AVSPARE.COM
parts catalog

C-15 Industrial Engine BEM00001-UP BASIC ENGINE Caterpillar SIS




Parts group C-15:

  For full view, you need register
BASIC ENGINE
ADAPTER GP-ENGINE TO XMSN
AIR COMPRESSOR GP
BELT TIGHTENER GP
ENGINE BRAKE GP
CAMSHAFT GP
CLUTCH GP
CRANKSHAFT GP
CYLINDER BLOCK GP
CYLINDER HEAD GP
DAMPER GP
DRIVE GP-ACCESSORY
DRIVE GP-FAN
DRIVE GP-PUMP
FLYWHEEL GP
GEAR GP
GUARD GP-BELT
HOUSING GP-FLYWHEEL
HOUSING GP-FRONT
LIFTING GP-ENGINE
MOUNTING GP-ALTERNATOR
MOUNTING GP-ENGINE
PAN GP-OIL
PARTS GP-MISCELLANEOUS
PISTON & ROD GP
POWER TAKE-OFF GP
PULLEY GP
SHAFT GP-STUB
SERPENTINE/V-BELTS
VALVE MECHANISM GP
ENGINE OVERHAUL KIT

Information:

(For parts list, see above)

BASIC ENGINE
AIR COMPRESSOR GP
Truck Engine News
Repair Guidelines for Air Compressors {1803}
2003/10/01
Engine News
Repair Guidelines for Air Compressors {1803}
2003/09/01
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/01
Reworked Air Compressors Now Have "R" on the Serial Number Plate {1803, 1804}
2009/04/13
An Air Compressor Support Bracket Is Available for Certain C15 and C18 Engines {1803}
2011/06/08
Operation and Maintenance Manual
Air Compressor - Inspect
C-15 and C-16 Industrial Engines
Air Compressor Filter - Clean/Replace
C-15 and C-16 Industrial Engines
Special Instruction
Retrofitting The Bendix Dura-Flo 596 Air Compressor to Existing Industrial Engines and Truck Engines{1803}
Retrofitting The Bendix Dura-Flo 596 Air Compressor to Existing Industrial Engines and Truck Engines{1803}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
Service Letter-Australia
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
Service Letter-CFEL
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
Service Letter-CSARL
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
Service Letter-Americas
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
Service Letter-Truck/Ag/Marine
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
Service Letter-Asia
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
Disassembly and Assembly
Air Compressor - Remove and Install
C-15 and C-16 Industrial Engines
BELT TIGHTENER GP
Operation and Maintenance Manual
Belt Tensioner - Inspect - If Equipped
C-15 and C-16 Industrial Engines
Specifications
Belt Tension Chart
C-15 and C-16 Industrial Engines
CAMSHAFT GP
Engine News
Procedure to Torque Camshaft Gear {1206, 1210}
2007/02/12
Improved Camshafts Are Now Used on Certain C15 and C18 Engines {1210}
2013/08/21
Special Instruction
Procedure to Torque the Camshaft Gear{1210, 1212}
Procedure to Torque the Camshaft Gear{1210, 1212}
Technical Information Bulletin
Thickness of the 102-5861 Thrust Plate Is Out of Specification on Certain 3400 Series Commercial and Machine Engines{1210}
Thickness of the 102-5861 Thrust Plate Is Out of Specification on Certain 3400 Series Commercial and Machine Engines{1210}
Specifications
Camshaft
C-15 and C-16 Industrial Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Information Release Memo
PRODUCT LINE ADDITIONS: REMANUFACTURED LONG BLOCKS FOR CERTAIN 3100, C-15 AND 3400 SERIES ENGINE APPLICATIONS
PRODUCT LINE ADDITIONS: REMANUFACTURED LONG BLOCKS FOR CERTAIN 3100, C-15 AND 3400 SERIES ENGINE APPLICATIONS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Excessive Bearing Wear - Inspect
C-15 and C-16 Industrial Engines
Disassembly and Assembly
Camshaft - Remove
C-15 and C-16 Industrial Engines
Camshaft - Install
C-15 and C-16 Industrial Engines
Camshaft Bearings - Remove
C-15 and C-16 Industrial Engines
Camshaft Bearings - Install
C-15 and C-16 Industrial Engines
Camshaft Gear - Remove and Install
C-15 and C-16 Industrial Engines
CLUTCH GP
Operation and Maintenance Manual
Power Take-Off Clutch - Check/Adjust/Lubricate
C-15 and C-16 Industrial Engines
Engaging the Driven Equipment
C-15 and C-16 Industrial Engines
COUPLING GP
CRANKSHAFT GP
Engine News
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2003/05/01
A New Type of Main Bearing is Now Used {1203}
2008/07/14
Inspection and/or Repair Procedure to Replace Crankshafts on Industrial Engines {1202}
2009/10/28
Procedure for Crankshafts that will not Rotate after Installation during a Rebuild {1202}
2008/09/15
A New Type of Main Bearing is Available {1202, 1203}
2008/09/29
Usability of Main Bearings and Camshaft Bearings {1202, 1203, 1218, 1219}
2008/11/24
Special Instruction
Inspection and/or Repair Procedure to Replace Broken Crankshafts in C-15, C-16, C15, 3406C, 3406E, and 3456 Engines{1202}
Inspection and/or Repair Procedure to Replace Broken Crankshafts in C-15, C-16, C15, 3406C, 3406E, and 3456 Engines{1202}
Technical Information Bulletin
NEW CRANKSHAFT SEALS FOR THE FRONT AND FOR THE REAR ARE NOW IN PRODUCTION BUT ARE NOT AVAILIBLE TO BE OREDERD AT THIS TIME
NEW CRANKSHAFT SEALS FOR THE FRONT AND FOR THE REAR ARE NOW IN PRODUCTION BUT ARE NOT AVAILIBLE TO BE OREDERD AT THIS TIME
Specifications
Connecting Rod Bearing Journal
C-15 and C-16 Industrial Engines
Main Bearing Journal
C-15 and C-16 Industrial Engines
Crankshaft
C-15 and C-16 Industrial Engines
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Excessive Bearing Wear - Inspect
C-15 and C-16 Industrial Engines
Main Bearings - Inspect
C-15 and C-16 Industrial Engines
Disassembly and Assembly
Crankshaft Front Seal - Install
C-15 and C-16 Industrial Engines
Crankshaft Main Bearings - Remove
C-15 and C-16 Industrial Engines
Crankshaft Front Seal - Remove
C-15 and C-16 Industrial Engines
Crankshaft - Remove
C-15 and C-16 Industrial Engines
Crankshaft Rear Seal - Remove
C-15 and C-16 Industrial Engines
Crankshaft Rear Seal - Install
C-15 and C-16 Industrial Engines
Crankshaft Main Bearings - Install
C-15 and C-16 Industrial Engines
Crankshaft - Install
C-15 and C-16 Industrial Engines
Service Magazine
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
CYLINDER BLOCK GP
Truck Engine News
The Cylinder Liners Have a New Appearance {1216}
2005/03/01
The Primer Color Has Changed for All C15 and C18 Truck Engine Blocks {1201, 7559}
2012/12/21
Engine News
The Cylinder Liners Have a New Appearance {1216}
2005/03/14
A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on Certain Engines {1124, 1201, 7555}
2010/03/02
The Primer Color Has Changed for All C15 and C18 Commercial Engine Blocks {1201, 7559}
2012/12/21
A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on C15 And C18 Engines {1100, 1124, 1201}
A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on C15 And C18 Engines {1100, 1124, 1201}
Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Technical Information Bulletin
Liner Flange Breakage
Liner Flange Breakage
Specifications
Cylinder Block
C-15 and C-16 Industrial Engines
Main Bearing Journal
C-15 and C-16 Industrial Engines
Cylinder Liner
C-15 and C-16 Industrial Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Information Release Memo
PRODUCT LINE ADDITIONS: REMANUFACTURED LONG BLOCKS FOR CERTAIN 3100, C-15 AND 3400 SERIES ENGINE APPLICATIONS
PRODUCT LINE ADDITIONS: REMANUFACTURED LONG BLOCKS FOR CERTAIN 3100, C-15 AND 3400 SERIES ENGINE APPLICATIONS
Testing and Adjusting
Cylinder Block - Inspect
C-15 and C-16 Industrial Engines
Excessive Bearing Wear - Inspect
C-15 and C-16 Industrial Engines
Main Bearings - Inspect
C-15 and C-16 Industrial Engines
Cylinder Liner Projection - Inspect
C-15 and C-16 Industrial Engines
Disassembly and Assembly
Crankshaft Main Bearings - Remove
C-15 and C-16 Industrial Engines
Cylinder Liner - Remove
C-15 and C-16 Industrial Engines
Piston Cooling Jets - Remove and Install
C-15 and C-16 Industrial Engines
Camshaft Bearings - Remove
C-15 and C-16 Industrial Engines
Camshaft Bearings - Install
C-15 and C-16 Industrial Engines
Cylinder Liner - Install
C-15 and C-16 Industrial Engines
Crankshaft Main Bearings - Install
C-15 and C-16 Industrial Engines
Service Magazine
The Primer Color Has Changed for All C15 and C18 Machine Engine Blocks {1201, 7559}
2012/12/21
CYLINDER HEAD GP
Engine News
Two Adjustment Gauges Help the Technician Set the Lash for the Variable Valve Actuators {0703, 0763, 1100, 1209}
2006/02/13
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
A New Valve Bridge May Need to Be Installed on Certain Engines {1100}
2006/03/20
A New Outer Valve Spring is Now Used {1100, 1108}
2008/11/17
A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on C15 And C18 Engines {1100, 1124, 1201}
A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on C15 And C18 Engines {1100, 1124, 1201}
Operation and Maintenance Manual
Engine Valve Rotators - Inspect
C-15 and C-16 Industrial Engines
Engine Valve Lash - Inspect/Adjust
C-15 and C-16 Industrial Engines
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125}
Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Technical Information Bulletin
Parts Stock Cylinder Head Assemblies with Rust Preventative Applied{1100}
Parts Stock Cylinder Head Assemblies with Rust Preventative Applied{1100}
Specifications
Cylinder Head
C-15 and C-16 Industrial Engines
Cylinder Head Valves
C-15 and C-16 Industrial Engines
Tool Operating Manual
370-8083 Plate Assembly - Lifting{0700, 0701, 0703, 1000, 1100}
370-8083 Plate Assembly - Lifting{0700, 0701, 0703, 1000, 1100}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
CATERPILLAR REMAN CYLINDER HEAD KITS FOR 3406E AND C-15 APPLICATIONS
CATERPILLAR REMAN CYLINDER HEAD KITS FOR 3406E AND C-15 APPLICATIONS
PRODUCT LINE ADDITIONS: REMANUFACTURED LONG BLOCKS FOR CERTAIN 3100, C-15 AND 3400 SERIES ENGINE APPLICATIONS
PRODUCT LINE ADDITIONS: REMANUFACTURED LONG BLOCKS FOR CERTAIN 3100, C-15 AND 3400 SERIES ENGINE APPLICATIONS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
C-15 and C-16 Industrial Engines
Disassembly and Assembly
Electronic Unit Injector Sleeve - Install
C-15 and C-16 Industrial Engines
Electronic Unit Injector Sleeve - Remove
C-15 and C-16 Industrial Engines
Camshaft Bearings - Remove
C-15 and C-16 Industrial Engines
Camshaft Bearings - Install
C-15 and C-16 Industrial Engines
Cylinder Head - Remove
C-15 and C-16 Industrial Engines
Cylinder Head - Install
C-15 and C-16 Industrial Engines
Inlet and Exhaust Valve Guides - Remove and Install
C-15 and C-16 Industrial Engines
Inlet and Exhaust Valves - Remove and Install
C-15 and C-16 Industrial Engines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
C-15 and C-16 Industrial Engines
Inlet and Exhaust Valve Seals - Remove and Install
C-15 and C-16 Industrial Engines
Inlet and Exhaust Valve Springs - Remove and Install
C-15 and C-16 Industrial Engines
Rocker Arm and Shaft - Remove
C-15 and C-16 Industrial Engines
Rocker Arm and Shaft - Install
C-15 and C-16 Industrial Engines
DAMPER GP
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
C-15 and C-16 Industrial Engines
Specifications
Vibration Damper
C-15 and C-16 Industrial Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Vibration Damper - Check
C-15 and C-16 Industrial Engines
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
C-15 and C-16 Industrial Engines
DRIVE GP-ACCESSORY
Engine News
A New Drive Bearing Is Now Used on Certain 3406E, C11, C13, C15, C16, and C18 Engines {1207}
A New Drive Bearing Is Now Used on Certain 3406E, C11, C13, C15, C16, and C18 Engines {1207}
DRIVE GP-FAN
New Lubricant for the Fan Drive {0645, 1359}
2004/08/01
Operation and Maintenance Manual
Fan Drive Bearing - Lubricate
C-15 and C-16 Industrial Engines
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE FAN DRIVE GP ON CERTAIN C-15 INDUSTRIAL ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE FAN DRIVE GP ON CERTAIN C-15 INDUSTRIAL ENGINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Specifications
Fan Drive
C-15 and C-16 Industrial Engines
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE FAN DRIVE GP ON CERTAIN C-15 INDUSTRIAL ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE FAN DRIVE GP ON CERTAIN C-15 INDUSTRIAL ENGINES
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fan Drive - Disassemble
C-15 and C-16 Industrial Engines
Fan Drive - Assemble
C-15 and C-16 Industrial Engines
Fan Drive - Remove
C-15 and C-16 Industrial Engines
Fan Drive - Install
C-15 and C-16 Industrial Engines
Service Magazine
New Lubricant for the Fan Drive {0645, 1359}
2005/03/21
ENGINE GP
Engine News
Proper Storage Procedures Are Available For Commercial Engines {1000}
Proper Storage Procedures Are Available For Commercial Engines {1000}
Special Instruction
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Service Magazine
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
FASTENER GP-ENGINE
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
FLYWHEEL GP
Engine News
Procedure to Use the Correct Mounting Bolts with the 10R-2356 Flywheel As {1156}
2007/12/24
Specifications
Flywheel
C-15 and C-16 Industrial Engines
Flywheel Housing
C-15 and C-16 Industrial Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Testing and Adjusting
Flywheel - Inspect
C-15 and C-16 Industrial Engines
Disassembly and Assembly
Flywheel - Remove
C-15 and C-16 Industrial Engines
Flywheel - Install
C-15 and C-16 Industrial Engines
GEAR GP
Engine News
Procedure to Torque Camshaft Gear {1206, 1210}
2007/02/12
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/21
Special Instruction
Procedure to Torque the Camshaft Gear{1210, 1212}
Procedure to Torque the Camshaft Gear{1210, 1212}
Technical Information Bulletin
Thickness of the 102-5861 Thrust Plate Is Out of Specification on Certain 3400 Series Commercial and Machine Engines{1210}
Thickness of the 102-5861 Thrust Plate Is Out of Specification on Certain 3400 Series Commercial and Machine Engines{1210}
Specifications
Gear Group (Rear)
C-15 and C-16 Industrial Engines
Gear Group (Front)
C-15 and C-16 Industrial Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Testing and Adjusting
Gear Group (Front) - Time
C-15 and C-16 Industrial Engines
Disassembly and Assembly
Gear Group (Front) - Remove
C-15 and C-16 Industrial Engines
Gear Group (Front) - Install
C-15 and C-16 Industrial Engines
HOUSING GP-FLYWHEEL
Specifications
Flywheel Housing
C-15 and C-16 Industrial Engines
Testing and Adjusting
Flywheel Housing - Inspect
C-15 and C-16 Industrial Engines
Disassembly and Assembly
Flywheel Housing - Remove and Install
C-15 and C-16 Industrial Engines
HOUSING GP-FRONT
Engine News
New Screws Are Now Used on the Front Housing Cover {1151, 1166, 7553}
2008/03/24
Technical Information Bulletin
REPLACEMENT LOCKNUTS FOR THE; C15, C-15, C-16, C18, C-18, AND 3406E FRONT COVER
REPLACEMENT LOCKNUTS FOR THE; C15, C-15, C-16, C18, C-18, AND 3406E FRONT COVER
Specifications
Housing (Front)
C-15 and C-16 Industrial Engines
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Disassembly and Assembly
Front Cover - Remove
C-15 and C-16 Industrial Engines
Front Cover - Install
C-15 and C-16 Industrial Engines
Housing (Front) - Remove
C-15 and C-16 Industrial Engines
Housing (Front) - Install
C-15 and C-16 Industrial Engines
LIFTING GP-ENGINE
Tool Operating Manual
370-8083 Plate Assembly - Lifting{0700, 0701, 0703, 1000, 1100}
370-8083 Plate Assembly - Lifting{0700, 0701, 0703, 1000, 1100}
MISCELLANEOUS INFORMATION
Operation and Maintenance Manual
Overhaul Considerations
C-15 and C-16 Industrial Engines
MOUNTING GP-ALTERNATOR
Engine News
A New Alternator Support Assembly Is Now Available for Industrial Engines {1154, 1405}
2009/04/13
Improved Alternator Mounting Groups Are Now Used on Certain C15 and C18 Engines {1154, 1405}
2014/03/07
Special Instruction
Installation of the New Alternator Support Assembly on Industrial Engines{1154, 1405}
Installation of the New Alternator Support Assembly on Industrial Engines{1154, 1405}
Procedure to Replace the Current Alternator Mounting Groups with Improved Alternator Mounting Groups on Certain C15 and C18 Engines{1154, 1405}
Procedure to Replace the Current Alternator Mounting Groups with Improved Alternator Mounting Groups on Certain C15 and C18 Engines{1154, 1405}
Improved Alternator Mounting Groups Are Used for Certain C15 and C18 Industrial and Petroleum Engines {1154, 1405}
Improved Alternator Mounting Groups Are Used for Certain C15 and C18 Industrial and Petroleum Engines {1154, 1405}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR BRACKET ON CERTAIN C15, C16, AND C18 COMMERCIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR BRACKET ON CERTAIN C15, C16, AND C18 COMMERCIAL ENGINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Service Letter-APD
MOUNTING GP-ENGINE
Operation and Maintenance Manual
Engine Mounts - Inspect
C-15 and C-16 Industrial Engines
Specifications
Engine Support (Front)
C-15 and C-16 Industrial Engines
Engine Support (Rear)
C-15 and C-16 Industrial Engines
PAN GP-OIL
Engine News
A New Oil Pan Gasket Is Available for Certain C15 and C18 Tier 3 Engines {1302, 7555}
2011/04/08
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR RETORQUING THE OIL PAN BOLTS ON CERTAIN C-15, C-16, AND C-18 TRUCK AND INDUSTRIAL ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR RETORQUING THE OIL PAN BOLTS ON CERTAIN C-15, C-16, AND C-18 TRUCK AND INDUSTRIAL ENGINES
Service Letter-CSARL
Service Letter-Truck/Ag/Marine
Specifications
Engine Oil Pan
C-15 and C-16 Industrial Engines
Disassembly and Assembly
Engine Oil Pan - Remove and Install
C-15 and C-16 Industrial Engines
Service Magazine
A New Oil Pan Gasket Is Available for Certain C15 and C18 Tier 3 Machine Engines {1302, 7555}
2011/04/08
PISTON & ROD GP
Engine News
A New Piston and Piston Rings Are Now Available {1214, 1215}
2001/08/01
New Piston and Rod Group that Improves Cold Weather Operation {1225}
2003/04/01
New Guidelines for Inspecting Pistons {1214}
2006/01/02
Usability of Main Bearings and Camshaft Bearings {1202, 1203, 1218, 1219}
2008/11/24
Special Instruction
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Connecting Rod Bearings
Connecting Rod Bearings
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Specifications
Connecting Rod
C-15 and C-16 Industrial Engines
Connecting Rod Bearing Journal
C-15 and C-16 Industrial Engines
Piston and Rings
C-15 and C-16 Industrial Engines
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Information Release Memo
PRODUCT LINE ADDITIONS: REMANUFACTURED LONG BLOCKS FOR CERTAIN 3100, C-15 AND 3400 SERIES ENGINE APPLICATIONS
PRODUCT LINE ADDITIONS: REMANUFACTURED LONG BLOCKS FOR CERTAIN 3100, C-15 AND 3400 SERIES ENGINE APPLICATIONS
Testing and Adjusting
Engine Crankcase Pressure (Blowby) - Test
C-15 and C-16 Industrial Engines
Excessive Bearing Wear - Inspect
C-15 and C-16 Industrial Engines
Connecting Rod Bearings - Inspect
C-15 and C-16 Industrial Engines
Cylinder Liner Projection - Inspect
C-15 and C-16 Industrial Engines
Piston Ring Groove - Inspect
C-15 and C-16 Industrial Engines
Disassembly and Assembly
Pistons and Connecting Rods - Assemble
C-15 and C-16 Industrial Engines
Pistons and Connecting Rods - Disassemble
C-15 and C-16 Industrial Engines
Piston Cooling Jets - Remove and Install
C-15 and C-16 Industrial Engines
Pistons and Connecting Rods - Remove
C-15 and C-16 Industrial Engines
Pistons and Connecting Rods - Install
C-15 and C-16 Industrial Engines
Connecting Rod Bearings - Remove
C-15 and C-16 Industrial Engines
Connecting Rod Bearings - Install
C-15 and C-16 Industrial Engines
POWER TAKE-OFF GP
Operation and Maintenance Manual
Power Take-Off Clutch - Check/Adjust/Lubricate
C-15 and C-16 Industrial Engines
Engaging the Driven Equipment
C-15 and C-16 Industrial Engines
Systems Operation
Rear Power Take-Off (RPTO)
C-15 and C-16 Industrial Engines
PULLEY GP
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
C-15 and C-16 Industrial Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
C-15 and C-16 Industrial Engines
PUMP GP-GEAR
Engine News
Different Housings are Used on 3400 Remanufactured Engines {1304}
Different Housings are Used on 3400 Remanufactured Engines {1304}
TOOLS
Two Adjustment Gauges Help the Technician Set the Lash for the Variable Valve Actuators {0703, 0763, 1100, 1209}
2006/02/13
Special Instruction
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
370-8083 Plate Assembly - Lifting{0700, 0701, 0703, 1000, 1100}
370-8083 Plate Assembly - Lifting{0700, 0701, 0703, 1000, 1100}
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
SERPENTINE/V-BELTS
Operation and Maintenance Manual
Belt Tensioner - Inspect - If Equipped
C-15 and C-16 Industrial Engines
Belt - Inspect
C-15 and C-16 Industrial Engines
Specifications
Belt Tension Chart
C-15 and C-16 Industrial Engines
VALVE MECHANISM GP
Engine News
A New Valve Cover and New Valve Cover Fasteners are Available {1107}
2004/04/01
Two Adjustment Gauges Help the Technician Set the Lash for the Variable Valve Actuators {0703, 0763, 1100, 1209}
2006/02/13
Valve Bridges are Included with Cylinder Heads {1102, 1123}
2010/08/23
A New Rocker Arm Assembly is Available {1123}
2008/08/25
A New Rocker Arm Assembly Is Available {1123}
2009/02/09
A New Screw Is Available for the Rocker Arm Assemblies of Some Commercial Engines {1123}
2010/03/12
A New Rocker Arm Assembly Is Available for C15 Engines {1123}
2010/03/29
A New Valve Bridge Is Available for Certain Commercial Engines {1121}
2011/01/06
A New Valve Bridge Is Available for Certain Commercial Engines {1102, 1123}
2011/01/10
Valve Cover Isolation Seals Are Now Used on Certain Engines {1107, 7555}
2011/11/08
An Improved Valve Cover Seal Is Used on Certain Commercial Engines {1107, 7553, 7555}
2014/07/25
Updated Torque Requirements for Reman Rocker Arm Adjusting Screw Lock Nuts on Certain C15, C16, C18, C27, and C32 Engines {1123}
2015/03/25
Improved Wiring Harnesses Are Now Used on Certain Engines {1120, 1408, 1900}
Improved Wiring Harnesses Are Now Used on Certain Engines {1120, 1408, 1900}
Cat<SUP>&reg;</SUP> Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123}
Operation and Maintenance Manual
Engine Valve Rotators - Inspect
C-15 and C-16 Industrial Engines
Engine Valve Lash - Inspect/Adjust
C-15 and C-16 Industrial Engines
Special Instruction
Valve Bridges are Included with Cylinder Heads{1102, 1123}
Valve Bridges are Included with Cylinder Heads{1102, 1123}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR RESETTING THE VALVE LASH ON CERTAIN C-15 AND C-16 ENGINES IN COMMERCIAL AND ON-HIGHWAY TRUCK APPLICATIONS, AND IN CERTAIN 3406E COMMERCIAL APPLICATIONS
PRODUCT SUPPORT PROGRAM FOR RESETTING THE VALVE LASH ON CERTAIN C-15 AND C-16 ENGINES IN COMMERCIAL AND ON-HIGHWAY TRUCK APPLICATIONS, AND IN CERTAIN 3406E COMMERCIAL APPLICATIONS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Specifications
Valve Mechanism
C-15 and C-16 Industrial Engines
Electronic Unit Injector Rocker Arm
C-15 and C-16 Industrial Engines
Rocker Shaft
C-15 and C-16 Industrial Engines
Valve Mechanism Cover
C-15 and C-16 Industrial Engines
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR RESETTING THE VALVE LASH ON CERTAIN C-15 AND C-16 ENGINES IN COMMERCIAL AND ON-HIGHWAY TRUCK APPLICATIONS, AND IN CERTAIN 3406E COMMERCIAL APPLICATIONS
PRODUCT SUPPORT PROGRAM FOR RESETTING THE VALVE LASH ON CERTAIN C-15 AND C-16 ENGINES IN COMMERCIAL AND ON-HIGHWAY TRUCK APPLICATIONS, AND IN CERTAIN 3406E COMMERCIAL APPLICATIONS
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
REMANUFACTURED EXHAUST ROCKER ARM ASSEMBLIES FOR CERTAIN C15 ENGINE APPLICATIONS
REMANUFACTURED EXHAUST ROCKER ARM ASSEMBLIES FOR CERTAIN C15 ENGINE APPLICATIONS
REMANUFACTURED UNIT INJECTOR ROCKER ARM ASSEMBLIES FOR CERTAIN C15 ENGINE APPLICATIONS
REMANUFACTURED UNIT INJECTOR ROCKER ARM ASSEMBLIES FOR CERTAIN C15 ENGINE APPLICATIONS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR RESETTING THE VALVE LASH ON CERTAIN C-15 AND C-16 ENGINES IN COMMERCIAL AND ON-HIGHWAY TRUCK APPLICATIONS, AND IN CERTAIN 3406E COMMERCIAL APPLICATIONS
PRODUCT SUPPORT PROGRAM FOR RESETTING THE VALVE LASH ON CERTAIN C-15 AND C-16 ENGINES IN COMMERCIAL AND ON-HIGHWAY TRUCK APPLICATIONS, AND IN CERTAIN 3406E COMMERCIAL APPLICATIONS
Testing and Adjusting
Finding Top Center Position for No. 1 Piston
C-15 and C-16 Industrial Engines
Engine Valve Lash - Inspect/Adjust
C-15 and C-16 Industrial Engines
Disassembly and Assembly
Valve Mechanism Cover - Remove and Install
C-15 and C-16 Industrial Engines
Valve Mechanism Cover Base - Remove and Install
C-15 and C-16 Industrial Engines
Rocker Arm - Disassemble
C-15 and C-16 Industrial Engines
Rocker Arm - Assemble
C-15 and C-16 Industrial Engines
Rocker Arm and Shaft - Remove
C-15 and C-16 Industrial Engines
Rocker Arm and Shaft - Install
C-15 and C-16 Industrial Engines
Service Magazine
Cat<SUP>&reg;</SUP> Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123}
COVER GP-ENGINE
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
ENGINE OVERHAUL KIT
Engine News
A New Improved Seal Is Now Used in the Reman Water Pumps of Certain Engines {1000, 1361, 7555}
2012/05/09

Truck sale:

96,000 USD 
Caterpillar C15, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
65,000 
Caterpillar C15, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
28,700 
Caterpillar C15, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
Kuwait
29,650 
Caterpillar C15, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
Kuwait
38,300 
Caterpillar C15, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
Kuwait
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. CatĀ® and CaterpillarĀ® are registered trademarks of Caterpillar, Inc.