AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

197-8820 ALTERNATOR GP-CHARGING 24-VOLT, 95-AMPERE FIELD REPLACEMENT FOR @@@@@ 9X-7803@@@@@ AN ATTACHMENT AND FIELD INSTALLATION C-10


ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING

INDUSTRIAL ENGINE C-10 INDUSTRIAL ENGINE BCX
 C-10 Industrial Engine BCX00001-UP SEBP3251 C-10 BCX   (2000)

ELECTRICAL AND STARTING SYSTEM

ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
132-2156 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
169-3345 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
197-8820 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
236-1904 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
266-7227 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
268-4110 ALTERNATOR GP-CHARGING
 

#SEBP32510470
 

197-8820: ALTERNATOR GP-CHARGING

197-8820 ALTERNATOR GP-CHARGING
24-VOLT, 95-AMPERE
FIELD REPLACEMENT FOR @@@@@ 9X-7803@@@@@
AN ATTACHMENT AND FIELD INSTALLATION
i01691128 SEBP3251
1978820 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your C-10 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 185-2653 [1] FRAME  
2. 5S-7349 [1] BOLT (1/4-20X0.5-IN)  
3. 185-2639 [1] FAN AS  
4. 1H-3244 [1] LOCKWASHER  
5. 185-2645 [1] FRAME  
6. 2K-4821 [1] LOCKNUT (5/8-18-THD)  
7. 5P-8247 [1] WASHER-HARD (17X32X3.5-MM THK)  
8. 228-9657 [1] COVER AS  
9. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
10. 185-2647 [1] GROMMET  
11. 9L-6770 [1] CAP-DUST  
12. 205-0626 [1] STATOR AS-ALTERNATOR  
13. 185-2638 [2] COLLAR  
14. 185-2654 [1] PLATE  
15. 185-2650 [1] ROTOR AS  
16. 185-2644 [1] COIL AS  
17. 185-2648 [1] REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR)  
18. 6V-8189 [1] NUT (5/16-18-THD)  
19. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
20. 3F-9556 [1] LOCKWASHER  
21. 185-2655 [1] KIT-BEARING (ALTERNATOR)  
    (INCLUDES BEARINGS)
22. 199-8436 [1] KIT-TERMINAL (ALTERNATOR AIR)  
    (INCLUDES HOLDER AS, PLATE, INSULATOR, PIN, BOLTS, GROMMET & NUTS)
23. 199-7891 [1] KIT-TERMINAL (ALTERNATOR AIR)  
    (INCLUDES INSULATORS, WASHERS & NUTS)
24. 185-2658 [1] KIT-HARDWARE (ALTERNATOR AIR)  
    (INCLUDES BOLTS)
 

#SEBP32510471
 

236-1904: ALTERNATOR GP-CHARGING

236-1904 ALTERNATOR GP-CHARGING
S/N BCX1386-UP
12 VOLT - 160 AMPERE
i01970622 SEBP3251
2361904 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your C-10 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 126-8240 [1] SUPPORT-ALTERNATOR  
2. 268-4110 Y [1] ALTERNATOR GP-CHARGING  
3. 0S-1621 [2] BOLT (1/2-13X1-IN)  
4. 2Y-5829 M [3] NUT (M10X1.5-THD)  
5. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
6. 6V-3822 M [3] BOLT (M10X1.5X35-MM)  
7. 6V-5839 [6] WASHER (11X21X2.5-MM THK)  
8. 6V-8149 M [1] NUT (M12X1.75-THD)  
9. 8T-0162 M [1] BOLT (M12X1.75X160-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32510472
 

266-7227: ALTERNATOR GP-CHARGING

266-7227 ALTERNATOR GP-CHARGING
S/N BCX1-3568
24-VOLT, 60-AMPERE
FIELD REPLACEMENT FOR @@@@@ 4N-3986@@@@@
i02788059 SEBP3251
2667227 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your C-10 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
2. 1H-3244 [1] LOCKWASHER  
3. 6V-8187 [1] NUT (1/4-28-THD)  
4. 292-3815 [2] KIT-TERMINAL  
5. 9L-6770 [1] CAP-DUST  
6. 5P-3418 [1] BEARING-ROLLER  
7. 5P-3419 [1] RACE-BEARING INNER  
8. 291-8247 [1] RECTIFIER AS  
9. 202-2708 [1] DIODE AS  
10. 3T-6354 [1] REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR)  
11. 291-8253 [1] CAPACITOR AS  
12. 202-9897 [1] BEARING-SPECIAL BALL  
13. 100-6531 [1] FAN-ALTERNATOR (11-BLADE)  
14. 187-2034 [1] NUT-FLANGE (5/8-18-THD)  
15. 291-8274 [1] PLATE  
16. 291-8271 [1] HOUSING AS  
17. 202-2700 [1] FRAME  
18. 291-8263 [1] STATOR AS  
19. 6N-1945 [1] COIL AS-FIELD  
20. 9S-2390 [1] RETAINER  
21. 9S-2302 [1] ROTOR AS  
22. 4B-2047 [1] NUT (10-24-THD)  
23. 8T-0328 [1] WASHER-HARD (5.5X10X1-MM THK)  
24. 8F-1434 [1] LOCKWASHER  
25. 202-2784 [1] KIT-ALTERNATOR TERMINAL (OUTPUT)  
    (KIT INCLUDES NUT, WASHERS, INSULATORS, CONNECTORS, ADAPTER, & SCREW)
26. 202-2785 [1] KIT-ALTERNATOR TERMINAL (RELAY)  
    (KIT INCLUDES STUD, BUSHINGS, CONNECTOR, & NUT)
27. 202-2786 [1] KIT-ALTERNATOR TERMINAL (INDICATOR LIGHT)  
    (KIT INCLUDES NUTS, WASHERS, BUSHINGS, & CONNECTOR)
   
  202-2787 F [1] KIT-HARDWARE (ALTERNATOR AIR)  
    (KIT INCLUDES NUTS, SCREWS, WASHER, BOOT, COLLAR, & CONNECTOR)
  F   NOT SHOWN
 

#SEBP32510473
 

268-4110: ALTERNATOR GP-CHARGING

268-4110 ALTERNATOR GP-CHARGING
S/N BCX1386-UP
12-VOLT, 160-AMPREE
PART OF 236-1904 ALTERNATOR GP-CHARGING
i02363855 SEBP3251
2684110 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your C-10 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 198-0971 [1] GUARD  
2. 045-4065 [1] SCREW-MACHINE (10-32X0.75-IN)  
3. 6V-5764 [2] SCREW-MACHINE (10-32X0.625-IN)  
 

#SEBP32510474
 

306-2174: ALTERNATOR GP-CHARGING

306-2174 ALTERNATOR GP-CHARGING
24-VOLT, 150-AMPERE
AN ATTACHMENT
i03017550 SEBP3251
3062174 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your C-10 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 198-0971 [1] GUARD  
2. 045-4065 [1] SCREW-MACHINE (10-32X0.75-IN)  
3. 6V-5764 [2] SCREW-MACHINE (10-32X0.625-IN)  
 

#SEBP32510475
 

316-7251: ALTERNATOR GP-CHARGING

316-7251 ALTERNATOR GP-CHARGING
24-VOLT, 105-AMPERE
FIELD REPLACEMENT FOR @@@@@ 9X-7803@@@@@
FIELD INSTALLATION
i02990030 SEBP3251
3167251 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your C-10 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
2. 1H-3244 [2] LOCKWASHER  
3. 6V-8187 [1] NUT (1/4-28-THD)  
4. 5S-7349 [1] BOLT (1/4-20X0.5-IN)  
5. 9L-6770 [1] CAP-DUST  
6. 231-6133 [1] KIT-BEARING  
  5P-3419 [1] RACE-BEARING INNER  
  229-9407 [1] BEARING AS  
7. 308-1362 [1] RECTIFIER AS  
8. 202-2708 [1] DIODE AS  
9. 3T-6354 [1] REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR)  
10. 202-9897 [1] BEARING-SPECIAL BALL  
11. 100-6531 [1] FAN-ALTERNATOR (11-BLADE)  
12. 187-2034 [1] NUT-FLANGE (5/8-18-THD)  
13. 202-2783 [1] PLATE  
15. 202-2700 [1] FRAME  
16. 308-1365 [1] STATOR AS  
17. 308-1366 [1] COIL AS  
18. 9S-2390 [1] RETAINER  
19. 299-1761 [1] ROTOR AS  
20. 4B-2047 [1] NUT (10-24-THD)  
21. 8T-0328 [1] WASHER-HARD (5.5X10X1-MM THK)  
22. 8F-1434 [1] LOCKWASHER  
23. 202-2784 [1] KIT-ALTERNATOR TERMINAL  
    (INCLUDES NUT, LOCKWASHER, WASHERS, INSULATORS, SCCREW, CONNECTORS, & ADAPTER)
24. 202-2785 [1] KIT-ALTERNATOR TERMINAL  
    (INCLUDES STUD, BUSHINGS, WASHERS, CONNECTOR, & NUT AS)
25. 202-2786 [1] KIT-ALTERNATOR TERMINAL  
    (INCLUDES NUTS, LOCKWASHER, BUSHINGS, WASHERS, CONNECTOR, & STUD)
   
  202-2787 F [1] KIT-HARDWARE  
    (INCLUDES NUT AS, PLUG, SCREW AS, SCREWS, LOCKWASHER, NUT, CONNECTOR, BOLTS, COLLAR, & BOOT)
  F   NOT SHOWN
 

#SEBP32510476
 

331-5717: ALTERNATOR GP-CHARGING

331-5717 ALTERNATOR GP-CHARGING
S/N BCX3569-UP
24-VOLT, 105-AMPERE
FIELD INSTALLATION
i03522400 SEBP3251
3315717 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your C-10 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
2. 1H-3244 [1] LOCKWASHER  
3. 6V-8187 [2] NUT (1/4-28-THD)  
4. 9L-6770 [1] CAP-DUST  
5. 231-6133 [1] KIT-BEARING (ALTERNATOR)  
  5P-3419 [1] RACE-BEARING INNER  
  229-9407 [1] BEARING AS  
6. 308-1362 [1] RECTIFIER AS  
7. 202-2708 [1] DIODE AS (ALTERNATOR)  
8. 3T-6354 [1] REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR)  
9. 202-9897 [1] BEARING-SPECIAL BALL  
10. 100-6531 [1] FAN-ALTERNATOR (11-BLADE)  
11. 187-2034 [1] NUT-FLANGE (5/8-18-THD)  
12. 202-2783 [1] PLATE  
13. 292-3815 [1] KIT-TERMINAL  
14. 202-2700 [1] FRAME (ALTERNATOR)  
15. 308-1365 [1] STATOR AS (ALTERNATOR)  
16. 308-1366 [1] COIL AS (ALTERNATOR)  
17. 9S-2390 [1] RETAINER  
18. 299-1761 [1] ROTOR AS  
19. 4B-2047 [1] NUT (10-24-THD)  
20. 8T-0328 [1] WASHER-HARD (5.5X10X1-MM THK)  
21. 8F-1434 [1] LOCKWASHER  
22. 202-2784 [1] KIT-ALTERNATOR TERMINAL  
    (INCLUDES NUT, LOCKWASHERS, WASHERS, INSULATORS, SCREW, CONNECTORS, & ADAPTER)
23. 202-2785 [1] KIT-ALTERNATOR TERMINAL  
    (INCLUDES STUD, BUSHINGS, WASHERS, CONNECTOR,
    AND NUT)
24. 202-2787 [1] KIT-HARDWARE (ALTERNATOR)  
    (INCLUDES NUT AS, SCREW AS, SCREW, PLUG, LOCKWASHER, NUT, CONNECTOR, BOLT, COLLAR & BOOT)
25. 328-8410 [1] KIT-TERMINAL  
 

#SEBP32510477
 

333-1184: ALTERNATOR GP-CHARGING

333-1184 ALTERNATOR GP-CHARGING
24-VOLT,60-AMPERE
FIELD REPLACEMENT FOR @@@@@ 4N-3986@@@@@
AN ATTACHMENT
i03439265 SEBP3251
3331184 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your C-10 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
2. 1H-3244 [1] LOCKWASHER  
3. 6V-8187 [2] NUT (1/4-28-THD)  
4. 9L-6770 [1] CAP-DUST  
5. 231-6133 [1] KIT-BEARING  
    (INCLUDES BEARING AS & RACE-BEARING INNER)
6. 308-1362 [1] RECTIFIER AS  
7. 202-2708 [1] DIODE AS  
8. 3T-6354 [1] REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR AIR)  
9. 202-9897 [1] BEARING-SPECIAL BALL  
10. 100-6531 [1] FAN-ALTERNATOR (11-BLADE)  
11. 187-2034 [1] NUT-FLANGE (5/8-18-THD)  
12. 202-2783 [1] PLATE  
14. 202-2700 [1] FRAME  
15. 308-1365 [1] STATOR AS  
16. 308-1366 [1] COIL AS  
17. 9S-2390 [1] RETAINER  
18. 299-1761 [1] ROTOR AS  
19. 4B-2047 [1] NUT (10-24-THD)  
20. 8T-0328 [1] WASHER-HARD (5.5X10X1-MM THK)  
21. 8F-1434 [1] LOCKWASHER  
22. 202-2784 [1] KIT-ALTERNATOR TERMINAL (OUTPUT)  
    (INCLUDES NUT, LOCKWASHERS, WASHERS, INSULATORS, SCREW, CONNECTORS, & ADAPTER)
23. 202-2785 [1] KIT-ALTERNATOR TERMINAL (RELAY)  
    (INCLUDES STUD, BUSHINGS, WASHERS, CONNECTOR, & NUT)
24. 202-2787 [1] KIT-HARDWARE (ALTERNATOR AIR)  
    (INCLUDES NUT AS, SCREW AS, SCREW, PLUG, LOCKWASHER, NUT, CONNECTOR, BOLT, COLLAR & BOOT)
25. 328-8410 [1] KIT-TERMINAL  
26. 292-3815 [1] KIT-TERMINAL  
 

#SEBP32510478
 

3E-7577: ALTERNATOR GP-CHARGING

3E-7577 ALTERNATOR GP-CHARGING
24-VOLT, 75-AMPERE
FOR USE WITH @@@@@137-4982@@@@@, @@@@@145-1699@@@@@, @@@@@ 2W-8494@@@@@, @@@@@100-2854@@@@@
AN ATTACHMENT
i00109756 SEBP3251
3E7577 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your C-10 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-2011 [1] SCREW-MACHINE (1/4-20X0.5-IN)  
2. 1H-3244 [1] LOCKWASHER  
3. 187-2034 [1] NUT-FLANGE (5/8-18-THD)  
5. 9S-2260 [1] PLATE-COVER  
6. 9S-2255 [1] COVER  
7. 9S-2262 [1] GASKET  
8. 9S-2544 [6] SCREW-HEX HEAD (8-32X11.13-MM)  
9. 9B-7233 [10] LOCKWASHER  
10. 9S-2437 [5] SCREW-TAPPING (10-24X19.05-MM)  
11. 8F-1434 [5] LOCKWASHER  
12. 5P-3418 [1] BEARING-ROLLER  
13. 5P-3419 [1] RACE-BEARING INNER  
14. 9S-2396 [1] BUSHING-TERMINAL  
15. 9S-2393 [3] DIODE-NEGATIVE  
16. 9N-0943 [1] PLUG-BEARING WELL  
17. 9F-2247 [1] PLUG-PIPE  
18. 9S-2292 J [1] HEAT SINK AS  
19. 100-6656 [1] DIODE AS-ALTERNATOR  
20. 9S-9830 [4] SCREW-FORMING (8-32X19.05-MM)  
21. 8C-9660 [4] WASHER (4.6X7.9X0.8-MM THK)  
22. 9S-2300 [4] INSULATOR  
23. 9S-2301 [1] INSULATION  
24. 9S-2248 [1] COIL & SUPPORT AS  
25. 9N-3388 [3] BOLT (10-24X0.75-IN)  
26. 3T-6354 [1] REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR AIR)  
27. 7N-9023 [1] SCREW AS (8-32X26.9-MM)  
28. 6N-1872 [2] SCREW AS (8-32X1.25-IN)  
29. 4B-2043 [4] NUT (8-32-THD)  
30. 100-6657 [1] PLATE  
31. 9S-2302 [1] ROTOR AS  
32. 9S-2005 [1] GROMMET  
33. 2L-8075 [3] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
34. 100-6658 [1] WIRE AS-ALTERNATOR  
35. 9S-2389 [1] STUD AS  
36. 9L-6770 [1] CAP-DUST  
37. 2P-5616 [1] FRAME-DRIVE END  
38. 9S-2390 [1] RETAINER  
39. 9X-2500 [4] SCREW-HEX FLANGE (10-24X38.1-MM)  
40. 9S-2009 [4] BOLT-FLANGE HEAD (10-24X3.625-IN)  
41. 100-6532 [1] COLLAR-ALTERNATOR  
42. 5P-7807 [1] BALL BEARING  
43. 100-6531 [1] FAN-ALTERNATOR (11-BLADE)  
44. 9S-3451 [1] STATOR AS  
45. 9S-2006 [1] INSULATOR  
46. 9S-2005 [1] GROMMET  
47. 9S-2014 [3] CLIP  
   
    AVAILABLE REPAIR KIT(S):
  9S-2013 [1] KIT-RELAY TERMINAL (ALTERNATOR AIR)  
    (INCLUDES BUSHING, O-RING & HARDWARE)
  9S-2012 [1] KIT-OUTPUT TERMINAL (ALTERNATOR AIR)  
    (INCLUDES GASKETS,TERMINALS, & HARDWARE)
  9S-2290 J [3] KIT-DIODE JUNCTION STUD (HEAT SINK)  
    (EACH INCLUDES INSULATOR & STUD)
  9S-2291 J [3] KIT-POSITIVE DIODE (HEAT SINK)  
    (EACH INCLUDES DIODE)
  J   PART MARKED J INCLUDES KIT(S) MARKED J
 

#SEBP32510479
 

4N-3986: ALTERNATOR GP-CHARGING

4N-3986 ALTERNATOR GP-CHARGING
S/N BCX1-3568
24-VOLT, 60-AMPERE
FIELD REPLACEMENT ORDER @@@@@333-1184@@@@@, @@@@@266-7227@@@@@, 1- 3T-4688 TERMINAL-RING
FOR USE WITH @@@@@137-4982@@@@@, @@@@@ 2W-8494@@@@@, @@@@@100-2854@@@@@
AN ATTACHMENT
i00370433 SEBP3251
4N3986 ALTERNATOR GP-CHARGING Parts scheme 4N3986 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your C-10 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-1876 [1] HOUSING AS (RECTIFIER)  
2. 9S-2396 [1] BUSHING-TERMINAL  
3. 9N-0943 [1] PLUG-BEARING WELL  
4. 5P-3418 [1] BEARING-ROLLER  
5. 6N-1968 [1] STATOR AS  
  2L-8075 [3] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  9N-0939 [1] GROMMET  
6. 9N-0942 [1] PLATE-COVER  
7. 2P-5616 [1] FRAME-DRIVE END  
8. 9S-2390 [1] RETAINER  
9. 9N-0937 [1] RECTIFIER AS  
10. 9S-2302 [1] ROTOR AS  
11. 5P-7807 [1] BALL BEARING  
12. 100-6531 [1] FAN-ALTERNATOR (11-BLADE)  
13. 5P-3419 [1] RACE-BEARING INNER  
14. 7F-7621 [1] WASHER (0.635X1.25X0.09-IN THK)  
15. 2K-4821 [1] LOCKNUT (5/8-18-THD)  
16. 6N-1945 [1] COIL AS-FIELD  
17. 9X-2500 [4] SCREW-HEX FLANGE (10-24X38.1-MM)  
18. 9N-3388 [5] BOLT (10-24X0.75-IN)  
19. 100-6532 [1] COLLAR-ALTERNATOR  
20. 9S-2009 [4] BOLT-FLANGE HEAD (10-24X3.625-IN)  
21. 6N-1944 [1] DIODE AS  
22. 6N-1870 [2] SCREW AS (8-32X34-MM)  
23. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
24. 9S-2544 [7] SCREW-HEX HEAD (8-32X11.13-MM)  
25. 9B-7233 [11] LOCKWASHER  
26. 4B-2043 [4] NUT (8-32-THD)  
27. 6V-8187 [2] NUT (1/4-28-THD)  
28. 1H-3244 [2] LOCKWASHER  
29. 6N-1925 [1] BRACKET  
30. 6N-1946 [1] CAPACITOR AS  
31. 6N-1872 [3] SCREW AS (8-32X1.25-IN)  
32. 3T-6354 [1] REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR)  
33. 6N-1873 [1] LEAD AS  
34. 2L-8075 [3] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
35. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
36. 6N-1871 [1] LEAD AS  
37. 8M-6701 [3] WASHER (0.281X0.5X0.032-IN THK)  
38. 6N-1856 [4] BUSHING-TERMINAL  
   
    AVAILABLE REPAIR KIT(S):
  6N-1875 [1] KIT-OUTPUT TERMINAL (ALTERNATOR)  
    (INCLUDES TERMINAL, LEAD ASSEMBLY, BUSHING, WASHERS, NUTS & LOCKWASHERS)
  105-3762 [1] KIT-ALTERNATOR TERMINAL  
    (INCLUDES TERMINAL ASSEMBLY, INSULATOR, BUSHING, WASHER, NUTS & LOCKWASHERS)
 

Information:

Engine News
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Operation and Maintenance Manual
Alternator - Inspect
C-10 and C-12 Engines
Belt Tensioner - Inspect - If Equipped
C-10 and C-12 Engines
Belt - Inspect
C-10 and C-12 Engines
Special Instruction
Charging System Troubleshooting {1406}
Charging System Troubleshooting {1406}
Procedure to Restore the Residual Magnetic Field on Brushless Alternators{1405}
Procedure to Restore the Residual Magnetic Field on Brushless Alternators{1405}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Technical Information Bulletin
Reman Alternator Failures {1405}
Reman Alternator Failures {1405}
26SI Reman Charging Alternator Group Has Been Discontinued {1405}
26SI Reman Charging Alternator Group Has Been Discontinued {1405}
Specifications
Alternator
Alternator - Delco 21SI
Alternator and Regulator
C-10 and C-12 Industrial Engines
Alternator
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator
N3 Series Brushless Alternators
Alternator
Alternator - Delco 27SI
Alternator
SCJ and 8SC Series Alternators
Systems Operation
General Information
Alternator - Delco 21SI
Component Description
Alternator - Delco 21SI
Normal Operation
Alternator - Delco 21SI
General Information
HDB Series and M1 Series Heavy Duty Brushless Alternators
Normal Operation
HDB Series and M1 Series Heavy Duty Brushless Alternators
Component Description
HDB Series and M1 Series Heavy Duty Brushless Alternators
General Information
N3 Series Brushless Alternators
Component Description
N3 Series Brushless Alternators
Normal Operation
N3 Series Brushless Alternators
General Information
Alternator - Delco 27SI
Normal Operation
Alternator - Delco 27SI
Component Description
Alternator - Delco 27SI
General Information
SCJ and 8SC Series Alternators
Normal Operation
SCJ and 8SC Series Alternators
Component Description
SCJ and 8SC Series Alternators
Information Release Memo
CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS
Testing and Adjusting
Belt Tension Chart
C-10 and C-12 Industrial Engines
Charging System - Test
C-10 and C-12 Industrial Engines
Capacitor - Test
Alternator - Delco 21SI
Diode Assembly - Test
Alternator - Delco 21SI
Brush Length - Check
Alternator - Delco 27SI
Field Winding - Test
Alternator - Delco 21SI
Insulated Screw - Check
Alternator - Delco 21SI
Rectifier - Test
Alternator - Delco 21SI
Regulator - Test
Alternator - Delco 21SI
Stator - Test
Alternator - Delco 21SI
Residual Magnetism - Restore
Alternator - Delco 21SI
Field Winding - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators
Capacitor - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators
Stator - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators
Rectifier - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators
Residual Magnetism - Restore
N3 Series Brushless Alternators
Regulator - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators
Field Winding - Test
N3 Series Brushless Alternators
Capacitor - Test
N3 Series Brushless Alternators
Rectifier - Test
N3 Series Brushless Alternators
Stator - Test
N3 Series Brushless Alternators
Regulator - Test
N3 Series Brushless Alternators
Regulator - Test
Alternator - Delco 27SI
Field Winding - Test
Alternator - Delco 27SI
Stator - Test
Alternator - Delco 27SI
Diode Assembly - Test
Alternator - Delco 27SI
Rectifier - Test
Alternator - Delco 27SI
Insulated Screw - Check
Alternator - Delco 27SI
Residual Magnetism - Restore
Alternator - Delco 27SI
Capacitor - Test
Alternator - Delco 27SI
Capacitor - Test
SCJ and 8SC Series Alternators
Field Winding - Test
SCJ and 8SC Series Alternators
Stator - Test
SCJ and 8SC Series Alternators
Diode Assembly - Test
SCJ and 8SC Series Alternators
Regulator - Test
SCJ and 8SC Series Alternators
Residual Magnetism - Restore
SCJ and 8SC Series Alternators
Brush Assembly - Test
SCJ and 8SC Series Alternators
Brush Length - Check
SCJ and 8SC Series Alternators
Troubleshooting
General Information
N3 Series Brushless Alternators
Charging System
Alternator - Delco 27SI
Charging System
HDB Series and M1 Series Heavy Duty Brushless Alternators
General Information
Alternator - Delco 27SI
Alternator
Alternator - Delco 27SI
General Information
SCJ and 8SC Series Alternators
Charging System
SCJ and 8SC Series Alternators
Alternator - Charging Problem
C-10, C-12, C-15 and C-16 Industrial Engines
Disassembly and Assembly
Alternator - Remove and Install
C-10 and C-12 Industrial Engines
Alternator - Disassemble
Alternator - Delco 21SI
Alternator - Assemble
Alternator - Delco 21SI
Alternator - Disassemble - M1 Series Alternator (35 Amp)
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator - Assemble - M1 Series Alternator (35 Amp)
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator - Assemble - HDB Series Alternator
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator - Disassemble - HDB Series Alternator
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator - Assemble
N3 Series Brushless Alternators
Alternator - Disassemble
N3 Series Brushless Alternators
Alternator - Disassemble
Alternator - Delco 27SI
Alternator - Assemble
Alternator - Delco 27SI
Alternator - Disassemble
SCJ and 8SC Series Alternators
Alternator - Assemble
SCJ and 8SC Series Alternators
Service Magazine
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}

Caterpillar Parts SIS Catalog C-10 :

ALTERNATOR GP-CHARGING
169-3345 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
132-2156 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
125-9597 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
121-4134 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
112-5041 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
107-7977 ALTERNATOR GP-CHARGING
100-5047 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
100-5046 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
236-1904 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
266-7227 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
268-4110 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
306-2174 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
316-7251 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
331-5717 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
333-1184 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
3E-7577 ALTERNATOR GP-CHARGING

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.