AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

132-3203 PISTON & ROD GP S/N 3PD1-UP 16:1 RATIO PART OF 180-3191, 220-0794, 223-1553, 223-1556 ENGINE AR 966G II


BASIC ENGINE
PISTON & ROD GP
CYLINDER BLOCK GP
BELT TIGHTENER GP
VALVE MECHANISM GP
CRANKSHAFT GP
MOUNTING GP-ENGINE
VALVE MECHANISM GP
LUBRICATION SYSTEM
FILTER GP-ENGINE OIL

WHEEL LOADER 966G II WHEEL LOADER AWY
 966G II Wheel Loader AWY00001-UP (MACHINE) POWERED BY 3176 Engine SEBP3277 966G II AWY   (2001)

BASIC ENGINE

PISTON & ROD GP
PISTON & ROD GP
132-3203 PISTON & ROD GP
 

#SEBP32770070
 

132-3203: PISTON & ROD GP

132-3203 PISTON & ROD GP
S/N 3PD1-UP
16:1 RATIO
PART OF 180-3191, 220-0794, 223-1553, 223-1556 ENGINE AR
i01452441 SEBP3277
1323203 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-7098 [1] CROWN AS-PISTON  
2. 197-9335 [1] PIN AS  
2A. 6I-2720 [2] PLUG-PIN  
2B. 168-7276 [1] PIN-PISTON  
4. 217-0577 [1] BEARING-CONNECTING ROD  
  128-0390 AB BEARING-CONNECTING ROD (0.51-MM US)  
  128-0391 AB BEARING-CONNECTING ROD (0.76-MM US)  
5. 155-6629 [1] ROD AS-CONNECTING  
5A. 7W-5844 [1] BEARING  
5B. 219-4458 [2] PIN-DOWEL  
5C. 7C-8639 M [2] BOLT-CONNECTING ROD  
8. 4P-1659 [1] RING-PISTON (OIL)  
9. 238-2710 [1] SKIRT-PISTON  
10. 168-7212 [1] RING-PISTON (TOP)  
11. 109-5319 [1] RING-PISTON (INTERMEDIATE)  
12. 8T-0100 M [1] BOLT (M8X1.25X60-MM)  
13. 3E-4352 [1] WASHER-HARD (8.8X20.5X2.5-MM THK)  
14. 274-1587 [1] TUBE AS-OIL JET  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP32770071
 

200-6085: PLUG GP-ENGINE

200-6085 PLUG GP-ENGINE
S/N 3PD1-UP
PART OF 180-3191, 220-0794, 223-1553 ENGINE AR
i01462661 SEBP3277
2006085 PLUG GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-0623 [1] PLUG-CUP  
2. 8C-3445 [1] CAP-DUST  
3. 8C-3446 [1] VALVE-SAMPLING  
4. 3J-7354 [1] SEAL-O-RING  
5. 3K-0360 [2] SEAL-O-RING  
6. 5P-9617 [1] ADAPTER  
7. 6V-4589 [1] SEAL-O-RING  
8. 6V-5049 [4] SEAL-O-RING  
9. 9S-4191 [3] PLUG (9/16-18-THD)  
10. 9S-8006 [1] PLUG (7/8-14-THD)  
11. 9X-6650 [1] CONNECTOR-O-RING  
12. 9S-8005 [1] PLUG (3/4-16-THD)  
 

#SEBP32770072
 

200-6085: PLUG GP-ENGINE

200-6085 PLUG GP-ENGINE
S/N 3PD2923-UP
PART OF 180-3191, 223-1553, 223-1556 ENGINE AR
i01960744 SEBP3277
2006085 PLUG GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-0623 [1] PLUG-CUP  
2. 8C-3445 [1] CAP-DUST  
3. 8C-3446 [1] VALVE-SAMPLING (ENGINE OIL)  
4. 3J-7354 [1] SEAL-O-RING  
5. 148-8395 [1] PLUG AS  
  3K-0360 [1] SEAL-O-RING  
  9S-8005 [1] PLUG (3/4-16-THD)  
6. 5P-9617 [1] ADAPTER  
7. 201-4340 [2] PLUG AS  
    (EACH INCLUDES)
  6V-4589 [1] SEAL-O-RING  
  9S-8006 [1] PLUG (7/8-14-THD)  
8. 6V-5049 [4] SEAL-O-RING  
9. 9S-4191 [3] PLUG (9/16-18-THD)  
 

#SEBP32770073
 

185-7250: PULLEY GP-IDLER

185-7250 PULLEY GP-IDLER
S/N AWY1-UP
PART OF 180-3196 INSTALLATION AR-ENGINE
i01605079 SEBP3277
1857250 PULLEY GP-IDLER Parts scheme
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 151-0862 [1] PULLEY AS-IDLER  
1A. 6V-9027 [1] SEAL-O-RING  
1B. 124-7792 [1] PULLEY AS-IDLER (8-GROOVE)  
1C. 144-8122 M [1] BOLT-SPECIAL (M10X1.5X65-MM)  
1D. 144-8123 [1] SPACER-SPECIAL  
1E. 145-2901 [1] COVER-DUST  
2. 185-7251 [1] SUPPORT AS  
3. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
4. 8T-4908 M [4] BOLT (M8X1.25X25-MM)  
  M   METRIC PART
 

#SEBP32770074
 

115-9397: ROCKER ARM GP

115-9397 ROCKER ARM GP
S/N 3PD1-UP
PART OF 117-2749 VALVE MECHANISM GP
i00835210 SEBP3277
1159397 ROCKER ARM GP Parts scheme
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-9398 [2] ARM-VALVE ROCKER (EXHAUST)  
2. 115-9400 [2] ARM AS (UNIT INJECTION)  
    (EACH INCLUDES)
  2D-6642 [2] BALL  
  115-9402 [1] BEARING  
3. 115-9399 [2] ARM-VALVE ROCKER (INLET)  
4. 7C-1798 [2] SCREW-ARM ADJUSTMENT  
5. 245-6095 [2] NUT-HEX THIN (M12X1.5-THD)(CLASS 10, HEAT TREATED)  
6. 258-8721 [2] BUTTON  
7. 8L-2777 [2] SEAL-O-RING  
8. 115-9403 [2] SHAFT AS  
    (EACH INCLUDES)
9. 3S-6605 [1] PLUG-CUP  
10. 096-0014 [1] PIN-SPRING  
11. 185-4461 [2] SUPPORT AS  
    (EACH INCLUDES)
12. 180-1538 [2] DOWEL  
13. 183-4365 M [4] SCREW-ADJUSTMENT (M10X1.5-THD)  
14. 2Y-5829 M [4] NUT (M10X1.5-THD)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP32770075
 

116-1091: SEAL GP-CRANKSHAFT

116-1091 SEAL GP-CRANKSHAFT -REAR
S/N 3PD1-UP
PART OF 180-3191, 220-0794, 223-1553, 223-1556 ENGINE AR
i00827094 SEBP3277
1161091 SEAL GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 160-2323 [1] COVER  
2. 8T-0640 M [6] BOLT (M6X1X30-MM)  
3. 5P-0537 [13] WASHER-HARD (7.2X14.5X2-MM THK)  
4. 294-6007 [7] BOLT-HEAD LOCKING (M6X1X18-MM)  
5. 7C-1583 [1] GASKET  
6. 226-4757 [1] SEAL GP-CRANKSHAFT  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP32770076
 

183-5518: SUPPORT GP-ENGINE

183-5518 SUPPORT GP-ENGINE
S/N 3PD1-UP
PART OF 180-3191, 220-0794, 223-1553, 223-1556 ENGINE AR
i01462668 SEBP3277
1835518 SUPPORT GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 229-2887 [1] SUPPORT (FRONT)  
2. 292-3198 [8] WASHER-HARD (13.5X25.5X9-MM THK)  
3. 8T-0372 M [8] BOLT (M12X1.75X90-MM)  
  M   METRIC PART
 

#SEBP32770077
 

117-2749: VALVE MECHANISM GP

117-2749 VALVE MECHANISM GP
S/N 3PD1-UP
PART OF 180-3191, 220-0794, 223-1553, 223-1556 ENGINE AR
i01033979 SEBP3277
1172749 VALVE MECHANISM GP Parts scheme
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-8267 [4] WASHER (6.6X12X2-MM THK)  
2. 8T-0275 M [4] BOLT (M6X1X50-MM)  
3. 3E-4352 [8] WASHER-HARD (8.8X20.5X2.5-MM THK)  
4. 8T-0100 M [16] BOLT (M8X1.25X60-MM)  
5. 7C-8292 [8] ISOLATOR  
6. 9Y-7215 [8] SLEEVE-ISOLATOR  
7. 9Y-4357 [1] BREATHER AS (CRANKCASE)  
8. 9Y-1758 [1] GASKET (CRANKCASE BREATHER)  
9. 102-5842 [1] BASE-VALVE MECHANISM COVER  
10. 109-5309 [1] GASKET-VALVE COVER (VALVE COVER BASE)  
11. 115-9397 Y [3] ROCKER ARM GP  
12. 148-2063 Y [2] LIFTER GP-VALVE  
13. 341-8888 [12] PUSHROD-VALVE  
14. 341-8889 [6] PUSHROD-INJECTOR  
15. 9M-1974 [9] WASHER-HARD (8.8X16X2-MM THK)  
16. 6V-5217 M [1] BOLT (M8X1.25X20-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32770078
 

166-1329: BASE GP-OIL FILTER

166-1329 BASE GP-OIL FILTER -ENGINE
S/N 3PD1-UP
PART OF 117-2751 FILTER GP-ENGINE OIL
i01258576 SEBP3277
1661329 BASE GP-OIL FILTER Parts scheme
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-1974 [6] WASHER-HARD (8.8X16X2-MM THK)  
2. 166-1328 [1] BASE AS  
2A. 2P-4304 [1] STUD-HOLLOW  
2B. 3B-0623 [1] PLUG-CUP  
2C. 3P-1896 [2] PLUG-CUP  
2D. 7W-6390 [1] STUD-FILTER BASE  
3. 6V-4367 [3] SEAL-O-RING  
4. 6V-3940 M [3] BOLT (M8X1.25X25-MM)  
5. 7C-2891 [3] COVER  
6. 7C-3954 [1] SPRING AS  
6A. 2N-6005 SPRING  
7. 111-2645 [1] VALVE-PUMP BYPASS (ENGINE OIL FILTER)  
8. 6V-8359 M [1] BOLT (M6X1X70-MM)  
9. 7C-3083 [1] SEAT-RELIEF VALVE SPRING  
10. 7C-3082 [1] RETAINER  
11. 7C-3081 [1] SPACER (6.88X9.53X50-MM THK)  
12. 1A-2170 [1] SPRING-RETAINER  
13. 9M-0853 [2] PLUNGER-VALVE  
14. 288-3803 [2] SPRING AS  
    (EACH INCLUDES)
14A. 4N-8150 SPRING  
15. 9S-4185 [1] PLUG (3/4-16-THD)  
16. 8L-2786 [1] SEAL-O-RING  
17. 9X-2097 M [3] STUD (M8X1.25-THD)  
  M   METRIC PART
 

#SEBP32770079
 

166-1329: BASE GP-OIL FILTER

166-1329 BASE GP-OIL FILTER -ENGINE
S/N 3PD1-UP
PART OF 117-2751 FILTER GP-ENGINE OIL
i05044034 SEBP3277
1661329 BASE GP-OIL FILTER Parts scheme
  For full view, you need register

Parts for your 966G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-1974 [6] WASHER-HARD (8.8X16X2-MM THK)  
2. 166-1328 [1] BASE AS  
2A. 2P-4304 [1] STUD-HOLLOW  
2B. 3B-0623 [1] PLUG-CUP  
2C. 3P-1896 [2] PLUG-CUP  
2D. 7W-6390 [1] STUD-FILTER BASE  
3. 6V-4367 [3] SEAL-O-RING  
4. 6V-3940 M [3] BOLT (M8X1.25X25-MM)  
5. 7C-2891 [3] COVER  
6. 7C-3954 [1] SPRING AS  
6A. 2N-6005 [1] SPRING  
7. 111-2645 [1] VALVE-PUMP BYPASS (ENGINE OIL FILTER)  
8. 6V-8359 M [1] BOLT (M6X1X70-MM)  
9. 7C-3083 [1] SEAT-RELIEF VALVE SPRING  
10. 7C-3082 [1] RETAINER  
11. 7C-3081 [1] SPACER (6.88X9.53X50-MM THK)  
12. 1A-2170 [1] SPRING-RETAINER  
13. 392-9208 C [2] PLUNGER-VALVE (RELIEF)  
14. 288-3803 [2] SPRING AS  
    (EACH INCLUDES)
14A. 4N-8150 [1] SPRING  
15. 398-5596 C [1] PLUG AS  
  238-5080 [1] SEAL-O-RING  
  360-3680 [1] PLUG  
17. 9X-2097 M [3] STUD (M8X1.25-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

Information:

Special Instruction
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Testing and Adjusting
Engine Crankcase Pressure (Blowby) - Test
3176C and 3196 Engines for Caterpillar Built Machines
Compression - Test
3176C and 3196 Engines for Caterpillar Built Machines
Piston Ring Groove - Inspect
3176C and 3196 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Inspect
3176C and 3196 Engines for Caterpillar Built Machines
Cylinder Liner Projection - Inspect
3176C and 3196 Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
3176C and 3196 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
3176C and 3196 Engines For Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines
Pistons and Connecting Rods - Remove
3176C and 3196 Engines For Caterpillar Built Machines
Pistons and Connecting Rods - Install
3176C and 3196 Engines For Caterpillar Built Machines
Pistons and Connecting Rods - Disassemble
3176C and 3196 Engines For Caterpillar Built Machines
Connecting Rod Bearings - Remove
3176C and 3196 Engines For Caterpillar Built Machines
Connecting Rod Bearings - Install
3176C and 3196 Engines For Caterpillar Built Machines
Pistons and Connecting Rods - Assemble
3176C and 3196 Engines For Caterpillar Built Machines
Service Magazine
Connecting Rods with Dual Bearing Tab Slots are OK to Use {1218}
2002/11/04
New Guidelines for Inspecting Pistons {1214}
2006/01/02

Caterpillar Parts SIS Catalog 966G II :

PANEL GP-SOUND SUPPRESSION
197-9561 PANEL GP-SOUND SUPPRESSION
PAN GP-OIL
183-1258 PAN GP-OIL
PAN GP-OIL
183-1258 PAN GP-OIL
PAN GP-OIL
183-1258 PAN GP-OIL
MOUNTING GP-VALVE MECHANISM
116-5408 MOUNTING GP-VALVE MECHANISM
MOUNTING GP-FAN DRIVE
138-2550 MOUNTING GP-FAN DRIVE
MOUNTING GP-ENGINE & XMSN
185-5298 MOUNTING GP-ENGINE & XMSN
MOUNTING GP-ALTERNATOR
232-7374 MOUNTING GP-ALTERNATOR
PLUG GP-ENGINE
200-6085 PLUG GP-ENGINE
PLUG GP-ENGINE
200-6085 PLUG GP-ENGINE
PULLEY GP-IDLER
185-7250 PULLEY GP-IDLER
ROCKER ARM GP
115-9397 ROCKER ARM GP
SEAL GP-CRANKSHAFT
116-1091 SEAL GP-CRANKSHAFT
SUPPORT GP-ENGINE
183-5518 SUPPORT GP-ENGINE
VALVE MECHANISM GP
117-2749 VALVE MECHANISM GP
BASE GP-OIL FILTER
166-1329 BASE GP-OIL FILTER

Truck sale:

Caterpillar 966GII, Construction
64,000 USD 
Caterpillar 966GII, Construction
- Wheel Loaders
H.O. PENN MACHINERY CO., INC.
Caterpillar 966GII, Construction
 
Caterpillar 966GII, Construction
- Wheel Loaders
NMC
Caterpillar 966GII, Construction
55,000 
Caterpillar 966GII, Construction
- Wheel Loaders
NMC
Caterpillar 966GII, Construction
75,800 
Caterpillar 966GII, Construction
- Wheel Loaders
EMPIRE MACHINERY
Caterpillar 966GII, Construction
73,750 
Caterpillar 966GII, Construction
- Wheel Loaders
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.