224-6517 CONVERSION AR-ENGINE S/N AXC1-UP LOW SOUND FOR USE WITH SUPPRESSION GP-SOUND 972G II WHEEL LOADER

Part No	Qty	Parts name
224-5053	[1]	DUST EJECTOR GP
2S-4460	[1]	HOSE-DISPOSAL
5P-0597	[4]	CLAMP-HOSE
224-5693	[1]	TUBE AS
192-9057	[1]	FILM (LOW SOUND)
	[1]	FILM-INFORMATION (EXTERIOR SOUND, 107-DB)(EXTERIOR)
223-3646	[1]	MUFFLER AS
141-1480	[1]	CLAMP AS
220-9851	[1]	PIPE AS-EXHAUST
221-2167 Y	[1]	SUPPRESSION GP-SOUND
Y		SEPARATE ILLUSTRATION

#SEBP32760011

180-3195: ENGINE AR

ENGINE AR

180-3195 ENGINE AR
S/N 5ED1-UP
198 BRAKE KW (265 BHP) AT 2100 RPM
PART OF 180-0582 GENERAL AR

i01845869 SEBP3276

For full view, you need register

Parts for your 972G II WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
171-3062 Y	[1]	CAMSHAFT GP
200-5026 Y	[1]	CONTROL & MTG GP-ENGINE ELEK
185-5825 Y	[1]	COOLER GP-ENGINE & XMSN OIL
170-6487 Y	[1]	COVER GP-CYLINDER BLOCK
209-6669 Y	[1]	COVER GP-FRONT HOUSING (AIR COMPRESSOR)
		S/N 5ED438-UP
170-1217 Y	[1]	COVER GP-MODULE CONNECTOR
		S/N 5ED438-820
169-4190 Y	[1]	CRANKSHAFT GP
115-2983 Y	[1]	CYLINDER BLOCK GP
		S/N 5ED1-437
210-8429 Y	[1]	CYLINDER BLOCK GP
		S/N 5ED438-1021
226-4914 Y	[1]	CYLINDER BLOCK GP
		S/N 5ED1022-UP
116-1085 Y	[1]	CYLINDER HEAD GP
185-5308 Y	[1]	DAMPER & PULLEY GP
127-3288 Y	[1]	ELBOW GP-AIR INLET
201-5174	[1]	ELECTRONICS GP-ENGINE RATINGS
		S/N 5ED438-UP
185-5874 Y	[1]	FILLER GP-ENGINE OIL
117-2751 Y	[1]	FILTER GP-ENGINE OIL
116-5436 Y	[1]	FILTER GP-FUEL
		S/N 5ED1-437
185-5803 Y	[1]	FLYWHEEL GP
185-5873 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK)
117-2750 Y	[1]	GEAR GP-FRONT
194-8211 Y	[1]	HOUSING & REGULATOR GP
185-5811 Y	[1]	HOUSING GP-FLYWHEEL
133-7075 Y	[1]	HOUSING GP-FRONT
117-2748 Y	[1]	LIFTING GP-ENGINE
185-5881 Y	[1]	LINES GP-AIR
191-0788 Y	[1]	LINES GP-FUEL
185-2187 Y	[1]	LINES GP-TURBOCHARGER OIL
116-5460 Y	[1]	LINES GP-WATER (BYPASS)
118-2808 Y	[1]	LINES GP-WATER (INLET ELBOW)
185-5378 Y	[1]	MANIFOLD GP-EXHAUST
116-5405 Y	[1]	MANIFOLD GP-INLET
185-7252 Y	[1]	MOUNTING GP-ALTERNATOR
116-5408 Y	[1]	MOUNTING GP-VALVE MECHANISM
183-1258 Y	[1]	PAN GP-OIL
197-9561 Y	[1]	PANEL GP-SOUND SUPPRESSION
		S/N 5ED1-437
130-0863 Y	[6]	PISTON & ROD GP
200-6085 Y	[1]	PLUG GP-ENGINE
117-2746 Y	[1]	PUMP GP-ENGINE OIL
189-0351 Y	[6]	PUMP GP-FUEL INJECTION
191-0789 Y	[1]	PUMP GP-FUEL PRIMING
116-5428 Y	[1]	PUMP & MTG GP-FUEL TRANSFER
		S/N 5ED1-437
206-7336 Y	[1]	PUMP & MTG GP-FUEL TRANSFER
		S/N 5ED438-UP
117-2674 Y	[1]	PUMP GP-WATER
116-1091 Y	[1]	SEAL GP-CRANKSHAFT (REAR)
183-5518 Y	[1]	SUPPORT GP-ENGINE
191-2926 Y	[1]	TURBOCHARGER GP
117-2749 Y	[1]	VALVE MECHANISM GP
197-9443 Y	[1]	WIRING GP-ELECTRONIC CONTROL
		S/N 5ED1-820
216-9607 Y	[1]	WIRING GP-ENGINE (ELECTRONIC CONTROL)
		S/N 5ED821-UP
117-2760 Y	[1]	WIRING GP-UNIT INJECTOR

		GASKET KITS WILL BE PROVIDED WHEN AVAILABLE
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP32760012

221-6891: ENGINE AR

ENGINE AR

221-6891 ENGINE AR
S/N 5ED934-UP
PART OF 214-4570 GENERAL AR

i01888555 SEBP3276

For full view, you need register

Parts for your 972G II WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
171-3062 Y	[1]	CAMSHAFT GP
200-5026 Y	[1]	CONTROL & MTG GP-ENGINE ELEK
185-5825 Y	[1]	COOLER GP-ENGINE & XMSN OIL
170-6487 Y	[1]	COVER GP-CYLINDER BLOCK
209-6669 Y	[1]	COVER GP-FRONT HOUSING (AIR COMPRESSOR)
169-4190 Y	[1]	CRANKSHAFT GP
210-8429 Y	[1]	CYLINDER BLOCK GP
		S/N 5ED934-1021
226-4914 Y	[1]	CYLINDER BLOCK GP
		S/N 5ED1022-UP
116-1085 Y	[1]	CYLINDER HEAD GP
185-5308 Y	[1]	DAMPER & PULLEY GP
127-3288 Y	[1]	ELBOW GP-AIR INLET
201-5174	[1]	ELECTRONICS GP-ENGINE RATINGS
185-5874 Y	[1]	FILLER GP-ENGINE OIL
117-2751 Y	[1]	FILTER GP-ENGINE OIL
185-5803 Y	[1]	FLYWHEEL GP
185-5873 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK)
117-2750 Y	[1]	GEAR GP-FRONT
185-5811 Y	[1]	HOUSING GP-FLYWHEEL
133-7075 Y	[1]	HOUSING GP-FRONT
117-2748 Y	[1]	LIFTING GP-ENGINE
185-5881 Y	[1]	LINES GP-AIR
191-0788 Y	[1]	LINES GP-FUEL
185-2187 Y	[1]	LINES GP-TURBOCHARGER OIL
116-5460 Y	[1]	LINES GP-WATER (BYPASS)
118-2808 Y	[1]	LINES GP-WATER (INLET ELBOW)(INLET ELBOW REARWARD)
185-5378 Y	[1]	MANIFOLD GP-EXHAUST
116-5405 Y	[1]	MANIFOLD GP-INLET
185-7252 Y	[1]	MOUNTING GP-ALTERNATOR
116-5408 Y	[1]	MOUNTING GP-VALVE MECHANISM
183-1258 Y	[1]	PAN GP-OIL
130-0863 Y	[6]	PISTON & ROD GP
200-6085 Y	[1]	PLUG GP-ENGINE
206-7336 Y	[1]	PUMP & MTG GP-FUEL TRANSFER
117-2746 Y	[1]	PUMP GP-ENGINE OIL
189-0351 Y	[6]	PUMP GP-FUEL INJECTION
191-0789 Y	[1]	PUMP GP-FUEL PRIMING
117-2674 Y	[1]	PUMP GP-WATER
216-8361 Y	[1]	HOUSING & REGULATOR GP
116-1091 Y	[1]	SEAL GP-CRANKSHAFT (REAR)
183-5518 Y	[1]	SUPPORT GP-ENGINE
191-2926 Y	[1]	TURBOCHARGER GP
117-2749 Y	[1]	VALVE MECHANISM GP
216-9607 Y	[1]	WIRING GP-ENGINE (ELECTRONIC CONTROL)
117-2760 Y	[1]	WIRING GP-UNIT INJECTOR

		GASKET KITS WILL BE PROVIDED WHEN AVAILABLE
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP32760013

223-1557: ENGINE AR

ENGINE AR

223-1557 ENGINE AR
S/N 5ED985-UP
PART OF 214-4570 GENERAL AR

i01983080 SEBP3276

For full view, you need register

Parts for your 972G II WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
171-3062 Y	[1]	CAMSHAFT GP
200-5026 Y	[1]	CONTROL & MTG GP-ENGINE ELEK
		S/N 5ED985-1634
236-0963 Y	[1]	CONTROL & MTG GP-ENGINE ELEK
		S/N 5ED1635-UP
185-5825 Y	[1]	COOLER GP-ENGINE & XMSN OIL
170-6487 Y	[1]	COVER GP-CYLINDER BLOCK
		S/N 5ED985-1240
228-2769 Y	[1]	COVER GP-CYLINDER BLOCK
		S/N 5ED1241-UP
209-6669 Y	[1]	COVER GP-FRONT HOUSING (AIR COMPRESSOR)
169-4190 Y	[1]	CRANKSHAFT GP
226-4914 Y	[1]	CYLINDER BLOCK GP
116-1085 Y	[1]	CYLINDER HEAD GP
185-5308 Y	[1]	DAMPER & PULLEY GP
127-3288 Y	[1]	ELBOW GP-AIR INLET
201-5174	[1]	ELECTRONICS GP-ENGINE RATINGS
185-5874 Y	[1]	FILLER GP-ENGINE OIL
117-2751 Y	[1]	FILTER GP-ENGINE OIL
185-5803 Y	[1]	FLYWHEEL GP
185-5873 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK)
		S/N 5ED985-1479
236-5035 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK)
		S/N 5ED1480-UP
117-2750 Y	[1]	GEAR GP-FRONT
185-5811 Y	[1]	HOUSING GP-FLYWHEEL
133-7075 Y	[1]	HOUSING GP-FRONT
117-2748 Y	[1]	LIFTING GP-ENGINE
185-5881 Y	[1]	LINES GP-AIR (TURBO COMPRESSOR)
191-0788 Y	[1]	LINES GP-FUEL
185-2187 Y	[1]	LINES GP-TURBOCHARGER OIL
116-5460 Y	[1]	LINES GP-WATER (BYPASS)
118-2808 Y	[1]	LINES GP-WATER (INLET ELBOW)(INLET ELBOW REARWARD)
185-5378 Y	[1]	MANIFOLD GP-EXHAUST
116-5405 Y	[1]	MANIFOLD GP-INLET
138-2550 Y	[1]	MOUNTING GP-FAN DRIVE
116-5408 Y	[1]	MOUNTING GP-VALVE MECHANISM
183-1258 Y	[1]	PAN GP-OIL
130-0863 Y	[6]	PISTON & ROD GP
200-6085 Y	[1]	PLUG GP-ENGINE
206-7336 Y	[1]	PUMP & MTG GP-FUEL TRANSFER
117-2746 Y	[1]	PUMP GP-ENGINE OIL
189-0351 Y	[6]	PUMP GP-FUEL INJECTION
191-0789 Y	[1]	PUMP GP-FUEL PRIMING
117-2674 Y	[1]	PUMP GP-WATER
216-8361 Y	[1]	HOUSING & REGULATOR GP
		S/N 5ED985-1375
236-4891 Y	[1]	HOUSING & REGULATOR GP
		S/N 5ED1376-UP
116-1091 Y	[1]	SEAL GP-CRANKSHAFT (REAR)
183-5518 Y	[1]	SUPPORT GP-ENGINE
191-2926 Y	[1]	TURBOCHARGER GP
117-2749 Y	[1]	VALVE MECHANISM GP
216-9607 Y	[1]	WIRING GP-ENGINE (ELECTRONIC CONTROL)
117-2760 Y	[1]	WIRING GP-UNIT INJECTOR

		GASKET KITS WILL BE PROVIDED WHEN AVAILABLE
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP32760014

180-3197: INSTALLATION AR-ENGINE

INSTALLATION AR-ENGINE

180-3197 INSTALLATION AR-ENGINE
S/N AXC1-UP
PART OF 180-0582, 214-4570 GENERAL AR

i02009962 SEBP3276

For full view, you need register

Parts for your 972G II WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
188-0800 Y	[1]	AIR CLEANER GP
185-5877 Y	[1]	ALTERNATOR GP-CHARGING
		S/N AXC1-535
220-1861 Y	[1]	ALTERNATOR GP-CHARGING
		S/N AXC536-UP
188-3521 Y	[1]	DUST EJECTOR GP
		S/N AXC1-738
224-5053 Y	[1]	DUST EJECTOR GP
		S/N AXC739-UP
Y	[1]	EXTENSION GP-EXHAUST
188-3520 Y	[1]	FUMES DISPOSAL GP
215-4563 Y	[1]	LINES GP-AIR
220-0178 Y	[1]	MOUNTING GP-ALTERNATOR
		S/N AXC536-738
232-7374 Y	[1]	MOUNTING GP-ALTERNATOR
		S/N AXC739-UP
185-5298 Y	[1]	MOUNTING GP-ENGINE & XMSN
188-3518 Y	[1]	MUFFLER GP
		S/N AXC1-738
242-3002 Y	[1]	MUFFLER GP
		S/N AXC739-UP
185-7250 Y	[1]	PULLEY GP-IDLER
		S/N AXC1-535
174-0620 Y	[1]	STARTING MOTOR GP-ELECTRIC
		S/N AXC1-535
217-5214 Y	[1]	STARTING MOTOR GP-ELECTRIC
		S/N AXC536-UP
185-5869 Y	[1]	BELT TENSIONER GP
		S/N AXC1-535
220-1857 Y	[1]	BELT TENSIONER GP
		S/N AXC536-738
232-7375 Y	[1]	BELT TENSIONER GP
		S/N AXC739-UP
Y		SEPARATE ILLUSTRATION

#SEBP32760015

185-5869: BELT TENSIONER GP

BELT TENSIONER GP

185-5869 BELT TENSIONER GP
S/N AXC1-535
PART OF 180-3197 INSTALLATION AR-ENGINE

i01467351 SEBP3276

For full view, you need register

Parts for your 972G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	133-7023	[2]	PULLEY AS-IDLER
			(EACH INCLUDES)
1A.	151-2898	[1]	SPACER (10.4X38.1X20-MM THK)
1B.	151-2900 M	[1]	BOLT (M10X1.5X54.25-MM)
1C.	166-6358	[1]	COVER-DUST
2.	173-1498	[1]	PULLEY AS-IDLER (8-GROOVE)
2A.	173-1500	[1]	SPACER (10.4X45.1X1.8-MM THK)
2B.	151-2900 M	[1]	BOLT (M10X1.5X54.25-MM)
2C.	166-6358	[1]	COVER-DUST
3.	189-2218	[1]	BELT-SERPENTINE
4.	193-7732	[1]	BELT TENSIONER
5.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
6.	8T-4172 M	[1]	BOLT (M10X1.5X80-MM)
	M		METRIC PART

#SEBP32760016

220-1857: BELT TENSIONER GP

BELT TENSIONER GP

220-1857 BELT TENSIONER GP
S/N AXC536-UP
PART OF 180-3197 INSTALLATION AR-ENGINE

i01801499 SEBP3276

For full view, you need register

Parts for your 972G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	173-1498	[2]	PULLEY AS-IDLER (8-GROOVE)(8 GROOVES)
	151-2900 M	[1]	BOLT (M10X1.5X54.25-MM)
	166-6358	[1]	COVER-DUST
	173-1500	[1]	SPACER (10.4X45.1X1.8-MM THK)
2.	190-0643	[1]	BELT TENSIONER GP
3.	220-1856	[1]	BELT-SERPENTINE
4.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
5.	8T-4172 M	[1]	BOLT (M10X1.5X80-MM)
	M		METRIC PART

#SEBP32760017

232-7375: BELT TENSIONER GP

BELT TENSIONER GP

232-7375 BELT TENSIONER GP
S/N AXC739-943
PART OF 180-3197 INSTALLATION AR-ENGINE

i02086851 SEBP3276

For full view, you need register

Parts for your 972G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	173-1498	[1]	PULLEY AS-IDLER (8-GROOVE)
1A.	151-2900 M	[1]	BOLT (M10X1.5X54.25-MM)
1B.	166-6358	[1]	COVER-DUST
2.	197-9641	[2]	PULLEY AS-IDLER
3.	226-9380	[1]	BELT-SERPENTINE
4.	233-8686	[1]	BELT TENSIONER
5.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
6.	8T-4172 M	[1]	BOLT (M10X1.5X80-MM)
	M		METRIC PART

#SEBP32760018

232-7375: BELT TENSIONER GP

BELT TENSIONER GP

232-7375 BELT TENSIONER GP
S/N AXC944-UP
PART OF 180-3197 INSTALLATION AR-ENGINE

i02504837 SEBP3276

For full view, you need register

Parts for your 972G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	173-1498	[1]	PULLEY AS-IDLER (8-GROOVE)
1A.	151-2900 M	[1]	BOLT (M10X1.5X54.25-MM)
1B.	166-6358	[1]	COVER-DUST
2.	197-9641	[2]	PULLEY AS-IDLER
3.	260-6107 C	[1]	BELT-SERPENTINE
4.	233-8686	[1]	BELT TENSIONER
5.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
6.	8T-4172 M	[1]	BOLT (M10X1.5X80-MM)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP32760019

171-3062: CAMSHAFT GP

CAMSHAFT GP

171-3062 CAMSHAFT GP
S/N 5ED1-UP
PART OF 180-3195, 221-6891, 223-1557 ENGINE AR

i01462918 SEBP3276

For full view, you need register

Parts for your 972G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-5217 M	[5]	BOLT (M8X1.25X20-MM)
2.	9M-1974	[5]	WASHER-HARD (8.8X16X2-MM THK)
3.	178-3643	[1]	PIN-THRUST
4.	133-7068	[1]	GASKET-CAMSHAFT COVER
5.	171-3063	[1]	CAMSHAFT AS
5A.	1B-8705	[1]	KEY-WOODRUFF
5B.	133-7100	[1]	GEAR-CAMSHAFT DRIVE (96-TEETH)
6.	4K-9841	[1]	WASHER (0.406X0.75X0.064-IN THK)
7.	118-0459	[1]	COVER
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

Information:

ENGINE ARRANGEMENT

ENGINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/18

Engine News

Improved Registration Process for Retrofit Products {1000, 7000}
2011/04/15

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/18

Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}

Special Instruction

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Technical Information Bulletin

A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}

Tool Operating Manual

Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}

142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}

Systems Operation

Engine Design
3176C and 3196 Engines for Caterpillar Built Machines

General Information
3176C and 3196 Engines for Caterpillar Built Machines

Reuse And Salvage Guidelines

Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300}
Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300}

Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}

Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Contamination Control Guidelines

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

Applied Failure Analysis

Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}

Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}

Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}

Troubleshooting

Engine Will Not Crank
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Low Engine Oil Pressure
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Engine Stalls at Low RPM
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Excessive White Smoke
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Excessive Black Smoke
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Excessive White Smoke
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Low Power/Poor or No Response to Throttle
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Poor Acceleration or Response
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Engine Overspeeds on Start-up
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Engine Cranks but Will Not Start
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Poor Acceleration or Response
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

E190 Engine Overspeed Warning
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Diagnostic Codes
3176C and 3196 Engines for Caterpillar Built Machines

Engine Cranks but Will Not Start
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

E190 Engine Overspeed Warning
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Low Power/Poor or No Response to Throttle
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Engine Vibration
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Excessive Fuel Consumption
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Engine Misfires, Runs Rough or Is Unstable
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Service Magazine

A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2001/01/08

Caterpillar's Position On The Use Of Biodiesel Fuel In Caterpillar Engines {1000}
2012/08/28

A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/03/25

Responsibilities for Emission Certified Engines {1000}
2005/10/03

Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
2009/04/27

Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000}
2009/11/18

Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
2011/02/11

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/25

Caterpillar Parts SIS Catalog 972G II :

266-0523 MACHINE AR

214-4570 GENERAL AR

180-0582 GENERAL AR

263-9919 CONVERSION AR-MACHINE

213-3414 CONVERSION AR-MACHINE

188-5037 CONVERSION AR-CERTIFICATION

162-0053 CONVERSION AR-CERTIFICATION

180-3197 INSTALLATION AR-ENGINE

185-5869 BELT TENSIONER GP

220-1857 BELT TENSIONER GP

232-7375 BELT TENSIONER GP

Truck sale:

69,000

Caterpillar 972GII, Construction
- Wheel Loaders
MILTON CAT

77,500

Caterpillar 972GII, Construction
- Wheel Loaders
BLANCHARD MACHINERY CO.

CATERPILLAR 972GII 2004
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
MACALLISTER MACHINERY
United States

CATERPILLAR 972GII 2003
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;

$76,739 USD

CATERPILLAR 972GII 2005
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
WESTRAC PTY. LTD.
- South Guildford - Western Australia