OPERATOR STATION
CONTROL GP-HANDLECONTROL GP-JOYSTICK
MONITOR GP
OPERATOR STATION
CONTROL GP-HANDLE
#SEBP32770730
206-7419: CONTROL GP-HANDLE
206-7419 CONTROL GP-HANDLE -LIFT, TILT, AUTODIG
S/N AWY760-UP
PART OF 220-6102 CONTROL GP-JOYSTICK
S/N AWY760-UP
PART OF 220-6102 CONTROL GP-JOYSTICK
For full view, you need register
Parts for your 966G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 175-4170 | [2] | SCREW-PAN HEAD (6-19X1.625-IN) | |
| 2. | 9B-1117 | [2] | LOCKWASHER | |
| 3. | 6V-1668 | [1] | WASHER (6.5X29.1X3-MM THK) | |
| 4. | Z | [1] | SWITCH AS-PUSH BUTTON (HORN) | |
| 4A. | Z | [1] | SWITCH AS-PUSH BUTTON (AUTODIG) | |
| 5. | 144-0331 | [2] | CAP-PUSH BUTTON (YELLOW) | |
| 6. | 218-7136 B | SLEEVE (36-CM) | ||
| 7. | 6V-1614 | [1] | TUBE-HEAT SHRINK (9.52-MM DIA) | |
| 8. | 208-6081 | [1] | SLEEVE | |
| B | USE AS REQUIRED | |||
| Z | NOT SERVICED SEPARATELY | |||
#SEBP32770731
230-9072: CONTROL GP-HANDLE
230-9072 CONTROL GP-HANDLE -LIFT, TILT, AUXILIARY, AUTODIG
S/N AWY760-UP
PART OF 208-6060 CONTROL GP-JOYSTICK
S/N AWY760-UP
PART OF 208-6060 CONTROL GP-JOYSTICK
For full view, you need register
Parts for your 966G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | Z | [1] | HANDLE AS | |
| 2. | 144-0331 | [2] | CAP-PUSH BUTTON (YELLOW) | |
| 3. | 434-3203 | [1] | HOUSING GP-LEVER | |
| 3A. | Z | [1] | SWITCH AS-PUSH BUTTON (AUTODIG) | |
| 3B. | Z | [1] | SWITCH AS-PUSH BUTTON (HORN) | |
| 4. | 9B-1117 | [2] | LOCKWASHER | |
| 5. | 175-4170 | [2] | SCREW-PAN HEAD (6-19X1.625-IN) | |
| 6. | 208-6081 | [1] | SLEEVE | |
| 7. | 218-7136 E | SLEEVE (36-CM) | ||
| 8. | 6V-1614 D | TUBE-HEAT SHRINK (9.52-MM DIA)(0.5-M EACH) | ||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| Z | NOT SERVICED SEPARATELY | |||
#SEBP32770732
446-4917: CONTROL GP-HANDLE
446-4917 CONTROL GP-HANDLE
S/N AWY1-UP
WITHOUT TRIGGER
FIELD REPLACEMENT FOR @@@@@206-7417@@@@@
S/N AWY1-UP
WITHOUT TRIGGER
FIELD REPLACEMENT FOR @@@@@206-7417@@@@@
For full view, you need register
Parts for your 966G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 144-0331 | [1] | CAP-PUSH BUTTON (YELLOW) | |
| 2. | 208-6081 | [1] | SLEEVE | |
| 3. | 6V-1614 D | TUBE-HEAT SHRINK (9.52-MM DIA)(0.1-M EACH) | ||
| 4. | 434-3206 | [1] | CONTROL GP-SWITCH | |
| 5. | 175-4170 | [2] | SCREW-PAN HEAD (6-19X1.625-IN) | |
| 6. | 9B-1117 | [2] | LOCKWASHER | |
| 7. | 218-7136 E | SLEEVE (36-CM) | ||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP32770733
208-6060: CONTROL GP-JOYSTICK
208-6060 CONTROL GP-JOYSTICK -3-FUNCTION WITH AUTODIG
S/N AWY760-UP
PART OF 233-0209 CONTROL GP-ELECTROHYDRAULIC
S/N AWY760-UP
PART OF 233-0209 CONTROL GP-ELECTROHYDRAULIC
For full view, you need register
Parts for your 966G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 193-4476 M | [8] | SCREW-PAN HEAD (M4X0.7X35-MM) | |
| 3. | 228-0850 | [2] | DETENT GP-CONTROL (JOYSTICK, LIFT, TILT) | |
| 107-1964 | [4] | SCREW-PAN HEAD (6-19X0.5-IN) | ||
| 033-9139 | [1] | RING-RETAINING | ||
| 4. | 230-9072 Y | [1] | CONTROL GP-HANDLE (LIFT, TILT, AUXILIARY, AUTODIG) | |
| 5. | 151-4977 | [12] | WASHER (4.445X9.525X1.092-MM THK) | |
| 6. | 175-3265 | [1] | SCREW (8-16X0.63-IN) | |
| 7. | 192-4658 M | [4] | SCREW-PAN HEAD (M4X0.7X20-MM) | |
| 8. | 257-2531 | [1] | SENSOR GP-POSITION (LIFT) | |
| 9. | 257-2532 | [1] | SENSOR-POSITION (TILT) | |
| 10. | 2K-4898 | [1] | CLAMP-TUBE | |
| 11. | 4B-9808 | [2] | SETSCREW (1/4-20X0.5-IN) | |
| 12. | 186-3735 | [11] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 13. | 8T-8737 | [1] | PLUG-SEAL | |
| 15. | 174-3091 | [1] | KIT-RECEPTACLE (12-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 16. | 208-6081 | [1] | SLEEVE | |
| 17. | 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 18. | 175-1529 | [1] | BOOT | |
| 19. | 178-5077 | [1] | PLATE | |
| 20. | [4] | SCREW-FLAT HEAD | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32770734
220-6102: CONTROL GP-JOYSTICK
220-6102 CONTROL GP-JOYSTICK -2-FUNCTION WITH AUTODIG
S/N AWY760-1389
PART OF 233-0208 CONTROL GP-ELECTROHYDRAULIC
S/N AWY760-1389
PART OF 233-0208 CONTROL GP-ELECTROHYDRAULIC
For full view, you need register
Parts for your 966G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 193-4476 M | [8] | SCREW-PAN HEAD (M4X0.7X35-MM) | |
| 2. | 175-1529 | [1] | BOOT | |
| 178-5077 | [1] | PLATE | ||
| 205-2941 | [4] | SCREW-SPECIAL (SELF LOCKING) | ||
| 3. | 206-7419 Y | [1] | CONTROL GP-HANDLE (LIFT, TILT, AUTODIG) | |
| 4. | 228-0850 | [2] | DETENT GP-CONTROL (JOYSTICK, LIFT, TILT) | |
| 5. | 151-4977 | [12] | WASHER (4.445X9.525X1.092-MM THK) | |
| 6. | 175-3265 | [1] | SCREW (8-16X0.63-IN) | |
| 7. | 192-4658 M | [4] | SCREW-PAN HEAD (M4X0.7X20-MM) | |
| 8. | 230-6268 | [1] | SENSOR GP-POSITION (LIFT) | |
| 9. | 230-6269 | [1] | SENSOR GP-POSITION (TILT) | |
| 10. | 2K-4898 | [1] | CLAMP-TUBE | |
| 11. | 4B-9808 | [2] | SETSCREW (1/4-20X0.5-IN) | |
| 12. | 186-3735 | [1] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 13. | 8T-8737 | [1] | PLUG-SEAL | |
| 14. | 3E-5180 | [1] | WEDGE-RECEPTACLE LOCK (12-PIN) | |
| 15. | 174-3091 | [1] | KIT-RECEPTACLE (12-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32770735
220-6102: CONTROL GP-JOYSTICK
220-6102 CONTROL GP-JOYSTICK -2-FUNCTION WITH AUTODIG
S/N AWY1390-UP
PART OF 233-0208 CONTROL GP-ELECTROHYDRAULIC
S/N AWY1390-UP
PART OF 233-0208 CONTROL GP-ELECTROHYDRAULIC
For full view, you need register
Parts for your 966G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 193-4476 M | [8] | SCREW-PAN HEAD (M4X0.7X35-MM) | |
| 3. | 206-7419 Y | [1] | CONTROL GP-HANDLE (LIFT, TILT, AUTODIG) | |
| 4. | 228-0850 | [2] | DETENT GP-CONTROL (JOYSTICK, LIFT, TILT) | |
| (EACH INCLUDES) | ||||
| 033-9139 | [1] | RING-RETAINING | ||
| 107-1964 | [4] | SCREW-PAN HEAD (6-19X0.5-IN) | ||
| 5. | 151-4977 | [12] | WASHER (4.445X9.525X1.092-MM THK) | |
| 6. | 175-3265 | [1] | SCREW (8-16X0.63-IN) | |
| 7. | 192-4658 M | [4] | SCREW-PAN HEAD (M4X0.7X20-MM) | |
| 8. | 257-2531 C | [1] | SENSOR GP-POSITION (LIFT) | |
| 9. | 257-2532 C | [1] | SENSOR-POSITION (TILT) | |
| 10. | 2K-4898 | [1] | CLAMP-TUBE | |
| 11. | 4B-9808 | [2] | SETSCREW (1/4-20X0.5-IN) | |
| 12. | 186-3735 | [11] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 13. | 8T-8737 | [1] | PLUG-SEAL | |
| 15. | 174-3091 | [1] | KIT-RECEPTACLE (12-PIN) | |
| 16. | 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | |
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 17. | 175-1529 | [1] | BOOT | |
| 18. | 178-5077 | [1] | PLATE | |
| 19. | 205-2941 | [4] | SCREW-SPECIAL (SELF LOCKING) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32770736
226-8664: CONTROL GP-JOYSTICK
226-8664 CONTROL GP-JOYSTICK -2-FUNCTION
S/N AWY760-1389
PART OF 213-6015 CONTROL GP-ELECTROHYDRAULIC
S/N AWY760-1389
PART OF 213-6015 CONTROL GP-ELECTROHYDRAULIC
For full view, you need register
Parts for your 966G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 193-4476 M | [8] | SCREW-PAN HEAD (M4X0.7X35-MM) | |
| 2. | Z | [1] | BASE AS | |
| 3. | 206-7418 | [1] | CONTROL GP-HANDLE (LIFT, TILT) | |
| 6V-1614 D | TUBE-HEAT SHRINK (9.52-MM DIA)(1-M) | |||
| 144-0331 | [1] | CAP-PUSH BUTTON (YELLOW) | ||
| 208-6081 | [1] | SLEEVE | ||
| 218-7136 E | SLEEVE (36-CM) | |||
| 4. | 228-0850 | [2] | DETENT GP-CONTROL (JOYSTICK, LIFT, TILT) | |
| 5. | 151-4977 | [12] | WASHER (4.445X9.525X1.092-MM THK) | |
| 6. | 175-3265 | [1] | SCREW (8-16X0.63-IN) | |
| 7. | 192-4658 M | [4] | SCREW-PAN HEAD (M4X0.7X20-MM) | |
| 8. | 230-6268 | [1] | SENSOR GP-POSITION (LIFT) | |
| 9. | 230-6269 | [1] | SENSOR GP-POSITION (TILT) | |
| 10. | 2K-4898 | [1] | CLAMP-TUBE | |
| 11. | 4B-9808 | [2] | SETSCREW (1/4-20X0.5-IN) | |
| 12. | 186-3735 | [11] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 13. | 8T-8737 | [1] | PLUG-SEAL | |
| 14. | 3E-5180 | [1] | WEDGE-RECEPTACLE LOCK (12-PIN) | |
| 15. | 174-3091 | [1] | KIT-RECEPTACLE (12-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 16. | 208-6081 | [1] | SLEEVE | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Z | NOT SERVICED SEPARATELY | |||
#SEBP32770737
226-8664: CONTROL GP-JOYSTICK
226-8664 CONTROL GP-JOYSTICK -2-FUNCTION
S/N AWY1390-UP
PART OF 213-6015 CONTROL GP-ELECTROHYDRAULIC
S/N AWY1390-UP
PART OF 213-6015 CONTROL GP-ELECTROHYDRAULIC
For full view, you need register
Parts for your 966G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 193-4476 M | [8] | SCREW-PAN HEAD (M4X0.7X35-MM) | |
| 3. | 206-7418 | [1] | CONTROL GP-HANDLE (LIFT, TILT) | |
| 144-0331 | [1] | CAP-PUSH BUTTON (YELLOW) | ||
| 208-6081 | [1] | SLEEVE | ||
| 218-7136 E | SLEEVE (36-CM) | |||
| 4. | 228-0850 | [2] | DETENT GP-CONTROL (JOYSTICK, LIFT, TILT) | |
| 5. | 257-2531 | [1] | SENSOR GP-POSITION (LIFT) | |
| 6. | 257-2532 | [1] | SENSOR-POSITION (TILT) | |
| 7. | 151-4977 | [12] | WASHER (4.445X9.525X1.092-MM THK) | |
| 8. | 175-3265 | [1] | SCREW (8-16X0.63-IN) | |
| 9. | 192-4658 M | [4] | SCREW-PAN HEAD (M4X0.7X20-MM) | |
| 10. | 2K-4898 | [1] | CLAMP-TUBE | |
| 11. | 4B-9808 | [2] | SETSCREW (1/4-20X0.5-IN) | |
| 12. | 186-3735 | [11] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 13. | 8T-8737 | [1] | PLUG-SEAL | |
| 14. | 174-3091 | [1] | KIT-RECEPTACLE (12-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 15. | 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | |
| (KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 16. | 208-6081 | [1] | SLEEVE | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP32770738
226-8665: CONTROL GP-JOYSTICK
226-8665 CONTROL GP-JOYSTICK -3-FUNCTION
S/N AWY760-UP
PART OF 218-3833 CONTROL GP-ELECTROHYDRAULIC
S/N AWY760-UP
PART OF 218-3833 CONTROL GP-ELECTROHYDRAULIC
For full view, you need register
Parts for your 966G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-8737 | [1] | PLUG-SEAL | |
| 2. | 193-4476 M | [8] | SCREW-PAN HEAD (M4X0.7X35-MM) | |
| 4. | 206-7417 Y | [1] | CONTROL GP-HANDLE (LIFT, TILT, AUXILIARY) | |
| 5. | 228-0850 | [2] | DETENT GP-CONTROL (JOYSTICK, LIFT, TILT) | |
| 6. | 257-2531 | [1] | SENSOR GP-POSITION (LIFT) | |
| 7. | 257-2532 | [1] | SENSOR-POSITION (TILT) | |
| 8. | 151-4977 | [12] | WASHER (4.445X9.525X1.092-MM THK) | |
| 9. | 175-3265 | [1] | SCREW (8-16X0.63-IN) | |
| 10. | 192-4658 M | [4] | SCREW-PAN HEAD (M4X0.7X20-MM) | |
| 11. | 2K-4898 | [1] | CLAMP-TUBE | |
| 12. | 4B-9808 | [2] | SETSCREW (1/4-20X0.5-IN) | |
| 13. | 186-3735 | [11] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 14. | 174-3091 | [1] | KIT-RECEPTACLE (12-PIN) | |
| (INCLUDES RECEPTACLE ASSEMBLY & WEDGE) | ||||
| 15. | 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | |
| (KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 16. | 208-6081 | [1] | SLEEVE | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32770739
103-5526: CONTROL GP-MONITOR
103-5526 CONTROL GP-MONITOR -DIMMER
S/N AWY1-UP
PART OF 195-6255, 207-8617 WIRING GP-CAB
S/N AWY1-UP
PART OF 195-6255, 207-8617 WIRING GP-CAB
For full view, you need register
