223-7263 CYLINDER HEAD AS S/N BFM1000-UP WITH PRE-FINISHED VALVE SEAT INSERTS PART OF 243-6741 CYLINDER HEAD AS, 223-9250 CYLINDER HEAD GP C-16



BASIC ENGINE
CYLINDER HEAD GP

INDUSTRIAL ENGINE C-16 INDUSTRIAL ENGINE BFM
 C-16 Industrial Engine BFM00001-UP SEBP3260 C-16 BFM   (2000)

BASIC ENGINE

CYLINDER HEAD GP
CYLINDER HEAD AS
223-7263 CYLINDER HEAD AS
CYLINDER HEAD AS
243-0943 CYLINDER HEAD AS
CYLINDER HEAD AS
243-6741 CYLINDER HEAD AS
CYLINDER HEAD AS
245-4324 CYLINDER HEAD AS
 

#SEBP32600080
 

223-7263: CYLINDER HEAD AS

223-7263 CYLINDER HEAD AS
S/N BFM1000-UP
WITH PRE-FINISHED VALVE SEAT INSERTS
PART OF 243-6741 CYLINDER HEAD AS, 223-9250 CYLINDER HEAD GP
i01877339 SEBP3260
2237263 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your C-16 INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
1. 122-7375 [24] GUIDE-VALVE (STANDARD)  
  122-0447 AB GUIDE-VALVE (0.51-MM OS)  
  122-8612 AB GUIDE-VALVE (0.13-MM OS)  
2. 216-5582 [7] BUSHING (STANDARD)  
  217-0751 AB BUSHING (0.25-MM OS)  
  217-0752 AB BUSHING (0.762-MM OS)  
  261-3429 AB BUSHING (1.778-MM OS)  
  261-3430 AB BUSHING (1.27-MM OS)  
3. 280-3979 [12] INSERT-VALVE SEAT (INLET)(STANDARD)  
4. 226-5561 [12] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  288-4883 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
5. 263-4920 [6] SLEEVE-INJECTOR (INLET)  
8. 166-2904 [12] SEAL-O-RING  
9. 3B-0623 [17] PLUG-CUP  
10. 3B-0645 [20] PLUG-CUP  
11. 8T-6757 [3] PLUG-PIPE  
12. 9X-7430 [6] SEAL-O-RING  
13. 493-9591 [1] HEAD-CYLINDER  
  448-3297 [1] HEAD-CYLINDER  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP32600081
 

243-0943: CYLINDER HEAD AS

243-0943 CYLINDER HEAD AS
S/N BFM1000-2070
PART OF 243-6741 CYLINDER HEAD AS
i01983776 SEBP3260
2430943 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your C-16 INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
1. 152-7582 [12] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  167-0642 AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
  170-4737 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
2. 175-3617 [12] INSERT-VALVE SEAT (INLET)(STANDARD)  
  167-0643 AB INSERT-VALVE SEAT (0.76-MM OS, INLET)  
  170-4738 AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP32600082
 

243-6741: CYLINDER HEAD AS

243-6741 CYLINDER HEAD AS
S/N BFM1000-2070
WITH MACHINE IN PLACE VALVE SEAT INSERTS
PART OF 223-9250 CYLINDER HEAD GP
i01983686 SEBP3260
2436741 CYLINDER HEAD AS Parts scheme 2436741 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your C-16 INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
1. 122-7375 [24] GUIDE-VALVE (STANDARD)  
  122-0447 AB GUIDE-VALVE (0.51-MM OS)  
  122-8612 AB GUIDE-VALVE (0.13-MM OS)  
2. 216-5582 [7] BUSHING (STANDARD)  
  217-0751 AB BUSHING (0.25-MM OS)  
  217-0752 AB BUSHING (0.762-MM OS)  
  261-3429 AB BUSHING (1.778-MM OS)  
  261-3430 AB BUSHING (1.27-MM OS)  
3. 227-4239 [6] SLEEVE-INJECTOR  
4. 243-0943 Y [1] CYLINDER HEAD AS  
    -OR-
  223-7263 Y [1] CYLINDER HEAD AS  
5. 166-2903 [6] SEAL-O-RING  
6. 166-2904 [6] SEAL-O-RING  
7. 3B-0623 [17] PLUG-CUP  
8. 3B-0645 [20] PLUG-CUP  
9. 8T-6757 [3] PLUG-PIPE  
10. 9X-7430 [6] SEAL-O-RING  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP32600083
 

245-4324: CYLINDER HEAD AS

245-4324 CYLINDER HEAD AS
PART OF 183-5296 CYLINDER HEAD GP
i03949631 SEBP3260
2454324 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your C-16 INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
1. 122-7375 [24] GUIDE-VALVE (STANDARD)  
  122-0447 AB GUIDE-VALVE (0.51-MM OS)  
  122-8612 AB GUIDE-VALVE (0.13-MM OS)  
2. 9X-7430 [6] SEAL-O-RING  
3. 216-5582 [7] BUSHING (STANDARD)  
  217-0751 AB BUSHING (0.25-MM OS)  
  217-0752 AB BUSHING (0.762-MM OS)  
  261-3429 AB BUSHING (1.778-MM OS)  
  261-3430 AB BUSHING (1.27-MM OS)  
4. 224-3983 [12] INSERT-SEAT (INLET)(STANDARD)  
  314-3063 AB INSERT-VALVE SEAT (0.55-MM THK)  
  314-3064 AB INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  314-3065 AB INSERT-VALVE SEAT (0.13-MM OS)  
  314-3066 AB INSERT-VALVE SEAT (0.26-MM OS, INLET)  
  314-3067 AB INSERT-VALVE SEAT (0.26-MM OS)  
  314-3068 AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  314-3069 AB INSERT-VALVE SEAT (0.51-MM OS)  
5. 226-5561 [12] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  288-4883 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
6. 263-4920 [6] SLEEVE-INJECTOR (INLET)  
7. 166-2904 [12] SEAL-O-RING  
8. 3B-0623 [17] PLUG-CUP  
9. 3B-0645 [20] PLUG-CUP  
10. 8T-6757 [3] PLUG-PIPE  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP32600084
 

281-1640: CYLINDER HEAD AS

281-1640 CYLINDER HEAD AS
PART OF 263-5055 CYLINDER HEAD GP
i02411332 SEBP3260
2811640 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your C-16 INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
1. 122-7375 [24] GUIDE-VALVE (STANDARD)  
  122-0447 AB GUIDE-VALVE (0.51-MM OS)  
  122-8612 AB GUIDE-VALVE (0.13-MM OS)  
2. 216-5582 [7] BUSHING (STANDARD)  
  217-0751 AB BUSHING (0.25-MM OS)  
  217-0752 AB BUSHING (0.762-MM OS)  
  261-3429 AB BUSHING (1.778-MM OS)  
  261-3430 AB BUSHING (1.27-MM OS)  
3. 300-3565 [12] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
4. 263-4920 [6] SLEEVE-INJECTOR (INLET)  
6. 280-3979 [12] INSERT-VALVE SEAT (INLET)(STANDARD)  
  288-4881 AB INSERT-VALVE SEAT (INLET)(0.51-MM OS)  
  288-4882 AB INSERT-VALVE SEAT (0.76-MM OS, INLET)  
7. 166-2904 [12] SEAL-O-RING  
8. 3B-0623 [17] PLUG-CUP  
9. 3B-0645 [20] PLUG-CUP  
10. 8T-6757 [3] PLUG-PIPE  
11. 9X-7430 [6] SEAL-O-RING  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP32600085
 

183-5296: CYLINDER HEAD GP

183-5296 CYLINDER HEAD GP
PART OF 191-8423 CYLINDER HEAD GP
i01266813 SEBP3260
1835296 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your C-16 INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
1. 245-4324 Y [1] CYLINDER HEAD AS  
2. 490-7198 [12] VALVE-INLET  
3. 490-7200 [12] VALVE-EXHAUST  
4. 6I-0928 [24] WASHER-SPECIAL  
5. 186-2001 [24] ROTOCOIL AS  
6. 247-9908 [24] SPRING-VALVE (OUTER)  
7. 2A-4429 [48] LOCK-RETAINER  
8. 163-2478 [24] SEAL-VALVE STEM  
9. 211-3122 [24] SPRING-VALVE (INNER)  
   
    AVAILABLE REPAIR KIT(S):
  299-8342 [1] KIT-CYLINDER HEAD  
    (INCLUDES BRIDGE-VALVE & CYLINDER HEAD)
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP32600086
 

191-8423: CYLINDER HEAD GP

191-8423 CYLINDER HEAD GP
i01411833 SEBP3260
1918423 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your C-16 INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
1. 8T-6763 [1] PLUG-PIPE (1/4-18-THD)  
2. 224-5122 [1] GASKET (CYLINDER HEAD)  
3. 183-5296 Y [1] CYLINDER HEAD GP  
4. 194-8124 [6] SLEEVE AS (EXHAUST PORT)  
5. 124-1854 [10] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
  5H-1504 [10] WASHER-HARD (20X33.5X5-MM THK)  
6. 6V-5049 [4] SEAL-O-RING  
7. 124-1855 [16] BOLT-12 POINT HEAD (3/4-16X7.638-IN)  
  5H-1504 [16] WASHER-HARD (20X33.5X5-MM THK)  
8. 9S-8004 [3] PLUG (9/16-18-THD)  
9. 5P-0840 [1] SEAL-O-RING  
10. 8T-6765 [2] PLUG-PIPE (1/4-18-THD)  
11. 9S-4190 [1] PLUG-O-RING (7/8-14-THD)  
12. 6V-3251 [1] SEAL-O-RING  
13. 3E-6772 [24] SEAL (WATER)  
14. 9S-4191 [1] PLUG (9/16-18-THD)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP32600087
 

223-9250: CYLINDER HEAD GP

223-9250 CYLINDER HEAD GP
S/N BFM1000-2070
FOR 2300 RPM APLICATIONS FEILD REPLACEMENT 380-9100 CYLINDER HEAD IS AVALIBLE
PART OF 234-9185 CYLINDER HEAD GP
i01986632 SEBP3260
2239250 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your C-16 INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
1. 2A-4429 [48] LOCK-RETAINER  
2. 6I-0928 [24] WASHER-SPECIAL  
3. 153-7023 [12] VALVE-INLET  
4. 153-7024 [12] VALVE-EXHAUST  
5. 163-2478 [24] SEAL-VALVE STEM  
6. 211-3123 [24] SPRING-VALVE (OUTER)  
7. 243-6741 CY [1] CYLINDER HEAD AS  
8. 186-2001 [24] ROTOCOIL AS  
9. 211-3122 [24] SPRING-VALVE (INNER)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP32600088
 

223-9250: CYLINDER HEAD GP

223-9250 CYLINDER HEAD GP
S/N BFM2071-UP
FOR 2300 RPM APLICATIONS FEILD REPLACEMENT 380-9100 CYLINDER HEAD IS AVALIBLE
PART OF 234-9185 CYLINDER HEAD GP
i02462290 SEBP3260
2239250 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your C-16 INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
1. 2A-4429 [48] LOCK-RETAINER  
2. 6I-0928 [24] WASHER-SPECIAL  
3. 490-7198 [12] VALVE-INLET  
4. 490-7200 [12] VALVE-EXHAUST  
5. 163-2478 [24] SEAL-VALVE STEM  
6. 247-9908 [24] SPRING-VALVE (OUTER)  
7. 223-7263 CY [1] CYLINDER HEAD AS  
8. 186-2001 [24] ROTOCOIL AS  
9. 211-3122 [24] SPRING-VALVE (INNER)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP32600089
 

234-9185: CYLINDER HEAD GP

234-9185 CYLINDER HEAD GP
S/N BFM1000-2553
i01989414 SEBP3260
2349185 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your C-16 INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
1. 223-9250 Y [1] CYLINDER HEAD GP  
2. 224-5122 [1] GASKET (CYLINDER HEAD)  
3. 3E-6772 [24] SEAL (WATER)  
4. 6I-4025 [16] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  5H-1504 [1] WASHER-HARD (20X33.5X5-MM THK)  
  124-1855 [1] BOLT-12 POINT HEAD (3/4-16X7.638-IN)  
5. 194-8124 [6] SLEEVE AS (EXHAUST PORT)  
6. 106-5673 [10] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  5H-1504 [1] WASHER-HARD (20X33.5X5-MM THK)  
  124-1854 [1] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
7. 5P-0840 [1] SEAL-O-RING  
8. 183-3408 C [3] PLUG AS  
    (EACH INCLUDES)
8A. 214-7568 [1] SEAL-O-RING  
  9S-8004 [1] PLUG (9/16-18-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
A New Valve Bridge May Need to Be Installed on Certain Engines {1100}
2006/03/20
A New Outer Valve Spring is Now Used {1100, 1108}
2008/12/08
Cylinder Head And Spacer Plate Gasket Failures On Certain Engines {1100, 1201}
2015/05/15
Operation and Maintenance Manual
Engine Valve Rotators - Inspect
C-15 and C-16 Industrial Engines
Engine Valve Lash - Inspect/Adjust
C-15 and C-16 Industrial Engines
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125}
Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Technical Information Bulletin
Parts Stock Cylinder Head Assemblies with Rust Preventative Applied{1100}
Parts Stock Cylinder Head Assemblies with Rust Preventative Applied{1100}
Specifications
Cylinder Head
C-15 and C-16 Industrial Engines
Cylinder Head Valves
C-15 and C-16 Industrial Engines
Tool Operating Manual
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
C-15 and C-16 Industrial Engines
Disassembly and Assembly
Electronic Unit Injector Sleeve - Install
C-15 and C-16 Industrial Engines
Electronic Unit Injector Sleeve - Remove
C-15 and C-16 Industrial Engines
Camshaft Bearings - Remove
C-15 and C-16 Industrial Engines
Camshaft Bearings - Install
C-15 and C-16 Industrial Engines
Cylinder Head - Remove
C-15 and C-16 Industrial Engines
Cylinder Head - Install
C-15 and C-16 Industrial Engines
Inlet and Exhaust Valve Guides - Remove and Install
C-15 and C-16 Industrial Engines
Inlet and Exhaust Valves - Remove and Install
C-15 and C-16 Industrial Engines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
C-15 and C-16 Industrial Engines
Inlet and Exhaust Valve Seals - Remove and Install
C-15 and C-16 Industrial Engines
Inlet and Exhaust Valve Springs - Remove and Install
C-15 and C-16 Industrial Engines
Rocker Arm and Shaft - Remove
C-15 and C-16 Industrial Engines
Rocker Arm and Shaft - Install
C-15 and C-16 Industrial Engines

Caterpillar Parts SIS Catalog C-16 :

CYLINDER BLOCK GP
234-9702 CYLINDER BLOCK GP
CYLINDER BLOCK GP
234-9702 CYLINDER BLOCK GP
CYLINDER BLOCK GP
165-2462 CYLINDER BLOCK GP
CYLINDER BLOCK AS
357-1319 CYLINDER BLOCK AS
CYLINDER BLOCK AS
234-9709 CYLINDER BLOCK AS
CYLINDER BLOCK AS
155-0741 CYLINDER BLOCK AS
CRANKSHAFT GP
160-3913 CRANKSHAFT GP
CRANKSHAFT AS
187-8989 CRANKSHAFT AS
CYLINDER HEAD AS
243-0943 CYLINDER HEAD AS
CYLINDER HEAD AS
243-6741 CYLINDER HEAD AS
CYLINDER HEAD AS
245-4324 CYLINDER HEAD AS
CYLINDER HEAD AS
281-1640 CYLINDER HEAD AS
CYLINDER HEAD GP
183-5296 CYLINDER HEAD GP
CYLINDER HEAD GP
191-8423 CYLINDER HEAD GP
CYLINDER HEAD GP
223-9250 CYLINDER HEAD GP
CYLINDER HEAD GP
223-9250 CYLINDER HEAD GP

Truck sale: