ELECTRICAL AND STARTING SYSTEM
SENSOR GPSTARTING AID GP
STARTING MOTOR GP
SWITCH GP
ELECTRICAL AND STARTING SYSTEM
SENSOR GP#SEBP32760250
197-8391: SENSOR GP-TEMPERATURE
197-8391 SENSOR GP-TEMPERATURE
S/N 5ED1-UP
PART OF 216-9607 WIRING GP-ENGINE
Type 2
S/N 5ED1-UP
PART OF 216-9607 WIRING GP-ENGINE
Type 2
Parts for your 972G II WHEEL LOADER:
CATERPILLAR SIS#SEBP32760251
197-8392: SENSOR GP-TEMPERATURE
197-8392 SENSOR GP-TEMPERATURE
S/N 5ED1-UP
PART OF 216-9607 WIRING GP-ENGINE
Type 1
S/N 5ED1-UP
PART OF 216-9607 WIRING GP-ENGINE
Type 1
Parts for your 972G II WHEEL LOADER:
CATERPILLAR SIS#SEBP32760252
197-8392: SENSOR GP-TEMPERATURE
197-8392 SENSOR GP-TEMPERATURE
S/N 5ED1-UP
PART OF 216-9607 WIRING GP-ENGINE
Type 2
S/N 5ED1-UP
PART OF 216-9607 WIRING GP-ENGINE
Type 2
Parts for your 972G II WHEEL LOADER:
CATERPILLAR SIS#SEBP32760253
184-4918: STARTING AID AR-ETHER
184-4918 STARTING AID AR-ETHER
S/N AXC1-UP
S/N AXC1-UP
Parts for your 972G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 184-4919 Y | [1] | STARTING AID GP-ETHER | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32760254
184-4919: STARTING AID GP-ETHER
184-4919 STARTING AID GP-ETHER
S/N AXC1-UP
PART OF 213-3414 CONVERSION AR-MACHINE, 184-4918 STARTING AID AR-ETHER
S/N AXC1-UP
PART OF 213-3414 CONVERSION AR-MACHINE, 184-4918 STARTING AID AR-ETHER
Parts for your 972G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-6332 | [1] | VALVE GP-ETHER STARTING (24-VOLT) | |
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 7N-9801 | [1] | GASKET | ||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 2. | 4E-4438 | [3] | BRACKET | |
| 3. | 5P-2948 | [1] | FITTING AS | |
| 4. | 6N-9995 | [1] | ATOMIZER-ETHER | |
| 5. | 7N-0140 | [1] | TUBE AS-COIL | |
| 6. | 7N-2059 | [1] | CLAMP AS (CYLINDER) | |
| 7. | 140-3714 | [1] | TUBE | |
| 8. | 212-3177 | [1] | TUBE | |
| 9. | 6V-2686 | [3] | CLIP | |
| 10. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 11. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 12. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 13. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 15. | 8T-4189 M | [5] | BOLT (M8X1.25X20-MM) | |
| 16. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 17. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 7N-0296 AF | [1] | CYLINDER AS-ETHER | ||
| (MAY BE PROCURED LOCALLY AT YOUR CATERPILLAR DEALER) | ||||
| A | NOT PART OF THIS GROUP | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
#SEBP32760255
165-4619: STARTING MOTOR GP-ELECTRIC
165-4619 STARTING MOTOR GP-ELECTRIC
S/N AXC1-UP
24 VOLT
PART OF 174-0620, 217-5214 STARTING MOTOR GP-ELECTRIC
S/N AXC1-UP
24 VOLT
PART OF 174-0620, 217-5214 STARTING MOTOR GP-ELECTRIC
Parts for your 972G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3T-3434 | [6] | PLUG | |
| 2. | 7T-3279 | [1] | HOUSING AS | |
| 3. | 212-0443 | [1] | TERMINAL AS | |
| 4. | 6V-8188 | [4] | NUT (1/2-13-THD) | |
| 5. | 7X-0562 | [4] | WASHER-HARD (13.5X19X0.8-MM THK) | |
| 6. | 3T-3422 | [1] | WIRE AS | |
| 7. | 7T-3278 | [1] | HOLDER AS-BRUSH (STARTING MOTOR) | |
| 8. | 7T-3277 | [1] | COIL AS-FIELD | |
| 9. | 7T-3454 | [1] | INSULATOR | |
| 10. | 283-1107 | [1] | KIT-CONNECTOR (STARTING MOTOR) | |
| (INCLUDES CONNECTORS, BOLT & TERMINAL STARTER) | ||||
| 11. | 7T-3451 | [1] | KIT-INSULATOR (STARTING MOTOR) | |
| (INCLUDES INSULATOR TERMINALS & GROMMET) | ||||
| 12. | 8T-8569 | [1] | INSULATOR-TERMINAL | |
| 13. | 5S-7349 | [4] | BOLT (1/4-20X0.5-IN) | |
| 14. | 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 15. | 8H-1141 | [4] | SHOE-POLE | |
| 16. | 1H-2629 | [2] | STRIP-INSULATION | |
| 17. | 3R-8797 | [8] | SCREW & WASHER AS (3/8-24X0.72-IN) | |
| 18. | 7T-3276 | [1] | ARMATURE AS (24-VOLT) | |
| 19. | 7T-3973 | [1] | HOUSING AS-LEVER | |
| 20. | 4M-1831 | [1] | PLUG-LEVER HOUSING | |
| 21. | 7L-2894 | [1] | GASKET | |
| 22. | 0S-1597 | [5] | BOLT (1/4-28X1-IN) | |
| 23. | 184-6964 | [1] | DRIVE AS-MOTOR | |
| 24. | 7T-3974 | [1] | HOUSING AS-DRIVE | |
| 25. | 7X-3373 | [6] | BOLT (5/16-18X0.88-IN) | |
| 26. | 548-9596 | [1] | KIT-SOLENOID (24-VOLT) | |
| (INCLUDES BOLT, NUTS, COVER & CONNECTORS) | ||||
| 27. | 6V-8378 | [2] | NUT (10-32-THD) | |
| 28. | 8F-1434 | [2] | LOCKWASHER | |
| 29. | 8T-0328 | [2] | WASHER-HARD (5.5X10X1-MM THK) | |
| 30. | 9X-4824 | [1] | COVER-STARTING MOTOR | |
| AVAILABLE REPAIR KIT(S): | ||||
| 8T-9884 | [1] | KIT-INSULATOR (STARTING MOTOR) | ||
| (INCLUDES INSULATORS & BUSHING) | ||||
| 8C-3655 | [1] | KIT-BRUSH (STARTING MOTOR) | ||
| (INCLUDES BRUSH,SPRING,SCREW,SEAL & SCREW ASSEMBLY) | ||||
| 7T-3267 | [1] | KIT-BUSHING (STARTING MOTOR) | ||
| (INCLUDES BUSHINGS WICKS,CUPS SEALS,GASKET, | ||||
| SCREW ASSEMBLIES,WASHERS,SPACER & NUT) | ||||
| 7T-3268 | [1] | KIT-LEVER (STARTING MOTOR) | ||
| (INCLUDES LEVER ASSEMBLIES,SEALS,NUT,GASKET & RETAINER) | ||||
#SEBP32760256
174-0620: STARTING MOTOR GP-ELECTRIC
174-0620 STARTING MOTOR GP-ELECTRIC
S/N AXC1-535
24 VOLT
PART OF 180-3197 INSTALLATION AR-ENGINE
S/N AXC1-535
24 VOLT
PART OF 180-3197 INSTALLATION AR-ENGINE
Parts for your 972G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-2604 | [1] | CABLE AS | |
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 5P-0747 E | CABLE (00-GA, BLACK)(18 CM) | |||
| 2. | 4N-1059 | [1] | GASKET | |
| 3. | 165-4619 Y | [1] | STARTING MOTOR GP-ELECTRIC | |
| 4. | 6V-0371 | [3] | BOLT (5/8-11X1.375-IN) | |
| 5. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 6. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32760257
217-5214: STARTING MOTOR GP-ELECTRIC
217-5214 STARTING MOTOR GP-ELECTRIC
S/N AXC536-UP
24 VOLT. RH
PART OF 180-3197 INSTALLATION AR-ENGINE
S/N AXC536-UP
24 VOLT. RH
PART OF 180-3197 INSTALLATION AR-ENGINE
Parts for your 972G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-2604 | [1] | CABLE AS | |
| 2. | 9Y-6089 | [1] | GASKET | |
| 3. | 165-4619 Y | [1] | STARTING MOTOR GP-ELECTRIC | |
| 4. | 6V-0371 | [3] | BOLT (5/8-11X1.375-IN) | |
| 5. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 6. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32760258
164-7577: SWITCH GP-BYPASS
164-7577 SWITCH GP-BYPASS -POWER TRAIN OIL FILTER
S/N AXC1-UP
PART OF 180-3563 WIRING GP-CHASSIS
S/N AXC1-UP
PART OF 180-3563 WIRING GP-CHASSIS
Parts for your 972G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9X-1813 BE | SLEEVE | ||
| 2. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3. | 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 4. | 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | |
| 5. | 3D-2824 | [1] | SEAL-O-RING | |
| 6. | Z | [1] | SWITCH AS | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| Z | NOT SERVICED SEPARATELY | |||
#SEBP32760259
197-6475: SWITCH GP-DIMMER
197-6475 SWITCH GP-DIMMER -ROADING
S/N AXC1-UP
PART OF 197-0827, 212-1546 LIGHTING AR-ROADING
S/N AXC1-UP
PART OF 197-0827, 212-1546 LIGHTING AR-ROADING
Parts for your 972G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2H-1855 | [1] | SWITCH AS-FOOT (ROADING) | |
| 6V-8362 | [3] | SCREW-MACHINE (8-32X0.31-IN) | ||
| 9B-7233 | [3] | LOCKWASHER | ||
| 2. | 121-8039 | [1] | WIRE AS | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-5624 D | [1] | WIRE (14-GA, BLACK)(.6M) | ||
| 3. | 5S-7349 | [3] | BOLT (1/4-20X0.5-IN) | |
| 4. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| D | ORDER BY THE METER | |||
Information:
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
Tool Operating Manual
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Troubleshooting
CID 0261 FMI 13 Engine Timing Calibration required
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
Sensors and Electrical Connectors
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0320 FMI 02 Speed/Timing Sensor Loss of Signal
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0320 FMI 11 Speed/Timing Sensor mechanical failure
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0100 FMI 04 Engine Oil Pressure short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
CID 0174 FMI 03 Fuel Temperature open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
CID 0174 FMI 04 Fuel Temperature short to ground
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0273 FMI 04 Turbo Outlet Pressure short to ground
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0274 FMI 04 Atmospheric Pressure short to ground
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0041 FMI 04 8 Volt DC Supply short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Throttle Position Sensor Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Digital Sensor Supply Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
5 Volt Engine Pressure Sensor Supply Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0091 FMI 08 Throttle Position signal abnormal
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0094 FMI 03 Fuel Pressure open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0110 FMI 04 Engine Coolant Temperature short to ground
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
Engine Speed/Timing Sensor Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0600 FMI 03 Hydraulic Oil Temperature open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
CID 0600 FMI 04 Hydraulic Oil Temperature short to ground
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
CID 0041 FMI 03 8 Volt DC Supply short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0190 FMI 11 Engine Speed Sensor mechanical failure
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
5 Volt Engine Pressure Sensor Supply Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
Engine Temperature Sensor Open or Short Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Engine Speed/Timing Sensor - Calibrate
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Engine Temperature Sensor Open or Short Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
Engine Temperature Sensor Open or Short Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
5 Volt Engine Pressure Sensor Supply Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Throttle Position Sensor Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 1582 FMI 03 Trans Lube Oil Temp Sensor open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 1582 FMI 04 Trans Lube Oil Temp Sensor short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0342 FMI 02 Loss of Secondary Engine Speed signal
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Engine Speed/Timing Sensor Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3176C and 3196 Engines for Caterpillar Built Machines
3176C and 3196 Engines for Caterpillar Built Machines
CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Disassembly and Assembly
Engine Oil Pressure Sensor - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines
3176C and 3196 Engines For Caterpillar Built Machines
Coolant Temperature Sensor - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines
3176C and 3196 Engines For Caterpillar Built Machines
Crankshaft Position Sensor - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines
3176C and 3196 Engines For Caterpillar Built Machines
Service Magazine
Caterpillar Parts SIS Catalog 972G II :
Truck sale:
CATERPILLAR 972GII 2003
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
$76,739 USD
CATERPILLAR 972GII 2005
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
WESTRAC PTY. LTD.
- South Guildford - Western Australia
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
WESTRAC PTY. LTD.
- South Guildford - Western Australia




