AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

163-0872 COMPRESSOR GP-REFRIGERANT S/N AXN1-UP PART OF 185-5876, 220-1860, 232-7376 COMPRESSOR GP-REFRIGERANT 972G II


OPERATOR STATION
AIR CONDITIONER GP
CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-HANDLE
MONITOR GP

WHEEL LOADER 972G II WHEEL LOADER AXN
 972G II Wheel Loader AXN00001-UP (MACHINE) POWERED BY 3196 Engine SEBP3278 972G II AXN   (1999)

OPERATOR STATION

AIR CONDITIONER GP
AIR CONDITIONER GP
190-1249 AIR CONDITIONER GP
AIR CONDITIONER GP
276-3965 AIR CONDITIONER GP
COMPRESSOR GP-REFRIGERANT
163-0872 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
185-5876 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
220-1860 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
232-7376 COMPRESSOR GP-REFRIGERANT
 

#SEBP32780740
 

163-0872: COMPRESSOR GP-REFRIGERANT

163-0872 COMPRESSOR GP-REFRIGERANT
S/N AXN1-UP
PART OF 185-5876, 220-1860, 232-7376 COMPRESSOR GP-REFRIGERANT
i01449139 SEBP3278
1630872 COMPRESSOR GP-REFRIGERANT Parts scheme
  For full view, you need register

Parts for your 972G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 314-4018 [1] VALVE AS-PRESSURE RELIEF (REFRIGERANT COMPRESSOR)  
3. 7T-4532 [1] PLUG AS  
4. 9X-7385 [2] SEAL-O-RING  
5. 4C-2959 B OIL-AIR CONDITIONER  
6. 9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  B   USE AS REQUIRED
 

#SEBP32780741
 

185-5876: COMPRESSOR GP-REFRIGERANT

185-5876 COMPRESSOR GP-REFRIGERANT
S/N AXN1-253
PART OF 184-4921 AIR CONDITIONER AR
i01449148 SEBP3278
1855876 COMPRESSOR GP-REFRIGERANT Parts scheme
  For full view, you need register

Parts for your 972G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 163-0872 Y [1] COMPRESSOR GP-REFRIGERANT  
2. 7X-2538 M [4] BOLT (M8X1.25X100-MM)  
3. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32780742
 

220-1860: COMPRESSOR GP-REFRIGERANT

220-1860 COMPRESSOR GP-REFRIGERANT
S/N AXN254-348
PART OF 184-4921 AIR CONDITIONER AR
i01832954 SEBP3278
2201860 COMPRESSOR GP-REFRIGERANT Parts scheme
  For full view, you need register

Parts for your 972G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-7023 [2] PULLEY AS-IDLER  
    (EACH INCLUDES)
  151-2898 [1] SPACER (10.4X38.1X20-MM THK)  
  151-2900 M [1] BOLT (M10X1.5X54.25-MM)  
  166-6358 [1] COVER-DUST  
2. 163-0872 Y [1] COMPRESSOR GP-REFRIGERANT  
3. 219-9456 [1] BRACKET  
4. 220-1858 [1] BELT-SERPENTINE  
6. 7X-2538 M [4] BOLT (M8X1.25X100-MM)  
7. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
8. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
9. 8T-4176 M [1] BOLT (M12X1.75X90-MM)  
10. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
11. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
12. 8T-4244 M [1] NUT (M12X1.75-THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32780743
 

232-7376: COMPRESSOR GP-REFRIGERANT

232-7376 COMPRESSOR GP-REFRIGERANT
S/N AXN349-UP
PART OF 184-4921 AIR CONDITIONER AR
i02010942 SEBP3278
2327376 COMPRESSOR GP-REFRIGERANT Parts scheme
  For full view, you need register

Parts for your 972G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 163-0872 Y [1] COMPRESSOR GP-REFRIGERANT  
2. 197-9641 [2] PULLEY AS-IDLER  
3. 219-9456 [1] BRACKET  
4. 260-6106 [1] BELT-SERPENTINE  
5. 6D-4244 [1] CLIP (LOOP)  
6. 7X-2538 M [4] BOLT (M8X1.25X100-MM)  
7. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
8. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
9. 8T-4176 M [1] BOLT (M12X1.75X90-MM)  
10. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
11. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
12. 8T-4244 M [1] NUT (M12X1.75-THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32780744
 

180-8686: CONDENSER & MTG GP-REFRIGERANT

180-8686 CONDENSER & MTG GP-REFRIGERANT
S/N AXN1-UP
PART OF 184-4921 AIR CONDITIONER AR
i01449141 SEBP3278
1808686 CONDENSER & MTG GP-REFRIGERANT Parts scheme
  For full view, you need register

Parts for your 972G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4E-1384 [1] BUMPER-CONICAL  
2. 6N-8744 [4] MOUNT  
3. 7X-0632 [2] WASHER-HARD (11X36X6-MM THK)  
4. 186-6555 [1] BRACKET  
5. 200-2970 [1] CORE AS  
6. 5C-7261 M [1] NUT (M8X1.25-THD)  
7. 8T-4123 [4] WASHER (3.62X5.75X0.375-MM THK)  
8. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
9. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
10. 8T-4222 [6] WASHER-PLATED (11X32X2.5-MM THK)  
11. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
 

#SEBP32780745
 

250-3194: CONTROL GP-ELECTROHYDRAULIC

250-3194 CONTROL GP-ELECTROHYDRAULIC -2-FUNCTION
S/N AXN1-UP
PART OF 250-3733 CAB AR
i02105249 SEBP3278
2503194 CONTROL GP-ELECTROHYDRAULIC Parts scheme 2503194 CONTROL GP-ELECTROHYDRAULIC Parts scheme 2503194 CONTROL GP-ELECTROHYDRAULIC Parts scheme
  For full view, you need register

Parts for your 972G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
2. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
3. 3S-2093 [2] STRAP-CABLE  
4. 5C-2874 M [4] NUT (M5X0.8-THD)  
5. 5P-6120 D TRIM-EDGE (0.1-M)  
6. 8L-8413 [2] STRAP-CABLE (WHITE)  
7. 8R-3695 [1] GROMMET  
8. 8T-0328 [4] WASHER-HARD (5.5X10X1-MM THK)  
9. 105-3372 [1] SPRING  
10. 106-1582 [1] HOUSING  
11. 106-1583 [2] ROD  
12. 106-1584 [2] SPACER (6.22X9.52X85-MM THK)  
13. 114-4247 [4] BRACKET AS  
14. 139-1378 [4] BEARING  
15. 140-5945 [1] FILM-IDENTIFICATION (HORN)  
16. 149-3949 [2] LEVER-CONTROL  
17. 163-8119 [2] SPRING  
18. 170-1821 [1] SWITCH AS-PUSH BUTTON (HORN)  
  6F-0253 [1] LOCKWASHER  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  172-3511 [1] NUT (5/8-24-THD)  
19. 175-2209 [1] SWITCH AS-PUSH BUTTON (TRANSMISSION DOWNSHIFT)  
  102-8803 [2] KIT-RECEPTACLE (3-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
  6F-0253 [1] LOCKWASHER  
  172-3511 [1] NUT (5/8-24-THD)  
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
20. 188-0955 [3] COIL AS-DETENT (CONTROL LEVER)  
    (EACH INCLUDES)
  1S-9593 [2] STRAP-CABLE  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
21. 189-2077 [1] FILM-IDENTIFICATION (LIFT, FLOAT, LOWER)  
22. 189-2078 [1] FILM-IDENTIFICATION (DUMP, TILT BACK)  
23. 189-2079 [1] FILM-INSTRUCTION (MAINTENANCE)  
24. 207-7447 [2] PLATE  
25. 208-3916 [1] BRACKET  
26. 208-3917 [1] BRACKET  
27. 208-3918 [1] PLATE  
28. 208-8333 [2] COVER  
29. 209-9250 [1] BRACKET AS  
  6V-9632 M [5] NUT-WELD (M6X1-THD)  
30. 214-4862 Y [2] SENSOR GP-POSITION (CONTROL LEVER)  
31. 218-3806 [2] SPACER (8.2X18X12-MM THK)  
32. 246-2642 [1] SWITCH AS-ROCKER (FORWARD, NEUTRAL, REVERSE)(FORWARD, NEUTRAL, REVERSE)  
33. 247-4184 [1] FILM-IDENTIFICATION (DOWNSHIFT SWITCH)  
34. 250-3806 [1] PLATE  
35. 250-3808 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
36. 259-3979 [1] COVER  
37. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
38. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
39. 3E-8020 M [2] SCREW-TRUSS HEAD (M6X1X25-MM)  
40. 5C-2890 M [1] NUT (M6X1-THD)  
41. 5P-8523 [1] GROMMET  
42. 5P-8524 [1] GROMMET  
43. 6V-7743 M [4] LOCKNUT (M6X1-THD)  
44. 8M-2771 [2] CLIP  
45. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
46. 8T-4970 M [10] BOLT (M6X1X14-MM)  
47. 8T-4971 M [4] BOLT (M6X1X30-MM)  
48. 9X-2026 [9] WASHER (6.5X17X1-MM THK)  
49. 9X-2042 M [1] SCREW-TRUSS HEAD (M6X1X12-MM)  
50. 9X-2044 M [4] SCREW-TRUSS HEAD (M6X1X16-MM)  
51. 6V-9335 D SEAL (0.2-M)  
52. 090-4808 J SEAL (6-DM)  
  D   ORDER BY THE METER
  J   ORDER BY THE DECIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32780746
 

251-0692: CONTROL GP-ELECTROHYDRAULIC

251-0692 CONTROL GP-ELECTROHYDRAULIC -3-FUNCTION
S/N AXN1-UP
PART OF 251-1933 HYDRAULIC AR-3 VALVE
i02106527 SEBP3278
2510692 CONTROL GP-ELECTROHYDRAULIC Parts scheme 2510692 CONTROL GP-ELECTROHYDRAULIC Parts scheme
  For full view, you need register

Parts for your 972G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-6120 D TRIM-EDGE (0.1-M)  
2. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
3. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
4. 3S-2093 [3] STRAP-CABLE  
5. 5C-2874 M [4] NUT (M5X0.8-THD)  
6. 8L-8413 [3] STRAP-CABLE (WHITE)  
7. 8R-3695 [1] GROMMET  
8. 8T-0328 [6] WASHER-HARD (5.5X10X1-MM THK)  
9. 9T-4735 [1] SPRING  
10. 105-2976 [3] FLANGE  
11. 105-3372 [1] SPRING  
12. 106-1582 [1] HOUSING  
13. 106-1584 [2] SPACER (6.22X9.52X85-MM THK)  
14. 114-4247 [4] BRACKET AS  
15. 114-8165 [2] ROD  
16. 139-1378 [6] BEARING  
17. 140-5945 [1] FILM-IDENTIFICATION (HORN)  
18. 149-3949 [3] LEVER-CONTROL  
19. 150-6287 [2] SPACER (6.22X9.52X31-MM THK)  
20. 163-8119 [3] SPRING  
21. 170-1821 [1] SWITCH AS-PUSH BUTTON (HORN)  
  6F-0253 [1] LOCKWASHER  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  172-3511 [1] NUT (5/8-24-THD)  
22. 175-2209 [1] SWITCH AS-PUSH BUTTON (TRANSMISSION DOWNSHIFT)  
  6F-0253 [1] LOCKWASHER  
  102-8803 [2] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  172-3511 [1] NUT (5/8-24-THD)  
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
23. 188-0955 [3] COIL AS-DETENT  
    (EACH INCLUDES)
  1S-9593 [2] STRAP-CABLE  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
24. 189-2077 [1] FILM-IDENTIFICATION (LIFT, FLOAT, LOWER)  
25. 189-2078 [1] FILM-IDENTIFICATION (DUMP, TILT BACK)  
26. 189-2079 [1] FILM-INSTRUCTION (MAINTENANCE)  
27. 201-5563 [1] FILM-IDENTIFICATION (AUXILIARY HYDRAULIC)  
28. 207-7447 [2] PLATE  
29. 208-2479 [2] SPACER (10X13.1X5.5-MM THK)  
30. 208-8333 [3] COVER  
31. 210-6782 [1] COVER  
32. 211-7710 [1] COVER AS  
33. 211-8285 [1] PLATE  
34. 214-4862 Y [3] SENSOR GP-POSITION (CONTROL LEVER)  
35. 238-2772 [1] PLATE AS  
  6T-5600 [4] BOSS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  105-2797 [1] BOSS  
36. 246-2642 [1] SWITCH AS-ROCKER (FORWARD, NEUTRAL, REVERSE)  
37. 247-4184 [1] FILM-IDENTIFICATION (DOWNSHIFT SWITCH)  
38. 259-3982 [1] COVER  
39. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
40. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
41. 5C-2890 M [1] NUT (M6X1-THD)  
42. 5F-9757 [2] GROMMET  
43. 5P-8523 [1] GROMMET  
44. 5P-8524 [1] GROMMET  
45. 6V-7743 M [4] LOCKNUT (M6X1-THD)  
46. 7X-2533 M [3] BOLT (M6X1X35-MM)  
47. 7X-2619 M [1] BOLT (M6X1X10-MM)  
48. 8C-8451 M [1] BOLT (M6X1X40-MM)  
49. 8M-2771 [2] CLIP  
50. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
51. 8T-4970 M [10] BOLT (M6X1X14-MM)  
52. 9X-2026 [8] WASHER (6.5X17X1-MM THK)  
53. 9X-2043 M [3] SCREW-TRUSS HEAD (M6X1X14-MM)  
54. 9X-2044 M [3] SCREW-TRUSS HEAD (M6X1X16-MM)  
55. 8T-3392 D SEAL (0.07-M EACH)  
55A. 8T-3392 D SEAL (0.16-M)  
56. 6V-9335 D SEAL (0.5-M)  
56A. 6V-9335 D SEAL (0.16-M)  
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32780747
 

211-3118: CONTROL GP-HANDLE

211-3118 CONTROL GP-HANDLE -DIRECTION, DOWNSHIFT
S/N AXN1-253
i01617064 SEBP3278
2113118 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your 972G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 150-1293 M [2] SCREW-BUTTON HEAD (M4X0.7X12-MM)  
2. 145-0877 [1] HANDLE GP-MODULAR (DIRECTION, DOWNSHIFT)  
3. 196-0109 [1] ROD  
4. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
5. 3E-3383 [1] WEDGE-RECEPTACLE LOCK (6-PIN)  
6. 114-3940 J [1] ROD  
  J   REQUIRED ONLY WHEN USED ON 2 & 3 VALVE SINGLE AXIS LEVERS
  M   METRIC PART
 

#SEBP32780748
 

211-3118: CONTROL GP-HANDLE

211-3118 CONTROL GP-HANDLE -DIRECTION, DOWNSHIFT
S/N AXN254-UP
i01831437 SEBP3278
2113118 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your 972G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 150-1293 M [2] SCREW-BUTTON HEAD (M4X0.7X12-MM)  
2. 114-3940 J [1] ROD  
3. 196-0109 [1] ROD  
4. 208-6097 Y [1] HANDLE GP-MODULAR (DIRECTION, DOWNSHIFT SWITCHES)  
  186-3735 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
5. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE & WEDGE)
6. 3E-3383 [1] WEDGE-RECEPTACLE LOCK (6-PIN)  
  J   REQUIRED ONLY WHEN USED ON 2 & 3 VALVE SINGLE AXIS LEVERS
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32780749
 

103-5526: CONTROL GP-MONITOR

103-5526 CONTROL GP-MONITOR -DIMMER
S/N AXN1-UP
PART OF 195-6256, 207-8618, 250-3754 WIRING GP-CAB
i00188199 SEBP3278
1035526 CONTROL GP-MONITOR Parts scheme
  For full view, you need register

Parts for your 972G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-9132 [2] SCREW-HEX FLANGE (6-32X0.187-IN)  
2. 3E-3383 [1] WEDGE-RECEPTACLE LOCK (6-PIN)  
3. 8T-8729 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
 

Information:

Tool Operating Manual
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Service Magazine
New Cab Air Filters Provide Improved Efficiency and Odor Reduction {7309, 7320, 7342}
2003/05/05
Nexus Retrofit Air Conditioning and Heating Parts for Other Than Caterpillar Construction Equipment and On-Highway Trucks {7320}
2004/05/17
An Air Conditioner Kit for Use When Servicing the Air Conditioning System Is Now Available {7320, 7320}
2012/08/24
Recent Changes to the R134a Refrigerant Air Conditioning Manuals Are Now Available for All Caterpillar Products {0374, 1802, 1805, 1807, 1808, 1809, 7309, 7320, 7322, 7343}
2014/07/17

Caterpillar Parts SIS Catalog 972G II :

203-9836 CANOPY AR-OPEN ROPS
185-7622 CAB AR-ENCLOSED ROPS
250-3733 CAB AR
ARMREST GP
8Y-5904 ARMREST GP
ARMREST GP
188-9820 ARMREST GP
ARMREST GP
162-8448 ARMREST GP
ARMREST GP
162-8447 ARMREST GP
ARM GP-WINDOW WIPER
214-7635 ARM GP-WINDOW WIPER
COMPRESSOR GP-REFRIGERANT
185-5876 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
220-1860 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
232-7376 COMPRESSOR GP-REFRIGERANT
CONDENSER & MTG GP-REFRIGERANT
180-8686 CONDENSER & MTG GP-REFRIGERANT
CONTROL GP-ELECTROHYDRAULIC
250-3194 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
251-0692 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-HANDLE
211-3118 CONTROL GP-HANDLE
CONTROL GP-HANDLE
211-3118 CONTROL GP-HANDLE

Truck sale:

Caterpillar 972GII, Construction
69,000 
Caterpillar 972GII, Construction
- Wheel Loaders
MILTON CAT
Caterpillar 972GII, Construction
77,500 
Caterpillar 972GII, Construction
- Wheel Loaders
BLANCHARD MACHINERY CO.
CATERPILLAR 972GII 2004
 
CATERPILLAR 972GII 2004
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
MACALLISTER MACHINERY
United States
CATERPILLAR 972GII 2003
 
CATERPILLAR 972GII 2003
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
CATERPILLAR 972GII 2005
$76,739 USD 
CATERPILLAR 972GII 2005
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
WESTRAC PTY. LTD.
- South Guildford - Western Australia
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.