FOR USE WITH METRIC FUEL FILTER BASE, FUEL FILTER GPS
CANNOT BE USED WITH FUEL PRIMING PUMPS
AN ATTACHMENT
FILTER GP-FUEL
116-5436 FILTER GP-FUEL
116-5436 FILTER GP-FUEL
ADVANCED EFFICIENCY
ALSO AN ATTACHMENT
FILTER GP-FUEL
178-0165 FILTER GP-FUEL
178-0165 FILTER GP-FUEL
CANNOT BE USED WITH REFRIGERANT COMPRESSOR MOUNTING, FUEL SUPPLY FITTING
AN ATTACHMENT
FILTER GP-PRIMARY FUEL
177-7765 FILTER GP-PRIMARY FUEL
177-7765 FILTER GP-PRIMARY FUEL
FOR USE WITH REFRIGERANT COMPRESSOR MOUNTING
CANNOT BE USED WITH FUEL SUPPLY FITTING
AN ATTACHMENT
FILTER GP-SECONDARY FUEL
116-5413 FILTER GP-SECONDARY FUEL
116-5413 FILTER GP-SECONDARY FUEL
ADVANCED EFFICIENCY
ALSO AN ATTACHMENT
FILTER GP-WATER SEP & FUEL
133-5671 FILTER GP-WATER SEP & FUEL
133-5671 FILTER GP-WATER SEP & FUEL
PART OF 178-0165 FILTER GP-FUEL, 177-7765 FILTER GP-PRIMARY FUEL
ALSO AN ATTACHMENT
FILTER GP-WATER SEP & FUEL
174-9570 FILTER GP-WATER SEP & FUEL
174-9570 FILTER GP-WATER SEP & FUEL
PART OF 183-5876 FILTER GP-WATER SEP & FUEL
AN ATTACHMENT
FILTER GP-WATER SEP & FUEL
183-5876 FILTER GP-WATER SEP & FUEL
183-5876 FILTER GP-WATER SEP & FUEL -WITH BASE
MULTIPLE PORTING, PRIMARY
AN ATTACHMENT
FILTER GP-WATER SEP & FUEL
459-3810 FILTER GP-WATER SEP & FUEL
459-3810 FILTER GP-WATER SEP & FUEL
FIELD REPLACEMENT FOR @@@@@8N-0940@@@@@
FIELD INSTALLATION
VALVE GP-CHECK
233-6742 VALVE GP-CHECK
233-6742 VALVE GP-CHECK -FUEL
S/N BCX1-3170
PART OF 165-0629, 165-0630, 189-4674, 189-4675, 189-4677, 197-5965, 246-7090 LINES GP-FUEL INJECTION
ALSO AN ATTACHMENT
VALVE GP-CHECK
233-6742 VALVE GP-CHECK
233-6742 VALVE GP-CHECK -FUEL
S/N BCX3171-UP
PART OF 165-0629, 165-0630, 189-4674, 189-4675, 189-4677, 197-5965, 246-7090 LINES GP-FUEL INJECTION
ALSO AN ATTACHMENT
VALVE GP-CHECK
238-0296 VALVE GP-CHECK
238-0296 VALVE GP-CHECK -FUEL
S/N BCX1-3170
PART OF 233-6742 VALVE GP-CHECK
ALSO AN ATTACHMENT
VALVE GP-CHECK
281-2725 VALVE GP-CHECK
281-2725 VALVE GP-CHECK -FUEL
PART OF 233-6742 VALVE GP-CHECK
ALSO AN ATTACHMENT
LINES GP-FUEL
COOLER GP-FUEL
174-5637 COOLER GP-FUEL
174-5637 COOLER GP-FUEL
FOR USE WITH @@@@@159-2596@@@@@
AN ATTACHMENT
FITTING GP-FUEL LINES
116-5407 FITTING GP-FUEL LINES
116-5407 FITTING GP-FUEL LINES
3/4-16X45 DEGREE FLARE-#8-90 DEGREE CONNECTOR
AN ATTACHMENT
FITTING GP-FUEL LINES
116-5419 FITTING GP-FUEL LINES
116-5419 FITTING GP-FUEL LINES
3/4-16X45 DEGREE FLARE- #8 STRAIGHT CONNECTOR
AN ATTACHMENT
FITTING GP-FUEL LINES
116-5420 FITTING GP-FUEL LINES
116-5420 FITTING GP-FUEL LINES
7/8-14X45-DEG FLARE, 90-DEG ELBOW. #10 FUEL SUPPLY CONNECTION
AN ATTACHMENT
FITTING GP-FUEL LINES
116-5437 FITTING GP-FUEL LINES
116-5437 FITTING GP-FUEL LINES
7/8-14X37 DEGREE FLARE, 45 DEGREE ELBOW
FOR USE WITH DUAL SEAT HOSE ENDS
AN ATTACHMENT
FITTING GP-FUEL LINES
117-0183 FITTING GP-FUEL LINES
117-0183 FITTING GP-FUEL LINES
NUMBER 10 STRAIGHT FUEL INLET FITTING WITHOUT BLEED AND HAS 7/8-14X45-DEG FLARE
ALSO AN ATTACHMENT
FITTING GP-FUEL LINES
117-0184 FITTING GP-FUEL LINES
117-0184 FITTING GP-FUEL LINES
5/8-18X45 DEG FLARE-#6 STRAIGHT CONNECTOR
ALSO AN ATTACHMENT
FITTING GP-FUEL LINES
159-0645 FITTING GP-FUEL LINES
159-0645 FITTING GP-FUEL LINES
9/16-18THD, STRAIGHT CONNECTION
AN ATTACHMENT
FITTING GP-FUEL LINES
165-1717 FITTING GP-FUEL LINES
165-1717 FITTING GP-FUEL LINES
37 DEGREE
AN ATTACHMENT
FITTING GP-FUEL LINES
165-2020 FITTING GP-FUEL LINES
165-2020 FITTING GP-FUEL LINES
37 DEGREE. FUEL SUPPLY
AN ATTACHMENT
LINES GP-FLEXIBLE FUEL
125-0032 LINES GP-FLEXIBLE FUEL
125-0032 LINES GP-FLEXIBLE FUEL
MALE CONNECTORS
AN ATTACHMENT
PLUG GP-FUEL LINES
123-0782 PLUG GP-FUEL LINES
123-0782 PLUG GP-FUEL LINES
FUEL BLEED LOCATION ON FUEL ADAPTER
CANNOT BE USED WITH @@@@@123-0783@@@@@
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
INJECTOR GP-FUEL
170-5252 INJECTOR GP-FUEL
170-5252 INJECTOR GP-FUEL
S/N BCX1-699
PART OF 189-0351 PUMP GP-FUEL INJECTION
INJECTOR GP-FUEL
203-7685 INJECTOR GP-FUEL
203-7685 INJECTOR GP-FUEL
S/N BCX700-UP
PART OF 189-0351 PUMP GP-FUEL INJECTION
INJECTOR GP-FUEL
212-3467 INJECTOR GP-FUEL
212-3467 INJECTOR GP-FUEL
PART OF 176-5829 PUMP GP-FUEL INJECTION
OPTIONAL FIELD REPLACEMENT ORDER @@@@@236-4086@@@@@
INJECTOR GP-FUEL
236-4086 INJECTOR GP-FUEL
236-4086 INJECTOR GP-FUEL
FOR USE WITH UNDERGROUND MINING APPLICATIONS
FIELD INSTALLATION
INJECTOR GP-FUEL
350-7555 INJECTOR GP-FUEL
350-7555 INJECTOR GP-FUEL
S/N BCX700-UP
PART OF 189-0351 PUMP GP-FUEL INJECTION
LINES GP-FUEL INJECTION
165-0629 LINES GP-FUEL INJECTION
165-0629 LINES GP-FUEL INJECTION
FOR USE WITH REMOTE FUEL FILTER-750MM LINES
AN ATTACHMENT
LINES GP-FUEL INJECTION
165-0630 LINES GP-FUEL INJECTION
165-0630 LINES GP-FUEL INJECTION
PROVIDES LINES 1083MM IN LENGTH AND BASE FOR REMOTE FUEL FILTER LOCATION
FOR USE WITH 4 CYLINDER AIR COMPRESSOR
AN ATTACHMENT
LINES GP-FUEL INJECTION
189-4674 LINES GP-FUEL INJECTION
189-4674 LINES GP-FUEL INJECTION
PROVIDES REMOTE FUEL FILTER LINES 1083MM IN LENGTH
FOR USE WITH FUEL COOLED ADEM III
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
189-4675 LINES GP-FUEL INJECTION
189-4675 LINES GP-FUEL INJECTION
PROVIDES REMOTE FUEL FILTER LINES 750MM IN LENGTH
FOR USE WITH FUEL COOLED ADEM III
AN ATTACHMENT
LINES GP-FUEL INJECTION
189-4677 LINES GP-FUEL INJECTION
189-4677 LINES GP-FUEL INJECTION
PROVIDES REMOTE FUEL FILTER LINES 1083MM IN LENGTH
FOR USE WITH FUEL COOLED ADEM III
AN ATTACHMENT
LINES GP-FUEL INJECTION
197-5965 LINES GP-FUEL INJECTION
197-5965 LINES GP-FUEL INJECTION
6.5 LITERS PER MINUTE FLOW RATE. HIGH EFFICIENCY FILTER
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
246-7090 LINES GP-FUEL INJECTION
246-7090 LINES GP-FUEL INJECTION -RAIL MOUNT FILTER
AN ATTACHMENT
PUMP GP-FUEL INJECTION
INJECTOR GP-FUEL
170-5252 INJECTOR GP-FUEL
170-5252 INJECTOR GP-FUEL
S/N BCX1-699
PART OF 189-0351 PUMP GP-FUEL INJECTION
INJECTOR GP-FUEL
203-7685 INJECTOR GP-FUEL
203-7685 INJECTOR GP-FUEL
S/N BCX700-UP
PART OF 189-0351 PUMP GP-FUEL INJECTION
INJECTOR GP-FUEL
212-3467 INJECTOR GP-FUEL
212-3467 INJECTOR GP-FUEL
PART OF 176-5829 PUMP GP-FUEL INJECTION
OPTIONAL FIELD REPLACEMENT ORDER @@@@@236-4086@@@@@
INJECTOR GP-FUEL
236-4086 INJECTOR GP-FUEL
236-4086 INJECTOR GP-FUEL
FOR USE WITH UNDERGROUND MINING APPLICATIONS
FIELD INSTALLATION
INJECTOR GP-FUEL
350-7555 INJECTOR GP-FUEL
350-7555 INJECTOR GP-FUEL
S/N BCX700-UP
PART OF 189-0351 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
176-5829 PUMP GP-FUEL INJECTION
176-5829 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
189-0351 PUMP GP-FUEL INJECTION
189-0351 PUMP GP-FUEL INJECTION
S/N BCX1-699
PUMP GP-FUEL INJECTION
189-0351 PUMP GP-FUEL INJECTION
189-0351 PUMP GP-FUEL INJECTION
S/N BCX700-3584
PUMP GP-FUEL INJECTION
189-0351 PUMP GP-FUEL INJECTION
189-0351 PUMP GP-FUEL INJECTION
S/N BCX3585-UP
WIRING GP-UNIT INJECTOR
117-2760 WIRING GP-UNIT INJECTOR
117-2760 WIRING GP-UNIT INJECTOR
WIRING GP-UNIT INJECTOR
257-4183 WIRING GP-UNIT INJECTOR
257-4183 WIRING GP-UNIT INJECTOR
FOR USE AS SERVICE REPAIR FOR INJECTOR HARNESSES WITH THE 7E-6513 CONNECTOR
FIELD INSTALLATION
PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
116-5411 PUMP GP-FUEL PRIMING
116-5411 PUMP GP-FUEL PRIMING -HAND
ALSO AN ATTACHMENT
PUMP GP-FUEL PRIMING
116-5412 PUMP GP-FUEL PRIMING
116-5412 PUMP GP-FUEL PRIMING
FORWARD MOUNT
AN ATTACHMENT
PUMP GP-FUEL TRANSFER
PUMP & MTG GP-FUEL TRANSFER
116-5428 PUMP & MTG GP-FUEL TRANSFER
116-5428 PUMP & MTG GP-FUEL TRANSFER
S/N BCX1-136
PUMP & MTG GP-FUEL TRANSFER
116-5428 PUMP & MTG GP-FUEL TRANSFER
116-5428 PUMP & MTG GP-FUEL TRANSFER
SEPARATOR GP-WATER
FILTER GP-WATER SEP & FUEL
133-5671 FILTER GP-WATER SEP & FUEL
133-5671 FILTER GP-WATER SEP & FUEL
PART OF 178-0165 FILTER GP-FUEL, 177-7765 FILTER GP-PRIMARY FUEL
ALSO AN ATTACHMENT
FILTER GP-WATER SEP & FUEL
174-9570 FILTER GP-WATER SEP & FUEL
174-9570 FILTER GP-WATER SEP & FUEL
PART OF 183-5876 FILTER GP-WATER SEP & FUEL
AN ATTACHMENT
FILTER GP-WATER SEP & FUEL
183-5876 FILTER GP-WATER SEP & FUEL
183-5876 FILTER GP-WATER SEP & FUEL -WITH BASE
MULTIPLE PORTING, PRIMARY
AN ATTACHMENT
FILTER GP-WATER SEP & FUEL
459-3810 FILTER GP-WATER SEP & FUEL
459-3810 FILTER GP-WATER SEP & FUEL
FIELD REPLACEMENT FOR @@@@@8N-0940@@@@@
FIELD INSTALLATION
SEPARATOR GP-WATER
8N-0940 SEPARATOR GP-WATER
8N-0940 SEPARATOR GP-WATER
PRIMARY 10 MICRON FILTER/WATER SEPARATOR, USE ON SUCTION SIDE OF TRANSFER PUMP WITH 1/2 INCH HOSE
FIELD REPLACEMENT ORDER @@@@@459-3810@@@@@
AN ATTACHMENT
COOLER GP
COOLER GP-FUEL
174-5637 COOLER GP-FUEL
174-5637 COOLER GP-FUEL
FOR USE WITH @@@@@159-2596@@@@@
AN ATTACHMENT

Information:

(For parts list, see above)

Engine News
A New Check Valve is Available for the Fuel Filter Base {1262}
2006/08/21
New Fuel Check Valve {1262}
2003/10/01
Improved Seal on Fuel Filter {1261}
2007/07/30
New Primary Fuel Filters are Now Available {1261, 1263}
2008/06/30
A New Torque Is Used for Installing the Check Valve Gp into the Secondary Fuel Filter Base on Certain Commercial Engines {1261, 1274, 5067}
2010/04/16
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
Operation and Maintenance Manual
Fuel System Secondary Filter - Replace
C-10 and C-12 Engines
Fuel System Primary Filter/Water Separator - Drain
C-10 and C-12 Engines
Fuel System Primary Filter (Water Separator) Element - Replace
C-10 and C-12 Engines
Special Instruction
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
A New Torque Value Is Used for the Fuel Pressure Regulator Valves on Certain Diesel Engines{1251, 1262, 1274}
A New Torque Value Is Used for the Fuel Pressure Regulator Valves on Certain Diesel Engines{1251, 1262, 1274}
Technical Information Bulletin
Correct Usage of the 137-5541 Fuel Priming Pump As {1258, 1261}
Correct Usage of the 137-5541 Fuel Priming Pump As {1258, 1261}
Specifications
Fuel Filter and Water Separator
C-10 and C-12 Industrial Engines
Fuel Priming Pump and Primary Fuel Filter
C-10 and C-12 Industrial Engines
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Troubleshooting
E006 Fuel Filter Restriction Shutdown
C-10, C-12, C-15 and C-16 Industrial Engines
E005 Fuel Filter Restriction Derate
C-10, C-12, C-15 and C-16 Industrial Engines
E095 Fuel Filter Restriction Warning
C-10, C-12, C-15 and C-16 Industrial Engines
Disassembly and Assembly
Fuel Filter Base - Remove
C-10 and C-12 Industrial Engines
Fuel Filter Base - Install
C-10 and C-12 Industrial Engines
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Technical Information Bulletin
Lack Of Power, Engine Speed Does Not Return To Rated Or High Idle Speed
Lack Of Power, Engine Speed Does Not Return To Rated Or High Idle Speed
Lack Of Power, Engine Speed Does Not Return To Rated Or High Idle Speed
Lack Of Power, Engine Speed Does Not Return To Rated Or High Idle Speed
Engine News
A New Torque Is Used for Installing the Check Valve Gp into the Secondary Fuel Filter Base on Certain Commercial Engines {1261, 1274, 5067}
2010/04/16
A Two Piece Clip and Grommet for the Fuel Lines Are Now Used On Certain Commercial Engines {1250, 1250, 7553}
2013/08/30
Operation and Maintenance Manual
Standard Torque for Worm Drive Band Hose Clamps
C-10 and C-12 Engines
Special Instruction
A New Torque Value Is Used for the Fuel Pressure Regulator Valves on Certain Diesel Engines{1251, 1262, 1274}
A New Torque Value Is Used for the Fuel Pressure Regulator Valves on Certain Diesel Engines{1251, 1262, 1274}
Specifications
Standard Torque for Worm Drive Band Hose Clamps
C-10 and C-12 Engines
Disassembly and Assembly
Fuel Manifold - Remove
C-10 and C-12 Industrial Engines
Fuel Manifold - Install
C-10 and C-12 Industrial Engines
Engine News
Replacing Lifters for the Unit Injectors {1209, 1290}
2006/06/12
Technical Information Bulletin
The Valve Body May Crack on Certain Remanufactured Fuel Injectors{1290}
The Valve Body May Crack on Certain Remanufactured Fuel Injectors{1290}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Magazine
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Engine News
The Procedure For Tightening The Clamping Bolt For The Unit Injector Has Changed {1250, 1290}
2002/11/01
Operation and Maintenance Manual
Hoses and Clamps - Inspect/Replace
C-10 and C-12 Engines
Fuel System - Prime
C-10 and C-12 Engines
Technical Information Bulletin
Lack Of Power, Engine Speed Does Not Return To Rated Or High Idle Speed
Lack Of Power, Engine Speed Does Not Return To Rated Or High Idle Speed
Engine News
Replace the Fuel Injector Hold-Down Bolt When You Service the Electronic Unit Injectors on Engines, Including Remanufactured Engines with Serial Number Prefix 3LZ, AKB, ALS or R1D {1251, 1254}
2006/04/03
Improved O-Ring Seals for Fuel Injectors for Longer Seal Life {1254}
2003/10/01
Replace the Fuel Injector Hold-Down Bolt When You Service the Electronic Unit Injectors on Engines, Including Remanufactured Engines with Serial Number Prefix 3LZ, AKB, ALS or R1D {1251, 1254}
2006/04/03
Replacing Lifters for the Unit Injectors {1209, 1290}
2006/06/12
Cat Reman Is Announcing an Appearance Change to the EI550 Classic, Bridge, and ACERT Electronic Unit Injectors for Certain Commercial Engines {1290}
2015/06/05
Operation and Maintenance Manual
Electronic Unit Injector - Inspect/Adjust
C-10 and C-12 Engines
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Technical Information Bulletin
Lack Of Power, Engine Speed Does Not Return To Rated Or High Idle Speed
Lack Of Power, Engine Speed Does Not Return To Rated Or High Idle Speed
The Valve Body May Crack on Certain Remanufactured Fuel Injectors{1290}
The Valve Body May Crack on Certain Remanufactured Fuel Injectors{1290}
Specifications
Electronic Unit Injector Wiring
C-10 and C-12 Industrial Engines
Electronic Unit Injector Mechanism
C-10 and C-12 Industrial Engines
Electronic Unit Injector
C-10 and C-12 Industrial Engines
Information Release Memo
REMANUFACTURED FUEL INJECTORS FOR VARIOUS INDUSTRIAL, MACHINE, AND ON-HIGHWAY TRUCK APPLICATIONS-ADDENDUM
REMANUFACTURED FUEL INJECTORS FOR VARIOUS INDUSTRIAL, MACHINE, AND ON-HIGHWAY TRUCK APPLICATIONS-ADDENDUM
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Electronic Unit Injector - Adjust
C-10 and C-12 Industrial Engines
Electronic Unit Injector - Test
C-10 and C-12 Industrial Engines
Troubleshooting
Injector Solenoid Circuit - Test
C-10, C-12, C-15 and C-16 Industrial Engines
Injector Code - Calibrate
C-10, C-12, C-15 and C-16 Industrial Engines
CID 0001 FMI 11 Cylinder #1 Injector fault
C-10, C-12, C-15 and C-16 Industrial Engines
CID 0002 FMI 11 Cylinder #2 Injector fault
C-10, C-12, C-15 and C-16 Industrial Engines
CID 0003 FMI 11 Cylinder #3 Injector fault
C-10, C-12, C-15 and C-16 Industrial Engines
CID 0004 FMI 11 Cylinder #4 Injector fault
C-10, C-12, C-15 and C-16 Industrial Engines
CID 0005 FMI 11 Cylinder #5 Injector fault
C-10, C-12, C-15 and C-16 Industrial Engines
CID 0006 FMI 11 Cylinder #6 Injector fault
C-10, C-12, C-15 and C-16 Industrial Engines
Disassembly and Assembly
Electronic Unit Injector - Remove
C-10 and C-12 Industrial Engines
Electronic Unit Injector - Install
C-10 and C-12 Industrial Engines
Service Magazine
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Engine News
Replacement of the Priming Pump {1258}
2007/11/05
An Improved Fuel Priming Pump Gasket Is Now Used on Certain Commercial Engines {1258, 7555}
2011/06/08
Operation and Maintenance Manual
Fuel System - Prime
C-10 and C-12 Engines
Special Instruction
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR INSTALLING A HAND PRIMING FUEL PUMP ON CERTAIN C7, C9, C10, C11, C12, C13, C15, C16, C18, C30, C32, E90 3126, 3176, 3196, 3456, 3406, G3406, 3408 AND 3412 ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING A HAND PRIMING FUEL PUMP ON CERTAIN C7, C9, C10, C11, C12, C13, C15, C16, C18, C30, C32, E90 3126, 3176, 3196, 3456, 3406, G3406, 3408 AND 3412 ENGINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Inspect the Check Valve in the Fuel Filter Base if You Have Starting Problems or if the Engine Runs Rough
Inspect the Check Valve in the Fuel Filter Base if You Have Starting Problems or if the Engine Runs Rough
Faulty Fuel Priming Pumps on Various Engines
Faulty Fuel Priming Pumps on Various Engines
Correct Usage of the 137-5541 Fuel Priming Pump As {1258, 1261}
Correct Usage of the 137-5541 Fuel Priming Pump As {1258, 1261}
Specifications
Fuel Priming Pump and Primary Fuel Filter
C-10 and C-12 Industrial Engines
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR INSTALLING A HAND PRIMING FUEL PUMP ON CERTAIN C7, C9, C10, C11, C12, C13, C15, C16, C18, C30, C32, E90 3126, 3176, 3196, 3456, 3406, G3406, 3408 AND 3412 ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING A HAND PRIMING FUEL PUMP ON CERTAIN C7, C9, C10, C11, C12, C13, C15, C16, C18, C30, C32, E90 3126, 3176, 3196, 3456, 3406, G3406, 3408 AND 3412 ENGINES
Service Letter-Asia
Service Letter-APD
Testing and Adjusting
Fuel System - Prime
C-10 and C-12 Industrial Engines
Disassembly and Assembly
Fuel Priming Pump - Remove and Install
C-10 and C-12 Industrial Engines
Service Magazine
Special Instruction, REHS1037 , "Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System" has been Revised {1258}
2004/03/29
Engine News
A New Mounting Gasket for the Fuel Transfer Pump is Available {1256}
2004/10/01
A New Fuel Transfer Pump Has Been Released {1256}
2005/05/23
A New Fuel Transfer Pump Is Now Available for Certain C11 through C18 Industrial Engines {1256}
2014/08/01
Special Instruction
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Technical Information Bulletin
Lack Of Power, Engine Speed Does Not Return To Rated Or High Idle Speed
Lack Of Power, Engine Speed Does Not Return To Rated Or High Idle Speed
Specifications
Fuel Transfer Pump
C-10 and C-12 Industrial Engines
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Testing and Adjusting
Fuel System Pressure - Test
C-10 and C-12 Industrial Engines
Disassembly and Assembly
Fuel Transfer Pump - Remove
C-10 and C-12 Industrial Engines
Fuel Transfer Pump - Install
C-10 and C-12 Industrial Engines
Engine News
New Primary Fuel Filters are Now Available {1261, 1263}
2008/06/30
Operation and Maintenance Manual
Fuel Tank Water and Sediment - Drain
C-10 and C-12 Engines
Fuel System Primary Filter/Water Separator - Drain
C-10 and C-12 Engines
Fuel System Primary Filter (Water Separator) Element - Replace
C-10 and C-12 Engines
Special Instruction
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Specifications
Fuel Filter and Water Separator
C-10 and C-12 Industrial Engines
Operation and Maintenance Manual
Manual Stop Procedure
C-10 and C-12 Engines
Emergency Stopping
C-10 and C-12 Engines
Fuel Tank Water and Sediment - Drain
C-10 and C-12 Engines
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Engine News
New Fuel Check Valve {1262}
2003/10/01
A New Torque Is Used for Installing the Check Valve Gp into the Secondary Fuel Filter Base on Certain Commercial Engines {1261, 1274, 5067}
2010/04/16
Special Instruction
A New Torque Value Is Used for the Fuel Pressure Regulator Valves on Certain Diesel Engines{1251, 1262, 1274}
A New Torque Value Is Used for the Fuel Pressure Regulator Valves on Certain Diesel Engines{1251, 1262, 1274}

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.