197-4998 TURBOCHARGER GP -BASIC COMPRESSOR OUTLET IS ORIENTATED 40 DEGREES OUTBOARD FROM TOP VERTICAL ALSO AN ATTACHMENT 3126B



AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
FUEL SYSTEM
FILTER GP-FUEL

INDUSTRIAL ENGINE 3126B INDUSTRIAL ENGINE BEJ
 3126B Industrial Engine BEJ00001-UP SEBP3253 3126B BEJ   (2000)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
TURBOCHARGER GP
191-8028 TURBOCHARGER GP
TURBOCHARGER GP
195-6000 TURBOCHARGER GP
TURBOCHARGER GP
197-4998 TURBOCHARGER GP
TURBOCHARGER GP
199-6064 TURBOCHARGER GP
TURBOCHARGER GP
201-6842 TURBOCHARGER GP
TURBOCHARGER GP
201-6846 TURBOCHARGER GP
 

#SEBP32530630
 

197-4998: TURBOCHARGER GP

197-4998 TURBOCHARGER GP -BASIC
COMPRESSOR OUTLET IS ORIENTATED 40 DEGREES OUTBOARD FROM TOP VERTICAL
ALSO AN ATTACHMENT
i01449815 SEBP3253
1974998 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3126B INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
1. 161-6963 [2] CLAMP  
2. 5P-4536 [1] ELBOW  
3. 177-6920 [1] HOSE  
4. 7C-6670 M [4] BOLT (M8X1.25X12.5-MM)  
5. 174-0128 [1] HOUSING AS-TURBINE  
6. 133-8524 [2] PLATE-CLAMP (TURBINE)  
7. 7M-9918 [1] LOCKNUT (1/4-28-THD)  
8. 158-6072 [1] CLAMP AS (COMPRESSOR)  
9. 192-0953 [1] COVER-COMPRESSOR  
10. 191-8032 [1] CARTRIDGE GP-TURBOCHARGER  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP32530631
 

199-6064: TURBOCHARGER GP

199-6064 TURBOCHARGER GP
S/N BEJ1-161
i01440308 SEBP3253
1996064 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3126B INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
1. 7C-7431 [1] GASKET  
2. 3E-8017 M [4] LOCKNUT (M10X1.5-THD)  
  M   METRIC PART
 

#SEBP32530632
 

201-6842: TURBOCHARGER GP

201-6842 TURBOCHARGER GP -BASIC
FOR USE WITH LOW HP ENGINES WITH FRONT EXHAUST.
FOR USE WITH @@@@@209-6336@@@@@
AN ATTACHMENT
i01496206 SEBP3253
2016842 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3126B INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
1. 161-6963 [2] CLAMP  
2. 5P-4536 [1] ELBOW  
3. 177-6920 [1] HOSE  
4. 7C-6670 M [4] BOLT (M8X1.25X12.5-MM)  
5. 205-9952 [1] HOUSING AS-TURBINE  
6. 7C-6672 [2] PLATE-CLAMP (TURBINE)  
7. 7M-9918 [1] LOCKNUT (1/4-28-THD)  
8. 158-6072 [1] CLAMP AS (COMPRESSOR)  
9. [1] COVER-COMPRESSOR  
10. 201-6844 Y [1] CARTRIDGE GP-TURBOCHARGER  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32530633
 

201-6846: TURBOCHARGER GP

201-6846 TURBOCHARGER GP
FOR USE WITH HIGH HP ENGINES WITH FRONT EXHAUST
FOR USE WITH @@@@@209-6336@@@@@
AN ATTACHMENT
i01496211 SEBP3253
2016846 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3126B INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
1. 161-6963 [2] CLAMP  
2. 5P-4536 [1] ELBOW  
3. 177-6920 [1] HOSE  
4. 7C-6670 M [4] BOLT (M8X1.25X12.5-MM)  
5. 205-9951 [1] HOUSING AS-TURBINE  
6. 133-8524 [2] PLATE-CLAMP (TURBINE)  
7. 7M-9918 [1] LOCKNUT (1/4-28-THD)  
8. 158-6072 [1] CLAMP AS (COMPRESSOR)  
9. 192-0953 [1] COVER-COMPRESSOR  
10. 201-6847 Y [1] CARTRIDGE GP-TURBOCHARGER  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32530634
 

201-9634: TURBOCHARGER GP

201-9634 TURBOCHARGER GP
FOR USE WITH LOW HP ENGINE WITH REAR EXHAUST
ALSO AN ATTACHMENT
i01496284 SEBP3253
2019634 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3126B INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
1. 3E-8017 M [4] LOCKNUT (M10X1.5-THD)  
2. 7C-7431 [1] GASKET  
  M   METRIC PART
 

#SEBP32530635
 

201-9635: TURBOCHARGER GP

201-9635 TURBOCHARGER GP
FOR USE WITH HIGH HP ENGINE WITH REAR EXHAUST
ALSO AN ATTACHMENT
i01496274 SEBP3253
2019635 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3126B INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
1. 3E-8017 M [4] LOCKNUT (M10X1.5-THD)  
2. 7C-7431 [1] GASKET (TURBOCHARGER)  
  M   METRIC PART
 

#SEBP32530636
 

241-9059: TURBOCHARGER GP

241-9059 TURBOCHARGER GP
S/N BEJ9891-UP
PART OF 242-3580 TURBOCHARGER GP
i02213745 SEBP3253
2419059 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3126B INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
1. 120-2243 [3] PLATE-CLAMP (TURBINE)  
2. 120-2244 M [6] BOLT (M8X1.25X14-MM)  
3. 135-2648 [1] HOUSING AS-TURBINE  
3A. 4K-0149 [7] PLUG-CUP  
4. 158-6072 [1] CLAMP AS (COMPRESSOR)  
5. 224-4859 Y [1] CARTRIDGE GP-TURBOCHARGER  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP32530637
 

242-3580: TURBOCHARGER GP

242-3580 TURBOCHARGER GP
S/N BEJ9891-UP
i02185652 SEBP3253
2423580 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3126B INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
1. 7M-7273 [1] GASKET (TURBOCHARGER)  
2. 241-9059 Y [1] TURBOCHARGER GP (BASIC)  
3. 3E-8017 M [4] LOCKNUT (M10X1.5-THD)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP32530638
 

210-2610: BRACKET GP-MOUNTING

210-2610 BRACKET GP-MOUNTING
PROVIDES HIGH, REAR LH SIDE PRIMARY FUEL FILTER/WATER SEPARATOR MOUNTING LOCATION
FOR USE WITH @@@@@183-1195@@@@@, @@@@@151-0863@@@@@
CANNOT BE USED WITH @@@@@195-1333@@@@@, @@@@@200-2310@@@@@
AN ATTACHMENT
i01977033 SEBP3253
2102610 BRACKET GP-MOUNTING Parts scheme
  For full view, you need register

Parts for your 3126B INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
1. 239-3046 [1] BRACKET AS  
  8T-3612 M [6] NUT-WELD (M8X1.25-THD)  
2. 4P-7581 [4] CLIP (LADDER)  
3. 6V-5219 M [4] BOLT (M8X1.25X40-MM)  
4. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
 

#SEBP32530639
 

224-7825: BRACKET GP-MOUNTING

224-7825 BRACKET GP-MOUNTING
S/N BEJ10443-UP
PROVIDES A HIGH REAR PRIMARY FUEL FILTER,WATER SEPARATOR
FOR USE WITH @@@@@224-9110@@@@@, 12-VOLT
CANNOT BE USED WITH @@@@@195-1333@@@@@
ALSO AN ATTACHMENT
i02331374 SEBP3253
2247825 BRACKET GP-MOUNTING Parts scheme
  For full view, you need register

Parts for your 3126B INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
1. 240-8818 [1] BRACKET AS  
  8T-3612 M [6] NUT-WELD (M8X1.25-THD)  
2. 4P-8134 [1] CLIP (LADDER)  
3. 6V-5218 M [3] BOLT (M8X1.25X35-MM)  
4. 6V-5219 M [1] BOLT (M8X1.25X40-MM)  
5. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
 

Information:

Engine News
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Operation and Maintenance Manual
Turbocharger - Inspect/Clean
3126B Industrial Engine
Special Instruction
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Turbocharger
3126B Industrial Engine
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
CAT REMAN ANNOUNCES EXPANDED TURBOCHARGER AND CARTRIDGE COVERAGE FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES EXPANDED TURBOCHARGER AND CARTRIDGE COVERAGE FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES EXPANDED TURBOCHARGER AND CARTRIDGE COVERAGE FOR CERTAIN 3116, 3126, C-7, C7, C-9, C9, 3306, 3406, C-15, AND 3412 ENGINE MODELS
CAT REMAN ANNOUNCES EXPANDED TURBOCHARGER AND CARTRIDGE COVERAGE FOR CERTAIN 3116, 3126, C-7, C7, C-9, C9, 3306, 3406, C-15, AND 3412 ENGINE MODELS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Turbocharger - Inspect
3126B Industrial Engine
Turbocharger - Inspect
3114, 3116, and 3126 Engines
Disassembly and Assembly
Turbocharger - Remove
3126B Engines for Caterpillar Built Machines
Turbocharger - Disassemble
3126B Engines for Caterpillar Built Machines
Turbocharger - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Turbocharger - Assemble
3126B Engines for Caterpillar Built Machines
Turbocharger - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Turbocharger - Install
3126B Engines for Caterpillar Built Machines
Turbocharger - Install
3126B Industrial Engine
Turbocharger - Remove
3126B Industrial Engine
Service Magazine
Troubleshooting the Wastegate Canister {1052, 1057}
2009/01/26
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 3126B :

TURBOCHARGER GP
195-6000 TURBOCHARGER GP
TURBOCHARGER GP
191-8028 TURBOCHARGER GP
TURBOCHARGER GP
191-8024 TURBOCHARGER GP
TURBOCHARGER GP
191-8019 TURBOCHARGER GP
SPACER GP-INLET MANIFOLD
279-6624 SPACER GP-INLET MANIFOLD
SHUTOFF GP-AIR
248-5564 SHUTOFF GP-AIR
PRECLEANER GP
6C-5405 PRECLEANER GP
PRECLEANER GP
285-9237 PRECLEANER GP
TURBOCHARGER GP
199-6064 TURBOCHARGER GP
TURBOCHARGER GP
201-6842 TURBOCHARGER GP
TURBOCHARGER GP
201-6846 TURBOCHARGER GP
TURBOCHARGER GP
201-9634 TURBOCHARGER GP
TURBOCHARGER GP
201-9635 TURBOCHARGER GP
TURBOCHARGER GP
241-9059 TURBOCHARGER GP
TURBOCHARGER GP
242-3580 TURBOCHARGER GP
BRACKET GP-MOUNTING
210-2610 BRACKET GP-MOUNTING

Truck sale: