ELECTRICAL AND STARTING SYSTEM
HEATER GPCONTROL GP-ELECTRONIC
WIRING GP
ELECTRONICS GP
SOLENOID GP
ELECTRICAL AND STARTING SYSTEM
HEATER GP
#SEBP32530790
121-4390: HEATER GP-JACKET WATER
121-4390 HEATER GP-JACKET WATER
120-VOLT, 1000-WATT. REAR EXHAUST
FOR USE WITH EXHAUST TO REAR TURBO
AN ATTACHMENT
120-VOLT, 1000-WATT. REAR EXHAUST
FOR USE WITH EXHAUST TO REAR TURBO
AN ATTACHMENT
For full view, you need register
Parts for your 3126B INDUSTRIAL ENGINE:
CATERPILLAR SIS#SEBP32530791
132-2455: HEATER GP-JACKET WATER
132-2455 HEATER GP-JACKET WATER
S/N BEJ10443-UP
120 VOLT, 1000-WATT. RH
FOR USE WITH @@@@@296-8073@@@@@, EXHAUST TO FRONT TURBOCHARGERS
CANNOT BE USED WITH LH MOUNTED OIL FILTER
ALSO AN ATTACHMENT
S/N BEJ10443-UP
120 VOLT, 1000-WATT. RH
FOR USE WITH @@@@@296-8073@@@@@, EXHAUST TO FRONT TURBOCHARGERS
CANNOT BE USED WITH LH MOUNTED OIL FILTER
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 3126B INDUSTRIAL ENGINE:
CATERPILLAR SIS#SEBP32530792
132-2457: HEATER GP-JACKET WATER
132-2457 HEATER GP-JACKET WATER
240 VOLT
Type 1
FOR USE WITH EXHAUST TO REAR TURBOCHARGERS
CANNOT BE USED WITH LH MTD OIL FILTER
AN ATTACHMENT
240 VOLT
Type 1
FOR USE WITH EXHAUST TO REAR TURBOCHARGERS
CANNOT BE USED WITH LH MTD OIL FILTER
AN ATTACHMENT
For full view, you need register
Parts for your 3126B INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4N-8227 | [1] | CORD AS-HEATER ELEMENT (240-VOLT, 15-AMPERE) | |
| 2. | 4P-2949 | [1] | SHIELD-HEAT | |
| 3. | 8T-4200 M | [1] | BOLT (M8X1.25X16-MM) | |
| 4. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 5. | 124-0687 | [1] | ELEMENT AS-JACKET WATER HEATER (240-VOLT, 1000-WATT) | |
| 6. | 133-6517 | [1] | CAP AS-DUST (JACKET WATER HEATER) | |
| 132-1448 | [1] | KIT-SEAL | ||
| (INCLUDES SEALS, SPACER, & RINGS) | ||||
| M | METRIC PART | |||
#SEBP32530793
132-2457: HEATER GP-JACKET WATER
132-2457 HEATER GP-JACKET WATER
240 VOLT
Type 2
FOR USE WITH EXHAUST TO REAR TURBOCHARGERS
CANNOT BE USED WITH LH MTD OIL FILTER
AN ATTACHMENT
240 VOLT
Type 2
FOR USE WITH EXHAUST TO REAR TURBOCHARGERS
CANNOT BE USED WITH LH MTD OIL FILTER
AN ATTACHMENT
For full view, you need register
Parts for your 3126B INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 2. | 4P-2949 | [1] | SHIELD-HEAT | |
| 3. | 8T-4200 M | [1] | BOLT (M8X1.25X16-MM) | |
| 4. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 5. | 124-0687 | [1] | ELEMENT AS-JACKET WATER HEATER (240-VOLT, 1000-WATT) | |
| 6. | 133-6517 | [1] | CAP AS-DUST (JACKET WATER HEATER) | |
| 132-1448 | [1] | KIT-SEAL | ||
| (INCLUDES SEALS, SPACER, & RINGS) | ||||
| M | METRIC PART | |||
#SEBP32530794
426-5362: INSTALLATION GP-COMMUNICATION
426-5362 INSTALLATION GP-COMMUNICATION -PLE601 NETWORK MANAGER
FIELD INSTALLATION
FIELD INSTALLATION
For full view, you need register
Parts for your 3126B INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 360-4226 Y | [1] | HARNESS AS-CONTROL | ||
| 7X-2534 M | [4] | BOLT (M6X1X50-MM) | ||
| 417-4722 | [1] | CONTROL GP-COMMUNICATION (NETWORK MANAGER) | ||
| 8C-5607 | [8] | MOUNT-ISOLATION | ||
| 344-5673 M | [4] | NUT (M6X1-THD) | ||
| 8C-5608 | [4] | SPACER (6.5X9.5X25.4-MM THK) | ||
| 7K-1181 | [15] | STRAP-CABLE | ||
| 9X-6165 | [4] | WASHER (6.5X22X2.5-MM THK) | ||
| 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32530795
426-5363: INSTALLATION GP-COMMUNICATION
426-5363 INSTALLATION GP-COMMUNICATION -PL641 CELLULAR
FIELD INSTALLATION
FIELD INSTALLATION
For full view, you need register
Parts for your 3126B INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 423-7018 Y | [1] | HARNESS AS-WIRING (PRODUCT LINK RADIO) | ||
| 440-2105 CY | [1] | CONTROL GP-UNPROGRAMMED (PRODUCT LINK ELITE 641 CELLULAR) | ||
| 8T-4971 M | [4] | BOLT (M6X1X30-MM) | ||
| 433-9722 | [1] | FILM-IDENTIFICATION (WIRELESS COM DEVICE, READ OMM) | ||
| 433-9728 | [1] | FILM-WARNING (EXPLOSION, WIRELESS, OMM, U.S.) | ||
| 433-9730 | [1] | FILM-WARNING (EXPLOSION, WIRELESS, OMM, INTL) | ||
| 344-5673 M | [4] | NUT (M6X1-THD) | ||
| 9X-8256 | [8] | WASHER (6.6X12X2-MM THK) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32530796
366-9748: KIT-INJECTOR WIRING HARNESS
366-9748 KIT-INJECTOR WIRING HARNESS
PROVIDES A SERVICE KIT FOR THE ELECTRICAL CONNECTOR
FIELD INSTALLATION
PROVIDES A SERVICE KIT FOR THE ELECTRICAL CONNECTOR
FIELD INSTALLATION
For full view, you need register
Parts for your 3126B INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (INCLUDES WIRE AS) | ||||
#SEBP32530797
210-4309: MODULE GP-INTERFACE
210-4309 MODULE GP-INTERFACE
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your 3126B INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP32530798
274-8068: MODULE GP-INTERFACE
For full view, you need register
Parts for your 3126B INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 466-0772 F | [1] | SOFTWARE GP-ELECTRONIC | ||
| F | NOT SHOWN | |||
#SEBP32530799
145-4925: MOUNTING GP-SOLENOID
145-4925 MOUNTING GP-SOLENOID -STARTING AID
PROVIDES MOUNTING BRACKET FOR AIR INLET HEATER RELAY
FOR USE WITH REMOTE MOUNTED FUEL FILTER
CANNOT BE USED WITH STANDARD FUEL FILTER BASE
PROVIDES MOUNTING BRACKET FOR AIR INLET HEATER RELAY
FOR USE WITH REMOTE MOUNTED FUEL FILTER
CANNOT BE USED WITH STANDARD FUEL FILTER BASE
For full view, you need register
Parts for your 3126B INDUSTRIAL ENGINE:
CATERPILLAR SISInformation:
ELECTRICAL AND STARTING SYSTEM
HEATER GP
Operation and Maintenance Manual
Specifications
Troubleshooting
Disassembly and Assembly
