WORK TOOLS
BUCKET GPGROUND ENGAGING TOOLS (G.E.T.)
WORK TOOLS
BUCKET GP
#SEBP32740630
258-6900: BUCKET AS-GENERAL PURPOSE
258-6900 BUCKET AS-GENERAL PURPOSE
S/N BBX2008-UP
1.72-CU M (2.25-CU YD) HEAPED CAPACITY BARE BUCKET
FOR USE WITH SET OF EIGHT TIPS
AN ATTACHMENT
S/N BBX2008-UP
1.72-CU M (2.25-CU YD) HEAPED CAPACITY BARE BUCKET
FOR USE WITH SET OF EIGHT TIPS
AN ATTACHMENT
For full view, you need register
Parts for your 953C TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 264-8012 | [1] | HINGE AS (LH) | |
| 2. | 8Y-3840 | [1] | HINGE AS (INNER, LH) | |
| 3. | 8Y-3841 | [1] | HINGE AS (INNER, RH) | |
| 4. | 264-8013 | [1] | HINGE AS (RH) | |
| 5. | 8Y-3843 | [1] | HINGE AS (CENTER, LH) | |
| 6. | 264-8014 | [1] | HINGE AS (RH) | |
| 7. | 8Y-3858 | [6] | PLATE | |
| 8. | 8Y-4891 | [1] | PLATE AS (LH) | |
| 4V-8668 | [1] | CORNER (LH) | ||
| 8Y-9091 | [1] | BAR (LH) | ||
| 9. | 8Y-4892 | [1] | PLATE AS (RH) | |
| 4V-8667 | [1] | CORNER (RH) | ||
| 8Y-9093 | [1] | BAR (RH) | ||
| 10. | 8Y-5252 | [1] | PLATE AS | |
| 8Y-9102 | [4] | PLATE | ||
| 8Y-3851 | [1] | BAR | ||
| 8Y-3852 | [2] | BAR | ||
| 11. | 184-6391 | [2] | PLATE | |
| 12. | 258-6901 | [1] | EDGE AS-CUTTING | |
| 1V-3916 | [1] | EDGE-CUTTING | ||
| 229-7084 | [8] | ADAPTER-TIP (K-80, FLUSH MOUNT) | ||
| 13. | 300-3445 | [1] | PLATE |
#SEBP32740631
8Y-9100: BUCKET AS-GENERAL PURPOSE
8Y-9100 BUCKET AS-GENERAL PURPOSE
S/N BBX1-UP
1.72-CU M (2.25-CU YD) HEAPED CAPACITY BARE BUCKET
REPLACED BY @@@@@258-6897@@@@@
AN ATTACHMENT
S/N BBX1-UP
1.72-CU M (2.25-CU YD) HEAPED CAPACITY BARE BUCKET
REPLACED BY @@@@@258-6897@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 953C TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9V-6572 | [1] | EDGE-CUTTING | |
| 2. | 8Y-5252 | [1] | PLATE AS | |
| 2A. | 8Y-3851 | [1] | BAR | |
| 2B. | 8Y-3852 | [2] | BAR | |
| 2C. | 8Y-9102 | [4] | PLATE | |
| 3. | 8Y-3858 | [7] | PLATE | |
| 4. | 5V-7395 | [1] | CORNER (LH) | |
| 5. | 5V-7396 | [1] | CORNER (RH) | |
| 6. | 184-6391 | [2] | PLATE | |
| 7. | 8Y-3843 | [1] | HINGE AS (CENTER, LH)(TILT) | |
| 8. | 8Y-3844 | [1] | HINGE AS (CENTER, RH)(TILT) | |
| 9. | 8Y-3853 | [4] | PLATE | |
| 10. | 8Y-3839 | [1] | HINGE AS (LH-OUTER)(LIFT-OUTER) | |
| 11. | 8Y-3840 | [1] | HINGE AS (INNER, LH)(LIFT-INNER) | |
| 12. | 8Y-3841 | [1] | HINGE AS (INNER, RH)(LIFT-INNER) | |
| 13. | 8Y-3842 | [1] | HINGE AS (RH-OUTER)(LIFT-OUTER) |
#SEBP32740632
8Y-9101: BUCKET AS-GENERAL PURPOSE
8Y-9101 BUCKET AS-GENERAL PURPOSE
S/N BBX1-UP
1.72-CU M (2.25-CU YD) HEAPED CAPACITY BARE BUCKET
REPLACED BY @@@@@258-6900@@@@@
AN ATTACHMENT
S/N BBX1-UP
1.72-CU M (2.25-CU YD) HEAPED CAPACITY BARE BUCKET
REPLACED BY @@@@@258-6900@@@@@
AN ATTACHMENT
For full view, you need register
#SEBP32740633
198-8399: BUCKET GP-MULTIPURPOSE
198-8399 BUCKET GP-MULTIPURPOSE
S/N BBX1-UP
1.5-CU M (2.0-CU YD) HEAPED CAPACITY BARE BUCKET
PART OF 198-8398 BUCKET AR-MULTIPURPOSE
AN ATTACHMENT
S/N BBX1-UP
1.5-CU M (2.0-CU YD) HEAPED CAPACITY BARE BUCKET
PART OF 198-8398 BUCKET AR-MULTIPURPOSE
AN ATTACHMENT
For full view, you need register
Parts for your 953C TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4T-8082 | [2] | BIT-END | |
| 2. | 8V-7419 | [2] | PIN AS | |
| 3. | 7X-0365 | [2] | BOLT (3/4-10X1.5-IN) | |
| 4. | 7X-0582 | [2] | WASHER-HARD (20X44.5X6-MM THK) | |
| 5. | 9K-9731 | [2] | SPACER (20.4X28.5X14.2-MM THK) | |
| 6. | 3K-8150 | [1] | LUG | |
| 7. | 4F-3654 | [17] | BOLT-PLOW (5/8-11X2-IN) | |
| 8. | 7X-0448 | [17] | NUT (5/8-11-THD) | |
| 9. | 4T-8083 | [1] | EDGE-CUTTING | |
| 10. | 5B-3807 | [1] | PLATE-FILLER | |
| 11. | 4F-2699 | [1] | BLOCK-STOP | |
| 12. | 147-2253 | [1] | BOWL AS | |
| 13. | 5G-8267 | [1] | EDGE-CUTTING | |
| 14. | 5G-8269 | [2] | BIT-END | |
| 15. | 8P-9770 | [1] | PLATE | |
| 16. | 9V-6572 | [1] | EDGE-CUTTING | |
| 17. | 6V-3607 | [1] | FILM-NOTICE (BUCKET CORNER GUARD SYSTEM) | |
| 18. | 4K-0149 | [2] | PLUG-CUP | |
| 19. | 5V-7396 | [1] | CORNER (RH) | |
| 20. | 7V-3997 | [4] | BAR | |
| 21. | 9C-0729 | [2] | HINGE | |
| 22. | 5V-7395 | [1] | CORNER (LH) | |
| 23. | 8V-9327 | [1] | BULLDOZER AS | |
| 24. | 1V-7098 | [4] | BUSHING | |
| 25. | 7K-9203 | [8] | SEAL-LIP TYPE | |
| 26. | 3B-8489 | [4] | FITTING-GREASE (1/8-27 PTF) | |
| 27. | 8V-9489 | [1] | HINGE AS (LIFT-LH OUTER) | |
| 28. | 8V-9488 | [1] | HINGE AS (LIFT, INNER, LH)(LIFT-LH INNER) | |
| 29. | 8Y-4756 | [1] | HINGE AS (TILT, CENTER, LH)(TILT-LH) | |
| 30. | 8Y-4757 | [1] | HINGE AS (TILT-RH) | |
| 31. | 8V-9494 | [1] | HINGE AS (LIFT, INNER, RH)(LIFT-RH INNER) | |
| 32. | 8V-9495 | [1] | HINGE AS (LIFT-RH OUTER) |
#SEBP32740634
264-3279: BUCKET GP-MULTIPURPOSE
264-3279 BUCKET GP-MULTIPURPOSE
S/N BBX1-UP
1.5-CU M (2.0-CU YD) HEAPED CAPACITY BARE BUCKET
FOR USE WITH 3RD VALVE
AN ATTACHMENT
S/N BBX1-UP
1.5-CU M (2.0-CU YD) HEAPED CAPACITY BARE BUCKET
FOR USE WITH 3RD VALVE
AN ATTACHMENT
For full view, you need register
Parts for your 953C TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 264-3280 Y | [1] | BUCKET GP-MULTIPURPOSE | ||
| 9V-8168 Y | [2] | CYLINDER & SEAL GP-BUCKET | ||
| 5G-8059 Y | [1] | LINES GP-BUCKET | ||
| S/N BBX1-2672 | ||||
| 284-0868 Y | [1] | LINES GP-BUCKET CYLINDER | ||
| S/N BBX2673-UP | ||||
| 8V-7370 Y | [1] | MOUNTING GP-CYLINDER | ||
| [1] | PLATE-IDENTIFICATION (SERIAL NUMBER)(MULTIPURPOSE BUCKET) | |||
| (ON UPPER RH OF BULLDOZER AS) | ||||
| 136-0155 M | [2] | SETSCREW (M4X0.7X8-MM) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32740635
264-3280: BUCKET GP-MULTIPURPOSE
264-3280 BUCKET GP-MULTIPURPOSE
S/N BBX1-UP
1.5-CU M (2.0-CU YD) HEAPED CAPACITY BARE BUCKET
PART OF 264-3279 BUCKET GP-MULTIPURPOSE
AN ATTACHMENT
S/N BBX1-UP
1.5-CU M (2.0-CU YD) HEAPED CAPACITY BARE BUCKET
PART OF 264-3279 BUCKET GP-MULTIPURPOSE
AN ATTACHMENT
For full view, you need register
Parts for your 953C TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4T-8082 | [2] | BIT-END | |
| 2. | 4T-8083 | [1] | EDGE-CUTTING | |
| 3. | 8V-7419 | [2] | PIN AS | |
| 4. | 9K-9731 | [2] | SPACER (20.4X28.5X14.2-MM THK) | |
| 6. | 264-3284 | [1] | BOWL AS | |
| 6A. | 5G-8267 | [1] | EDGE-CUTTING | |
| 6B. | 5G-8269 | [2] | BIT-END | |
| 6C. | 6V-3607 A | [1] | FILM-NOTICE (BUCKET CORNER GUARD SYSTEM) | |
| 6D. | 9V-6572 | [1] | EDGE-CUTTING | |
| 6E. | [1] | PLATE AS (RH) | ||
| 8E-5302 | [1] | CORNER (RH) | ||
| 6F. | [1] | PLATE AS (LH) | ||
| 8E-5303 | [1] | CORNER (LH) | ||
| 7. | 265-6475 Y | [1] | BULLDOZER GP | |
| 8. | 4F-3654 | [17] | BOLT-PLOW (5/8-11X2-IN) | |
| 9. | 7X-0365 | [2] | BOLT (3/4-10X1.5-IN) | |
| 10. | 7X-0448 | [17] | NUT (5/8-11-THD) | |
| 11. | 7X-0582 | [2] | WASHER-HARD (20X44.5X6-MM THK) | |
| A | NOT PART OF THIS GROUP | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32740636
265-6475: BULLDOZER GP
For full view, you need register
Parts for your 953C TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [4] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 265-6476 | [1] | BULLDOZER AS | |
| 2A. | 1V-8098 | [4] | BLOCK | |
| 2B. | 2C-9259 | [2] | PLATE-IDENTIFICATION (CAT) | |
| 2C. | 2V-7177 | [4] | BLOCK | |
| 2D. | 3V-6035 | [2] | BAR | |
| 2E. | 5D-2643 | [2] | LUG | |
| 2F. | 8V-9488 | [1] | HINGE AS (LIFT, INNER, LH) | |
| 2G. | 8V-9494 | [1] | HINGE AS (LIFT, INNER, RH) | |
| 2H. | 8Y-4756 | [1] | HINGE AS (TILT, CENTER, LH) | |
| 2J. | 265-6481 | [1] | HINGE AS (LIFT, OUTER, RH) | |
| 2K. | 265-6482 | [1] | HINGE AS (LIFT, OUTER, LH) | |
| 2L. | 265-6483 | [1] | HINGE AS (TILT, CENTER, RH) | |
| 2M. | 8P-9770 | [2] | PLATE | |
| 3. | 1V-7098 | [4] | BUSHING | |
| 4. | 7K-9203 | [8] | SEAL-LIP TYPE |
#SEBP32740637
3G-4428: EDGE GP-BIT & CUTTING
3G-4428 EDGE GP-BIT & CUTTING
S/N BBX1-UP
FOR USE WITH MULTIPURPOSE BUCKET, GENERAL PURPOSE BUCKET
AN ATTACHMENT
S/N BBX1-UP
FOR USE WITH MULTIPURPOSE BUCKET, GENERAL PURPOSE BUCKET
AN ATTACHMENT
For full view, you need register
Parts for your 953C TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-0295 | [2] | EDGE-CUTTING | |
| 2. | 4T-8091 | [2] | EDGE-END | |
| 3. | 253-0062 | [1] | GUARD-BUCKET CORNER (RH) | |
| 4. | 253-0063 | [1] | GUARD-BUCKET CORNER (LH) | |
| 5. | 1J-5607 | [10] | BOLT-PLOW (1-8X2.75-IN) | |
| 6. | 2J-3507 | [10] | NUT-FULL (1-8-THD) | |
| 7. | 3K-9770 | [4] | NUT-FULL (1-1/4-7-THD) | |
| 8. | 8T-9079 | [4] | BOLT-PLOW (1-1/4-7X3.35-IN) |
#SEBP32740638
133-0687: EDGE GP-CUTTING
133-0687 EDGE GP-CUTTING
S/N BBX1-UP
FOR USE WITH @@@@@ 8Y-9100@@@@@, GENERAL PURPOSE, MULTIPURPOSE BUCKETS
AN ATTACHMENT
S/N BBX1-UP
FOR USE WITH @@@@@ 8Y-9100@@@@@, GENERAL PURPOSE, MULTIPURPOSE BUCKETS
AN ATTACHMENT
For full view, you need register
Parts for your 953C TRACK LOADER:
CATERPILLAR SIS#SEBP32740639
7T-9325: EDGE GP-CUTTING
7T-9325 EDGE GP-CUTTING
S/N BBX1-UP
25-MM THICK
REPLACED BY @@@@@264-6235@@@@@
FOR USE WITH MULTIPURPOSE BUCKET, GENERAL PURPOSE BUCKET, TOOTH GP
CANNOT BE USED WITH FLUSH MOUNTED TEETH BUCKET OR FULL LENGTH CUTTING EDGE
AN ATTACHMENT
S/N BBX1-UP
25-MM THICK
REPLACED BY @@@@@264-6235@@@@@
FOR USE WITH MULTIPURPOSE BUCKET, GENERAL PURPOSE BUCKET, TOOTH GP
CANNOT BE USED WITH FLUSH MOUNTED TEETH BUCKET OR FULL LENGTH CUTTING EDGE
AN ATTACHMENT
For full view, you need register
