AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

197-8392 SENSOR GP-TEMPERATURE COOLANT, WATER PART OF 189-6593, 243-6619 WIRING GP-ELECTRONIC CONTROL Type 2 C-10


ELECTRICAL AND STARTING SYSTEM
SENSOR GP
STARTING MOTOR GP
STARTING AID GP
STARTING MOTOR GP

INDUSTRIAL ENGINE C-10 INDUSTRIAL ENGINE BCX
 C-10 Industrial Engine BCX00001-UP SEBP3251 C-10 BCX   (2000)

ELECTRICAL AND STARTING SYSTEM

SENSOR GP
SENSOR GP-TEMPERATURE
197-8391 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
197-8392 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
197-8392 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
244-1416 SENSOR GP-TEMPERATURE
 

#SEBP32510580
 

197-8392: SENSOR GP-TEMPERATURE

197-8392 SENSOR GP-TEMPERATURE
COOLANT, WATER
PART OF 189-6593, 243-6619 WIRING GP-ELECTRONIC CONTROL
Type 2
i02683553 SEBP3251
1978392 SENSOR GP-TEMPERATURE Parts scheme
  For full view, you need register

Parts for your C-10 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 264-4297 C [1] SENSOR AS-TEMPERATURE (2-PIN)  
  137-6645 [1] PAD-CONNECTOR  
2. 6V-6609 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP32510581
 

244-1416: SENSOR GP-TEMPERATURE

244-1416 SENSOR GP-TEMPERATURE -AUXILIARY
AN ATTACHMENT
i02011453 SEBP3251
2441416 SENSOR GP-TEMPERATURE Parts scheme
  For full view, you need register

Parts for your C-10 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 131-0427 Y [1] SENSOR GP-TEMPERATURE  
2. 243-4615 Y [1] HARNESS AS-SENSOR (AUXILIARY TEMPERATURE)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP32510582
 

138-2544: SILENCER-AIR STARTING

138-2544 SILENCER-AIR STARTING
REQUIRES AIR STARTING MOTOR WITH 1 1/4 - 11 1/2 NPT THREAD EXHAUST PORT
AN ATTACHMENT
i00604069 SEBP3251
1382544 SILENCER-AIR STARTING Parts scheme
  For full view, you need register

Parts for your C-10 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (INDIVIDUAL PARTS ARE NOT SERVICED SEPARATELY)
 

#SEBP32510583
 

143-8872: STARTING AID GP-ETHER

143-8872 STARTING AID GP-ETHER
24 VOLT
AN ATTACHMENT
i00639452 SEBP3251
  For full view, you need register

Parts for your C-10 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  127-7443 [1] ATOMIZER AS  
    (ON 3412 INSTALL W/ORIFICE DIRECTED TOWARD FRONT OR REAR OF ENGINE)
    (ON 3408 INSTALL WITH ORIFICE DIRECTED DOWNWARD TOWARD ENGINE)
    (ON 3406 INSTALL WITH ORIFICE DIRECTED TOWARD ENGINE)
  3B-6768 [1] BUSHING-REDUCER  
  7N-2059 [1] CLAMP AS (CYLINDER)  
  5P-2948 [1] FITTING AS (VALVE ASSEMBLY)  
  102-8807 [1] KIT-CONNECTING PLUG (2-PIN)(ETHER STARTING AID)  
    (INCLUDES PLUG AS & WEDGE)
  3E-5239 [1] RELAY AS (24-VOLT)(ETHER STARTING AID)  
    (THIS RELAY MUST BE ISOLATED FROM ENGINE VIBRATION)
  102-8812 [1] SEAL  
  8T-8730 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  2V-1713 [1] TAG-NOTICE (STARTING AID)(ETHER)  
  7E-8866 [4] TERMINAL-BLADE (14-GA TO 16-GA)  
  7N-0140 [1] TUBE AS-COIL  
  8N-3536 [1] TUBE-STEEL  
  3E-6333 [1] VALVE AS-SOLENOID (24-VOLT)  
  7N-9801 [1] GASKET  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)(ETHER START VALVE)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  5P-5623 BD WIRE-ELECTRICAL (16-GA, BLACK)  
   
  7N-0296 A [1] CYLINDER AS-ETHER (STARTING AID)  
    (MUST BE PROCURED LOCALLY FROM YOUR CATERPILLAR DEALER)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  D   ORDER BY THE METER
 

#SEBP32510584
 

193-8091: STARTING AID GP-ETHER

193-8091 STARTING AID GP-ETHER
24 VOLT
AN ATTACHMENT
i01434316 SEBP3251
  For full view, you need register

Parts for your C-10 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6N-9995 [1] ATOMIZER-ETHER  
    (TO INLET MANIFOLD)
    (INSTALL WITH CROSS DRILLED HOLE IN TIP ALIGNED PARALLEL TO ENGINE CRANKSHAFT)
  7N-2059 [1] CLAMP AS (CYLINDER)  
    (TO CYLINDER)
  5P-2948 [1] FITTING AS (VALVE ASSEMBLY)  
  4K-9821 [1] SLEEVE  
  4K-9822 [1] NUT (5/16-24-THD)  
  7N-9801 A [1] GASKET (ETHER STARTING AID CYLINDER)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (VALVE ASSEMBLY)
    (INCLUDES PLUG ASSEMBLY & WEDGE)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (VALVE ASSEMBLY)
    (INCLUDES RECEPTACLE ASSEMBLY & PLUG)
  3E-5239 [1] RELAY AS (24-VOLT)(ETHER STARTING AID)  
  8T-8730 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    (TO VALVE ASSEMBLY)
  2V-1713 [1] TAG-NOTICE (STARTING AID)(ETHER)  
  7E-8866 [4] TERMINAL-BLADE (14-GA TO 16-GA)  
    (TO RELAY ASSEMBLY)
  7N-0140 [1] TUBE AS-COIL  
    (TUBE TO CONNECTOR)
  8N-3536 [1] TUBE-STEEL  
  3E-6332 [1] VALVE GP-ETHER STARTING (24-VOLT)  
  155-2261 [1] WEDGE-PLUG LOCK (2-PIN)  
  5P-5623 BD WIRE-ELECTRICAL (16-GA, BLACK)  
   
    AVAILABLE REPLACEMENT PART(S):
  7N-0296 A CYLINDER AS-ETHER (STARTING AID)  
    (CAN BE PROCURED THROUGH YOUR LOCAL CATERPILLAR DEALER)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  D   ORDER BY THE METER
 

#SEBP32510585
 

221-5429: STARTING AID GP-ETHER

221-5429 STARTING AID GP-ETHER
CONTINUOUS FLOW SYSTEM
FOR USE WITH 24 VOLT SYSTEM
CANNOT BE USED WITH MECHANICAL ENGINE
AN ATTACHMENT
i01872154 SEBP3251
  For full view, you need register

Parts for your C-10 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6N-9995 [1] ATOMIZER-ETHER  
    (TO INLET MANIFOLD)
    (INSTALL WITH CROSS DRILLED HOLE IN TIP ALIGNED PARALLEL TO ENGINE CRANKSHAFT)
  7N-2059 [1] CLAMP AS (CYLINDER)  
    (TO CYLINDER)
  5P-2948 [1] FITTING AS (VALVE ASSEMBLY)  
  230-0917 [1] FITTING AS (ETHER STARTING AID CYLINDER)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (VALVE ASSEMBLY)
    (INCLUDES PLUG ASSEMBLY & WEDGE)
  3E-5239 [1] RELAY AS (24-VOLT)(ETHER STARTING AID)  
  186-3736 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    (TO VALVE ASSEMBLY)
  2V-1713 [1] TAG-NOTICE (STARTING AID)(ETHER)  
  7E-8866 [4] TERMINAL-BLADE (14-GA TO 16-GA)  
    (TO RELAY ASSEMBLY)
  7N-0140 [1] TUBE AS-COIL  
    (TUBE TO CONNECTOR)
  8N-3536 [1] TUBE-STEEL  
  228-0853 [1] VALVE GP-ETHER STARTING (24-VOLT)(STARTING AID)  
  155-2261 [1] WEDGE-PLUG LOCK (2-PIN)  
  5P-5623 BD WIRE-ELECTRICAL (16-GA, BLACK)  
   
    AVAILABLE REPLACEMENT PART(S):
  7N-0296 A CYLINDER AS-ETHER (STARTING AID)  
    (CAN BE PROCURED THROUGH YOUR LOCAL CATERPILLAR DEALER)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  D   ORDER BY THE METER
 

#SEBP32510586
 

105-5081: STARTING MOTOR GP-AIR

105-5081 STARTING MOTOR GP-AIR
PART OF 133-5882 STARTING MOTOR GP-AIR
Type 1
AN ATTACHMENT
i00481268 SEBP3251
1055081 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your C-10 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-4375 [1] BALL BEARING  
2. 4N-4377 [1] PLATE-REAR END  
3. 4N-4383 [1] HOUSING-MOTOR  
4. 4N-4379 [1] DOWEL-CYLINDER  
5. 4N-4390 [1] WASHER-THRUST (0.797X1.50X0.125-IN THK)  
6. 4N-4391 [1] KEY-GEAR  
7. 4N-4387 [1] CASE AS-GEAR  
  4N-4388 [1] WASHER-SPECIAL  
  009-1436 [1] BEARING  
8. 4N-4394 [1] GEAR-DRIVE (45-TEETH)  
9. 5F-8651 [1] BALL BEARING  
10. 4N-4392 [1] COVER AS-CASE  
10A. 4N-4393 [1] SEAL-LIP TYPE  
10B. 6J-2244 [1] SEAL-O-RING  
10C. 6V-1179 [1] SEAL-O-RING  
11. 4N-4397 [1] COLLAR-DRIVE SHAFT  
12. 105-5136 [4] WASHER (9.92X16.67X0.79-MM THK)  
13. 3P-0653 [1] SEAL-O-RING  
14. 4N-4403 [1] SPRING-RING  
15. 105-5138 [1] HOUSING  
16. 4N-4405 [1] CLUTCH AS-DRIVE  
17. 4N-4421 [1] SHAFT-DRIVE  
18. 105-5137 [1] PISTON  
19. 4N-4400 [1] RING-SHIFT  
20. 4N-4402 [1] SPACER (2.156X2.375X0.188-IN THK)  
21. 052-0512 [1] RING-RETAINING (INTERNAL)  
22. 4N-4386 [1] RETAINER-PINION  
23. 4N-4413 [1] PINION-ROTOR  
24. 9B-9774 [1] BALL BEARING  
25. 4N-4384 [1] GASKET-GEAR CASE  
26. 4N-4382 [1] PLATE-FRONT END  
27. 4N-4378 [1] CYLINDER  
28. 4N-4381 [1] ROTOR  
29. 4N-4376 [1] GASKET-HOUSING COVER  
30. 5L-4035 [1] RING-RETAINING (EXTERNAL)  
31. 8F-8544 [4] BOLT (3/8-16X6.25-IN)  
32. 7B-2742 [12] BOLT (1/4-20X1.25-IN)  
33. 5P-0537 [12] WASHER-HARD (7.2X14.5X2-MM THK)  
34. 4N-4409 [1] DEFLECTOR AS (ROAD SPLASH)  
35. 8T-6763 [2] PLUG-PIPE (1/4-18-THD)  
36. 6D-3787 [1] BEARING-ROLLER  
37. 4N-4380 [1] KIT-VANE (AIR STARTING MOTOR)  
38. 4N-4371 [1] COVER AS-HOUSING  
  7M-7410 [1] PLUG-PIPE  
 

#SEBP32510587
 

105-5081: STARTING MOTOR GP-AIR

105-5081 STARTING MOTOR GP-AIR
PART OF 133-5882 STARTING MOTOR GP-AIR
Type 2
AN ATTACHMENT
i03177168 SEBP3251
1055081 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your C-10 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-4375 [1] BALL BEARING  
2. 4N-4377 [1] PLATE-REAR END  
3. 4N-4383 [1] HOUSING-MOTOR  
4. 4N-4379 [1] DOWEL-CYLINDER  
5. 4N-4390 [1] WASHER-THRUST (0.797X1.50X0.125-IN THK)  
6. 4N-4391 [1] KEY-GEAR  
7. 4N-4387 [1] CASE AS-GEAR  
7A. 4N-4388 [1] WASHER-SPECIAL  
7B. 009-1436 [1] BEARING  
8. 4N-4394 [1] GEAR-DRIVE (45-TEETH)  
9. 5F-8651 [1] BALL BEARING  
10. 4N-4392 [1] COVER AS-CASE  
10A. 4N-4393 [1] SEAL-LIP TYPE  
10B. 6J-2244 [1] SEAL-O-RING  
10C. 6V-1179 [1] SEAL-O-RING  
11. 4N-4397 [1] COLLAR-DRIVE SHAFT  
12. 105-5136 [4] WASHER (9.92X16.67X0.79-MM THK)  
13. 3P-0653 [1] SEAL-O-RING  
14. 4N-4403 [1] SPRING-RING  
15. 105-5138 [1] HOUSING  
16. 4N-4405 [1] CLUTCH AS-DRIVE  
17. 4N-4421 [1] SHAFT-DRIVE  
18. 105-5137 [1] PISTON  
19. 4N-4400 [2] RING-SHIFT  
20. 4N-4402 [1] SPACER (2.156X2.375X0.188-IN THK)  
21. 052-0512 [1] RING-RETAINING (INTERNAL)  
22. 4N-4386 [1] RETAINER-PINION  
23. 4N-4413 [1] PINION-ROTOR  
24. 9B-9774 [1] BALL BEARING  
25. 4N-4384 [1] GASKET-GEAR CASE  
26. 4N-4382 [1] PLATE-FRONT END  
27. 4N-4378 [1] CYLINDER  
28. 4N-4381 [1] ROTOR  
29. 4N-4376 [1] GASKET-HOUSING COVER  
30. 5L-4035 [1] RING-RETAINING (EXTERNAL)  
31. 8F-8544 [4] BOLT (3/8-16X6.25-IN)  
32. 7B-2742 C [9] BOLT (1/4-20X1.25-IN)  
33. 5P-0537 C [9] WASHER-HARD (7.2X14.5X2-MM THK)  
34. 4N-4409 [1] DEFLECTOR AS (ROAD SPLASH)  
35. 8T-6763 [2] PLUG-PIPE (1/4-18-THD)  
36. 6D-3787 [1] BEARING-ROLLER  
37. 4N-4380 [1] KIT-VANE (AIR STARTING MOTOR)  
38. 4N-4371 [1] COVER AS-HOUSING  
  7M-7410 [1] PLUG-PIPE  
39. 472-7200 [2] GASKET  
40. 472-7201 [2] GASKET-HOUSING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP32510588
 

133-5882: STARTING MOTOR GP-AIR

133-5882 STARTING MOTOR GP-AIR
LH MOUNTED, REQUIRES AIR SUPPLY SYSTEM CAPABLE OF 620-KPA TO 1034-KPA MAX AIR PRESSURE, 1L-5011 REQUIRED WHEN USED WITH SUPPLY SYSTEMS PRODUCING MORE THAN 1034-KPA AIR PRESSURE
AN ATTACHMENT
i01330443 SEBP3251
1335882 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your C-10 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-5081 Y [1] STARTING MOTOR GP-AIR  
2. 3B-7257 [1] BUSHING-REDUCER  
3. 3B-6555 [2] ELBOW  
4. 9L-4652 I [1] HOSE AS  
5. 4B-7770 [1] TEE  
6. 4D-3967 [1] BUSHING-REDUCER  
7. 6V-1813 [1] FITTING  
8. 4N-3410 [1] VALVE AS-CONTROL (STARTING)(AIR)  
  2W-0629 [1] KNOB-ENGINE START (AIR STARTING MOTOR)  
9. 6B-8129 [2] NIPPLE-PIPE  
11. 6D-3479 [1] CLIP (LOOP)  
12. 118-9142 [1] BRACKET  
13. 4H-7869 [1] GASKET  
14. 176-2543 [2] BOLT-12 POINT HEAD (5/8-11X1.75-IN)  
15. 3E-8034 [1] BOLT (5/8-11X1.5-IN)  
16. 7X-0591 [1] WASHER-HARD (17X29X3-MM THK)  
17. 9S-5828 [1] U-BOLT (1/4-20-THD)  
18. 9S-8750 [2] NUT-FULL (1/4-20-THD)  
19. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
20. 6N-3899 [1] SPACER  
21. 7M-9544 [1] VALVE (AIR STARTING MOTOR)  
22. 6B-8128 [1] NIPPLE-PIPE  
23. 1L-2279 [1] ELBOW  
24. 172-0208 Y [1] LUBRICATOR GP-AIR MOTOR  
25. 6K-1972 [1] ELBOW-FLARED  
26. 3B-6498 [1] ELBOW  
27. 5P-4479 [1] ELBOW (FLARED-LONG)  
28. 5J-7303 [2] ELBOW  
29. 4W-4536 I [1] HOSE AS  
30. 7V-1037 I [1] HOSE AS  
31. 330-9750 [1] TEE AS  
  3E-7410 [1] TEE  
  214-7568 [1] SEAL-O-RING  
32. 360-3667 [1] ADAPTER AS  
  2P-1314 [1] CONNECTOR  
  214-7568 [1] SEAL-O-RING  
33. 172-4288 I [1] HOSE AS  
34. 357-4616 [1] ADAPTER AS  
  7X-0902 [1] CONNECTOR  
  214-7568 [1] SEAL-O-RING  
35. 7K-9197 [1] ELBOW  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP32510589
 

101-8936: STARTING MOTOR GP-ELECTRIC

101-8936 STARTING MOTOR GP-ELECTRIC
12 VOLT
AN ATTACHMENT
i00464485 SEBP3251
1018936 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your C-10 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-2332 [3] BOLT-12 POINT HEAD (5/8-11X1.75-IN)  
2. 207-1524 Y [1] STARTING MOTOR GP-ELECTRIC (12-VOLT)  
3. 155-8725 [1] GASKET  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Correction to Information Regarding the Need for Timing Calibration after Replacing the Engine ECM {1901, 1912, 1912}
2002/03/01
Coolant Sensor Installation Service Notes {5574}
2005/12/26
Special Instruction
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Specifications
Magnetic Pickup
C-10 and C-12 Industrial Engines
Engine Oil Pressure Sensor
C-10 and C-12 Industrial Engines
Engine Oil Pressure
C-10 and C-12 Industrial Engines
Atmospheric Pressure Sensor
C-10 and C-12 Industrial Engines
Fuel Temperature Sensor
C-10 and C-12 Industrial Engines
Coolant Temperature Sensor
C-10 and C-12 Industrial Engines
Inlet Air Temperature Sensor
C-10 and C-12 Industrial Engines
Fuel Pressure Sensor
C-10 and C-12 Industrial Engines
Speed/Timing Sensor
C-10 and C-12 Industrial Engines
Turbocharger Outlet Pressure Sensor
C-10 and C-12 Industrial Engines
Throttle Position Sensor
C-10 and C-12 Industrial Engines
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Troubleshooting
CID 0261 FMI 13 Engine Timing Calibration required
C-10, C-12, C-15 and C-16 Industrial Engines
CID 0263 FMI 03 Digital Sensor Supply short to +batt
C-10, C-12, C-15 and C-16 Industrial Engines
CID 0263 FMI 04 Digital Sensor Supply short to ground
C-10, C-12, C-15 and C-16 Industrial Engines
CID 0320 FMI 02 Speed/Timing Sensor Loss of Signal
C-10, C-12, C-15 and C-16 Industrial Engines
CID 0320 FMI 11 Speed/Timing Sensor mechanical failure
C-10, C-12, C-15 and C-16 Industrial Engines
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C-10, C-12, C-15 and C-16 Industrial Engines
CID 0100 FMI 04 Engine Oil Pressure short to ground
C-10, C-12, C-15 and C-16 Industrial Engines
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C-10, C-12, C-15 and C-16 Industrial Engines
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C-10, C-12, C-15 and C-16 Industrial Engines
CID 0174 FMI 03 Fuel Temperature open/short to +batt
C-10, C-12, C-15 and C-16 Industrial Engines
CID 0174 FMI 04 Fuel Temperature short to ground
C-10, C-12, C-15 and C-16 Industrial Engines
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C-10, C-12, C-15 and C-16 Industrial Engines
CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
C-10, C-12, C-15 and C-16 Industrial Engines
CID 0273 FMI 04 Turbo Outlet Pressure short to ground
C-10, C-12, C-15 and C-16 Industrial Engines
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C-10, C-12, C-15 and C-16 Industrial Engines
CID 0274 FMI 04 Atmospheric Pressure short to ground
C-10, C-12, C-15 and C-16 Industrial Engines
CID 0041 FMI 04 8 Volt DC Supply short to ground
C-10, C-12, C-15 and C-16 Industrial Engines
CID 0091 FMI 08 Throttle Position signal abnormal
C-10, C-12, C-15 and C-16 Industrial Engines
CID 0094 FMI 03 Fuel Pressure open/short to +batt
C-10, C-12, C-15 and C-16 Industrial Engines
CID 0094 FMI 04 Fuel Pressure short to ground
C-10, C-12, C-15 and C-16 Industrial Engines
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C-10, C-12, C-15 and C-16 Industrial Engines
CID 0110 FMI 04 Engine Coolant Temperature short to ground
C-10, C-12, C-15 and C-16 Industrial Engines
Digital Sensor Supply Circuit - Test
C-10, C-12, C-15 and C-16 Industrial Engines
Engine Temperature Sensor Open or Short Circuit - Test
C-10, C-12, C-15 and C-16 Industrial Engines
Sensors and Electrical Connectors
C-10, C-12, C-15 and C-16 Industrial Engines
CID 0041 FMI 03 8 Volt DC Supply short to +batt
C-10, C-12, C-15 and C-16 Industrial Engines
5 Volt Engine Pressure Sensor Supply Circuit - Test
C-10, C-12, C-15 and C-16 Industrial Engines
CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
C-10, C-12, C-15 and C-16 Industrial Engines
Auxiliary Temperature Sensor Circuit - Test
C-10, C-12, C-15 and C-16 Industrial Engines
Coolant Level Sensor Circuit - Test
C-10, C-12, C-15 and C-16 Industrial Engines
CID 0091 FMI 13 Throttle Position calibration required
C-10, C-12, C-15 and C-16 Industrial Engines
CID 0342 FMI 02 Loss of Secondary Engine Speed signal
C-10, C-12, C-15 and C-16 Industrial Engines
CID 0273 FMI 00 Turbo Outlet Pressure above normal
C-10, C-12, C-15 and C-16 Industrial Engines
CID 1835 FMI 03 Auxiliary Pressure Sensor open/short to +batt
C-10, C-12, C-15 and C-16 Industrial Engines
CID 1835 FMI 04 Auxiliary Pressure Sensor short to ground
C-10, C-12, C-15 and C-16 Industrial Engines
Throttle Position Sensor Circuit - Test
C-10, C-12, C-15 and C-16 Industrial Engines
CID 0022 FMI 13 Timing Sensor calibration required
C-10, C-12, C-15 and C-16 Industrial Engines
Engine Pressure Sensor Open or Short Circuit - Test
C-10, C-12, C-15 and C-16 Industrial Engines
Engine Speed/Timing Sensor Circuit - Test
C-10, C-12, C-15 and C-16 Industrial Engines
CID 1836 FMI 08 Auxiliary Temperature Sensor signal abnormal
C-10, C-12, C-15 and C-16 Industrial Engines
Throttle Position Sensor - Calibrate
C-10, C-12, C-15 and C-16 Industrial Engines
Engine Speed/Timing Sensor - Calibrate
C-10, C-12, C-15 and C-16 Industrial Engines
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C-10, C-12, C-15 and C-16 Industrial Engines
Disassembly and Assembly
Engine Oil Pressure Sensor - Remove and Install
C-10 and C-12 Industrial Engines
Coolant Temperature Sensor - Remove and Install
C-10 and C-12 Industrial Engines
Camshaft Position Sensor - Remove and Install
C-10 and C-12 Industrial Engines
Crankshaft Position Sensor - Remove and Install
C-10 and C-12 Industrial Engines

Caterpillar Parts SIS Catalog C-10 :

SENSOR GP-TEMPERATURE
197-8392 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
197-8391 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
197-8391 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
131-0427 SENSOR GP-TEMPERATURE
SENSOR GP-SPEED
7W-3355 SENSOR GP-SPEED
SENSOR GP-SPEED
7W-3354 SENSOR GP-SPEED
SENSOR GP-SPEED
5N-8757 SENSOR GP-SPEED
SENSOR GP-SPEED
4P-5820 SENSOR GP-SPEED
SENSOR GP-TEMPERATURE
244-1416 SENSOR GP-TEMPERATURE
SILENCER-AIR STARTING
138-2544 SILENCER-AIR STARTING
143-8872 STARTING AID GP-ETHER
193-8091 STARTING AID GP-ETHER
221-5429 STARTING AID GP-ETHER
STARTING MOTOR GP-AIR
105-5081 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
105-5081 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
133-5882 STARTING MOTOR GP-AIR

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.