AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

161-4276 CAMSHAFT GP S/N BEJ1-762 3126B INDUSTRIAL ENGINE


BASIC ENGINE
CAMSHAFT GP
CARRIER GP-SEAL
CLUTCH GP
COMPRESSOR GP-REFRIGERANT

INDUSTRIAL ENGINE 3126B INDUSTRIAL ENGINE BEJ
 3126B Industrial Engine BEJ00001-UP SEBP3253 3126B BEJ   (2000)

BASIC ENGINE

CAMSHAFT GP
CAMSHAFT GP
161-4276 CAMSHAFT GP
CAMSHAFT GP
216-7922 CAMSHAFT GP
 

#SEBP32530060
 

161-4276: CAMSHAFT GP

161-4276 CAMSHAFT GP
S/N BEJ1-762
i01135251 SEBP3253
1614276 CAMSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3126B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 205-1259 [1] CAMSHAFT AS  
1A. 1B-8705 [1] KEY-WOODRUFF  
1B. 107-7809 [1] GEAR-CAMSHAFT (100-TEETH)  
2. 107-7694 [1] PLATE-THRUST  
3. 6V-3940 M [2] BOLT (M8X1.25X25-MM)  
  M   METRIC PART
 

#SEBP32530061
 

216-7922: CAMSHAFT GP

216-7922 CAMSHAFT GP
S/N BEJ722-UP
i01688694 SEBP3253
2167922 CAMSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3126B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-7694 [1] PLATE-THRUST  
2. 216-7921 [1] CAMSHAFT AS  
2A. 1B-8705 [1] KEY-WOODRUFF  
2B. 205-1322 [1] GEAR-CAMSHAFT (100-TEETH)  
3. 6V-3940 M [2] BOLT (M8X1.25X25-MM)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP32530062
 

132-3844: CARRIER GP-SEAL

132-3844 CARRIER GP-SEAL
FOR USE WITH @@@@@132-2104@@@@@
CANNOT BE USED WITH @@@@@132-2107@@@@@
AN ATTACHMENT
i00495750 SEBP3253
1323844 CARRIER GP-SEAL Parts scheme
  For full view, you need register

Parts for your 3126B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-6546 [1] COVER  
2. 247-1876 [1] SEAL  
3. 239-0583 [1] GASKET  
4. 6V-3538 [2] DOWEL  
5. 6V-3940 M [8] BOLT (M8X1.25X25-MM)  
6. 9M-1974 [8] WASHER-HARD (8.8X16X2-MM THK)  
7. 4C-9612 B SEALANT-SILICONE  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP32530063
 

4W-3462: CARRIER GP-SEAL

4W-3462 CARRIER GP-SEAL
S/N BEJ10443-UP
ALSO AN ATTACHMENT
i00122128 SEBP3253
4W3462 CARRIER GP-SEAL Parts scheme
  For full view, you need register

Parts for your 3126B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-6546 [1] COVER  
2. 247-1876 [1] SEAL  
3. 239-0583 [1] GASKET  
4. 6V-3538 [2] DOWEL  
5. 6V-3940 M [8] BOLT (M8X1.25X25-MM)  
6. 9M-1974 [8] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
 

#SEBP32530064
 

5N-3789: CLUTCH AS

5N-3789 CLUTCH AS
PART OF 4W-2650 CLUTCH GP
AN ATTACHMENT
i00384816 SEBP3253
5N3789 CLUTCH AS Parts scheme
  For full view, you need register

Parts for your 3126B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2L-8256 [1] PLATE-HUB & BACK  
2. 3N-7952 [1] PLATE-DRIVE  
3. 3N-7953 [1] PLATE AS  
4. 3N-7955 [1] SPRING  
5. 3N-7954 [1] LOCK PIN  
6. 2L-8259 [3] LEVER  
7. 5B-5251 [6] LINK  
8. 4B-4715 [1] COLLAR AS  
  0L-0639 [2] BOLT (3/8-24X2.25-IN)  
  2L-6267 [2] LOCKNUT (3/8-24-THD)  
  4B-4722 B [2] SHIM  
9. 2L-8260 [1] SLEEVE-SLIDING  
10. 2L-8262 [1] RING-ADJUSTMENT  
11. 6L-3966 [3] PIN  
12. 6L-3964 [3] PIN-COTTER  
13. 5D-2751 [6] WASHER-SPRING (0.406X0.687X0.125-IN THK)  
14. 6L-3960 [6] PIN-COTTER  
15. 6L-3965 [6] PIN  
  B   USE AS REQUIRED
 

#SEBP32530065
 

3N-9097: CLUTCH GP

3N-9097 CLUTCH GP
PART OF 3N-9098 POWER TAKE-OFF GP
AN ATTACHMENT
i00366955 SEBP3253
3N9097 CLUTCH GP Parts scheme
  For full view, you need register

Parts for your 3126B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4B-4810 [1] LEVER AS-HAND  
  0S-1587 [1] BOLT (1/2-13X1.75-IN)  
2. 6L-3972 [4] PIN  
  6L-3961 [4] PIN-COTTER  
  1L-4863 [8] WASHER-SPRING  
3. 1L-6931 [2] SCREW AS-MACHINE (1/4-20X0.5-IN)  
4. 6L-3967 [8] PIN  
  6L-3964 [8] PIN-COTTER  
5. 4B-4721 [8] LINK  
6. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)(CLUTCH)  
  9S-1354 [1] NUT (5/8-18-THD)  
  6F-0253 [1] LOCKWASHER  
7. 3H-9572 [1] RING-ADJUSTMENT  
8. 5B-2410 [1] HOSE AS  
9. 4B-4716 [1] COLLAR AS-SLEEVE  
10. 0L-0639 [2] BOLT (3/8-24X2.25-IN)  
  2L-6267 [2] LOCKNUT (3/8-24-THD)  
  4B-4758 B [2] SHIM (0.06-IN THK)  
11. 2L-6010 [1] PLUG-PIPE  
12. 4B-4782 [1] RETAINER  
13. 3F-3729 [1] RING-SNAP  
14. 4L-3527 [1] PLATE-CLUTCH DRIVING  
15. 4H-0002 [4] LEVER  
16. 3N-4086 [1] SHAFT-CLUTCH  
17. 8B-1303 [1] HOUSING-CLUTCH  
  108-3560 [1] PLATE-WARNING (POWER TAKE-OFF)  
18. 1B-3922 [2] CUP-BEARING  
  6B-3183 [2] CONE-BEARING  
19. 7L-0116 [1] LOCK  
20. 2H-3755 [1] BOLT (5/16-18X0.43-IN)  
  3F-9556 [1] LOCKWASHER  
21. 4B-4792 [1] YOKE AS  
22. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
  3B-4506 [2] LOCKWASHER  
23. 8B-7121 [2] FITTING-HYDRAULIC (CLUTCH)  
24. 6L-5151 [2] KEY-WOODRUFF  
25. 4B-4754 [1] SHAFT  
26. 1L-5517 [1] SLEEVE-THROW-OUT  
27. 3N-8125 [1] PLATE AS-PRESSURE  
28. 3N-8123 [1] LOCK PIN  
29. 3N-8124 [1] SPRING  
30. 5N-9316 [1] RING-DRIVE  
31. 4B-4752 [1] NUT  
32. 4B-4772 [1] LOCK  
33. 5B-2417 [1] KEY  
34. 1L-5516 [1] PLATE-CLUTCH  
35. 108-3633 [1] PLATE-INSTRUCTION (POWER TAKE-OFF)  
  B   USE AS REQUIRED
 

#SEBP32530066
 

4P-2270: CLUTCH GP

4P-2270 CLUTCH GP
PART OF 6I-0415 POWER TAKE-OFF GP
AN ATTACHMENT
i00374578 SEBP3253
4P2270 CLUTCH GP Parts scheme
  For full view, you need register

Parts for your 3126B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5L-2017 [1] NUT (1-3/4-16-THD)  
  5L-2026 [1] LOCK  
2. 1N-7513 [1] KEY-WOODRUFF  
3. 5L-2016 [1] PLATE-HUB & BACK  
4. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
  9F-5644 [2] LOCKWASHER  
5. 2N-1372 [1] RING-DRIVE  
6. 8B-7121 [2] FITTING-HYDRAULIC (CLUTCH)  
7. 6L-5151 [2] KEY-WOODRUFF  
8. 4B-4756 [1] SHAFT  
9. 1K-2673 [1] YOKE  
10. 5L-9645 [1] HOUSING  
11. 3N-7952 [2] PLATE-DRIVE  
12. 5D-2751 [6] WASHER-SPRING (0.406X0.687X0.125-IN THK)  
13. 4B-4787 [1] LEVER AS  
  0S-1587 [1] BOLT (1/2-13X1.75-IN)  
14. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)(CLUTCH)  
15. 9S-1354 [1] NUT (5/8-18-THD)  
  6F-0253 [1] LOCKWASHER  
16. 2A-4576 [2] CUP-BEARING (TAPERED ROLLER)  
  5L-9656 [2] CONE-BEARING (TAPERED ROLLER)  
17. 5L-9648 [1] RETAINER-BEARING  
18. 4B-4775 [1] HOSE AS  
19. 2H-3755 [1] BOLT (5/16-18X0.43-IN)  
  3F-9556 [1] LOCKWASHER  
20. 7L-0116 [1] LOCK  
  5B-6159 [1] SETSCREW-POINT  
21. 5N-6094 [1] SHAFT-CLUTCH  
22. 5L-9647 [1] SLEEVE-SLIDING  
23. 5B-5251 [6] LINK  
  6L-3965 [6] PIN  
  3B-4613 [6] PIN-COTTER  
24. 2L-8262 [1] RING-ADJUSTMENT  
25. 2L-8259 [3] LEVER  
26. 6L-3966 [3] PIN  
  3B-5301 [3] PIN-COTTER  
27. 3N-7953 [1] PLATE AS  
28. 3N-7955 [1] SPRING  
29. 3N-7954 [1] LOCK PIN  
30. 5L-2012 [1] PLATE-CENTER  
31. 1K-2811 [1] COLLAR AS  
  [2] BOLT  
  2L-6267 [2] LOCKNUT (3/8-24-THD)  
  1K-3621 B [2] SHIM  
32. 108-3561 [1] PLATE-INSTRUCTION (POWER TAKE-OFF)  
33. 1H-3338 [2] LOCKWASHER (EXTERNAL TOOTH)  
  1S-7443 [2] SCREW-MACHINE  
34. 108-3560 [1] PLATE-WARNING (POWER TAKE-OFF)  
  B   USE AS REQUIRED
 

#SEBP32530067
 

4P-3073: CLUTCH GP

4P-3073 CLUTCH GP
PART OF 4P-3074 POWER TAKE-OFF GP
FOR USE WITH SAE NO. 1 FLYWHEEL AND FLYWHEEL HOUSING
AN ATTACHMENT
i00375417 SEBP3253
4P3073 CLUTCH GP Parts scheme
  For full view, you need register

Parts for your 3126B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4L-3527 [2] PLATE-CLUTCH DRIVING  
2. 5L-9652 [1] HUB  
3. 8B-7987 [1] KEY-WOODRUFF  
4. 5L-9653 [1] NUT  
  5L-9654 [1] LOCK  
5. 3H-9571 [1] PLATE-CENTER  
6. 5N-9317 [1] RING-DRIVE  
7. 7F-8897 [1] PLATE  
8. 3H-9572 [1] RING-ADJUSTMENT  
9. 3H-9574 [1] SLEEVE  
10. 4B-4754 [1] SHAFT  
  6L-5151 [2] KEY-WOODRUFF  
11. 4B-4792 [1] YOKE AS  
12. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
  3B-4506 [2] LOCKWASHER  
13. 1A-1460 [6] BOLT (1/2-13X2-IN)  
  5P-8245 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
14. 5L-9655 [1] RETAINER-BEARING  
15. 9S-1354 [1] NUT (5/8-18-THD)  
  6F-0253 [1] LOCKWASHER  
16. 4B-4716 [1] COLLAR AS-SLEEVE  
17. 0L-0639 [2] BOLT (3/8-24X2.25-IN)  
  2L-6267 [2] LOCKNUT (3/8-24-THD)  
  4B-4758 B [2] SHIM (0.06-IN THK)  
18. 0S-1617 [1] BOLT (5/16-18X0.75-IN)  
  3F-9556 [1] LOCKWASHER  
  5B-2407 [1] LOCK  
19. 5B-2410 E [1] HOSE AS (38.1-CM)  
20. 4B-4721 [8] LINK  
  6L-3967 [8] PIN  
  3B-5301 [8] PIN-COTTER  
21. 6L-3972 [4] PIN  
  3B-4627 [4] PIN-COTTER  
  1L-4863 [8] WASHER-SPRING  
22. 4H-0002 [4] LEVER  
23. 108-3561 [1] PLATE-INSTRUCTION (POWER TAKE-OFF)(SERVICING)  
24. 3N-8125 [1] PLATE AS-PRESSURE  
25. 3N-8124 [1] SPRING  
  3N-8123 [1] LOCK PIN  
26. 8B-7121 [2] FITTING-HYDRAULIC (CLUTCH)  
27. 3N-4896 [1] SHAFT-CLUTCH  
28. 1S-7443 [4] SCREW-MACHINE  
  1H-3338 [4] LOCKWASHER (EXTERNAL TOOTH)  
29. 6B-3223 [2] CUP-BEARING  
30. 4B-7270 [2] CONE-BEARING  
31. 4B-4810 [1] LEVER AS-HAND  
32. 7F-8916 [1] CARRIER-BEARING  
33. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)(CLUTCH)  
34. 7W-7155 [1] HOUSING-CLUTCH  
35. 108-3560 [1] PLATE-WARNING (POWER TAKE-OFF)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
 

#SEBP32530068
 

4W-2650: CLUTCH GP

4W-2650 CLUTCH GP
PART OF 4W-2651 POWER TAKE-OFF GP
AN ATTACHMENT
i00378753 SEBP3253
4W2650 CLUTCH GP Parts scheme
  For full view, you need register

Parts for your 3126B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5N-9315 [1] RING-DRIVE (72-TEETH)  
2. 6L-3966 [3] PIN  
  6L-3964 [3] PIN-COTTER  
  5D-2751 [6] WASHER-SPRING (0.406X0.687X0.125-IN THK)  
3. 2L-8262 [1] RING-ADJUSTMENT  
4. 108-3561 [1] PLATE-INSTRUCTION (POWER TAKE-OFF)  
  108-3560 [1] PLATE-WARNING (POWER TAKE-OFF)  
  1L-6931 [2] SCREW AS-MACHINE (1/4-20X0.5-IN)  
5. 4W-2652 [1] LEVER AS-HAND  
  0S-1587 [1] BOLT (1/2-13X1.75-IN)  
6. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)(CLUTCH)  
7. 9S-1354 [1] NUT (5/8-18-THD)  
  6F-0253 [1] LOCKWASHER  
8. 4B-4775 [1] HOSE AS  
9. 2H-3755 [1] BOLT (5/16-18X0.43-IN)  
  3F-9556 [1] LOCKWASHER  
10. 7L-0116 [1] LOCK  
11. 5B-6159 [1] SETSCREW-POINT  
12. 5L-4202 [1] HOUSING-CLUTCH  
13. 6B-3224 [2] CUP-BEARING (TAPERED ROLLER)  
14. 4B-7255 [2] CONE-BEARING  
15. 4W-2649 [1] SHAFT-CLUTCH  
16. 2L-8259 [3] LEVER  
17. 1L-9087 [1] KEY  
18. 492-3073 [1] WASHER-LOCK  
19. 2L-8260 [1] SLEEVE-SLIDING  
20. 2N-9363 [1] RETAINER-BEARING  
21. 8B-7121 [2] FITTING-HYDRAULIC (CLUTCH)  
22. 4B-4715 [1] COLLAR AS  
  0L-0639 [2] BOLT (3/8-24X2.25-IN)  
  2L-6267 [2] LOCKNUT (3/8-24-THD)  
  4B-4722 B [2] SHIM  
23. 6L-5151 [2] KEY-WOODRUFF  
24. 4B-4756 [1] SHAFT  
25. 4B-4725 [1] YOKE  
26. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
  9F-5644 [2] LOCKWASHER  
27. 6L-3965 [6] PIN  
  6L-3960 [6] PIN-COTTER  
28. 5B-5251 [6] LINK  
29. 3N-7953 [1] PLATE AS  
  3N-7954 [1] LOCK PIN  
  3N-7955 [1] SPRING  
30. 3N-7952 [1] PLATE-DRIVE  
31. 2L-8256 [1] PLATE-HUB & BACK  
32. 2L-8257 [1] NUT-HUB  
   
    AVAILABLE REPAIR KIT(S):
  5N-3789 Y [1] CLUTCH AS  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP32530069
 

163-0872: COMPRESSOR GP-REFRIGERANT

163-0872 COMPRESSOR GP-REFRIGERANT
PART OF 197-4562 COMPRESSOR GP-REFRIGERANT
FIELD REPLACEMENT ORDER @@@@@394-9671@@@@@
AN ATTACHMENT
i01265410 SEBP3253
1630872 COMPRESSOR GP-REFRIGERANT Parts scheme
  For full view, you need register

Parts for your 3126B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 314-4018 [1] VALVE AS-PRESSURE RELIEF (REFRIGERANT COMPRESSOR)  
3. 7T-4532 [1] PLUG AS  
4. 9X-7385 [2] SEAL-O-RING  
5. 180-9339 [2] PIN-CONNECTOR (14-GA TO 18-GA)  
 

Information:

Specifications
Camshaft
3126B Industrial Engine
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Information Release Memo
PRODUCT LINE ADDITIONS: REMANUFACTURED LONG BLOCKS FOR CERTAIN 3100, C-15 AND 3400 SERIES ENGINE APPLICATIONS
PRODUCT LINE ADDITIONS: REMANUFACTURED LONG BLOCKS FOR CERTAIN 3100, C-15 AND 3400 SERIES ENGINE APPLICATIONS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Excessive Bearing Wear - Inspect
3126B Industrial Engine
Disassembly and Assembly
Camshaft Bearings - Remove and Install
3126B Industrial Engine
Camshaft - Remove
3126B Industrial Engine
Camshaft Gear - Remove and Install
3126B Industrial Engine
Camshaft Gear - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Camshaft - Install
3126B Engines for Caterpillar Built Machines
Camshaft - Remove
3126B Engines for Caterpillar Built Machines
Camshaft - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Camshaft - Install
3126B Industrial Engine
Camshaft - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog 3126B :

BELT-SERPENTINE
227-1364 BELT-SERPENTINE
BELT-SERPENTINE
222-5511 BELT-SERPENTINE
BELT-SERPENTINE
203-7765 BELT-SERPENTINE
BELT TIGHTENER GP
258-6667 BELT TIGHTENER GP
BELT TIGHTENER GP
203-9715 BELT TIGHTENER GP
BELT TIGHTENER GP
203-9715 BELT TIGHTENER GP
BELT TENSIONER GP
238-4738 BELT TENSIONER GP
BELT TENSIONER GP
198-9766 BELT TENSIONER GP
CAMSHAFT GP
216-7922 CAMSHAFT GP
CARRIER GP-SEAL
132-3844 CARRIER GP-SEAL
CARRIER GP-SEAL
4W-3462 CARRIER GP-SEAL
CLUTCH AS
5N-3789 CLUTCH AS
CLUTCH GP
3N-9097 CLUTCH GP
CLUTCH GP
4P-2270 CLUTCH GP
CLUTCH GP
4P-3073 CLUTCH GP
CLUTCH GP
4W-2650 CLUTCH GP

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.