ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGINGBATTERY GP
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING#SEBP32610620
4N-3986: ALTERNATOR GP-CHARGING
4N-3986 ALTERNATOR GP-CHARGING
S/N BEM1-7160
24-VOLT, 60-AMPERE
FIELD REPLACEMENT ORDER @@@@@333-1184@@@@@, @@@@@266-7227@@@@@, 1- 3T-4688 TERMINAL-RING
AN ATTACHMENT
S/N BEM1-7160
24-VOLT, 60-AMPERE
FIELD REPLACEMENT ORDER @@@@@333-1184@@@@@, @@@@@266-7227@@@@@, 1- 3T-4688 TERMINAL-RING
AN ATTACHMENT
Parts for your C-15 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6N-1876 | [1] | HOUSING AS (RECTIFIER) | |
| 2. | 9S-2396 | [1] | BUSHING-TERMINAL | |
| 3. | 9N-0943 | [1] | PLUG-BEARING WELL | |
| 4. | 5P-3418 | [1] | BEARING-ROLLER | |
| 5. | 6N-1968 | [1] | STATOR AS | |
| 2L-8075 | [3] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 9N-0939 | [1] | GROMMET | ||
| 6. | 9N-0942 | [1] | PLATE-COVER | |
| 7. | 2P-5616 | [1] | FRAME-DRIVE END | |
| 8. | 9S-2390 | [1] | RETAINER | |
| 9. | 9N-0937 | [1] | RECTIFIER AS | |
| 10. | 9S-2302 | [1] | ROTOR AS | |
| 11. | 5P-7807 | [1] | BALL BEARING | |
| 12. | 100-6531 | [1] | FAN-ALTERNATOR (11-BLADE) | |
| 13. | 5P-3419 | [1] | RACE-BEARING INNER | |
| 14. | 7F-7621 | [1] | WASHER (0.635X1.25X0.09-IN THK) | |
| 15. | 2K-4821 | [1] | LOCKNUT (5/8-18-THD) | |
| 16. | 6N-1945 | [1] | COIL AS-FIELD | |
| 17. | 9X-2500 | [4] | SCREW-HEX FLANGE (10-24X38.1-MM) | |
| 18. | 9N-3388 | [5] | BOLT (10-24X0.75-IN) | |
| 19. | 100-6532 | [1] | COLLAR-ALTERNATOR | |
| 20. | 9S-2009 | [4] | BOLT-FLANGE HEAD (10-24X3.625-IN) | |
| 21. | 6N-1944 | [1] | DIODE AS | |
| 22. | 6N-1870 | [2] | SCREW AS (8-32X34-MM) | |
| 23. | 8T-0328 | [2] | WASHER-HARD (5.5X10X1-MM THK) | |
| 24. | 9S-2544 | [7] | SCREW-HEX HEAD (8-32X11.13-MM) | |
| 25. | 9B-7233 | [11] | LOCKWASHER | |
| 26. | 4B-2043 | [4] | NUT (8-32-THD) | |
| 27. | 6V-8187 | [2] | NUT (1/4-28-THD) | |
| 28. | 1H-3244 | [2] | LOCKWASHER | |
| 29. | 6N-1925 | [1] | BRACKET | |
| 30. | 6N-1946 | [1] | CAPACITOR AS | |
| 31. | 6N-1872 | [3] | SCREW AS (8-32X1.25-IN) | |
| 32. | 3T-6354 | [1] | REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR) | |
| 33. | 6N-1873 | [1] | LEAD AS | |
| 34. | 2L-8075 | [3] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | |
| 35. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 36. | 6N-1871 | [1] | LEAD AS | |
| 37. | 8M-6701 | [3] | WASHER (0.281X0.5X0.032-IN THK) | |
| 38. | 6N-1856 | [4] | BUSHING-TERMINAL | |
| AVAILABLE REPAIR KIT(S): | ||||
| 6N-1875 | [1] | KIT-OUTPUT TERMINAL (ALTERNATOR) | ||
| (INCLUDES TERMINAL, LEAD ASSEMBLY, BUSHING, WASHERS, NUTS & LOCKWASHERS) | ||||
| 105-3762 | [1] | KIT-ALTERNATOR TERMINAL | ||
| (INCLUDES TERMINAL ASSEMBLY, INSULATOR, BUSHING, WASHER, NUTS & LOCKWASHERS) | ||||
#SEBP32610621
4N-3986: ALTERNATOR GP-CHARGING
4N-3986 ALTERNATOR GP-CHARGING
S/N BEM7161-UP
24-VOLT, 60-AMPERE
FIELD REPLACEMENT ORDER @@@@@333-1184@@@@@, @@@@@266-7227@@@@@, 1- 3T-4688 TERMINAL-RING
AN ATTACHMENT
S/N BEM7161-UP
24-VOLT, 60-AMPERE
FIELD REPLACEMENT ORDER @@@@@333-1184@@@@@, @@@@@266-7227@@@@@, 1- 3T-4688 TERMINAL-RING
AN ATTACHMENT
Parts for your C-15 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6N-1876 | [1] | HOUSING AS (RECTIFIER) | |
| 2. | 9S-2396 | [1] | BUSHING-TERMINAL | |
| 3. | 9N-0943 | [1] | PLUG-BEARING WELL | |
| 4. | 5P-3418 | [1] | BEARING-ROLLER | |
| 5. | 6N-1968 | [1] | STATOR AS | |
| 2L-8075 | [3] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 9N-0939 | [1] | GROMMET | ||
| 6. | 9N-0942 | [1] | PLATE-COVER | |
| 7. | 2P-5616 | [1] | FRAME-DRIVE END | |
| 8. | 9S-2390 | [1] | RETAINER | |
| 9. | 9N-0937 | [1] | RECTIFIER AS | |
| 10. | 9S-2302 | [1] | ROTOR AS | |
| 11. | 5P-7807 | [1] | BALL BEARING | |
| 12. | 100-6531 | [1] | FAN-ALTERNATOR (11-BLADE) | |
| 13. | 5P-3419 | [1] | RACE-BEARING INNER | |
| 15. | 2K-4821 | [1] | LOCKNUT (5/8-18-THD) | |
| 16. | 6N-1945 | [1] | COIL AS-FIELD | |
| 17. | 9X-2500 | [4] | SCREW-HEX FLANGE (10-24X38.1-MM) | |
| 18. | 9N-3388 | [5] | BOLT (10-24X0.75-IN) | |
| 19. | 100-6532 | [1] | COLLAR-ALTERNATOR | |
| 20. | 9S-2009 | [4] | BOLT-FLANGE HEAD (10-24X3.625-IN) | |
| 21. | 6N-1944 | [1] | DIODE AS | |
| 22. | 6N-1870 | [2] | SCREW AS (8-32X34-MM) | |
| 23. | 8T-0328 | [2] | WASHER-HARD (5.5X10X1-MM THK) | |
| 24. | 9S-2544 | [7] | SCREW-HEX HEAD (8-32X11.13-MM) | |
| 25. | 9B-7233 | [11] | LOCKWASHER | |
| 26. | 4B-2043 | [4] | NUT (8-32-THD) | |
| 27. | 6V-8187 | [2] | NUT (1/4-28-THD) | |
| 28. | 1H-3244 | [2] | LOCKWASHER | |
| 29. | 6N-1925 | [1] | BRACKET | |
| 30. | 6N-1946 | [1] | CAPACITOR AS | |
| 31. | 6N-1872 | [3] | SCREW AS (8-32X1.25-IN) | |
| 32. | 3T-6354 | [1] | REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR AIR) | |
| 33. | 6N-1873 | [1] | LEAD AS | |
| 34. | 2L-8075 | [3] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | |
| 35. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 36. | 6N-1871 | [1] | LEAD AS | |
| 37. | 8M-6701 | [3] | WASHER (0.281X0.5X0.032-IN THK) | |
| 38. | 6N-1856 | [4] | BUSHING-TERMINAL | |
| AVAILABLE REPAIR KIT(S): | ||||
| 6N-1875 | [1] | KIT-OUTPUT TERMINAL (ALTERNATOR) | ||
| (INCLUDES TERMINAL, LEAD ASSEMBLY, BUSHING, WASHERS, NUTS & LOCKWASHERS) | ||||
| 105-3762 | [1] | KIT-ALTERNATOR TERMINAL | ||
| (INCLUDES TERMINAL ASSEMBLY, INSULATOR, BUSHING, WASHER, NUTS & LOCKWASHERS) | ||||
#SEBP32610622
5N-5692: ALTERNATOR GP-CHARGING
Parts for your C-15 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-6920 | [1] | BEARING-ROLLER | |
| 2. | 7N-7806 | [1] | COIL AS-FIELD | |
| 3. | 9G-5578 | [1] | STATOR AS (24-VOLT) | |
| 4. | 7N-7795 | [1] | COLLAR | |
| 5. | 7N-7810 | [1] | FRAME AS-DRIVE END | |
| 6. | 6V-2202 | [1] | BALL BEARING | |
| 7. | 9L-2140 | [1] | PLATE | |
| 8. | 7X-3353 | [4] | SCREW-HEX HEAD (10X24X19.05-MM) | |
| 9. | 7N-7800 | [1] | ROTOR AS | |
| 10. | 187-2034 | [1] | NUT-FLANGE (5/8-18-THD) | |
| 12. | 030-9612 | [5] | SCREW-FORMING (10-24X0.5-IN) | |
| 13. | 9L-2139 | [1] | WASHER-FELT (1.31X1.68X0.125-IN THK) | |
| 14. | 3E-5454 | [1] | FAN-ALTERNATOR (11-BLADE) | |
| 15. | 9S-2437 | [3] | SCREW-TAPPING (10-24X19.05-MM) | |
| 16. | 9L-2137 | [1] | RETAINER AS | |
| 17. | 8F-1434 | [4] | LOCKWASHER | |
| 18. | 7N-9024 | [4] | BOLT (10-24X2.5-IN) | |
| 19. | 7N-7805 | [1] | HOUSING | |
| 20. | 7N-7809 | [1] | PLATE | |
| 21. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 22. | 9B-7233 | [6] | LOCKWASHER | |
| 23. | 9L-6770 | [1] | CAP-DUST | |
| 25. | 6N-1872 | [2] | SCREW AS (8-32X1.25-IN) | |
| 26. | 7N-9023 | [2] | SCREW AS (8-32X26.9-MM) | |
| 27. | 3T-6354 | [1] | REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR AIR) | |
| 28. | 6V-8377 | [4] | NUT (8-32-THD) | |
| 29. | 7N-7811 | [1] | CONNECTOR | |
| 30. | 8T-0328 | [6] | WASHER-HARD (5.5X10X1-MM THK) | |
| 31. | 112-9119 | [1] | DIODE AS-ALTERNATOR | |
| 32. | 7N-9021 | [1] | SCREW AS (8-32X1.34-IN) | |
| 33. | 7N-7796 | [1] | BUSHING-TERMINAL | |
| 34. | 7N-7802 | [1] | CAPACITOR AS | |
| 35. | 7N-7798 | [1] | CONNECTOR | |
| 36. | 7N-7801 | [1] | CONNECTOR | |
| 37. | 9S-2544 | [2] | SCREW-HEX HEAD (8-32X11.13-MM) | |
| 38. | 1H-3244 | [1] | LOCKWASHER | |
| 39. | 6V-8187 | [1] | NUT (1/4-28-THD) | |
| 40. | 206-4202 | [1] | RECTIFIER AS | |
| AVAILABLE REPAIR KIT(S): | ||||
| 7N-7807 | [1] | KIT-OUTPUT TERMINAL (ALTERNATOR) | ||
| (INCLUDES INSULATOR, SCREWS, WASHERS, LOCKWASHERS, NUTS & ADAPTERS) | ||||
| 7N-7808 | [1] | KIT-RELAY TERMINAL (ALTERNATOR) | ||
| (INCLUDES STUDS, BUSHINGS, WASHERS & NUT AS) | ||||
#SEBP32610623
5N-5692: ALTERNATOR GP-CHARGING
Parts for your C-15 INDUSTRIAL ENGINE:
CATERPILLAR SIS#SEBP32610624
8C-6163: ALTERNATOR GP-CHARGING
8C-6163 ALTERNATOR GP-CHARGING
12-VOLT, 105-AMPERE
REPLACED BY @@@@@266-7224@@@@@
AN ATTACHMENT
12-VOLT, 105-AMPERE
REPLACED BY @@@@@266-7224@@@@@
AN ATTACHMENT
Parts for your C-15 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6N-1876 | [1] | HOUSING AS (RECTIFIER) | |
| 2. | 9S-2396 | [1] | BUSHING-TERMINAL | |
| 3. | 9N-0943 | [1] | PLUG-BEARING WELL | |
| 4. | 5P-3418 | [1] | BEARING-ROLLER | |
| 5. | 8T-9762 | [1] | STATOR AS | |
| 6. | 9N-0942 | [1] | PLATE-COVER | |
| 7. | 2P-5616 | [1] | FRAME-DRIVE END | |
| 8. | 9S-2390 | [1] | RETAINER | |
| 9. | 9N-0937 | [1] | RECTIFIER AS | |
| 10. | 9S-2302 | [1] | ROTOR AS | |
| 11. | 5P-7807 | [1] | BALL BEARING | |
| 12. | 9W-4065 | [1] | COIL AS-FIELD | |
| 13. | 5P-3419 | [1] | RACE-BEARING INNER | |
| 14. | 7F-7621 | [1] | WASHER (0.635X1.25X0.09-IN THK) | |
| 15. | 2K-4821 | [1] | LOCKNUT (5/8-18-THD) | |
| 16. | 9N-3388 | [5] | BOLT (10-24X0.75-IN) | |
| 17. | 9S-2009 | [4] | BOLT-FLANGE HEAD (10-24X3.625-IN) | |
| 18. | 100-6531 | [1] | FAN-ALTERNATOR (11-BLADE) | |
| 19. | 100-6532 | [1] | COLLAR-ALTERNATOR | |
| 20. | 9X-2500 | [4] | SCREW-HEX FLANGE (10-24X38.1-MM) | |
| 21. | 6N-1944 | [1] | DIODE AS | |
| 22. | 6N-1870 | [2] | SCREW AS (8-32X34-MM) | |
| 8M-6701 | [3] | WASHER (0.281X0.5X0.032-IN THK) | ||
| 6N-1856 | [4] | BUSHING-TERMINAL | ||
| 23. | 8T-0328 | [2] | WASHER-HARD (5.5X10X1-MM THK) | |
| 24. | 9S-2544 | [3] | SCREW-HEX HEAD (8-32X11.13-MM) | |
| 9B-7233 | [7] | LOCKWASHER | ||
| 25. | 6N-1871 | [1] | LEAD AS | |
| 26. | 4B-2043 | [4] | NUT (8-32-THD) | |
| 27. | 6V-8187 | [2] | NUT (1/4-28-THD) | |
| 28. | 1H-3244 | [2] | LOCKWASHER | |
| 29. | 6N-1925 | [1] | BRACKET | |
| 30. | 6N-1946 | [1] | CAPACITOR AS | |
| 31. | 6N-1872 | [3] | SCREW AS (8-32X1.25-IN) | |
| 32. | 3E-5451 | [1] | REGULATOR AS-VOLTAGE (12-VOLT)(ALTERNATOR) | |
| 33. | 6N-1873 | [1] | LEAD AS | |
| 34. | 2L-8075 | [3] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | |
| 35. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 36. | 030-9612 | [4] | SCREW-FORMING (10-24X0.5-IN) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 6N-1875 | [1] | KIT-OUTPUT TERMINAL (ALTERNATOR) | ||
| (INCLUDES TERMINAL LOAD, BUSHING, WASHERS, NUTS & LOCKWASHERS) | ||||
| 105-3762 | [1] | KIT-ALTERNATOR TERMINAL | ||
| (INCLUDES TERMINAL, INSULATOR, BUSHING, WASHER, NUTS & LOCKWASHERS) | ||||
#SEBP32610625
9X-7803: ALTERNATOR GP-CHARGING
9X-7803 ALTERNATOR GP-CHARGING
24-VOLT, 100-AMPERE. BRUSHLESS, REQUIRES 2300 RPM MINIMUM IDLE SPEED
FIELD REPLACEMENT ORDER @@@@@197-8820@@@@@
OPTIONAL FIELD REPLACEMENT ORDER @@@@@316-7251@@@@@, 3T-4688 TERMINAL-RING
AN ATTACHMENT
24-VOLT, 100-AMPERE. BRUSHLESS, REQUIRES 2300 RPM MINIMUM IDLE SPEED
FIELD REPLACEMENT ORDER @@@@@197-8820@@@@@
OPTIONAL FIELD REPLACEMENT ORDER @@@@@316-7251@@@@@, 3T-4688 TERMINAL-RING
AN ATTACHMENT
Parts for your C-15 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 2. | 9X-2500 | [4] | SCREW-HEX FLANGE (10-24X38.1-MM) | |
| 3. | 6V-8187 | [1] | NUT (1/4-28-THD) | |
| 4. | 5S-7349 | [1] | BOLT (1/4-20X0.5-IN) | |
| 5. | 9L-6770 | [1] | CAP-DUST (ALTERNATOR RELAY TERMINAL) | |
| 6. | 9N-0943 | [1] | PLUG-BEARING WELL | |
| 7. | 5P-3418 | [1] | BEARING-ROLLER | |
| 8. | 5P-3419 | [1] | RACE-BEARING INNER | |
| 9. | 9L-6776 | [1] | RECTIFIER AS | |
| 10. | 6N-1944 | [1] | DIODE AS | |
| 11. | 3T-6354 | [1] | REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR) | |
| 12. | 105-3763 | [1] | CAPACITOR AS-ALTERNATOR | |
| 13. | 5P-7807 | [1] | BALL BEARING | |
| 14. | 100-6531 | [1] | FAN-ALTERNATOR (11-BLADE) | |
| 15. | 2K-4821 | [1] | LOCKNUT (5/8-18-THD) | |
| 16. | 9S-2009 | [4] | BOLT-FLANGE HEAD (10-24X3.625-IN) | |
| 17. | 6N-1872 | [2] | SCREW AS (8-32X1.25-IN) | |
| 18. | 7N-9023 | [1] | SCREW AS (8-32X26.9-MM) | |
| 19. | 106-7689 | [1] | CONNECTOR-ALTERNATOR | |
| 20. | 106-7690 | [1] | CONNECTOR-ALTERNATOR | |
| 21. | 9S-2544 | [2] | SCREW-HEX HEAD (8-32X11.13-MM) | |
| 22. | 100-6532 | [1] | COLLAR-ALTERNATOR | |
| 23. | 2L-8075 | [3] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | |
| 24. | 7N-9021 | [2] | SCREW AS (8-32X1.34-IN) | |
| 25. | 9S-2302 | [1] | ROTOR AS | |
| 26. | 9N-0942 | [1] | PLATE-COVER | |
| 27. | 9N-3388 | [5] | BOLT (10-24X0.75-IN) | |
| 28. | 106-7687 | [1] | HOUSING AS-ALTERNATOR | |
| 29. | 2P-5616 | [1] | FRAME-DRIVE END | |
| 30. | 8T-9762 | [1] | STATOR AS | |
| 31. | 202-2703 | [1] | COIL AS | |
| 32. | 9S-2390 | [1] | RETAINER | |
| 33. | 030-9612 | [4] | SCREW-FORMING (10-24X0.5-IN) | |
| 34. | 187-2034 | [1] | NUT-FLANGE (5/8-18-THD) | |
| 35. | 8T-0328 | [2] | WASHER-HARD (5.5X10X1-MM THK) | |
| 36. | 1H-3244 | [2] | LOCKWASHER | |
| 37. | 9B-7233 | [2] | LOCKWASHER | |
| AVAILABLE REPAIR KIT(S): | ||||
| 9S-2013 | [1] | KIT-RELAY TERMINAL (ALTERNATOR AIR) | ||
| (INCLUDES BUSHING, WASHERS, NUT AS, & STUD) | ||||
| 105-3764 | [1] | KIT-ALTERNATOR TERMINAL | ||
| (INCLUDES TERMINAL AS, INSULATOR, BUSHING, WASHER, NUTS & LOCKWASHERS) | ||||
#SEBP32610626
7L-7871: BATTERY GP
Parts for your C-15 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2V-7397 | [1] | CABLE AS | |
| 5P-0747 E | CABLE (00-GA, BLACK)(20-CM) | |||
| 2. | 8T-9757 | [1] | TERMINAL AS-BATTERY (NEGATIVE) | |
| 3. | 8C-5917 | [1] | TERMINAL AS-BATTERY (POSITIVE) | |
| 4. | 1M-6119 | [2] | BOLT (5/16-18X1.375-IN) | |
| 1M-6120 | [2] | NUT (5/16-18-THD) | ||
| 5. | 9G-0004 | [1] | COVER AS-TERMINAL (RED) | |
| 6. | 9G-0003 | [1] | COVER AS-TERMINAL (BLACK) | |
| 7. | 9X-9720 C | [2] | BATTERY (12-VOLT)(DRY) | |
| (EACH INCLUDES) | ||||
| 7N-0060 | [6] | VENT AS (BATTERY) | ||
| 8. | 8L-8413 | [2] | STRAP-CABLE (WHITE) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP32610627
7L-7872: BATTERY GP
Parts for your C-15 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9X-9730 CY | [2] | BATTERY GP (12-VOLT)(DRY) | |
| 2. | 8L-8413 C | [2] | STRAP-CABLE (WHITE) | |
| 3. | 9G-0004 C | [1] | COVER AS-TERMINAL (RED) | |
| 4. | 2V-7397 C | [1] | CABLE AS | |
| 5P-0747 E | CABLE (00-GA, BLACK)(20-CM) | |||
| 1M-6120 | [2] | NUT (5/16-18-THD) | ||
| 5. | 8C-5917 | [1] | TERMINAL AS-BATTERY (POSITIVE) | |
| 6. | 8T-9757 | [1] | TERMINAL AS-BATTERY (NEGATIVE) | |
| 7. | 1M-6119 | [2] | BOLT (5/16-18X1.375-IN) | |
| 8. | 9G-0003 C | [1] | COVER AS-TERMINAL (BLACK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32610628
9X-9730: BATTERY GP
Parts for your C-15 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-0060 | [6] | VENT AS |
#SEBP32610629
7W-0825: CABLE GP-BATTERY
7W-0825 CABLE GP-BATTERY
PROVIDES A POSITIVE AND A NEGATIVE CABLE ASSEMBLY
AN ATTACHMENT
PROVIDES A POSITIVE AND A NEGATIVE CABLE ASSEMBLY
AN ATTACHMENT
Parts for your C-15 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8W-3083 | [1] | CABLE AS (BATTERY) | |
| 2. | 3S-6050 | [1] | TERMINAL AS-BATTERY (NEGATIVE) | |
| 3. | 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | |
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 4. | 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | |
| 5. | 7N-5274 | [1] | COVER AS-TERMINAL (BLACK)(BATTERY) | |
| 6. | 9G-8909 | [1] | COVER-TERMINAL (BLACK)(RING) | |
| 7. | 3V-6785 | [1] | CABLE AS (BATTERY) | |
| 5P-0761 E | CABLE (00-GA, RED)(188-CM) | |||
| 8. | 3S-6049 | [1] | TERMINAL AS-BATTERY (POSITIVE) | |
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 9. | 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | |
| 10. | 8N-1725 | [1] | COVER AS-TERMINAL (RED)(BATTERY) | |
| 11. | 8N-0869 | [1] | COVER-TERMINAL (RED)(RING) | |
| E | ORDER BY THE CENTIMETER | |||
Information:
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING
Engine News
Improved Alternator Mounting Groups Are Now Used on Certain C15 and C18 Engines {1154, 1405}
2014/03/07
2014/03/07
Improved Alternator Mounting Groups Are Used for Certain C15 and C18 Industrial, Marine, and Petroleum Engines {1405}
Improved Alternator Mounting Groups Are Used for Certain C15 and C18 Industrial, Marine, and Petroleum Engines {1405}
Improved Alternator Mounting Groups Are Used for Certain C15 and C18 Industrial, Marine, and Petroleum Engines {1405}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Operation and Maintenance Manual
Special Instruction
Procedure to Restore the Residual Magnetic Field on Brushless Alternators{1405}
Procedure to Restore the Residual Magnetic Field on Brushless Alternators{1405}
Procedure to Restore the Residual Magnetic Field on Brushless Alternators{1405}
Installation of the New Alternator Support Assembly on Industrial Engines{1154, 1405}
Installation of the New Alternator Support Assembly on Industrial Engines{1154, 1405}
Installation of the New Alternator Support Assembly on Industrial Engines{1154, 1405}
Procedure to Replace the Current Alternator Mounting Groups with Improved Alternator Mounting Groups on Certain C15 and C18 Engines{1154, 1405}
Procedure to Replace the Current Alternator Mounting Groups with Improved Alternator Mounting Groups on Certain C15 and C18 Engines{1154, 1405}
Procedure to Replace the Current Alternator Mounting Groups with Improved Alternator Mounting Groups on Certain C15 and C18 Engines{1154, 1405}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR BRACKET ON CERTAIN C15, C16, AND C18 COMMERCIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR BRACKET ON CERTAIN C15, C16, AND C18 COMMERCIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR BRACKET ON CERTAIN C15, C16, AND C18 COMMERCIAL ENGINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR BRACKET ON CERTAIN C15, C16, AND C18 COMMERCIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR BRACKET ON CERTAIN C15, C16, AND C18 COMMERCIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR BRACKET ON CERTAIN C15, C16, AND C18 COMMERCIAL ENGINES
Service Letter-Asia
Systems Operation
Information Release Memo
CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR BRACKET ON CERTAIN C15, C16, AND C18 COMMERCIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR BRACKET ON CERTAIN C15, C16, AND C18 COMMERCIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR BRACKET ON CERTAIN C15, C16, AND C18 COMMERCIAL ENGINES
Testing and Adjusting
Troubleshooting
Disassembly and Assembly
Service Magazine
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}




