ELECTRICAL AND STARTING SYSTEM
CAMERA GPCONNECTION GP
ELECTRONICS GP-ENGINE
SHUTOFF GP
ELECTRICAL AND STARTING SYSTEM
CAMERA GP
#SEBP32530740
336-6897: CAMERA GP
For full view, you need register
Parts for your 3126B INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| AVAILABLE REPAIR KIT(S): | ||||
| 251-4162 | [1] | KIT-BRACKET (CAMERA) | ||
| (KIT INCLUDES BRACKET, BOLTS, LOCKNUTS, SOCKET BOLTS, GASKET, & ALLEN KEY) | ||||
#SEBP32530741
200-2310: CONNECTION GP-ELECTRICAL
200-2310 CONNECTION GP-ELECTRICAL
THROTTLE POSITION SENSOR, PROVIDES WIRE REMOVAL TOOL
AN ATTACHMENT
THROTTLE POSITION SENSOR, PROVIDES WIRE REMOVAL TOOL
AN ATTACHMENT
For full view, you need register
Parts for your 3126B INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 133-0969 | [1] | CONNECTOR-SOCKET (16-GA TO 18-GA)(40 PIN CONNECTOR) | ||
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA)(THROTTLE POSITION SENSOR) | ||
| 8T-9834 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3132 | [2] | SEAL-CONNECTOR (40-PIN) | ||
| 8T-8737 | [36] | PLUG-SEAL (40 PIN CONNECTOR) | ||
| 8T-8732 | [1] | RECEPTACLE-CONNECTOR (3-PIN)(THROTTLE POSITION SENSOR) | ||
| 9W-0844 | [3] | SOCKET-CONNECTOR (14-GA TO 16-GA)(THROTTLE POSITION SENSOR) | ||
| 9X-3402 | [39] | SOCKET-CONNECTOR (16-GA TO 18-GA)(40 PIN CONNECTOR) | ||
| 151-6320 | [2] | TOOL-WIRE REMOVAL | ||
| M | METRIC PART | |||
#SEBP32530742
183-1195: CONTROL & MTG GP-ENGINE ELEK
183-1195 CONTROL & MTG GP-ENGINE ELEK
FUEL COOLED
Type 1
ALSO AN ATTACHMENT
FUEL COOLED
Type 1
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 3126B INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8S-4950 | [1] | CAP (FLARED 37-DEG)(37 DEGREE FLARED) | |
| 2. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 3. | 101-3128 | [2] | SPACER-SPECIAL | |
| 4. | 169-3111 | [2] | SPACER | |
| 5. | 179-9850 | [1] | CONTROL GP-ENGINE ELECTRONIC | |
| 5A. | 7X-6315 | [1] | STRAP AS-GROUND | |
| 5B. | 184-2472 | [1] | SCREW-PAN HEAD (8-32X0.375-IN) | |
| 5C. | 134-4126 | [1] | WASHER (4.52X8.28X0.76-MM THK) | |
| 6. | 5P-8347 M | [2] | BOLT (M8X1.25X70-MM) | |
| 7. | 6V-5223 M | [2] | BOLT (M8X1.25X100-MM) | |
| 8. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 9N-0869 | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP32530743
183-1195: CONTROL & MTG GP-ENGINE ELEK
183-1195 CONTROL & MTG GP-ENGINE ELEK
FUEL COOLED
Type 2
ALSO AN ATTACHMENT
FUEL COOLED
Type 2
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 3126B INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8S-4950 | [1] | CAP (FLARED 37-DEG)(37 DEGREE FLARED) | |
| 2. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 3. | 101-3128 | [2] | SPACER-SPECIAL | |
| 4. | 169-3111 | [2] | SPACER | |
| 5. | 210-0849 CY | [1] | CONTROL GP-ENGINE ELECTRONIC | |
| 6. | 5P-8347 M | [2] | BOLT (M8X1.25X70-MM) | |
| 7. | 6V-5223 M | [2] | BOLT (M8X1.25X100-MM) | |
| 8. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 9N-0869 | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32530744
198-1724: CONTROL & MTG GP-ENGINE ELEK
198-1724 CONTROL & MTG GP-ENGINE ELEK
S/N BEJ1-1227
FUEL COOLED
FOR USE WITH @@@@@195-1333@@@@@
AN ATTACHMENT
S/N BEJ1-1227
FUEL COOLED
FOR USE WITH @@@@@195-1333@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 3126B INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8S-4950 | [1] | CAP (FLARED 37-DEG) | |
| 2. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 3. | 101-3128 | [2] | SPACER-SPECIAL | |
| 4. | 169-3111 | [2] | SPACER | |
| 5. | 178-3091 Y | [1] | CONTROL GP-ENGINE ELECTRONIC | |
| 6. | 5P-8347 M | [2] | BOLT (M8X1.25X70-MM) | |
| 7. | 6V-5223 M | [2] | BOLT (M8X1.25X100-MM) | |
| 8. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 9N-0869 | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32530745
198-1724: CONTROL & MTG GP-ENGINE ELEK
198-1724 CONTROL & MTG GP-ENGINE ELEK
S/N BEJ1228-UP
FUEL COOLED
FOR USE WITH @@@@@195-1333@@@@@
AN ATTACHMENT
S/N BEJ1228-UP
FUEL COOLED
FOR USE WITH @@@@@195-1333@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 3126B INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8S-4950 | [1] | CAP (FLARED 37-DEG) | |
| 2. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 3. | 101-3128 | [2] | SPACER-SPECIAL | |
| 4. | 169-3111 | [2] | SPACER | |
| 5. | 210-0849 CY | [1] | CONTROL GP-ENGINE ELECTRONIC | |
| 6. | 5P-8347 M | [2] | BOLT (M8X1.25X70-MM) | |
| 7. | 6V-5223 M | [2] | BOLT (M8X1.25X100-MM) | |
| 8. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 9N-0869 | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32530746
242-5032: CONTROL & MTG GP-ENGINE ELEK
242-5032 CONTROL & MTG GP-ENGINE ELEK
TO PROVIDE A FUEL COOLED ECM
FOR USE WITH @@@@@229-5493@@@@@
AN ATTACHMENT
TO PROVIDE A FUEL COOLED ECM
FOR USE WITH @@@@@229-5493@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 3126B INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 2. | 8T-9658 | [2] | SPACER (8.2X12.7X25.4-MM THK) | |
| 3. | 162-8745 | [1] | BRACKET AS | |
| 4. | 164-5626 | [1] | BRACKET AS | |
| 5. | 164-5636 | [2] | SPACER | |
| 6. | 240-5304 Y | [1] | CONTROL GP-ENGINE ELECTRONIC | |
| 7. | 099-3649 M | [2] | BOLT (M8X1.25X40-MM) | |
| 8. | 101-3128 | [2] | SPACER-SPECIAL | |
| 9. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 10. | 6V-5221 M | [1] | BOLT (M8X1.25X80-MM) | |
| 11. | 6V-5223 M | [1] | BOLT (M8X1.25X100-MM) | |
| 12. | 8T-0292 M | [1] | BOLT (M8X1.25X90-MM) | |
| 13. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 14. | 8T-6869 M | [2] | BOLT (M8X1.25X60-MM) | |
| 15. | 9N-0869 | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32530747
133-3329: CONTROL GP-AUTO START/STOP
133-3329 CONTROL GP-AUTO START/STOP
CANNOT BE USED WITH A RADIATOR
AN ATTACHMENT
CANNOT BE USED WITH A RADIATOR
AN ATTACHMENT
For full view, you need register
Parts for your 3126B INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6T-7337 | [1] | METER GP-SERVICE | |
| 2. | 111-1325 | [1] | BLOCK-CONTACT (2-POLE) | |
| 3. | 109-6507 | [1] | SWITCH AS-PUSH BUTTON (EMERGENCY STOP) | |
| 4. | 3E-0156 | [1] | SWITCH GP-START (IGNITION) | |
| 5. | 2N-2371 | [1] | LAMP AS-INDICATOR (RED)(ACTION) | |
| 2V-7088 | [1] | LENS-RED (INDICATOR) | ||
| 6V-8367 | [1] | LOCKWASHER | ||
| 6V-8382 | [1] | NUT-HEX (11/16-27-THD) | ||
| 6V-8817 | [2] | SCREW-MACHINE (4-36X4.76-IN) | ||
| 6. | 6T-3643 | [2] | CIRCUIT BREAKER AS (15-AMPERE) | |
| 7. | 125-1302 Y | [1] | SWITCH GP-MAGNETIC (24-VOLT)(STARTING MOTOR) | |
| 8. | 7D-0894 | [6] | SCREW-HEAD | |
| 9. | 137-2114 | [1] | HARNESS AS-WIRING (AUTO START/STOP CONTROL) | |
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN)(AUTO START/STOP WIRING HARNESS) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN)(AUTO START/STOP WIRING HARNESS) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN)(AUTO START/STOP WIRING HARNESS) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 127-5485 | [1] | PLUG AS-CONNECTOR (1-PIN) | ||
| 10. | 3K-9520 | [1] | GROMMET | |
| 11. | 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 12. | 6V-8185 | [2] | NUT (1/4-20-THD) | |
| 13. | 4M-5281 | [2] | BOLT (1/4-20X0.75-IN) | |
| 14. | 110-7884 | [1] | SWITCH AS-TOGGLE (MOMENTARY)(MANUAL ENGINE SPEED CONTROL) | |
| 15. | 137-2133 | [1] | PLATE | |
| 16. | 137-2113 | [1] | ENCLOSURE | |
| 17. | 5P-8500 | [1] | KEY (IGNITION) | |
| 18. | 137-5135 | [2] | BRACKET | |
| 19. | 9F-8125 | [8] | LOCKWASHER | |
| 20. | 4B-1237 | [8] | SCREW-MACHINE (10-32X12.7-MM) | |
| 21. | 3E-8035 | [4] | SCREW-MACHINE | |
| 22. | 7N-5876 | [2] | LAMP (24-VOLT, 0.2-AMPERE) | |
| 23. | 141-9228 | [1] | LAMP AS (INDICATOR) | |
| 2V-7087 | [1] | LENS-AMBER (INDICATOR) | ||
| 6V-8367 | [1] | LOCKWASHER | ||
| 6V-8382 | [1] | NUT-HEX (11/16-27-THD) | ||
| 6V-8817 | [2] | SCREW-MACHINE (4-36X4.76-IN) | ||
| 24. | 142-2245 | [1] | FILM-CONTROL PANEL (TEXT/GRAPHIC) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32530748
195-1345: CONTROL GP-AUTO START/STOP
195-1345 CONTROL GP-AUTO START/STOP
FOR USE WITH 24-VOLT WIRING SYSTEM
AN ATTACHMENT
FOR USE WITH 24-VOLT WIRING SYSTEM
AN ATTACHMENT
For full view, you need register
Parts for your 3126B INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9W-1494 | [1] | KIT-SERVICE METER (24-VOLT)(INSTRUMENT PANEL) | |
| (INCLUDES SERVICE METER & SERVICE FILM) | ||||
| 2. | 111-1325 | [1] | BLOCK-CONTACT (2-POLE) | |
| 3. | 109-6507 | [1] | SWITCH AS-PUSH BUTTON (SECONDARY STOP) | |
| 4. | 3E-0156 | [1] | SWITCH GP-START (IGNITION) | |
| 6V-8362 | [1] | SCREW-MACHINE (8-32X0.31-IN) | ||
| 7T-6799 | [1] | NUT-MOUNTING (1-32-THD) | ||
| 9B-7233 | [1] | LOCKWASHER | ||
| 5. | 2N-2371 | [1] | LAMP AS-INDICATOR (RED) | |
| 2V-7088 | [1] | LENS-RED (INDICATOR) | ||
| 6V-8367 | [1] | LOCKWASHER | ||
| 6V-8382 | [1] | NUT-HEX (11/16-27-THD) | ||
| 6V-8817 | [2] | SCREW-MACHINE (4-36X4.76-IN) | ||
| 6. | 6T-3643 | [2] | CIRCUIT BREAKER AS (15-AMPERE) | |
| (EACH INCLUDES) | ||||
| 6V-8376 | [2] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 7. | 125-1302 Y | [1] | SWITCH GP-MAGNETIC (24-VOLT)(STARTING MOTOR) | |
| 9. | 195-1344 | [1] | HARNESS AS-WIRING (AUTO START/STOP CONTROL) | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 127-5486 | [1] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 10. | 3K-9520 | [1] | GROMMET | |
| 11. | 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 12. | 6V-8185 | [2] | NUT (1/4-20-THD) | |
| 13. | 4M-5281 | [2] | BOLT (1/4-20X0.75-IN) | |
| 14. | 110-7884 | [1] | SWITCH AS-TOGGLE (MOMENTARY)(SPEED CONTROL) | |
| 3L-8187 | [3] | LOCKWASHER | ||
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 6V-8374 | [3] | SCREW-MACHINE (6-32X0.25-IN) | ||
| 15. | 137-2133 | [1] | PLATE | |
| 16. | 137-2113 | [1] | ENCLOSURE | |
| 17. | 5P-8500 | [1] | KEY (IGNITION) | |
| 18. | 137-5135 | [2] | BRACKET | |
| 19. | 9F-8125 | [8] | LOCKWASHER | |
| 20. | 4B-1237 | [8] | SCREW-MACHINE (10-32X12.7-MM) | |
| 21. | 3E-8035 | [4] | SCREW-MACHINE | |
| 22. | 7N-5876 | [2] | LAMP (24-VOLT, 0.2-AMPERE) | |
| 23. | 141-9228 | [1] | LAMP AS (INDICATOR) | |
| 2V-7087 | [1] | LENS-AMBER (INDICATOR) | ||
| 6V-8367 | [1] | LOCKWASHER | ||
| 6V-8382 | [1] | NUT-HEX (11/16-27-THD) | ||
| 6V-8817 | [2] | SCREW-MACHINE (4-36X4.76-IN) | ||
| 24. | 142-2245 | [1] | FILM-CONTROL PANEL | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32530749
205-8657: CONTROL GP-AUTO START/STOP
205-8657 CONTROL GP-AUTO START/STOP
FOR USE WITH 12-VOLT WIRING SYSTEM
AN ATTACHMENT
FOR USE WITH 12-VOLT WIRING SYSTEM
AN ATTACHMENT
For full view, you need register
Parts for your 3126B INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9W-1494 | [1] | KIT-SERVICE METER (24-VOLT)(INSTRUMENT PANEL) | |
| (INCLUDES SERVICE METER & SERVICE FILM ) | ||||
| 2. | 111-1325 | [1] | BLOCK-CONTACT (2-POLE) | |
| 3. | 109-6507 | [1] | SWITCH AS-PUSH BUTTON (SECONDARY STOP) | |
| 4. | 3E-0156 | [1] | SWITCH GP-START (IGNITION) | |
| 6V-8362 | [1] | SCREW-MACHINE (8-32X0.31-IN) | ||
| 7T-6799 | [1] | NUT-MOUNTING (1-32-THD) | ||
| 9B-7233 | [1] | LOCKWASHER | ||
| 5. | 2N-2371 | [1] | LAMP AS-INDICATOR (RED) | |
| 2V-7088 | [1] | LENS-RED (INDICATOR) | ||
| 6V-8367 | [1] | LOCKWASHER | ||
| 6V-8382 | [1] | NUT-HEX (11/16-27-THD) | ||
| 6V-8817 | [2] | SCREW-MACHINE (4-36X4.76-IN) | ||
| 6. | 6T-3643 | [2] | CIRCUIT BREAKER AS (15-AMPERE) | |
| (EACH INCLUDES) | ||||
| 6V-8376 | [2] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 7. | 125-1303 | [1] | SWITCH GP-MAGNETIC (12-VOLT)(STARTING MOTOR) | |
| 8. | 7D-0894 | [6] | SCREW-HEAD | |
| 9. | 195-1344 | [1] | HARNESS AS-WIRING (AUTO START/STOP CONTROL) | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 10. | 3K-9520 | [1] | GROMMET | |
| 11. | 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 12. | 6V-8185 | [2] | NUT (1/4-20-THD) | |
| 13. | 4M-5281 | [2] | BOLT (1/4-20X0.75-IN) | |
| 14. | 110-7884 | [1] | SWITCH AS-TOGGLE (MOMENTARY)(SPEED CONTROL) | |
| 3L-8187 | [3] | LOCKWASHER | ||
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 6V-8374 | [3] | SCREW-MACHINE (6-32X0.25-IN) | ||
| 15. | 137-2133 | [1] | PLATE | |
| 16. | 137-2113 | [1] | ENCLOSURE | |
| 17. | 5P-8500 | [1] | KEY (IGNITION) | |
| 18. | 137-5135 | [2] | BRACKET | |
| 19. | 9F-8125 | [8] | LOCKWASHER | |
| 20. | 4B-1237 | [8] | SCREW-MACHINE (10-32X12.7-MM) | |
| 21. | 3E-8035 | [4] | SCREW-MACHINE | |
| 22. | 2N-2372 | [2] | LAMP (12-VOLT) | |
| 23. | 141-9228 | [1] | LAMP AS (INDICATOR) | |
| 2V-7087 | [1] | LENS-AMBER (INDICATOR) | ||
| 6V-8367 | [1] | LOCKWASHER | ||
| 6V-8382 | [1] | NUT-HEX (11/16-27-THD) | ||
| 6V-8817 | [2] | SCREW-MACHINE (4-36X4.76-IN) | ||
| 24. | 142-2245 | [1] | FILM-CONTROL PANEL | |
